Only one angle visible and no audio audible in multicam clip

Two source media clips are ProRes and one is AVCHD. Creating the multiclip seems to work in so far as making a clip with 3 camera angles in it. But only one camera angle's picture is actually visible; the other two are black frames. No audio is heard at all. All 3 source media clips have audio and that's how I synched them. I can't see any audio waveforms in the multicam clip in the sequence. With the multicam button activated, I can make the yellow rectangle move around as though something were there, but no picture. In the multicam creation dialogue, I chose track 1 audio for synch and camera 1 to be my audio source. I am using the latest version of PP CC.
I saw a long thread from June/July 2013 discussing a similar problem, but that supposedly has been fixed. What is happening here? I exported a Final Cut Pro 7 project with 2-angle multi-clips in it, imported that XML file into Premiere and the multiclips worked fine. This is a different project, but I have no idea why this is not working. The answer is not in the instructions.

I do wish the PDF would include the original, manual method of multicam sequence creation, preferably as the first option, as that method still works just fine and often works better than the 'auto' methods now hyped.
For interested readers, here's the process:
1. Create a sequence.
2. Add your clips.
3. Sync them up.
4. Create a second sequence.
5. Nest the first sequence into the second.
6. Right click that nested sequence and select Multi-Camera>Enable.
A very simple process that works every time.

Similar Messages

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>

These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Is 4/4 time the only time signiture available and what audio file type can will import using the media browser?

Is 4/4 time the only time signiture available and what audio file type can will import using the media browser?

latela33 wrote:
Is 4/4 time the only time signiture available
so far, yes, if you want more, be sure to let Apple know:
http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
(Let the page FULLY load. The link to your answer is at the top of your screen)
latela33 wrote:
what audio file type can will import using the media browser?
44.1k/16-bit AIFF, WAV, or Caf files

I just got an Apple TV. My TVs have only one HDMI port and I have my cable providor plugged into that. Any suggestions on how to set this up?

Repeating myself. I have received an Apple TV. All of my TVs have only one HDMI port and it is being used by my cable provider. Does anyone have suggestions on how to set up the Apple TV and still have access to the cable provider as well?

Not very elegant and shows that nothing is ever quite as simple as it seems. Thanks for the help though!

Only one song visible in List View

I can only see one song in list view with the album art visible. If there are 10 songs on the album they are all separated and show up individually. They used to be all together next to the album cover and now they are not. What do I have to do to get them together again?

Didn't solve the problem. If I have one album by an artist then all of the songs for that album are displayed next to the album art. But if there are multiple albums y an artist then only one or two songs are displayed next to the album art and each album shows up multiple times with with other songs, they are not all together and it is driving me crazy. Why would one album be listed multiple times with only one or two songs next to it? I can't figure out how to fix it.

How do I create a dropdown with three options so that only one is visible in a form (non-flowable)

I'm working on a form which needs to provides three options for the user out of a drop down list. When the user chooses one option, only that subform is to be visible. Two of the three subforms are text fields, and the third subform is a series of fields which are editable by the user.
How do i create a dropdown with three options in it, so that in each instance only one subform is visible? This needs to happen in the same space on the main form.

Hi Nellie,
Here is the form back to you. There were three main issues:
In order for dynamic behaviour, like showing and hiding, the form must be saved as a Dynamic XML Form in the save-as dialog.
While you can use a minus sign when naming objects and subforms, it will cause scripts to fail. I have changed the name of the subforms so that they now use an underscore.
The dropdown had specified values in the Object > Binding palette (1, 2, 3), so the script needs to use these in the if statements.
When sharing forms on Acrobat.com, the best option is to select the file in your workspace and then click Publish. This will make it available to anyone who has the published URL.
I hope that helps,
Niall

Only one spread visible on pasteboard (CS4)

Something weird happened to my indd file (a 128-page book) and although all the pages are all accounted for, only one spread is visible at a time: if I scroll up or down in the document window, there is nothing but blank space. I can access any other spread by double clicking in the Pages panel, and I can go forward or backward to the next spread using a keyboard shortcut I set up, but it is disturbing not to be able to scroll up or down to other spreads. I found a reference to this problem on another site (http://www.techplex.net/postst15582_weird-viewing-one-spread-per-pasteboard.html) where it was suggested that exporting as INX would fix the problem. I tried that and although opening an INX version did solve the scrolling problem, the text fell differently on the pages, so this was not a usable solution. Same thing for exporting as IDML. I don't know what accounts for the changes.
I'm hoping there's a simple way to get my scrolling back.

You've obviously got some corruption in your file. That is illustrated by the fact you are getting this problem, and also by the fact an inx or idml export fixes it. I would recommend biting the bullet and doing it otherwise something else could go wrong and your whole file might become unusable.
The text falling on different pages will be because of text reflow, sounds like the file was created in an earlier version and updated to CS4? The text wouldn't reflow according to CS4's different composer until you edited it, or did a inx/idml conversion like this.

Field editable in FB02 for only one document type and user

Hi:
I have a question about editing a field and I hope you can help me. I need to make a field editable in FB02, but only for one document type and two users. The field is BSEG-ZFBDT, Baseline payment dte.
I have tried in ‘Document Change Rules’, make this field editable when line item not cleared, but it works for all document types and users.
Please, any idea?
Thanks in advance for your time.
Best regards.

Hi,
You have to write a ABAP code to achieve this.
Validation is another Option where you can mention that value is allowed in the Baseline Date field only if the User and Document type value satisfies.
BR
Amitash

HT1171 I have the apple wireless key board. There is only one delete key and it deletes all data to the left side of the cursor. Where is the delete function for deleting letters that are on the RIGHT side of the cursor?

I have a new wireless apple keyboard. I can only delete items that are to the left of the cursor using the delete key. What key do I use to delete items that are to the right side of the cursor? I have only one delete key.
My old apple wired keyboard has 2 delete keys that enabled me to easly delete data on either side of the cursor.
Thanks

Fn + Delete

Audio adjustment in multicam clip

I have a multicam clip in which the and I am trying to reduce the "squech" from a P.A.'s feedback.
I have four cameras, and the section I'm working on has the video from Camera 3 and the Audio is from Camera 3 as well. This is not the case with ALL of the P.A.'s feedback occurances, however.
I tried to isolate the section of the multicam in the timeline, then chose "Expand Audio and Video," but when I tried to lower the volume in the section, it seemingly has no effect.
I tried doing the same only chosing "Expand Audio Components," but got the same results.
When I expanded the clip, it displays an "2" within a speaker icon (?), then the date and time of the clp then "a1." Does that mean that I'm trying to adjust the audio from Camera 1, even though I'm not using that?
If you can suggest the workflow in order to isolate and adjust the audio used in a multicam clip, I'd really appreciate it.
Thanks in advance,
Gary

I would think it would be easiest to open the muticlip in the Angle Editor where you would have a clear view of each individual angle and its audio.
Russ

Manually balance audio tracks in Multicam Clip

I have an audio file taken from the sound board for a theatrical performance that I videoed on two cameras. The audio on this file is clean, but weak in comparison to the ambient audio I recorded with my camcorders, and alone is not adequate. How can I best juice that audio track -- I have used the auto balancing as I understand it, but that understanding may be inadequate? The mix of all gives the fullest sound, but I don't think the audio source which should be best on voices is really contributing much. Can I do this in the editor for the multi clip, or would it be best for me to enhance it separately and re-create the multi cam clip with that enhanced audio file?
Ernie

I have marked this solved, even tho' I have not yet attemped to follow the advice. What I think is solved, given your knowledge Tom, is that I have not missed something in the editing of such a multi cam clip with respect to audio. I will need to figure out how I want to enhance the audio clip before jump in, and what tools I have available.
Ernie

Dreamweaver Panels - Only one panel visible at a time, others get obscured even with Always On Top.

I have a problem with my Dreamweaver MX, and it is that I can only see one panel at a time, any other open panels get obscured. For example, with the work space maximized, and having the properties and behaviors panels open, I can only see one of the panels at the same time. If I click on any area of the work space each open panel will display and with the next click the other will display. If I make the work space smaller then the whole area of my screen, and move any open panels outside of the Dreamweaver work space, only then they will stay visible. I know this is not normal behavior, because I used to be able to see all the open panels simultaneously, with the work space maximized to use all the screen area. I went to Preferences> Panels> Always On Top, and all the checkmarks are still set, so as to keep all panels on top at all times, but this does no longer be the case. Can someone tell me what happened here, and how I can get back to being able to see all the open panels? BTW, I tried installing older version of Dreamweaver 4, and the same thing happens to both installed versions. This is extremely annoying!
Thanks. -Al.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

I have only one window open, and get a warning when I exit that "You are about to close multiple tabs."

I have Firefox 8 for Vista, and according to the "About" screen, Firefox is up to date. I heard this might be a problem with my plugins, so I updated them all. Still a problem. I disabled all my plugins and add-ons and still got the message.

ONLY 8 people have this problem?
Look, virtually all Mozilla's potential users are coming from Internet Exploder, which gets this ALMOST RIGHT, while FireF*x does it totally wrong. Including in webmail: there's no way I could have got to this forum without leaving 4 windows active or closing everything, including closing my mail without logging out.
ONLY 8 PEOPLE? How many thousand simply throw up their hands & uninstall yr f- nurdware over this one single issue? Not to bore you with details, but I'm hardly unsympathetic to open sources that don't look like the best argument for Micros**t and Google hegemony.
Btw, I said they get it -almost- right... It would be really nice if IE or >somebody< offered a checkbox to NEVER close multiple tabs. Look, if this bug disguised as a feature is useful to a few nurds by all means keep it as an advanced option, but PLEASE set up FireFox so it at least defaults to the real world.

How to diable only one field enabled and other fields disabled for one user group?

Hi,
I have a form contains many fields. A group of users can add items using that form.
As per the user requirement I have created a filtered view and that filtered view can be seen by some other sharepoint user group but as per their further requirement the new sharepoint user group is only allowed to update Remarks field. All other fields
should be disabled for them.
In my idea, I have to create multiple forms and in one of it except Remarks field all should be disabled but I am unable to assign multiple forms to a single list.
Or how to make Remarks field enable to this user group and for other admin user group all fields could be enabled.
Hope I have expressed my question correctly.
Any solution would be appreciated.

There is no Out of the Box way to set permissions on each column, primarily due to the performance impact. The following thread provides some options,
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0794232-9bab-4cea-91d8-f311a793a863/how-to-set-column-wise-permission-in-sharepint-list-in-sharepoint-2010?forum=sharepointadminprevious
Dimitri Ayrapetov (MCSE: SharePoint)

Only one angle visible and no audio audible in multicam clip

Similar Messages

Maybe you are looking for