Only One Capture Format Option

First - I am a total newb.
Now that that is out of the way -
I am learning Premiere CS5 and am wondering why in General Settings, I have only have the DV option under Capture Format. Shouldn't I also have HDV and Quicktime?
Help!

Thank you! Attached is what I've done to set up my new project. I am concerned because I am learning from Lynda.com and there seems to be a some differences in options for setup.
Jenna Sullivan
VisitorsTVNetwork Northeast
(781) 500-0471
www.vtvne.com
[email protected]

Similar Messages

Only one display resolution option for monitor

I just installed a new SSD in my computer, and then installed SL onto the drive. I have an Asus monitor, and Display Preferences on the SL install on the older HD gave me a variety of screen resolutions to choose from. But on the SSD install I only have one option (1280x800). What do I need to do to get a wider range of resolution options (including one that will look right with this monitor)? Thanks.

Which computer? What did you use to install Snow Leopard, a retail version or the disks from another machine?

Is Quicktime the only slideshow export format option?

I'm to give a presentation this Thursday night (2-24-2011) in Mac Powerpoint format that will incorporate someone else's [short] presentation. However, I just found out that this person used iPhoto's Slideshow feature but wants to be able to stop and start using my laser pointer w built-in slide control.
He has about 90 photos/slides or else I'd have simply told him to just export each photo as a low-rez jpeg. I've never used the slideshow feature in iPhoto so I'm wondering if there's another export option that doesn't require the actual app, Quicktime format, or exporting 90 images?

You can only export as a QuickTime Movie or as 90 discreet images.
Regards
TD

Select / how to select row that meet only one of select-options

Hello ,
I am developing rapport in release 6.0.
On the screen I have three select -options s1 , s2 , s3
I db table I have several entries with values in f1 f2 and f3
f1 f2 f3
1 | 2 |
3 | 4 |
5 | 6 |
a | b | c
When I enter , on screen 1 in S1 , and c in f3 i do not get any data in internal table . Obviously program is looking
for the row that satisfies   both criteria .
My question is what would be the way to get for same screen entry all row satisfying firs criteria and all lines satisfying
second criteria independently . SO i would like to have row 1|2 and row a|b|c if user enters , value "1" in s1 and value "c" in s3.
Thanks
source code .
select * from db_tab
into corresponding fields of table Itab
where f1 in s1 and
            f2 in s2 and
            f3 in s3.

Hello ,
I was thinkinf of OR , but i doesnt work .
When use enter only S3 and leave empty S1 the resul will be ALL entries from db table .
S1 = initial
S = c
result is
1|2
3|4
5|6
a|b|c
Thank you

I formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

Follow these instructions:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

DV capture format is the only option... Where's HDV?!

In Premiere CS5, When I start a new project or try and capture into a project built for HD videos, I can only capture footage in DV mode.
This means I end up with footage at 720x576 instead of the 1920x1080 I'm looking for.
This is what I get when trying to choose the capture format:
I'm using a MacBook Pro, with Adobe Premiere Pro CS5.
I'm capturing from a Sony HVR-Z7E Camera (but this shouldn't make a difference as I'm not getting the choice even before I connect my camera.

1. Recreated the prefrences and launch Premier again.
2. Created a new account and also enabled the root account and then launch the application.
More Info- http://kb2.adobe.com/cps/408/kb408993.html

Only One Label is Formatting as Percent in a Pie Chart - Help

I'm having trouble with a pie chart. I have only two values in the chart and have added labels. When I preview the report both labels display correctly. However, when I right-click the labels in design view and select the #PERCENT option
from the Series Label Properties and the preview the chart, only one label is actually formatted as a percent.
I don't get it?
I've followed the steps in other forum questions to get around this but nothing works. I am in a hurry and really need this to work properly, can someone spell this out for me?
This is what I see in preview currently:

Hi Avenue,
Glad to head that your issue has been solved. Thank you for sharing.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Premiere Pro Can Capture Only One Stereo Pair?

I'm thinking of getting PPro CS 5.5, so I'm reading the Help file to learn about it first and I came across this listed under "Importing Digital Audio":
1) "Although the DV format can record two independent stereo audio pairs, Premiere Pro can capture only one stereo pair.
It may be possible to select either stereo pair 1, stereo pair 2, or a mix of both, depending on the DV hardware you use."
Does this mean if I have 2 mic's connected to my camera, PPro can only capture 1 stereo pair or the other or a "mix" of both? What does that mean?
Would I be able to edit both stereo pairs as separate tracks on the timeline?
Any help would be greatly appreciated.

Harm,
The specs on the Canon HV20 say DV can do 2 channels in 16 bit mode and 4 channels in 12 bit mode.
But I want to start using HDV, which can only do 2 channels in 16 bit mode. HDV uses MPEG-1 Audio Layer 2, 16 bit, 48 kHz, transfer rate 384 kbps (2 channels).
The DV settings are PCM digital sound with 2 modes: 16 bit, 48 kHz/2 channels and in 12 bit mode is 32 kHz/4 channels.
Is a "stereo pair" 2 channels?

HDV not showing as option under capture format in CS5

DV is the only option in the drop down box under capture formats in CS5. Is there a way to activate the HDV option?
Thanks

Are you using a trial version of CS5????
MPEG2 files, such as that used in HDV streams, are not supported by the trial versions.

Only DV and HDV in Capture Format list!

I've
watched some of the tutorials showing a LONG list of available capture formats, when set
ting up a project- Why does my purchased
DL only show DV and HDV as my only two choices?

Why doesn't this capture list show up when setting up a project?
Are you reading what we're writing here? The marketing literature you're referring to makes a canonical mistake in its reference to "capturing" formats like RED, Sony XDCAM, XDCAM EX, XDCAM HD, Panasonic P2, or AVCHD. Those are all tapeless formats that are imported or ingested, NOT captured. Therefore, the capture format doesn't make one bit of difference when editing those formats. Just import the files and be done with it.
Definitely read the whole help file, but focus particularly on this section: Importing, transferring, capturing, and digitizing

How do I capture tape-based media to my external hard drive? There is only one firewire 800 port on the back of my I mac. The manual says to import tape footage directly into fcpx, but then I lose my external hard drive. thanks for your help.

In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive? There is only one firewire 800 port on the back of my I mac. The FCPX manual says to import tape footage directly into final cut, which works, but then I lose my external hard drive Do I have to import it into an event, then copy it over to an external hard drive? On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media. How is that done? I can only get either the camera to appear OR my external hard drive. thanks for your help.

Thanks for your response, but that doesn't solve the problem. Yes, the LaCie hard drive has 2 firewire ports-
I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
does not appear. It only shows up when I DIRECTLY import the footage via firewire. ????

Need to capture multiple image paths for responsive design when only one will be displayed at a time

I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

Hi,
You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
/content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
I hope that it hepls you.
Regards,
Adam

How do I create a dropdown with three options so that only one is visible in a form (non-flowable)

I'm working on a form which needs to provides three options for the user out of a drop down list. When the user chooses one option, only that subform is to be visible. Two of the three subforms are text fields, and the third subform is a series of fields which are editable by the user.
How do i create a dropdown with three options in it, so that in each instance only one subform is visible? This needs to happen in the same space on the main form.

Hi Nellie,
Here is the form back to you. There were three main issues:
In order for dynamic behaviour, like showing and hiding, the form must be saved as a Dynamic XML Form in the save-as dialog.
While you can use a minus sign when naming objects and subforms, it will cause scripts to fail. I have changed the name of the subforms so that they now use an underscore.
The dropdown had specified values in the Object > Binding palette (1, 2, 3), so the script needs to use these in the if statements.
When sharing forms on Acrobat.com, the best option is to select the file in your workspace and then click Publish. This will make it available to anyone who has the published URL.
I hope that helps,
Niall

I am doing a book. Can I select the option of 13 photos on a page, put only one photo on the page in the middle box and expect the page to be printed with only that picture surrounded by white?

I am doing a book. Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?

No
All photos frames must contain photos or you can not order the book
LN

Have you chosen only one option button at a time

Hi...
    I have got a problem while working with the option button in screen painter.I have three option buttons. In Run time, I want to select only one option button, mean while the other two option buttons should not be selected.
~
Thank You in Advance
Roseline Christina. B

Hi,
Please check the following
To select an OptionBtn item, the item must be bound to a data source (UserDataSource or DBDataSource) using OptionBtn.DataBind
The following is the sample to add 2 option buttons and group them.
Dim optBtn As SAPbouiCOM.OptionBtn
    Dim oFrm As SAPbouiCOM.Form
    Dim oItem As SAPbouiCOM.Item
    Dim oUserdatasource As SAPbouiCOM.UserDataSource
    ' set oFrm = ..
    'Option 1
    Set oItem = oFrm.Items.Add("BD_rbRes", it_OPTION_BUTTON)
    oItem.Left = 240
    oItem.Top = 10
    oItem.Height = 16
    oItem.Width = 220
    Set optBtn = oItem.Specific
    optBtn.Caption = "Button One"
    Set oUserDataSource = oFrm.DataSources.UserDataSources.Add("BD_resDS", dt_SHORT_TEXT,1)
    optBtn.DataBind.SetBound True, , "BD_resDS"
    'Option 2
     Set oItem = oFrm.Items.Add("BD_rbPost", it_OPTION_BUTTON)
     oItem.Left = 240
     oItem.Top = 30
     oItem.Height = 16
     oItem.Width = 220
     Set optBtn = oItem.Specific
     optBtn.Caption = "Button Two"
     oItem.Visible = False
     Set optBtn = oItem.Specific
     optBtn.GroupWith ("BD_rbRes")
Hope this helps,
Vasu Natari.

Only One Capture Format Option

Similar Messages

Maybe you are looking for