Only one channel from Tascam US-122

On my Mac OS X [10.4.2] I just connected the Tascam US-122 audio interface.
I did not upload any of the recording software like Cubase that came with it. The problem is that when I play back anything from ITunes or Garageband, I only get one channel of the stereo recording. This happens both trhough headphones or through line out connected to my stereo. MIDI works fine, but there seems to be only channel playing back at all times. Any help? The wait times for Tascam help are unbearable.

Check to see if your resolution and sample rate settings are set for 2 channel audio. Double click on your Macintosh HD and follow this string to where the settings are set:
Applications/Utilities/Audio MIDI Setup/Audio Devices/System Settings/Default Input: (your Tascam US-122)/Properties For: (your Tascam US-122)/Audio Input/Format/44100.0 Hz 2ch-16bit. Also check your Default Output/Audio Output settings for your Tascam US-122, they should also be set at 44.1 kHz and 2ch-16bit.
Also if you are going to install Cubase LE, especially if you have OS X Tiger (10.4.x), be sure that you have Cubase LE 1.08, because there is an installer incompatibility with Tiger and Cubase LE 1.07. There should be somethimg about this incompatibility at the Tascam website. Or better yet, I would recommend Logic Express 7. It interfaces seamlessly with GarageBand. Besides they have to give Cubase LE away free because being originally engineered for PC's, and then re-engineered for Mac as an afterthought, it is left-brain difficult to learn and work with. Apple Logic is much more right-brain user friendly.

Similar Messages

  • Ipod classic sound from only one channel

    My 80GB Ipod classic has sound from only one headphone. Same problem when docked so it's not a headphone or socket problem. It's as if only one channel is working. Any ideas?

    Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
    Clinton

  • Can get sound from only one channel

    I am having trouble with my sound.  I am able to get sound fron only one channel.  Is this something I
    can fix or do I need to go to an apple store?

    Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
    Clinton

  • Why only one channel of sound in sequences?  Please someone try this quest

    When I add a sequence to a sequence, I have only one channel of sound but, when I open that sequence I have 2 channels of sound.
    Is it a sequence setting and if it is I see:
    outputs 2
    downmix 0
    grouping: Stereo selected
    Dual mono not selected.
    I swith these around a bit but get no change.
    My raw footage say "2 Mono" from my Sony DSR PD-150 at 16 bit, 48 khz.
    I usuall use one channel for camera sound and 2nd channel for mic.

    the number of audio channels that your nested sequence will contain is the same as the number of audio outputs you have selected for that sequence ...
    for example, if you create a sequence with 10 tracks of audio, but have only set the sequence to have 2 audio outputs, then when you nest that sequence the nest will have only 2 tracks of audio ... change the audio outputs to 4, or 6, or 8, or 10 etc regardless of how many tracks you actually use, and the sequence, when nested, will have the same number of audio tracks as the sequence has audio outputs
    ... ok, so that explains the relationship between audio outputs and the number of tracks of audio that a nested sequence contains
    so why are you getting only one channel of sound when you edit it in to another sequence? my guess is that you are only patching 1 channel ... load the source sequence into the viewer (drag and drop), now check in the patch bay area at the left of the timeline window to make sure that your a1 to A1 and a2 to A2 connections are not broken ... and edit it in.
    cheers
    Andy

  • Only one channel working - fixable?

    Recently my ipod starting playing only one channel through headphones or a speaker jack - eg I can hear only whatever is coming through the left side speaker. I've verified that the problem is with the ipod, not the headphones. However, if I put pressure from a specific angle on the headphone cord right above where it connects to the ipod, both L and R channels work. This goes away again when the pressure is released.
    Has this happened to anybody else? Is it a fixable problem?
    Thanks!

    You need to replace the headphone jack on the iPod.

  • Audio - only one channel

    Hi
    I'm recording from my analog cassette deck to my mac os x 10.9.5, but get only one channel on audacity and garage band.
    deck out - headphone jack -rca to rca mini jack mac sound input
    I did read several posts, but to no avail.
    I did play with AUDIO MIDI setup
    I did play with SOUND ( SYSTEM PREFERENCES )
    please help
    thanks in advance
    peace

    Come on... It's just like a usb turntable, only a little better quality. What steps would you use to troubleshoot one of those?

  • Please Help - Audio Exporting-Only one channel

    When I export the audio from Final Cut, I get only one channel of audio ( right side). This happens with all the AC3 and PCM audio settings.
    All of the settings are correct in Final Cut. I have dual output audio on the meters and playback. I've also done a complete troubleshooting check on my playback system to make sure that everything is working properly. It is. I tunes plays everything back in stereo as does final Cut.
    Any suggestions? I'm really behing the 8ball at this point.
    Thanks,
    Bigsul
    g5   Mac OS X (10.4.7)  

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Exported Audio Voiceover Only One Channel

    I created a quicktime screen recording for a screencast/tutorial using QuickTime X.
    Brought that clip into FCPX, added some music, a few transitions and some motion graphics/titling.
    Exported to h.264 and I'm getting stereo from the music track, but the voiceover is only on one channel.
    So I go to audio settings and batch change everything to Mono. I noticed that there are surround sound settings, that is, multiple audio 'tracks'.
    Export and only one channel.
    When I monitor in FCP X I heare the audio out of both channels.
    When I export it using FCP X H.264 to quicktime: Audio Only On One Channel
    Killing me.
    So I I loaded the H.264 exported clip into QuickTime Pro 7
    Anyway, In QT 7 I changed all the settings for audio (properties) and turned every channel that showed up to mono, saved as and the QuickTime file now plays voiceover audio on both channels. Yeah!! So it seems.
    So I save as in QuickTime 7 and when I play in QuickTime 7 I get the Soundtrack/Voice over audio on two channels.
    But when I open it in QuickTime X (or upload the file to YouTube/Vimeo) the voiceover only comes through on one channel. Keep in mind that the stock Music does play through both channels!

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Why does my nested sequence have only one channel of audio?

    Hi,
    Working in Prem Pro CC on my Mac Pro.
    I have  a number of interviews, each shot with 3 cameras and with audio from a separate audio recorder. The audio has two channels, Ch1 has the boom mic and Ch2 a radio mic.
    I created a sequence, placed the audio into channels 1 & 2 (they are linked) before placing the video tracks onto timeline tracks 1-3. Everything's synced nicely and so I nested the shots and then I enabled multicam on the nested sequence.
    However, now when I edit the nested sequence into my edit sequence, it has only one channel of audio. I tried Modify>Audio Channels but within that page, in the option to select 'Source Channels' the options are "None" and "Channel 1".
    How do I get my nested sequence to place both audio channels into my edit sequence?
    Any help much appreciated.

    Nevermind folks, I figured it out. I had my render control settings set to Apple Pro Res on some timelines.

  • "Can I select only one page from a PDF document to convert to an excel doc. ?"

    "Can I select only one page from a PDF document to convert to an excel doc. ?"

    No, so extract one page, then convert.

  • I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    bassvid wrote:
    Thanks...now I need to do something about the iPod.
    I'm not sure which version iPod you have, but I just checked my iPod nano (current generation) and it also has a Mono Audio setting in Settings>General>Accessibility.

  • Only one channel plays

    I am only getting sound out of one channel of the ipod. I have tested this via the ear buds, but also by routing the sound to my stereo -- only one channel has any sound on it. Is there some setting or something simple that can be done to fix this?

    i dont beieve there is anything you can do. but im not an expert, so take it into an apple store and ask someone for help.
    (some key information here would be what model it is so others know about it).
    HP Media center PC   Windows XP  

  • Audio Channels. Only one channel is playing

    For some reason only one channel is playing a signal on a couple of clips. The other clips are fine.
    All I did to the clips in question was increase the DB levels.
    How can I adjust it so that I get signals on both audio channels?
    Thanks

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • HOW TO TRANSFER ONLY ONE APPLICATION FROM AN OLD MACHINE TO A NEW ONE

    HOW TO TRANSFER ONLY ONE APPLICATION FROM AN OLD MACBOOK TO A MACBOOK PRO ?

    THERE IS AN EASY WAY TO TRANSFER SONGS & PHOTOS
    BETWEEN IPOD & IPHONE
    SIMPLY USE TRANSPOD APPLICATION ON BOTH DEVICES
    THEN
    DO IT
    (U HAVE TO BE ON THE SAME NETWORK)

  • How can I transfer only one song from itunes to my iphone?

    How can I transfer only one song from itunes to my iphone without sync ( the whole library)?

    Untick every thing you dont want to transfer, tick only the ones you do want to transfer.

Maybe you are looking for

  • Final Cut Pro 7

    Good morning...,, well, trying to be. I'm running FCP 7.0.3 on a MacBook Pro 10.10.2. I have footage of old 16mm film compiled to DVD by Walmart, from which I pulled various file formats (.avi, .mov & .m4v. I notice a slight loss in saturation and fo

  • One Library - Multiple Computers

    I searched a little bit on here, but couldn't find a good solution. Hopefully you can help me out. Here is what I currently have: - iMac - 2 MacBooks - Time Capsule - Apple TV - iDisk - Drobo I want to store my iPhoto library and iTunes library in a

  • ESS Leave Request - Portal Runtime Error when the "Cancel" button is hit

    We have configured the Leave Request application, created a custom workflow, created security roles, and we are now testing in our quality environment.  We are encountering a very strange "Portal runtime error" which we cannot resolve - When you come

  • Cleaning the Script Menu in Photoshop

    Is there a way to clean the script menu in Photoshop? I'm launching most of my scripts from shortcuts on my Wacom Tablet and from Windows Explorer, and everytime I do one of those two options, since I'm not launching the script from the script menu,

  • Need Help About AC or battery or pc :(

    Hello! i am kinda new to the forum,i have GT70 2pe dominator pro laptop(bought from ibuypower) When i play demanding games,my ac unplugs itself from the laptop i dont know what to do ,i updated ec,bios,did the ec reset,battery calibration(from msi su