Only one channel of audio is coming out of headphone jack

Very frustrating have tried many things, resetting pram, shuting down computer and unplugging and the paperclip thing.  Weird part is my audio interface has the same problem through its headphone jack

Come on... It's just like a usb turntable, only a little better quality. What steps would you use to troubleshoot one of those?

Similar Messages

  • Why does my nested sequence have only one channel of audio?

    Hi,
    Working in Prem Pro CC on my Mac Pro.
    I have  a number of interviews, each shot with 3 cameras and with audio from a separate audio recorder. The audio has two channels, Ch1 has the boom mic and Ch2 a radio mic.
    I created a sequence, placed the audio into channels 1 & 2 (they are linked) before placing the video tracks onto timeline tracks 1-3. Everything's synced nicely and so I nested the shots and then I enabled multicam on the nested sequence.
    However, now when I edit the nested sequence into my edit sequence, it has only one channel of audio. I tried Modify>Audio Channels but within that page, in the option to select 'Source Channels' the options are "None" and "Channel 1".
    How do I get my nested sequence to place both audio channels into my edit sequence?
    Any help much appreciated.

    Nevermind folks, I figured it out. I had my render control settings set to Apple Pro Res on some timelines.

  • ONLY ONE CHANNEL OF AUDIO WITH SONY PMW-200

    Hi,
    When I automate to sequence using video shot on my Sony PMW-200 I only get one channel of audio, when the preset in Premiere clearly states 8 channels of 24 bit audio. If I drag a clip to the timeline all 8 channels are there, but then I have to trim the beginning and end of each clip in order to do transitions, which would take forever on a wedding video. There must be other PMW-200 users who have this same problem. I am shooting in UDF mode 422 at 50 mb/sec on the Sony and just updated my Premiere CS 6.
    Thanks,
    Ed

    similar question, I found a thread that may solve your problem: Sony PMW-200 file import into Premiere Pro CS6 only get 1 Ch. audio, you can go for a look. Or you can try some converters to help you.      Handbrake, any video converter, ffmpeg,imixmxf, transcode them first, then reload into premiere.

  • Only one channel of audio recorded with external USB audio interface on DV6604nr

    I only get on channel of audio when i hookup my Behringer UCA202 to my dv6604nr
    vista 32 sp2 . The Behringer takes analog 2 channel audio and converts it to a digital signal.
    This is using the Audacity software. The hardware and software check fine, though i tested them with an xp system.
    Are there trouble shooting tips for these issues. I've updated the Audacity software and the usb drivers say their up to date. (?)

    Come on... It's just like a usb turntable, only a little better quality. What steps would you use to troubleshoot one of those?

  • Importing only one channel of audio from two-channel video

    I'm diving back into iMovie 6 after a long hiatus, so forgive me if this is a dumb question, but my search hasn't turned up an answer. I have two channels of audio on the video I'm importing. Is it possible to split the two channels in iMovie once the video is imported, or do I have to figure out how to have the video camera feed only the audio channel I want to import? Thanks!

    You have to figure out how to have the video camera feed only the audio channel I want to import!

  • Volume won't work - infrared light coming out of Headphone jack

    I was using my headphones for a bit on my MBP and now that I took them out of the MBP, I noticed I can't adjust volume. Actually I cant hear anything. I can see infrared coming out of jack. Whats going on here?

    Hi NittanyAgent,
    Inside the audio output socket on the MacBook Pro (and MacBook) there is a small microswitch which is enabled when you insert the headphone jack. Of course, when you remove the jack it's meant to deactivate thus allowing you to use the internal speakers again. It appears that, in your case, it's stuck in the active position which is why you are seeing the red L.E.D. light shining through.
    Try inserting and removing the headphone jack a few times. Others have also had success by, carefully, using a paperclip or toothpick.
    If the above fails you may have to visit your local Apple Store or independent Apple Authorised Service Provider.
    Kryten

  • Please Help - Audio Exporting-Only one channel

    When I export the audio from Final Cut, I get only one channel of audio ( right side). This happens with all the AC3 and PCM audio settings.
    All of the settings are correct in Final Cut. I have dual output audio on the meters and playback. I've also done a complete troubleshooting check on my playback system to make sure that everything is working properly. It is. I tunes plays everything back in stereo as does final Cut.
    Any suggestions? I'm really behing the 8ball at this point.
    Thanks,
    Bigsul
    g5   Mac OS X (10.4.7)  

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Audio - only one channel

    Hi
    I'm recording from my analog cassette deck to my mac os x 10.9.5, but get only one channel on audacity and garage band.
    deck out - headphone jack -rca to rca mini jack mac sound input
    I did read several posts, but to no avail.
    I did play with AUDIO MIDI setup
    I did play with SOUND ( SYSTEM PREFERENCES )
    please help
    thanks in advance
    peace

    Come on... It's just like a usb turntable, only a little better quality. What steps would you use to troubleshoot one of those?

  • Exported Audio Voiceover Only One Channel

    I created a quicktime screen recording for a screencast/tutorial using QuickTime X.
    Brought that clip into FCPX, added some music, a few transitions and some motion graphics/titling.
    Exported to h.264 and I'm getting stereo from the music track, but the voiceover is only on one channel.
    So I go to audio settings and batch change everything to Mono. I noticed that there are surround sound settings, that is, multiple audio 'tracks'.
    Export and only one channel.
    When I monitor in FCP X I heare the audio out of both channels.
    When I export it using FCP X H.264 to quicktime: Audio Only On One Channel
    Killing me.
    So I I loaded the H.264 exported clip into QuickTime Pro 7
    Anyway, In QT 7 I changed all the settings for audio (properties) and turned every channel that showed up to mono, saved as and the QuickTime file now plays voiceover audio on both channels. Yeah!! So it seems.
    So I save as in QuickTime 7 and when I play in QuickTime 7 I get the Soundtrack/Voice over audio on two channels.
    But when I open it in QuickTime X (or upload the file to YouTube/Vimeo) the voiceover only comes through on one channel. Keep in mind that the stock Music does play through both channels!

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Only getting one channel of audio with mic HELP

    I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
    Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
    I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
    On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

    You're welcome.
    The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

  • Audio Channels. Only one channel is playing

    For some reason only one channel is playing a signal on a couple of clips. The other clips are fine.
    All I did to the clips in question was increase the DB levels.
    How can I adjust it so that I get signals on both audio channels?
    Thanks

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Why only one channel of sound in sequences?  Please someone try this quest

    When I add a sequence to a sequence, I have only one channel of sound but, when I open that sequence I have 2 channels of sound.
    Is it a sequence setting and if it is I see:
    outputs 2
    downmix 0
    grouping: Stereo selected
    Dual mono not selected.
    I swith these around a bit but get no change.
    My raw footage say "2 Mono" from my Sony DSR PD-150 at 16 bit, 48 khz.
    I usuall use one channel for camera sound and 2nd channel for mic.

    the number of audio channels that your nested sequence will contain is the same as the number of audio outputs you have selected for that sequence ...
    for example, if you create a sequence with 10 tracks of audio, but have only set the sequence to have 2 audio outputs, then when you nest that sequence the nest will have only 2 tracks of audio ... change the audio outputs to 4, or 6, or 8, or 10 etc regardless of how many tracks you actually use, and the sequence, when nested, will have the same number of audio tracks as the sequence has audio outputs
    ... ok, so that explains the relationship between audio outputs and the number of tracks of audio that a nested sequence contains
    so why are you getting only one channel of sound when you edit it in to another sequence? my guess is that you are only patching 1 channel ... load the source sequence into the viewer (drag and drop), now check in the patch bay area at the left of the timeline window to make sure that your a1 to A1 and a2 to A2 connections are not broken ... and edit it in.
    cheers
    Andy

  • I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    bassvid wrote:
    Thanks...now I need to do something about the iPod.
    I'm not sure which version iPod you have, but I just checked my iPod nano (current generation) and it also has a Mono Audio setting in Settings>General>Accessibility.

  • Only one channel working - fixable?

    Recently my ipod starting playing only one channel through headphones or a speaker jack - eg I can hear only whatever is coming through the left side speaker. I've verified that the problem is with the ipod, not the headphones. However, if I put pressure from a specific angle on the headphone cord right above where it connects to the ipod, both L and R channels work. This goes away again when the pressure is released.
    Has this happened to anybody else? Is it a fixable problem?
    Thanks!

    You need to replace the headphone jack on the iPod.

  • Only one channel plays

    I am only getting sound out of one channel of the ipod. I have tested this via the ear buds, but also by routing the sound to my stereo -- only one channel has any sound on it. Is there some setting or something simple that can be done to fix this?

    i dont beieve there is anything you can do. but im not an expert, so take it into an apple store and ask someone for help.
    (some key information here would be what model it is so others know about it).
    HP Media center PC   Windows XP  

Maybe you are looking for

  • How to get name of a column in a RecordGroup

    Function GetColumnName(pSQL Varchar2, pColumnNo ) return Varchar2 is rg_name VARCHAR2(40) := 'rg_tmp'; rg_id RecordGroup; cl_name; BEGIN rg_id := Create_Group_From_Query( rg_name, pSQL); -- How to get columnname i.e. 2 nd column or ( pColumnNo) retur

  • What will happen if i reset my network settings?

    I have a iphone 4 and i dont know wether to reset my network settings, im not sure what will happen/: also its not letting me open the app store 'no internet connection' but there is ? 3G

  • Is it possible to send user id inplace of Author column in SAP inbox..

    Hi Xperts, Is it possible to send user id in the column of 'Author' of SAP Inbox. For example: Whenever the PR/PO is created Workflow is getting triggered. Now agent gets the workitem in to his/her inbox. In general,  Author column of SAP inbox is em

  • Multiple POP accounts: Can I set up separate mail windows

    New mac user. I was able to switch identities using Outlook Express on my PC so that multiple users' mail were not downloaded when one user logged on. My desire is to not see other people's email, nor they mine. Is there a way to accomplish this? lma

  • Is there any way to get photos off of my Apple TV?

    The hard drive on my Macbook crashed earlier in the week and the only other place I had some of my photos is on my Apple TV. Is there anyway to retrieve these from the hardrive?