Only one HDMI port- how to hookup Apple TV?

I have my Comcast box plugged into the only HDMI slot on my Panasonic TV. How do I hook up my Apple TV box?

How do I hook up my Apple TV box?
You could invest in an HDMI switcher. I used the Rocketfish model from Best Buy with my plasma HDTV before finally updating my AV receiver. It has auto-switching (which works better than my old auto-component switcher) but also comes with a remote control for those who prefer manual control.

Similar Messages

  • I just got an Apple TV. My TVs have only one HDMI port and I have my cable providor plugged into that. Any suggestions on how to set this up?

    Repeating myself. I have received an Apple TV. All of my TVs have only one HDMI port and it is being used by my cable provider. Does anyone have suggestions on how to set up the Apple TV and still have access to the cable provider as well?

    Not very elegant and shows that nothing is ever quite as simple as it seems. Thanks for the help though!

  • I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.

    I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
    To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
    ?Is there any Apple TV HDMI port voltage?
    When using a HDMI auto switch to connect two devices to a HDMI TV, the
    Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
    Do you know of any other solutions? Componets? Actual expierances?
    Full text below.
    Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
    Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
    http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
    Thanks for any help. Sincerely,
    HDMI auto switch?

    Hi Erico,
    I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
    Do you have any other ideas?
    Many many thanks,
    Louise

  • I only have one HDMI port on TV and it is in use?

    I only have one HDMI port and it is being used. How do I hook up Apple TV?

    Buy a new TV with muliple HDMI ports or buy an HDMI cable splitter.

  • How to connect many devices with only one FW800 port in iMac?

    Hi,
    I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
    My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
    (1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
    (2) Connect the d2 Quadras to one port of the FW800 hub
    (3) Get a FW 800 to FW 400 cable
    (4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
    Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
    Will

    In addition to your listed considerations, you should consider the following.
    Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
    There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
    So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
    Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives.

  • I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT?

    I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT? Is it a switch or a splitter?  And where is it best to buy one?  Thanks!

    Welcome to the Apple Community.
    You need an HDMI switch.

  • One HDMI port and Apple TV

    OK, I thought this would be simple but it's proving not to be. Anyway, I want to connect Apple TV to my TV that has just one HDMI port that is being used to transmit to the digital cable box. I did get a 5-port HDMI switcher, but I'm perplexed as to what goes where. Does anyone have any directions on this setup? Much thanks in advance.

    The ATV and cable box connect to the switcher.
    An HDMI cable from the output on the switcher goes to the tv.

  • I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

    I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

    Deauthorize all, then authorize the active computer.

  • How do I add an airport extreme to a cable modem with only one ethernet port, while keeping that port connected to my Mac?

    I have a mac pro connected by ethernet to a cable modem via ethernet.    There is only one ethernet port on the modem.   
    I want to keep the Mac connected via ethernet for speed.    Is there a way that I can add an airport extreme to this set up - for my ipad and roku, and for guests to use - or do I need to buy a router to put between the modem and the mac?
    If I need a router, what kind?
    Thanks.

    The modem connects to the WAN "O" port on an AirPort Extreme router.
    The Mac Pro connects to one of the three LAN <-> ports on the AirPort Extreme router.
    Or if you do not need the ability to connect a hard drive to the USB port on the router, you can save a bit by using an AirPort Express.
    The modem connects to the WAN "O" port, the Mac Pro connects to the LAN <-> port
    Either the AirPort Extreme router or AirPort Express router will allow up to 50 wireless device to connect.
    There are many other wireless modems offered by other manufacturers as well.

  • Only one hdmi connector

    I have a dvd player and dvr cable box. My tv has only one hdmi connection. How do I connect my Apple tv to television?

    You could:
    1 - swap HDMi cables around when you want to watch different sources - cheap but hassle
    2 - get an HDMI switch
    3 - get an AV amp
    4 - maybe connect the DVD player or DVR using a different connection and use HDMI for AppleTV?

  • Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

    I have a Mid 2011 Macbook Air.
    Upgraded to Yosemite last week.
    Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
    I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
    After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
    If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
    I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
    I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
    I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
    I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
    I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
    Thanks,
    John

    Hi!
    I have exactly the same problem, and I can't find any solution.
    I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
    I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
    Any suggestion is greatly appreciated!

  • Two jack headset, but only one audio port

    My son has an HP Mini 110-3100 Notebook PC, which contains only one audio port.  He also has a headset with two jacks:  one for the microphone and one for the headphones.  Is there a way that he can use this headset such that both the microphone AND headphones work properly?  Please advise as he is home-schooled and is taking courses through a virtual (online) school as part of his curriculum, which includes live lessons conducted through the network...this is where the headset becomes vital.
    Thanks.
    John J.Bottiger

    Hi,
    My suggestion is to use the output for the headphones jack and use internal microphone for.
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I bought an Apple TV but my HDTV has only one HDMI outlet.  What do I need to operate the Apple TV and my Uverse wireless network. I bought a four outlet hub at Best Buy but I can't't figure it out. Do I need something else?

    I bought an apple TV but my TV has only oine HDMI outlet, so I have to unplug it when I want to watch regular TV. I bought a four plug hub at Bestbuy but can't get it to work.
    Is there something else I can use?

    hdmi spillers and switches are hit or miss some work some don't

  • Multiple Monitor Setup for HPE-180t w/ NVIDIA GeForce GT 220 (only one DVI port)

    I am wanting to connect mutliple montitors via DVI connection to my HPE-180t.  My graphics card is the NVIDIA GeForce GT 220 which has 3 ports (VGA, HDMI, DVI) and does support mutli monitor display.  What is the best way for me to connect multiple monitors to my desktop?  I would like for all of them to be connected via DVI. 
    Thank you so much,
    Angela
    ``````````````````````````````````````````
    old computer: HP Pavilion PU131AV / a1050y, Windows XP MCE, SP3 32bit, Nvidia GeForce 6600, Intel Pentium 4 CPU, 3.20 GHz, 2GB of RAM
    new computer: HPE-180t, Windows 7 Pro (64bit), Nvidia GeForce GT 220, Intel Core i7-930 quad-core CPU @ 2.80 GHz, 8GB of RAM

    What is the end goal you are attempting to acheive?  Are you looking to clone all three monitors or each monitor to be independent of the other (extended display)?
    This document covers how to configure the monitors in Windows 7.  I didn't see the GT 220 listed in the specifications, so I take it this is one purchased separately for the unit.  Most video cards require multiple monitors to be connected to a different port (to truly achieve a multiple monitor setup).  Since the card only has one DVI port, then the other ports (HDMI and VGA will need DVI adapters).  An example of an HDMI - DVI adapter can be found here. 
    The tricky part will be using the VGA - DVI adapter as DVI ports are typically DVI-D which makes it a pure digital signal.  VGA is analog, so the adapter will need to be special if the monitor is using a DVI-D port.  If it is a DVI-A or DVI-I port, then a standard VGA - DVI adapter will work.  If it is a DVI-D port, you will need an active VGA - DVI adapter.  If it is DVI-A/I, then a passive adapter will work.  This is an example of an Active VGA - DVI adapter.  For that adapter, a VGA cable will need to be connected to the VGA port with that end connected to the VGA side of the adapter and then being connected to the DVI port of the monitor. 
    Provided the video card supports 3 monitors, this would allow all monitors to have a DVI connection.  Keep in mind that the VGA port will still deliver an analog signal as opposed to the DVI and HDMI ports.  The card specifications do not really say how many monitors it supports, but it most likely does support three monitors. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HT1551 I HAVE AN OLD SAMSUNG FLAT SCREEN AND THERE IS NO HDMI PORT TO CONNECT MY APPLE TV, WHAT DO I DO?

    i do not have a HDMI port on my tv what do i need to hookup Apple TV?

    Welcome to the Apple Community.
    What types of signal does it support, is it widescreen and does it support 720p.

Maybe you are looking for

  • How can i associate the iPad with my account?

    Hi, i got a new ipad 2, first thing ive synchronized it with my iTunes, but i cant download new tv episodes from on the ipad 2. when i downloaded a new app on it ive receive an email saying that the app was downloaded on a computer or device that had

  • Premiere Titler - a Powerful Tool

    The Titler in Premiere is basically a sub-application, within Premiere. It is a little bit word processor, has some of the attributes of Photoshop and Illustrator, with a tiny bit of InDesign, built in, and is very useful. It’s a very powerful tool,

  • Content.css file in Web page composer

    Below are the styles I am using in a JSP file for Web page composer layout. Not  sure where to add the CSS file. Is it etc/wpceditor/css/runtime? How do I include it in my jsp? and Do I hve to restart portal after I upload the css file? table.wpc_3c_

  • How to manually configure and then use DHCP

    I'm having problems with internet connectivity. If I try to configure in Airport Utility, there are two choices - manual or use DHCP. If I allow AU to renew the DCHP lease, I end up with a bad IP address (one of those 169.... ones). If I configure ma

  • Crystal Reports Java Viewer

    I need to be able to view web reports of a payroll aplication. The payroll vendor told me that I need to install a Crystal Reports with the java viewer component. I am not going to develop I just need to view web reports. Which Crystal Reports versio