Only one headphone works

please help me to figure out what can I do to restablish function of the 2 headphone
thank you

First make sure that your headphones are plugged all the way in.  Sometimes your case will prevent it from fully inserting (if you have any doubt, try removing your case).  Assuming that isn't the problem, check Settings>General>Assessibility, scroll down to the Hearing section and make sure the left <---> right slider is centered and not offset to one side.

Similar Messages

  • HT204266 Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i do?

    Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i have to do?

    You can try cleaning the headphone jack. However, I suspect that th headphone jack needs replacement.
    Apple will only exchange your iPod for a refurbished one for this price.
    Apple - Support - iPod - Repair pricing
    A third-party place like the following is less expensive. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Why does only one headphone work on my ipod. it is not my headphones.

    when i plug my headphones into my ipod only one will work, unless i pull it out a little bit. i just bought a 70 dollar pair of wireless headphones and only one will work. i know it is not the headphones it is definetly the ipod. any way to help?

    Call Apple.

  • Only one headphone works & warranty

    my ipod nano only plays music through one of the speakers of my headphones. Someone else in this forum had a similar problem and was advised to send the ipod back to apple.
    My Ipod was bought less than a year ago and therfor should still be under warranty. i dont have the reciept though because I bought the ipod on the internet from the apple refurbished store.
    does my warranty still work?
    (wanted to ask that before i get it repaired for a huge amount of money)

    Make use of what is bad.
    Try the headphones on another device and try another set of headphones with the iPod.
    i dont have the reciept though because I bought the ipod on the internet from the apple refurbished store.
    You received one via email and also with the iPod when you received it.
    Go here -> Apple - Support
    and look at the bottom left for *About Your Support Coverage*.
    Input your serial number to check the warranty status.

  • Only one headphone working?!

    Why is it that EXACTLY one year after the purchase of my iPod the head-phone jack seems to give in? I received my iPod last Christmas and upon looking at the receipt, am heartbroken to see that it was purchased on the 15th of December 2006. As the problem occurred on Sunday the 16th, I find it necessary to complain. Although Apple produce may look all sleek and flashy, the offer little in the support section. Customers are expected to fend for themselves on forums like these, without any intervention from a technical professional. As I love my music I am going to have to get it fixed, however, in Dublin, Apple offer little or nothing in services for reparations.
    Does anyone know how much it may cost to repair the headphone jack (which has never happened in any other electrical item of mine before) which only plays from one ear, and occasionally both if the jack was to be twiddled (however not for long). I've seen that it can be fixed by opening the iPod, but I fear of breaking it. I'm not computer/hardware-illiterate by any means, but I want to ensure my iPod remains intact.
    Reply ASAP please!
    And if anyone from Apple is reading this, sort this problem out. Ive seen that this particular provlem is a common occurrence a year after purchase.
    Dazz

    You can get them replaced free of charge within the warranty.
    You will find this link help full https://selfsolve.apple.com/GetWarranty.do
    just follow the instructions, but you may have to put some credit card details, this is incase you don't return the faulty part.

  • When I plug in headphones or use audio jack only one speaker works.

    I have an iphone 4g.  When I plug in headphones only one side works.  When I plug into my car audio jack...only one car speaker works. 

    There is only one speaker, the other side is the microphone.

  • I plug my headphones in my iphone and only one headphone plays music and its not the head phones because i tried it in my ipad could it be the AUX ? and does this come under 1 year warranty ?

    i plug my headphones in my iphone and only one headphone plays music and its not the head phones because i tried it in my ipad could it be the AUX ? and does this come under 1 year warranty ?

    yes i also tried other headphones in my iphone and same result and yes they was all the way in and by the way its an iphone 5 brand new

  • It seems I cannot use Sky Go even if I use Firefox. The only one that works is IE 11.

    I was using Google Chrome, but it seems they do not support Silverlight which Sky Go use. I was told that Firefox would work. It doesn't. The only one that works is Internet Explorer 11, which is very slooow. Why can't I use Firefox to view Sky Go?

    My Sky homepage. If I want to watch cricket say, it come up with ' sky go unavailable at this present moment'. If I log on to my IE 11, sky go works Ok. I have the Silverlight add-on or plug-in whatever you call it.
    Still no joy in Firefox.

  • I've placed two Edge oam files in to a dps doc and only one will work, can anyone help?

    Hi, I've created one animation and tested it in dps and it works fine. I've repeated this and my second animation is fine also, but when I have them in the same doc only one will work.
    Has anyone had this problem or know of any suggestions?
    I'm using Edge CC and Indesign CC with the latest viewer release on my iPad.
    Thanks

    Hi, yes I'm using the most up to date tools (v27). I've tried also setting the delays to various different increments, this doesn't make a difference.
    Although this is an old post I wonder if it is the same issue - http://forums.adobe.com/message/5615731#5615731
    Thanks

  • HT2995 Only one speaker works when playing music. Is this normal?

    Only one speaker works when playing music. Is this normal?

    This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
    Regards.

  • I'm not happy at all with my Ipad I only had it for a few monthes and I found a lot of things wrong with it like it wont charge only one earbud works when i watch videos or listen to music but both work when I'm facetiming

    I'm not happy at all with my Ipad I only had it for a few monthes and I found a lot of things wrong with it like it wont charge only one earbud works when i watch videos or listen to music but both work when I'm facetiming

    Contact Apple to take advantage of your standard 1 year warranty.

  • When I Plug My headphones into my iPhone 4g only one will work

    When I plug my headphones into my iPhone 4 only one of the headphones will work, how do i fix this?

    Could be the headphones... Do you have another set of headphones you can try...
    See Here for...
    TROUBLESHOOTING iPhone Hardware
    http://support.apple.com/kb/TS2802
    http://support.apple.com/kb/TS1630

  • Only one channel working - fixable?

    Recently my ipod starting playing only one channel through headphones or a speaker jack - eg I can hear only whatever is coming through the left side speaker. I've verified that the problem is with the ipod, not the headphones. However, if I put pressure from a specific angle on the headphone cord right above where it connects to the ipod, both L and R channels work. This goes away again when the pressure is released.
    Has this happened to anybody else? Is it a fixable problem?
    Thanks!

    You need to replace the headphone jack on the iPod.

  • Only one speaker working with Airport Express

    Hi,
    Hoping for some help. I just connected an Airport Express to my stereo but only one speaker (left) is working. I plugged in headphones to the jack in the AExpress as suggested in other postings and both left and right work there. I have checked and updated Airport Extreme base station and Airport Express firmware software.
    I have an older amp (connecting the RCA cables to the TAPE ports since there is no AUX) but both speakers work for everything but the AirTunes.
    I am hoping there is a fix since I would really like this to work.
    Thanks for any suggestions.
    -Jane
    Mac OS X (10.4.8)

    Thanks for your response and sorry for the delay in
    responding. I did take the first set of cables we got
    (Y-adapter 2-male to 1-mini) back because we thought
    that was the problem. However after I exchanged for a
    new cable we have the same problem. I am thinking
    that the chances are that we would get 2 sets of bad
    cables are pretty slim.
    In both cases only the red cable worked for both
    speakers but if we only plug in the black cable into
    either speaker channel in the amp you can faintly
    hear the music and some static.
    Arg.
    Mac OS X
    (10.4.6)
    Did you ever get the problem with airtunes just playing through the one speaker? I have the same problem...reckon it is a faulty input port on the express. Did you try an optical cable? It might work as it works differently.
    Gaz

  • 2 thunderbolt displays worked fine daisy chained, moved one to work in other room, now only one will work.  both work independantly or both plugged into my macbook pro.

    I have 2 thunderbolt displays and have had them daisy chained for months where I only would plug one into my macbook pro 15" retina and both displays have worked great.  The other day I moved one of them into the conference room, connected also a HDMI cord to a projector to do some work with staff on software design. 
    I brought my thunderbolt back into my office and plugged it back into the other thunderbolt dispay, then plugged the other display back into my macbook and started it up and now I can only get one to work daisy chained.  They both work great independantly or if both of them are plugged into my macbook pro, but not daisy chained any longer.
    Is there a setting I need to look at to maybe reset so that my macbook pro will use both thunderbolt displays daisy chained?
    Thanks for anyones advice and sharing any similar issues and how you fixed the issue.

    Hi there,
    The first thing that I would recomend is resetting the PRAM on your portable.
    OS X Mountain Lion: Reset your computer’s PRAM
    http://support.apple.com/kb/ph11243
    If the issues persist, then you may need to force the device to detect displays.
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/ht5369
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    - Griff W.

Maybe you are looking for

  • Wishlist for groups administration in LDAP server console

    I wonder why there is no basic support in administration of groups in the Directory Server console. What I and others are missing is: - search for users in large static groups - sort columns in group member display by clicking on column titles - sear

  • Moving Contacts from Curve 8350 to Torch 9800

    I recently upgraded my curve 8350 to a BB Torch 9800.  Prior to doing this I made a backup of all the contact files on the phone. When I connect my Torch to my computer I open the Blackberry Desktop Software to restore my .ipd file from the curve.  I

  • Integrating Hyperion interactive dashboard in ADF

    Hi i am currently doing a project, i need to create hyperion interactive dashboard with a login page. Is it possible to do that, cos i cant seem to find any tutorial about it. This is my intended page flow: login page(system will authenticate user) -

  • IWeb podcast artwork troubleshooting?

    Here is the link to a thread about the trouble I'm having getting my artwork to correctly appear on my podcast in the iTunes store. Any help is greatly appreciated! http://discussions.apple.com/thread.jspa?messageID=13317069#13317069

  • How to use exe4j on JBuilder 9's projects?

    i could use exe4j to make .exe file on everything that creates by IDE programs or a textPad except the JBuilder. if i run the exe file that exe4j created will shows a error message says "Cannot find the main class" or something like that, and i am no