Only one iphone speaker works. Is this normal?

The speaker grill next to headphone jack doesn't produce sound. Is this normal? I cover each side one a t a time.

The bottom of the iPhone has one speaker, one microphone.

Similar Messages

L505D-S5983 Only One Internal Speaker Works

I bought this L505D-S5983 laptop in November 2009. It has all factory default hardware... I haven't added anything; but for the past few months I have been having issues with the internal speakers. I have read several speaker issues for this laptop on this forum, but no one has a similar problem that I can see.
The problem seems to be that sometimes the left speaker doesn't work (or puts out very little sound) while the right speaker has always worked. It seems to happen fairly often - I will be in the middle or a game, or playing music and the left speaker will cut out... sometimes it comes back, but the majority of the time its usually quiet.
I have made sure my realtek audio drivers are up to date and tried adjusting the levels and such under control panel and the realtek audio manager, but nothing seems to fix the problem. Any ideas?
Solved!
Go to Solution.

I have the same problem on my a215. at first it seemed to stop when I used you tube then it was sporadic. seems to come back when itunes is updated. then it works for a while and goes out. only the original driver will kind of work otherwise no headphones. Im not sure that its worth getting a speaker replaced. I could just buy a new laptop. I havent been able to figure it out. i KNOW THIS IS A REALLY ANNOYING PROBLEM TO TRY TO PINPOINT.

The last time I recharged the battery from power outlet it took 18 hours. IPad is only one month old. Is this normal?

How long should it take to recharge iPad 2 battery from power outlet?

Presuming you're using the iPad power brick and not an ipod's or other 5W one, 8 hours give or take (i do it overnight so I honestly can't give an exact answwer. ANd it also depends on how low it was when you started.
Do you get a 'not charging' up by the battery meter?

Does anyone have the problem of only one ear plug working on the life case for iPhone?

I have a life case for my iPhone...when I add my earphones to it, only one ear phone works...?

What troubleshooting steps have you taken?
Try these:
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.

I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?

I just bought an iPhone 5c but siri doesn't work when I press the home button only raise to speak works! Siri is activated and everything any help?

Press and hold Home until it beeps.
Then let go and speak. Or contune to hold and speak and let go when finished speaking.

Only one audio canal works

Hello folks, I've had my iPhone 3G for over a year now, but now the first problem has occured. When have my headphones plugged in, there is only sound on the left of them. The same thing happens when I want to listen to music through the speakers. Only one of them work. How can I get back to stereo sound?

The iPhone includes a single external speaker. The opposite grill that appears the same is the microphone.
Do you have access to another set of earbuds to try to determine if the problem is with your earbuds or with the iPhone?

Why does only my right speaker work?

I have had an Iphone 4 & a 4S. With both phones, only the right speaker works. Can anyone tell me why?

That's because the left "speaker" is actually a microphone. The right one is a speaker. Kind of weird... but there's nothing wrong. It's so you can talk on the phone

Only one UPN suffix works with OAM plugin for RSA-integrated Authentication

Only one UPN suffix works with OAM plugin for RSA-integrated Authentication while others give "CredentialsRejected" error
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-
Has anyone seen this before and might know the answer? Any suggestions? Thanks!
I have setup an OAM authentication scheme that uses a custom plugin to use RSA ACE server - all pretty much exactly as it is outlined in the chapter called "Integrating the RSA SecurID Authentication Plug-in" in Oracle Access Manager Integration Guide. Here's the problem:
Everything works fine when I use a particular UPN suffix to login to the RSA Securid Login form that is presented, eg. [email protected], but if I create another user that uses a different UPN suffix as defined in Active Directory, (eg. [email protected]), the credentials are rejected. This happens before the secuirid.pl script even gets a chance to run. After hitting "POST" the user is present with the same login screen he was just at, as expected during an authentication failure.
More info:
- I have performed successful anonymous ldap queries for both users in Active Directory using LDP. Both users exist in the same domain and in the same OU. If I change the UPN (in AD and the RSA database) to something different from the "good" one, on either user, it fails. If I change the UPN to the "good one" on either user (in AD and the RSA database) it works.
- if I test users with either the "good" or the "bad" UPN via the RSA agent tester that sits on the OAM box, both of them show as authenticating successfully. However, it doesn't work for the "bad" UPN when I try to access via a web browser on a remote client (but does work with the "Good" UPN)
- I am not using SSL in any of this yet, it's all http://
- yes, I already got rid of the "-w" parameter in the first line of the perl script, as per the "login can fail if the Login Attribute Contains an "@" Character in Integration Guide Troubleshooting section
- here's an example of the settings in rsa securid authentication scheme:
action:/OracleAccessManager/securid-cgi/securid.pl
form:/OracleAccessManager/securid-forms-adforest/securid-std-login.html
creds:login password domain newpin newpin2
passthrough:yes
authn_securid fullformdir="C:\apache\Apache2\htdocs/OracleAccessManager/securid-forms-adforest/",machine="MyComputer.mydomain.com:80"
credential_mapping obMappingBase="%domain%",obMappingFilter="(&(objectclass=user)(userPrincipalName=%login%))"
Environment:
OAM 7.0.4.3
RSA Ace Server 5.2
Windows 2003 domain with multiple UPNs defined in Active Direcory Domains and Trusts
Error as seen in the oblog.log for the webgate on the server that holds the RSA login pages and perl script:
Message^A plugin for the authentication scheme SecurID Authentication has denied authentication for credentials ([email protected]
password=(omitted) domain=dc=ourdomain,dc=com newpin= newpin2= Resource=/OracleAccessManager/securid-cgi/securid.pl RequesterIP=10.250.1.2 Operation=POST).
ReqReq^POST /OracleAccessManager/securid-cgi/securid.pl HTTP/1.1 ReqProto^HTTP/1.1 ReqHost^www.MyComputer.mydomain.com. ReqStatLine^
ReqStatus^200 ReqRawUri^/OracleAccessManager/securid-cgi/securid.pl ReqUri^/OracleAccessManager/securid-cgi/securid.pl
ReqFilename^C:/apache/Apache2/htdocs/OracleAccessManager/securid-cgi/securid.pl ReqPath^ ReqArgs^
2009/07/13@15:19:49.665000 45688 46472 AUTHENTICATION ERROR 0x00001515
\Oblix\coreid\palantir\webgate\src\authentication_event_handler.cpp:1361 "Authentication failed" HTTPStatus^401
authenticationSchemeName^SecurID Authentication AuthenticationStatus^majorCode = 11[CredentialsRejected], minorCode = 47[AuthnPluginDenied],
StatusMsg = , GSN = 0, needInfo = NONE Creds^[email protected] password=(omitted) domain=dc=ourdomain,dc=com newpin= newpin2=
Resource=/OracleAccessManager/securid-cgi/securid.pl RequesterIP=10.250.1.2 Operation=POST
Only error seen in log produced by the RSA agent that sits on the Access server:
[20804] 12:27:08.915 File:ACNETSUB.C Line:326 # CheckServerAddress: server 0 detected from address 10.250.88.100
[20804] 12:27:08.915 File:udpmsg.c Line:968 # Entering decrypts_ok_legacy()
[20804] 12:27:08.915 File:udpmsg.c Line:999 # decrypts_ok_legacy: decrypt() wpcode1 failed; wpcode0 next ***********
[20804] 12:27:08.915 File:udpmsg.c Line:1089 # Leaving decrypts_ok_legacy(), result=1
[20804] 12:27:08.915 File:ACEXPORT.C Line:820 # Entering AceGetUserData()
[20804] 12:27:08.915 File:ACEXPORT.C Line:833 # Leaving AceGetUserData() return: ACE_SUCCESS
[20804] 12:27:08.915 File:ACEXPORT.C Line:579 # Entering AceGetAuthenticationStatus()
[20804] 12:27:08.915 File:ACEXPORT.C Line:592 # Leaving AceGetAuthenticationStatus() return: ACE_SUCCESS

What are the logs you see at the ACE server end? You can try passing an additional parameter debug="true" to the authn_securid plug-in - it should generate some more logs at the access server - I think in apps\common\bin.
Also does "ReqHost^www.MyComputer.mydomain.com" look right in the logs?
-Vinod

My Ipod is 5-6 years old. Suddenly, I'm getting audio through only one ear bud. Is this a common occurrence? And does this just mean I need to replace them?

My Ipod touch is 5-6 years old. Suddenly, I'm receiving audio through only one ear bud. Is this a common occurrence? And does this just mean I need to replace them?

It's fairly common for headphones after extensive use (5+ years). If you have another set of headphones (any type with same connector), try it with the iPod to determine if the fault is on the headphones or on the iPod. Or you can try the same headphones with another device, to see if they are working fine or you get the same audio problem.

ITunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

I have the ipad 1, ios 5.1 is its max, and garage band requires ios 7.0, how do i buy garage band version 1.3, its the only one that will work, apple is so hard to get a hold of on these kind of things.

I have the ipad 1, Ios 5.1 is its max, and garage band requires ios 7.0, how do i buy garage band version 1.3, its the only one that will work, apple is so hard to get a hold of on these kind of things.

Unfortunately the answer is still no.

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad?

I am new to developing apps on iOS and on the OS X. Can I only download to only one iphone or mac to test apps, or can i download to multiple iPhone and Macs? Thanks, J

Can I only download iOS 6 and Mountain Lion to only one iphone or mac to test apps, or can i download to multiple iPhone and Macs? Thanks,

Pls. use the confidential iOS 6 beta & ML forums, thanks.

HT201269 me and my brother both are having iphone 4s we just want to exchange phones with each other also the whole data from one iphone to other is this possible or how can i do that with only one itunes?

just want to move data between two iphones using one itunes.

Make sure your computer iTunes is up to date. (iTunes 11.1.1)
Now, do it one iPhone at a time; When you connect and select iPhone in computer iTunes sidebar (iTunes > View > Show Sidebar), what iPhone name do you see?
iTunes is smart enough to tell the differences if each has a unique name.
Point One checked.
Right click on iPhone name in Sidebar and choose Backup.
Do the same for the second iPhone.
Make a copy of the backups in computer to another location (Just incase something gone wrong)
Where iTunes backups are stored on computer http://support.apple.com/kb/HT4946
Point 2 checked.
Point 3 & 4
http://support.apple.com/kb/ht1766

Only ONE contact not working for Messages?

Hi All,
Hope you can help me with this one... and please, I'm hoping for input from as many who have an idea, so please don't feel like there's no need to jump in on this even if there's someone else here posting with a solution. These threads are most useful with more than one insight. I'll try them all.
So, here it goes...
We've got an iPhone 4s on one end... and probably (but I'm not certain) an iPhone 4s at the other (could be an iPhone 4).
On both ends, both users can send texts and SMS/MMS messages to everyone else in their respective phone books. They can also send each other emails successfully. But they cannot -- on either end -- send each other Messages (SMS/MMS or regular Messages).
On both ends, the other user comes up as a red contact and the messages bounce back "not delivered."
And we can't, for the life of us, figure out why.
ALSO, in case it means anything, only this ONE contact comes up as red when typed into Messages on the companion Macbook. So it's not just the iPhone on our end that's an issue. (NOTE: I'm only at one end of the chain here, helping my mother-in-law with her phone. Her daughter is at the other, several States away. So we can't see what she's got going on with her phone.).
Here's what we've tried so far, with no luck (so jump past any recommendations that include the following, please):
1) On both ends, we have deleted and recreated Contact cards.
2) I logged out of iCloud, allowing it to delete the local contact cards etc. and logged back in.
3) I logged out of the Messages account on this end and then logged back in.
4) On both ends, we've checked to make sure neither contact is blocked (well, on this end anyway... on that end, they say they have but we're not sure if they're doing it right).
Note: I have NOT reset the Network Settings... but only because all other contacts but this one are working.
Any ideas, guys?
Thanks in advance.

Thanks... and then for the suggestion to sign out and sign back in. I've already done that though (see #3 in my original post... that's what it meant). And I've already sent a link to the person with the other phone, suggesting she do that too. Also thanks for the point on the MacBook not being able to send SMS. Good point.
That said, yep... I'm sure I'm not trying to send an SMS. Even so, that would at least go in green... right? But we cannot send either SMS or iMessage from this end. When I open a new Message... and type in the contact name... it goes red. Just red. As though it's already unreachable. Even though it's the right number and the right email address. I would at least expect that it would, if she weren't registered to iMessage, be deliverable as an SMS (green)... but no.
Here's the process, if it helps:
I open a new message and type in the address -- it goes red (already a sign of trouble).
Then I try to type in a message anyway. It goes green.
Then I hit send and get back a "Not Delivered" error.
Same on her end.
Now, here's something interesting.... I'm typing to you now on a different machine, running under a different administrator (me) and I've just tried to send a message to the same two recipients. One, my mother-in-law's, works just fine. The other, my sister-in-law's ALSO goes red on my machine.
Hmm.
Question: You say "I would suggest you both go to Settings > Messages > Send & Receive, sign out and sign back in. Also make sure that the addresses that you are trying to reach each other at are listed there."
By this, I'm assuming you only mean that each person's sending and reachable addresses are listed in the settings, right?
I guess it's possible she never set that up (on the other end) but she says she can text fine with everyone except her mom.
On the other hand, why would her email address go red in my new Message window too?

Only one iphone speaker works. Is this normal?

Similar Messages

Maybe you are looking for