Only one NIC at a time?

I'm pretty new to OS X Server administration and was wondering if someone could point me towards some information about getting both NIC's to answer. I've got both configured and only the first one in the network "Service Order" is the only one responding.
The machine is setup at our co-location. my goal is to have one NIC accessible to the outside world and the other setup on our private network and used for remote management.

Ah, the "fun" of dealing with IP and with [routed|http://developer.apple.com/documentation/Darwin/Reference/ManPages/man8 /routed.8.html] and with default routes. IP typically tosses packets directly out to the local subnet for the available interfaces (NICs), or out to the default route.
Start with some of the existing discussion threads such as [threadID=674280|http://discussions.apple.com/thread.jspa?threadID=674280] or [threadID=1407475|http://discussions.apple.com/thread.jspa?threadID=1407475], or with this [alternate routing help|http://www.sustworks.com/site/prodipnrxhelp/html/AlternateRouteHelp.html], or start digging into configuring IEEE 802.3ad link aggregation on your Mac OS X Server.
Depending on your goals, static routes might suffice -- though I might well look to configure two distinct IP subnets here, the private subnet for your own management traffic and related stuff, and the "public" or "red" subnet.

Similar Messages

  • 1. Does not start automatically  2. Only ONE user at a time

    When I plug the IPOD it should start iTunes automatically (I have the box checked) but it does not. Never has done that. I have the latest 7.1 version.
    Another pain in the rear is that only one user at a time can run iTunes. That stinks. If another user has it open you MUST log off, stop them, log on. They ought to make this work for all users as other windows pro rams do. If it is doing NOTHING with the library then I ought to be able to use it.

    That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
    I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer.

  • When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event.  Now it shows only one photo at a time.  How do I get it back? Can you help?

    On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
    Regards
    TD

  • TS3276 I can have only one recipient at a time on e-mails I am sending.

    I can have only one recipient at a time on e-mails I am sending.

    Any ideas on how to fix it?

  • Selecting only one row at a time

    Hi experts,
    i have following doubt regarding selecting rows from a db:
    Is there any way of selecting only one row AT A TIME from a dabase just to collect the data in rows instead of in a unique document containing all the rows?
    I would like you to ellaborate on this as i need to send only one row to the IE, and then other row, and so on... without throwing any error!
    I have seen that there are SELECT SINGLE and SELECT UP TO 1 ROW, but these two methods are only useful when retrieving only one row, and that does not match my requirements. I need to process all the rows but one by one..
    I know that we can use the receiver jdbc adapter as if it was a sender by means of its specific datatype, but how to do it row by row??
    Hope i had explained well..
    Thanks in advance and best regards,
    David

    Hi kiran,
    Yes, my table has 5 not null fields but i am selecting and updating fixes values so i think that I will definetely go for the next solution:
    SELECT * FROM t1 WHERE status='0' and ROWNUM<2;
    UPDATE t1 SET status='1' WHERE status='0' and ROWNUM<2;
    My only concern is if the update will take the same row that the select.... BTW, I think it will
    ..What do you guys think?
    I ve been trying to operate with your proposed queries but i received some errors. Your queries are very interesting but i think that with the above ones i meet my requirements as the status field will be 0 for not processed rows and 1 for precessed ones (and the update will look for the row that meets the same 'where' clause than the select, and then, and only then, it will set status='1').
    The only thing i have to care about is what i questioned before.
    Thanks a lot and best regards,
    David

  • Creating iphoto book and can't seem to view/ work on only one page at a time.

    I am creating an iPhoto book and can't seem to view/work on only one page at a time.  The Navigator, that allows you to focus on a part of the page is actually 1 1/2 pages in size so 1 1/2 pages are in view when trying to work on one page.  What am I doing wrong or how can I fix this.  It is very distracting viewing half of a previous page when trying to create a new page and write a story to go with the related pictures.

    My Navigator seems to be to large.  It covers 1 1/2 pages while in the training information it shows as the size of one page.  Is there a way to adjust the size of the Navigator?
    You can hover the mouse over the left border of the Navigator - then the cursor will turn into a resize cursor and you can drag the border and make the Navigator panel smaller by enlarging the source list.
    Or drag the lower right corner of the iPhoto window and shrink the appliaction window. This will only make the navigator smaller - the source list and information panel will stay the same size.
    Regards
    Léonie

  • SCAN LISTENER runs from only one node at a time from /etc/hosts !

    Dear all ,
    Recently I have to configure RAC in oracle 11g(r2) in AIX 6.1 . Since in this moment it is not possible to configure DNS, so I dont use SCAN ip into the DNS/GNS, I just add the SCAN ip into the host file like :
    cat /etc/hosts
    SCAN 172.17.0.22
    Got the info from : http://www.freeoraclehelp.com/2011/12/scan-setup-for-oracle-11g-release211gr2.html#ORACLE11GR2RACINS
    After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :
    srvctl status scan_listener
    SCAN listener LISTENER_SCAN1 is enabled
    SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
    now when I relocate it from node 2 using
    "srvctl relocate scan -i 1-n DCDBSVR2" , then the output shows :
    srvctl status scan_listener
    SCAN listener LISTENER_SCAN1 is enabled
    SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2
    Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
    srvctl relocate scan -i 2 -n DCDBSVR2
    resource ora.scan2.vip does not exists
    Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?
    Here is my listener file (which is in the GRID home location) configuration :
    Listener File OF NODE1 AND NODE 2:
    ==================================
    ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON
    ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON
    LISTENER_SCAN1 =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)
    ADR_BASE_LISTENER_SCAN1 = /U01/APP/ORACLE
    2)
    Another issue , when I give the command : " ifconfig -a " , then it shows the SCAN ip either node1 or node2 . suppose if the SCAN ip is in the node1 , and then if I run the "relocate" command from node2 , the ip goes to the Node 2 . is it a correct situation ? advice plz ... ...
    thx in advance .. ...
    Edited by: shipon_97 on Jan 10, 2012 7:22 AM
    Edited by: shipon_97 on Jan 10, 2012 7:31 AM

    After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :If I am not wrong and after looking at the document you sent, you will be able to use only once scan in case you use /etc/host file and this will be up on only one node where you added this scan entry in /etc/hosts file.
    Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?Probably you can't in your case, you might run only one i think and on one node only
    srvctl status scan_listener
    SCAN listener LISTENER_SCAN1 is enabled
    SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
    now when I relocate it from node 2 using
    "srvctl relocate scan -i 1 -n DCDBSVR2" , then the output shows :
    srvctl status scan_listener
    SCAN listener LISTENER_SCAN1 is enabled
    SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2You moved scan listener from node 1 to node 2, OK
    Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
    srvctl relocate scan -i 2 -n DCDBSVR2
    resource ora.scan2.vip does not exists
    --------------------------------------------------------------------------------Since you have only one scan, you can't relocate "2". So ise "1" instead here also
    FYI
    http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
    Salman

  • Multiple Qaawses but use only one Qaaws at a time

    Hi,
    In Dashboard , I have two Qaawses (Qaaws1 and Qaaws2). When I am trying to generate SWF file both the qaawses are running. My requirement is, in Excel file I will set a flag value in one cell (0/1).
    If the cell value is '0' then the Dashboard should use only Qaaws1.
    If the cell value is '1' then the Dashboard should use only Qaaws2.
    In essence my requirement is, even though multiple Qaawses are present in Dashboard, the Dashboard should be able to use only one Qaaws at a time based on my requirement (i.e., based on flag bit value 0/1).
    Can any one suggest,  solution for this?
    Thanks in advance.
    Regards,
    M. N. Kishore Babu.

    Hi David,
    Thank you very much for the response and sorry for the delay.
    Our actual scenario is a s follows:
    We pass customer id and shipper Group Id as an input parameters to the flash variables from front end (through Java program). And these two values will written in Excel cells (let say Customer id in A1, and Shipper Group Id in B1)
    Now there are two Qaawses, Qaaws1 and Qaaws2 in the xlf in addition to flash variables.
    Qaaws 1 query is as follows :
    select * from shp_details where customer id = A1
    Qaaws 2 query is as follows :
    select * from shp_details where customer id = A1 and ShipperGroup_id = B1
    On front end we have two drop downs, Dropdown1  is for customer id and Dropdown2 is for Shipper Group Id.
    When we select an item in Dropdown1, from front end we pass only Customer Id and when we select an item in Dropdown2, we pass both Customer Id and Shipper Group Id.
    Our requirement is,
    When we select Dropdown1 (we are passing only customer id), we expect only Qaaws1 to be executed.
    When we select Dropdown2 (we are passing  both customer id and shipper Group Id), we expect only Qaaws2 to be executed.
    Please let me know, if I need to provide any further clarification.
    Thanks & Regards,
    M. N. Kishore Babu.

  • Concurrent program to be submitted y only one user at a time

    Hi
    I have an issue with one of my reports. The report is using temporary tables, those will under go insertion and deletion while the report is running. So, to make sure that two or more concurrent requests submitted for same report, will not conflict, I want to make my concurrent request to be submitted by only one user at a time.
    How can I do that?
    Any help is appreciated.
    Thanks
    BalaKrishna

    The "run alone" box should not be checked. This indicates that this program can only run when no others are running. Pl see MOS Doc 1078462.6 (Custom SQL Concurrent Program Returns NO MANAGER Error). This option should typically not be used.
    To be able to achieve what you need, set the incompatibility (as you have done) and then bounce the concurrent managers for the setting to take effect. Pl see these MOS Docs
    436186.1 - Cannot Make Concurrent Programs Incompatible With Itself
    142944.1 - How to Make a Concurrent Program Incompatible with Itself
    HTH
    Srini

  • How to select only one record at a time in ALV

    Hi all,
    I have to use ALV report.  Each record on the report output should have a button (or radio button) which will allow the record to be selected.  My requirement is to select only one record at a time.
    please guide me how to proceed further.
    regards
    manish

    hi
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/sampleCheckBoxProgram
    Regards
    Pavan

  • Return only one record at a time

    I am new to crystal reports so any help would be appreciated.  I have a .net app that is a order processing system.  When the user is in a record, they want to be able to click on a button an open a crystal report showing only that orders details.  I created a crystal report that has the following fields:
    Order ID, Product ID, Unit Price, Sell Price, Hours.
    The Order ID is the primary key in the database.  The report runs fine when clicking the report button in the app, but returns the details for every order in the database.  We just need the details of the order that the user is processing.  How do I setup the report to only show that order's details?  I am using VB 2005 and Crystal v9.
    Edited by: sking on Mar 6, 2009 1:12 AM

    Brian,
    Thank you for all your help.  I have been able to setup the report to return only one record at a time. In my app, when I click the report button the PDF opens perfectly with only one record.  However, when I go to another record and open the PDF it returns the information from the record id that was set as the default parameter value (crReportDocument.SetParameterValue("Orders", 67).  How do I get it to return the report for a different record?  Here is the code I'm using.  I think I'm really close with your suggestions but I'm just missing one step. 
    #Region "CrystalReport"
         ''' <summary>
         '''Override the CrystalReportButton_Click and call DisplayReportAsPDF_CrystalReportButton function
         ''' </summary>
         Public Sub CrystalReportButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
          Dim crReportDocument As CrystalDecisions.CrystalReports.Engine.ReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument
          Dim fileName As String = "test.rpt"
          Try
              If fileName.Substring(1).StartsWith(":\") Then
              crReportDocument.Load(fileName)
          Else
              crReportDocument.Load(Me.Page.MapPath(fileName))
          End If
          Catch ex As Exception
              Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
              errMsg += " Please make sure the dlls for Crystal Report are compatible with the Crystal Report file."
              BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
          End Try
          Try
    Dim paramValue As CrystalDecisions.Shared.ParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue()
               paramValue.Value = "67"
               crReportDocument.SetParameterValue("Orders", 67)
    DisplayReportAsPDF_CrystalReportButton(crReportDocument)
          Catch ex As Exception
              Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
              errMsg += " If this is a deployment machine, make sure network service has permissions to read or write to the windows\temp folder."
              BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
          End Try

  • I formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options,  1- erase and sync, 2- transfer purchases. what to do?

    i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options,  1- erase and sync, 2- transfer purchases. what to do?

    Follow these instructions:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • How to configure my MDB serve only one message at a time?

    Hi All,
    I have requirement where I need to develope a MDB iin weblogic. This MDB has to serve only one message at a time. If the send second message is sent while the first one is running the second message has to sit in queue and start processing once the first message is finished.
    Is there any way to configure via annotations or in weblogic server settings ?
    Any help would be really appreciated...
    Thank you,
    K.

    Here is my client code to send the message
    Connection connection = null;
    javax.jms.Session session = null;
    MessageProducer producer = null;
    try
    connection = lpConnectionFactory.createConnection();
    session = connection.createSession(false, javax.jms.Session.AUTO_ACKNOWLEDGE);
    // Create a MessageProducer from the Session to the Validation Queue
    producer = session.createProducer(myQueue);
    ((WLMessageProducer)producer).setUnitOfOrder();
    // Create a message
    ObjectMessage message = session.createObjectMessage();
    message.setObject(params);
    message.setStringProperty(MyServiceConstants.OPERATION, operation);
    // Send the message to the queue
    producer.send(message);
    finally
    if (producer != null)
    producer.close();
    if (session != null)
    session.close();
    if (connection != null)
    connection.close();
    Following is the weblogic-ejb-jar.xml
    <?xml version="1.0"?>
    <!DOCTYPE weblogic-ejb-jar PUBLIC
    "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN"
    "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
    <weblogic-ejb-jar>
    <weblogic-enterprise-bean>
    <ejb-name>TestMDB</ejb-name>
    <message-driven-descriptor>
         <pool>
              <max-beans-in-free-pool>1</max-beans-in-free-pool>
              <initial-beans-in-free-pool>1</initial-beans-in-free-pool>
         </pool>
    </message-driven-descriptor>
    </weblogic-enterprise-bean>
    </weblogic-ejb-jar>

  • How to configure my JMS QUEUE serve only one message at a time?

    Hi All,
    I have requirement where I need to develope a JMS QUEUE in weblogic. This MDB has to serve only one message at a time. Is there any way to configure via annotations or in weblogic server settings ?
    Any help would be really appreciated...
    Thank you,
    K.

    I'm not aware of any way to configure the max pool size via annotations, you might try posting to the EJB newsgroup (please post back the answer). Of course you can set the size via an EJB descriptor, as per the MDB chapter of the Performance and Tuning guide in the edocs.
    By the way, if you have ordered message processing requirements, I highly recommend taking a look at the WebLogic JMS "Unit-of-Order" (UOO) feature as per the UOO chapter of the JMS programmer's guide. For a variety of reasons, the UOO features is often, by far, the best option for handling such requirements. If this feature applies to your use case, then there would be no need to force single threaded message processing in some sort of manual fashion (the feature enforces this for you).
    Tom

  • Is there a way have a file only accessable by only one user at a time

    Here's the question...
    I want to set up a file so that it can only be accessed by only one person at a time - is there any way to do this?

    Turn off fast user switching and autologin, making all users log off before other users can use the machine.

Maybe you are looking for