Only one of three computers can connect to Internet via Airport

My partner made a change in airport settings when a problem with the router came up and I only partially have it fixed. We have three different computers that have all been accessing the Internet via an 1st generation Airport extreme. The Airport is connected via ethernet to the cable router. One computer, the one that was used to set up the Airport originally, can connect to the Internet just fine. The other two laptops can "see" the Airport network, but cannot get an Internet connection. Do I need to reset the Airport and start over?
Thanks for your thoughts.

Your partner likely changed the AirPort to Bridge Mode based on the information in your post.
Check the following setting on the AirPort Extreme using AirPort Utility - Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connection Sharing = Share a public IP address
Update to save settings and allow 25-30 seconds for the AirPort to restart.
Then restart the entire network again.

Similar Messages

Can't connect to Internet via Airport but CAN via Ethernet

Yeah so I have tried TWO different of my AX's and can not connect to the internet via EITHER even though Network Status says "you are connected to the internet via Airport". But, if I hook the ethernet cable directly to the computer from the modem it connects to the internet fine. What am I missing. Oh yeah, and on one of the AX's the "music" tab does not appear next to the "WDS" tab thus not allowing AirTunes on that AX, any ideas on that too? PLEASE HELP!!

CONNECTED!! After resetting the modem, llike you suggested, I am able to get the wireless network back up and running, BUT...I am still having problems with one base station not showing the "music" tab and thus not letting me stream music to it. When I hit "configure" the tab shows for a quick second then disappears. Any idea?

Network prefs: "connected to internet via airport"... but can't go online??

I've got steady green lights on my airport express and modem/router; and in Network Preferences it says that I am connected to the internet via Airport (green light here too). BUT, I can't get online with any of my browsers or my mail client. What's going on here? Help appreciated.
Thanks
eMac 1GHz, iBook 14" 1.33GHz Mac OS X (10.4.8)

If you have a Modem Router combined and an Airport Express
The Express must be set up to NOT DISTRIBUTE IP's.
You do not mention what brand Modem or Router or Modem /Router combined. Your network confiquration can very a little depending on what you are using.
If you are using all Apple Airport products the confiquration is pretty straight forward.
If you are using 3rd party products then the set up can be a little different.
From what you say in your post you are using 2 routers, my quess is the Express is set up to distribute IP's and if your other router is set up this way then thats your problem.
Don

24" imac 2.4 says connected to internet via airport--but does not

I just got a new 2.4ghz 24" aluminum imac. There are three other macs in my house, all of which connect to our wireless network and are able to browse the internet. This new computer can connect to the network, yet it always has one of two problems: either it says it is connected to the network, but can't access the internet, or it says it is connected to the internet via airport, but when you open your web browser, no such luck. Many times when I open the network preference panel, there is no router number assigned. Sometimes there is. I can connect to other networks in the neighborhood that don't require a password just fine (how I'm writing this). Why can this new machine not connect, when all three of the other macs in the house have no problem?
anyone, please help. this is frustrating.
thanks,
keegan

OK but, like you, my other machines (PowerPC iMac and Power Book) did seem to work OK while the new iMac was playing-up. It was only when I noticed that the Old iMac had not downloaded some podcasts that I started to look at the router. I now remember having a similar problem a few years ago - frequent failure to automatically log-in to the router, occasional failure of manual log-ins and slow/unreliable connection once logged-in. A new router fixed the problem. It's a real pain but there you are. Must remember to keep receipt of current router and kick-up a fuss if it fails within the guarantee period.
Sorry if this doesn't help but I thought it worthwhile posting my experience over the last 2 days.
Have you tried connecting to your router by ethernet?
I'll let you know if the problem returns but all is sweetness and light at present.

Trouble connecting to internet via airport

i can't connect to the internet via airport. Does anyone know what the problem may be?

There are several items that may be behind this issue.
So troubleshooting them by trial and error is most likely
a way to attempt to resolve the cause, especially with
an older OS X and hardware, while trying to connect to
a newer base station and different newer frequency...
•Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
The above covers several areas of settings and ideas.
If the computer has been online, and now does not work
wirelessly, that may be a matter of an accidental change
in settings; or something turned off that used to be on.
A general overview, w/ examples of settings similar to the above, for 10.3.9/10.4.11 appears here: http://www.tr.txstate.edu/get-connected/computerservices/wireless/encrypted/maco sx-wpa2.html
Is you computer running OS X 10.3.9 Panther? If so,
your built-in AirPort card may be an 802.11b version
and the security protocol would not work with a newer
or modern wi-fi base station (WEP, WPA) unless those
settings were changed. You can turn off security if the
computer is too old to be able to connect with the old
settings for that protocol. Also, a later wireless base
station may not see an old wi-fi card using 802.11/b.
So it is a matter of knowing what you have on either side
of the connection issue; the base station and the wi-fi
card have to use the same frequency and security. Or
there are work-arounds to attempt to correct this matter.
Hopefully you can connect and use the wi-fi internet.
Good luck & happy computing!

NH1005, only one device at a time connects to internet

I just switched my net to suddenlink cable (4mb/down, 512k/up) from a 756k clearwire broadband connection. I'm using the same network setup as before, all my machines set to auto-acquire IP and DNS addresses. Now though, I can only get on the internet with one device at a time, the other machines cannot find the DHCP server. I thought my NH1005 router had gone nuts, but that wasnt the case, went and got a new one at walmart and it does the same crap.. tried as well to access my router via 192.168.1.1, and even went in and tried using my gateway address to access my router.. both failed. I'm at a loss for what to do, especially seeing as how my old ISP just WORKED when i plugged it all in. Yes, i've reset my modem and all that stuff, many times, just at the end of my rope here. BTW my machines are a winXP laptop, and 2 playstation2's running Final Fantasy XI online.

hi..it seems that you have got a cable modem..and as NH1005 is a hub , only one computer can get connected at a time....
multiple computers can go online only if the hub is connected to a router...

Can't connect to Internet via Airport

I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
Anyone can help?

By power downs do you mean Sleep?
One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

Can't connect to internet via AirPort Extreme with Laptop running Vista

I've seen a lot of posts on this topic, and maybe I'm just out of luck, but anyway...
My PC running XP can connect to the internet through the AirPort Extreme, but laptop will not. I load the AirPort Utility on the laptop. Should I be able to see the base when I run the Utility? It does not see it. I can see the wireless network with excellent strength, but all I can do.
If I can't get this to work, I'm going to just return it and to back to the wireless router. I was enticed by the ability to connect the printer and external hard drive to the base. I would like to get rid of the PC and just use my laptop for everything.

Looking over your original post again, I think I might have misunderstood you the first time. If I understand you correctly, your Vista laptop can see the wireless network and connect to it (so you have access to the Internet), but you cannot see the Airport Extreme Base Station when using Airport Utility.
If your Internet connectivity is not an issue and it's just that you can't see the base station in Airport Utility to configure it, try using an ethernet cable to connect your Vista laptop to one of the LAN ports and see if the base station shows up in Airport Utility then.

Can't connect to internet via AirPort, but am getting full signal strength.

I can connect to the network, but can't connect to any website on the internet. My laptop PC is able to connect to internet & network wirelessly..... but it's just my MacBook that can't.
Thanks & happy thanksgiving.

what ip address to you have in your laptop?
is it set to DHCP or did you manually enter in a ip address in your network preferences?

Can't connect to internet via airport expres !

Hello.
I recently just made a wireless network in my home using airport express.
I have configured the internet on my macbook. The internet is fine, perfect!
But on my windows vista, it sees and connects to the express. But theres no internet.
Please help me fix this problem so i can use the internet at the same time both on my macbook and my vista.

Hey,
No i havent find a solution sorry.
I have been looking everywhere .
But on my other post
http://discussions.apple.com/thread.jspa?threadID=1916488&tstart=0
There some helpful things there, try those but it didn't work for me.

Both iMac and powerbook can't connect to internet via Airport.

I have an iMac that is directly wired to an airport base station and a G4 powerbook that connects via a card. Neither can connect to the internet. The iMac is set up as follows:
Cable modem > ethernet cable to WAN port on AEBS > ethernet cable from AEBS to iMac.
The powerbook detects the base station and created its own network as soon as it did, yet still nothing. The first and third lights on the AEBS flash as to show activity and I have unplugged the modem to reset it multiple times.
I am completely confused as to what is going on. Can anyone please help?

If it helps any, I'm in the same boat. I've had an AEBS that has worked well until yesterday. Now, my Powerbook can't connect to the internet via wireless or ethernet (connected directly to the AEBS). My POwerbook CAN talk to my networked HD. To make things worse, my two Tivos (connected to the network via an Airport Express & WDS) CAN connect to the internet.
I'm totally confused. Since I can't connect to the internet when directly plugged into the AEBS, but can connect when I plug directly into the cable modem, I think I'm going to just buy a new AEBS...

Connect to internet via airport extreme via ethernet cable and no airport c

I just bought a MacBook with Airport Extreme, got it set up today and it works great, got online, etc. However, I have an iMac with no airport card. I can't figure out how to get both computers hooked up on the internet at the same time. The MacBook works only when the ethernet cable in in the LAN slot on the Extreme but won't work through the WAN slot. I have tried hooking up both ethernet cables into the Extreme, just the iMac, and nothing works. I don't need to connect wirelessly through the iMac so I don't want to buy an Airport card if I don't need one. I just don't want to plug and unplug the ethernet cable everytime I want to use the MacBook or the iMac. My modem from Verizon only has one ethernet slot. Any ideas?

I just bought a MacBook with Airport Extreme, got it
set up today and it works great, got online, etc.
However, I have an iMac with no airport card. I
can't figure out how to get both computers hooked up
on the internet at the same time. The MacBook works
only when the ethernet cable in in the LAN slot on
the Extreme but won't work through the WAN slot. I
have tried hooking up both ethernet cables into the
Extreme, just the iMac, and nothing works. I don't
need to connect wirelessly through the iMac so I
don't want to buy an Airport card if I don't need
one. I just don't want to plug and unplug the
ethernet cable everytime I want to use the MacBook
or the iMac. My modem from Verizon only has one
ethernet slot. Any ideas?
You mean Airport Extreme Base station?
Here's what you need to do:
1. Disconnect your Verizon Modem & Airport Extreme
2. Connect the ethernet cable from the Verizon modem to the WAN of the AE
3. Connect another ethernet cable from the LAN port of the AE to your iMac
4. Turn on Verizon Modem
5. Once all lights on the modem have turned on, turn on the Airport Extreme
6. On your iMac click on Applications --> Utilities --> Airport Admin Utility
7. Setup a Wireless network using this or the Airport Setup Assistant, located in the same Utility folder.
8. After you have created the wireless network, connect to it on your macbook
If for some strange reason you still can't figure it out, refer to the product manual or check:
http://docs.info.apple.com/article.html?artnum=106858

4 Macs, 2 will connect to Internet via Airport, 2 won't

I have Airport Extreme with four computers linked wirelessly. All "see" the Airport and can share files with each other, but only two (the Apple PC's) connect to the Internet while the Intel Mac's don't. I have checked apple setup, network, everything and can't figure this out. When I run network diagnostics the results claim the airport express doesn't have a static IP. It's no problem with the Mac PC's...
I don't have these problems at home with Airport EXPRESS.

I have a similar situation but unfortunately no resolution.
Setup:
Comcast modem connected to Airport Extreme various Macs connected through Airport.
Black MacBook - 10.4.8 connects fine, Internet, Mail, ..no problem.
iBook G3 - 10.4.8 same, works fine.
17" G5 iMac - 10.4.7 gets full Airport signal and DHCP IP, but will not connect. Sometimes it will not even get an IP until I reset the Airport.
iBook G4 - 10.3.9 same problem as iMac.
I tried deleting prefs, pram reset, and a number of other things. I wonder now if maybe one of the 10.4.8 computers updated the Airport so that it will no longer work with other earlier systems. I will try to update the iMac to 10.4.8 by downloading the update on another computer and transferring it, since it cannot connect to the net. Will Post the results.

Macbook connectivity to internet via airport extreme is flakey

Hi,
Just bought a brand new airport extreme and I already own a June 2009 Mac book pro w/ snow leopard.
I always run software updater, so the Airport 2009-002 patch/fix is on this system.
I have a strange problem with my connectivity to the internet from my mac via the airport extreme.
Very regularly (and seemingly randomly) the laptops connectivity to the internet will drop out... i.e. websites won't respond, big websites (like google) don't respond to pings or anything. While these internet "drop outs" are happening, i can jump onto my PC (which is connected to the airport extreme via ethernet) and the internet is working fine.
Also, Wifi never drops out through this whole situation. This means that while I can't access the internet, my reception is still FULL and I can SAMBA connect to my PC and with other computers on the network.
It's very strange that purely internet via the Airport Extreme is having these issues.
The Airport is in Bridge mode (which means the ADSL modem/router is the DHCP server). The ADSL modem/router does not have wifi active or anything connected to it (other than the airport).
I've never had any issues with my internet - this is the first. My only real option if this can't get resolved is to return the airport, as this is inhibiting me from working from my laptop.
Anyone else experience similar issues?
Can someone recommend any course of action to work around this issue?
Is there anymore information this forum needs to debug this problem? How can I obtain this info?
I hope someone can help.
Regards,
Vijay

I seem to be in a very similar predicament, however I'm served even worse:
I'm loosing Internet connection over both LAN and WIFI. And the Airport Extreme does not detect the loss of connection even though the logging indicates the internal ntp client (trying to connect to time.euro.apple.com) fails (already on dns resolution).
Currently, I'm dvlp-ing a shell script that checks 4 websites, and if all 4 are unaccessible, I launch an applescript that restarts my airport extreme basestation.
This however does not always seems to solve the problem. Seemingly I would have to reset the modem.
The problem can - according to me - not be provider related, since it does not occur when the TimeMachine is replaced by a SL-installed mac mini (that however cannnot function as router (yet)).
Any hints ? anyone ?
I previously had installed an Airport Extreme 10/100 version, which showed the same behaviour. Since the system was out of warranty, I decided to upgrade to a faster system, including TimeMachine, but unfortunately, the problem is still there.
I'm guessing now it could be related to the router being configured in dhcp (getting its ip address over dhcp), but the server provides a static ip address (never changes),... and maybe here there's something fishy.

Can't access internet via Airport even when I have full signal

MacBook
When I turn Airport on I get full signal from my wireless connection but when I open Safari it says it cannot connect to the internet. I have had my MacBook since December '06 and it never gave me this problem before. Only in the last month is it giving me this problem. I am using the exact same wireless connection as before......i dunno whats going on. Please help.

I was just going to post this exact topic! My iBook connects to my home Airport Express flawlessly, and my iPhone can detect and connect to it, but then it doesn't display the WiFi logo (it still uses EDGE). Any help for the three of us?

Only one of three computers can connect to Internet via Airport

Similar Messages

Maybe you are looking for