Only one output on BOX QIP6416?

The verizon guy hooked my media center pc to my box. The picture is perfect. The problem is I don't have any sound.  The tv is using the outputs on the box. 
How do I get the sound to work on my media center pc? 
Solved!
Go to Solution.

Sounds like you are using the old RCA jack audio (red and white) of which there is only a single output on the box.  The simplest solution is to buy a pair of RCA "Y" connectors which would allow you to split the analog audio to 2 outputs.
Something like THIS .
The "male" goes to the box and the cables to the TV and PC Media Center connect to the "females".
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Similar Messages

  • ALE-IDOC- Multiple IDOCs gets triggered with only one output exists

    Dear Gurus,
    We need you help to resolve the issue being faced with IDOC in our system.
    From Sales order , an EDI output ZF40 gets trigggered which is a order confirmation. This is being sent to a Logical system
    (Partner type LS in IDOC) which is F4F (Partner no.)
    Now the issue is at sales order level, only one output line with ZF40 is triggered and in processing log one IDOC no. is showing.
    We have received complaint from the external party F4F that for a same sales order , multiple IDOCs (around 500 IDOC's each in 3min interval )are being received at their end. We have checked in SAP ,  all these IDOC's were triggered from SAP only. All IDOC's are in green in SAP. But from where these IDOC's got originated is not known.
    We have checked the batch jobs and not seems to be triggered from there.
    Is there any other way that IDOC can originate automatically.? Please advise your valuable inputs as it will help to stop triggering of IDOC's (around 11,000 so far) in SAP and in receiving system.
    Regards
    Anand MOhanasundaram.

    In t.code V/30, go to the output details. Here uncheck the box for multiple issuing and check again.
    Regards,

  • Determining only one output type (out of 4) in delivery header

    Hello everyone!
    We have 4 different Label Output Types (in delivery header). And the requirement is to print only 1 output type (depending on Customer No.)
    I made the 4 output types link to one Access Sequence. Defined some condition records for each Output type and defined the same tables in the Access Sequence. So the access sequence has 4 accesses (exclusive flag checked)
    Now when I create a delivery with a Ship To number which has condition records only for only 1 output type. I mean it passes the first Access in my access sequence and hence should only print the output type that has condition record for that "Ship to" number. Yet it is printing all 4 output types.
    Any help is appreciated .
    Regards,

    Hi Vineet,
    Appreciate your help. I was actually getting it right, don't know what I was thinking. It works good.
    regards,

  • RB_Split fails if only one output

    I am using SP14 and using RB_Split to create multiple output files.
    This works fine as long as there is data to split.
    However, if there is only a single record being sent that does not need splitting then I do not get any output created.
    Looking in sxmb_moni, the message appears to have been processed correctly.
    When I look in the message monitor on the Runtime Workbench, the status of the receiver is set to 'Waiting', and eventually fails.
    What do I need to do to allow this to work as either a single output or multiple outputs?
    Regards
    C

    More detail as requested.
    The source is an idoc from our R/3 system.
    The required output is a flat file.
    I tried deselecting the 'Maintain order at runtime' - this had no effect.
    I cannot use the RB_Classic option, as I do not know how many outputs I am going to get.
    I need to split the data according to customer reference, depending on the events, the incoming idoc can have between 1 and 5000 customers in it, each of which needs a separate file.  If there are 2 or more customers, then the split works fine, the problem occurs if there is only  single customer in the idoc.
    Hope this makes my problem clearer.
    Cheers
    C

  • How to call a stored procedure with only one output parameter using toplink

    Can anybody help me to get out of this exception. I have tried through several ways, but could not find the solution.
    I have a following stored proc : -
    CREATE OR REPLACE PROCEDURE spt_remove_duplicates_pr (outbuffer OUT VARCHAR2)
    IS
    buff VARCHAR2(32000) := ' ';
    BEGIN
    buff := ' Hi From Stored Proc' ;
    outbuffer : = buff;
    END;
    When I am executing it using following code :-
    StoredProcedureCall call = new StoredProcedureCall();
    call.setProcedureName("spt_remove_duplicates_pr");
    call.addNamedOutputArgument("a","a",String.class);
    ValueReadQuery query = new ValueReadQuery();
    query.setCall(call);
    String buff1 = (String) session.executeQuery(query);
    I am getting the exception as : -
    LOCAL EXCEPTION STACK:
    EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3.4 (Build 432)): oracle.toplink.exceptions.DatabaseException
    EXCEPTION DESCRIPTION: java.sql.SQLException: ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    INTERNAL EXCEPTION: java.sql.SQLException: ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    ERROR CODE: 6550
         at oracle.toplink.exceptions.DatabaseException.sqlException(Unknown Source)
         at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(Unknown Source)
         at oracle.toplink.internal.databaseaccess.DatabasePlatform.executeStoredProcedureCall(Unknown Source)
         at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(Unknown Source)
         at oracle.toplink.threetier.ServerSession.executeCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelect(Unknown Source)
         at oracle.toplink.queryframework.DirectReadQuery.executeNonCursor(Unknown Source)
         at oracle.toplink.queryframework.DataReadQuery.execute(Unknown Source)
         at oracle.toplink.queryframework.ValueReadQuery.execute(Unknown Source)
         at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
         at oracle.toplink.queryframework.ReadQuery.execute(Unknown Source)
         at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
         at oracle.toplink.threetier.ServerSession.internalExecuteQuery(Unknown Source)
         at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
         at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
         at com.marshmc.eta.reuse.persistent.PersistentService$DuplicateRemovalThread.run(Unknown Source)
    INTERNAL EXCEPTION STACK:
    java.sql.SQLException: ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
         at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:582)
         at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983)
         at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141)
         at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2149)
         at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2032)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2894)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:608)
         at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(Unknown Source)
         at oracle.toplink.internal.databaseaccess.DatabasePlatform.executeStoredProcedureCall(Unknown Source)
         at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(Unknown Source)
         at oracle.toplink.threetier.ServerSession.executeCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(Unknown Source)
         at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelect(Unknown Source)
         at oracle.toplink.queryframework.DirectReadQuery.executeNonCursor(Unknown Source)
         at oracle.toplink.queryframework.DataReadQuery.execute(Unknown Source)
         at oracle.toplink.queryframework.ValueReadQuery.execute(Unknown Source)
         at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
         at oracle.toplink.queryframework.ReadQuery.execute(Unknown Source)
         at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
         at oracle.toplink.threetier.ServerSession.internalExecuteQuery(Unknown Source)
         at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
         at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
         at com.marshmc.eta.reuse.persistent.PersistentService$DuplicateRemovalThread.run(Unknown Source)

    I got the partial solution. The code is working now, however I am not getting the return value from stored proc.
    The changed code is as :-
    StoredProcedureCall call = new StoredProcedureCall();
    call.setProcedureName("spt_remove_duplicates_pr");
    call.addNamedOutputArgument("outbuffer","outbuffer",StringBuffer.class);
    ValueReadQuery query = new ValueReadQuery();
    query.setCall(call);
    StringBuffer buff1 = (StringBuffer) session.executeQuery(query);
    System.err.println("Done ! Output is : " + buff1);
    The result is :-
    Done ! Output is : null
    How can I get the output ?

  • How to agregate multiple response messages into one output message

    Hello,
    My issue is to send a request to a webservice, and as response i got a message with maximum 100 records. Then if there is more records to retrieve i will have to re send a request in order to have the remaining records until there is no records to retrieve.
    So how can i send back in the end of the loop only one output messsage with all records retrieved ?
    Thank's for all.

    Hi Aheriz,
    If I understand correctly, you can receive a response from webservice with maximum 100 records in it and if there are more records against the request you sent, then you will have to call the webservice again. How do you decide if there are more records?
    Do you get it in some field present in response?
    So you can decide based on it whether to make another call/multiple call to webservice (the loop condition depends on number of records left/100). And about sending one output, you have to aggregate and for that you can use send pipeline .
    Sample is available in the SDK Folder under Pipelines/Aggregator:https://msdn.microsoft.com/en-us/library/aa561747.aspx
    Maheshkumar
    S Tiwari|User
    Page|Blog|Good
    to know for every BizTalk Developer

  • How can i change only one

    hello,
    i need a technique that changes only one side of box. For example a box should only growth in height (not in depth). The thing i'm trying to realize is an animated bar chart via java3d. In this bar chart boxes should represent the bars. With scaling i always manipulate two sides (e.g. positive y AND negative y).
    Your help is greatly appreciated.
    TNX in advance
    JIVI

    you could always just do the two-sided scale and then translate it to the correct position.
    e.g. If height is 512 pix and you scale by 0.5, then it would shrink by 256 pix, or 128 on either side. Simply move it down 128 pix after scaling.

  • How can I make a check box active ONLY if another check box is activated?

    How can I make a check box active ONLY if another check box is activated?
    I have an editable PDF for a client, which contains text fields and check box fields.
    There are three main check boxes (let's call them A, B and C) that the user is required to choose from, and I have given all three the same name in the Name tab of the General tab menu but different export values in order that ONLY one of the boxes can be checked at any time. Ticking one will deactivate another if it is already checked, etc.
    However, I then have a further two check boxes which I wish to become available ONLY if the second one of the above three boxes is checked. Other than that I do not wish the user to have access to them.
    I'm guessing it requires some kind of Action Script or Javascript, which is not my forté! Any help would be much appreciated.
    Regards
    Tony

    See Disabling (graying-out) Form Fields by Thom Parker. It covers both Acrobat and LiveCycle forms.

  • I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.

    I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port.
    To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred).
    ?Is there any Apple TV HDMI port voltage?
    When using a HDMI auto switch to connect two devices to a HDMI TV, the
    Auto switch cable box only works for components that do not output continuous voltage over HDMI port when turned off.
    Do you know of any other solutions? Componets? Actual expierances?
    Full text below.
    Cable : HDMI switches expand the number of available HDMI ports on a high definition television allowing connection of cable boxes, Blu-ray players, and game consoles. A side benefit is that cable clutter is also eliminated by running a single HDMI cable to your HDTV from a switch and relocating the HDMI ports to a concealed location. The problem with most HDMI switches is that you have to either get up to push a button, or hunt for the remote control, to switch sources. The true mark of any great switching component is an ability to perform its function and remain transparent in its operation. This automatic HDMI switch is a plug-and-play away from offering everything you are looking for in an HDMI switch. Select a single output from up to three devices for signal delivery to your HDTV. Smart operation provides complete control for connect-and-forget operation. Powering on a device gives it output priority over the other devices. By powering down the device in use, output priority is returned to the last powered on device. Note: Auto switch function only works for components that do not output continuous voltage over HDMI port when turned off.
    Here is a typical HDMI 3-in 1-Out HDMI Auto Switch
    http://www.google.com/products/catalog?q=hdmi+auto+splitter&rls=com.microsoft:en -us&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGLF_en&um=1&ie=UTF-8&tbm=shop&cid=1 0340892278237558532&sa=X&ei=fTPmTtOiHuXq0gGc3sHfBQ&ved=0CHsQ8wIwAA#
    Thanks for any help. Sincerely,
    HDMI auto switch?

    Hi Erico,
    I tried what you said again but without success. I even updated the driver so that that audio driver is the same as the graphics driver i.e.. NVIDIA but this has not helped either:
    Do you have any other ideas?
    Many many thanks,
    Louise

  • I get a dialog box with a copy of firefox is open and only one copy of firefox can be open at one time.

    I get a dialog box with the following: "a copy of firefox is open and only one copy of firefox can be opened at one time."
    I do not see where firefox is open.
    How do get back into firefox so that i can read the links that are in my emails?
    Thank you.

    Sometimes when FF is closing, not all of it shuts down properly.
    On Windows, start the '''Task Manager''' (Other systems may have
    different names and / or commands). Select '''Processes'''.
    Look down the list for Firefox. Right click and select '''End Task'''.
    If this problem keeps coming up, ask for more help.

  • I can see only one ringtone in the custom ringtone box.plz help

    i can see only one ringtone in the custom ringtone box.plz help

    Cap,
    This view, with the one photo big and the thumbnail strip across the top, is what happens when you double-click a photo with "Edit in: Main Window" set in the Preferences. There should be a button visible that says either Done or Return, to exit edit mode and return you to the library. If you still see only one photo, use the size slider in the lower right corner to reduce the photo size and get more thumbnails on the page.
    If, for some reason, you can't exit the edit mode, you may have a corrupt preference file. Quit iPhoto. Use the Finder to navigate to Macintosh HD/ Users/ (your user name)/ Library/ Preferences/ com.apple.iPhoto.plist and move that file to the Trash. Launch iPhoto, and you should be returned to the main viewing mode. You'll have to go in the Preferences and reset them to your liking.
    Regards.

  • Iphone 5 system serial no doesn't match with outer box? Case of misprint? i see only one latter is serial no doesn't match

    I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
    They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
    I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
    plz help is it normal to have serial no unmatched on phone and box or the phone is not genuine

    You are correct. The SIM Tray of iPhone 5 does not have the Serial #  printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.

  • Output type neu not coming only one vendor

    Hi
    I have maintained for my condition record in nace t.code  for purchase order key combinatinon for document type ZCPO
    so when ever i creating po in me21n t.code using doc type ZCPO my outputype neu coming automaticaly,only one vendor
    code for my doc type ZCPO,neu not coming automaticaly,plz suggest,
    Regards
    Sam
    Edited by: sadaraji on May 1, 2011 12:22 PM

    Hi Sam,
    In MN05 there are different key kombinations. Maybe you have a key combination containg a vendor number before the one without the vendor number (only doc. type). I think this is also the access sequence of NEU in standard.
    In such case, there might be a record for this specific vendor pointing to another printer or no printer at all - and this record screens the output record that you defined for the document type without vendor.
    BR
    Raf

  • I am doing a book.  Can I select the option of 13 photos on a page, put only one photo on the page in the middle box and expect the page to be printed with only that picture surrounded by white?

    I am doing a book.  Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?

    No
    All photos frames must contain photos or you can not order the book
    LN

  • PO - New Output Type to send an email to only One email Address

    Hello Gurus
    We have new requirement to configure Output Type to send PO's to only one mail address.
    We want to send all Purchase Orders of particular Doc Type - 0001 and for one POrg - ABCD to dedicated mail id ( lets say  ( xyz @ gmail com )  ).
    So that we can keep all these PO copies in PDF format at this mail id only (Note: id is not vendor mail id).
    So I would request you all to kindly guide me the steps to proceed for this - How I can configure this new Output type so that every time when we create PO for this criteria it will not get printed to printer but it will sent in PDF format to only one mail id.
    Subject of these mail sent to ( xyz @ gmail com ) should always contain " PO - Number of PO - Vendor Number/name ".
    Thanks
    Animesh Agrawal

    This can be done with the standard form itself.
    first find out the output type u r using.
    Then goto T-code NACE and then choose EF- purchase order and then select the output type u r using.
    Then goto the 'processing Routines' at the lefe side of the screen.
    There u can find out the output forms for this output typr u r using. Here add 'Simple mail-7' in the list and then give the program name and the smartform or the script u r using.
    We can also give the mail texts for this output form.
    After that goto ME22N and then choose the 'Messages' tab and then click the simple mail and in the 'communication method' kindly provide the mail id for which the PO mail has to be sent.
    And then the mail can be viewed in the inbox of the recipient.
    in this way we can sent the PO mail to the corresponding mail address,.
    I guess this will solve ur issue.
    Thanks and Regards
    Siva
    Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM
    Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM

Maybe you are looking for