Only one phone at a time works with two socket ext...

I have BT infinity 2 and a BT smartphone. I wanted to have a second phone. So I bought a BT Telephone Socket Doubler/Splitter.
I plugged it in to the master socket, then the BT Smartphone which worked. Then I added the BT Freestyle 750 extension phone.
I assumed it was working until I got an email saying my phone was constantly engaged. I took out the BT Freestyle 750 and the BT Smartphone worked again.
The extension phone is apparently not designed to be the main phone, so could that be something to do with it?
The BT Smartphone is the most confusing I have ever used. When I make a call a message pops up giving the choice between internet and mobile. It didn't do that at first.
Please can somebody help? I really would appreciate it. Thank you in advance xxx

There isn't really any such thing as a master phone or an extension phone.
I wonder if the problem is that you have two cordless phones, and their base-stations are plugged in right next to each other. It may just be that the DECT signals from both are interfering with each other.

Similar Messages

Only one sound at a time work

Hi
Installed arch linux a couple of days ago and got most stuff up and running. Altho one problem I just noticed it that I can only play one sound at a time. For example, if I have music playing from mpd I don't get any sound from youtube or from urban terror only the sound from mpd will be played. I've googled some, but don't really know what to search for
If you do have a explanation please keep the reply simple as I am still learning
Thanks in advance
Last edited by farner (2009-02-24 12:25:54)

test1000 wrote:
this might be obvious but are you using intel? the youtube and urban terror/any mmap based game is normal.see http://wiki.archlinux.org/index.php/All … nd_at_once. also from the urban terror webpage: "Urban Terror 4.1 can run on Quake 3 Arena or on the free ioUrbanTerror." if you switch to iourbanterror the alsa issue is fixed. or else you have to start any urban terror with et-sdl-sound which only works on i686.
edit: if you check the wiki first for stuff like this you usually get a faster response and you get to use your brain as a bonus to
I actually googled my a* of and searched the wiki, but was unable to find that site. And I do have intel, however after reading
In Linux, only one program can play a sound at a time unless you have a soundcard that supports hardware mixing (all/most onboard soundchips don't.)
I decided to use my pci card (a creative audigy 2 ZS). I have been having trouble before getting it to work so I thought I would use my onboard card instead. But it was fairly easy this time
(had to disable the onboard card in the bios and change the module to snd-emu10k1) and woops it worked
Thanks for all the help
Last edited by farner (2009-02-24 22:33:57)

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

Creating iphoto book and can't seem to view/ work on only one page at a time.

I am creating an iPhoto book and can't seem to view/work on only one page at a time. The Navigator, that allows you to focus on a part of the page is actually 1 1/2 pages in size so 1 1/2 pages are in view when trying to work on one page. What am I doing wrong or how can I fix this. It is very distracting viewing half of a previous page when trying to create a new page and write a story to go with the related pictures.

My Navigator seems to be to large. It covers 1 1/2 pages while in the training information it shows as the size of one page. Is there a way to adjust the size of the Navigator?
You can hover the mouse over the left border of the Navigator - then the cursor will turn into a resize cursor and you can drag the border and make the Navigator panel smaller by enlarging the source list.
Or drag the lower right corner of the iPhoto window and shrink the appliaction window. This will only make the navigator smaller - the source list and information panel will stay the same size.
Regards
Léonie

I formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

Follow these instructions:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Apex mixes applications working with two windows at the same time

Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
Molina

If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

1. Does not start automatically 2. Only ONE user at a time

When I plug the IPOD it should start iTunes automatically (I have the box checked) but it does not. Never has done that. I have the latest 7.1 version.
Another pain in the rear is that only one user at a time can run iTunes. That stinks. If another user has it open you MUST log off, stop them, log on. They ought to make this work for all users as other windows pro rams do. If it is doing NOTHING with the library then I ought to be able to use it.

That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

How to get one crystal report to work with two different backends?

We have a software that can work with either SQL2008 or Visual Fox Pro backend. We are trying to compile One Crystal report that will work with either of the two backends. How to you make sure that your Crystal Report is compiled so that it will work with both backends?
Right now my reports were originally created using the SQL2008 backend and are retaining the DBO reference in the statement, which then will not allow the Crystal report to work with the VFP backend.

You can write your data sets as a command using hand coded SQL. As long as "dbo" is the only schema used in your SQL Server database, you don't need to specify it in the SQL. SQL Server will automatically assume the dbo.
The 2nd thing... The SQL needs to be 100% compatible with both SQL Server 2008 AND VFP. This will limit the list available functions to those that are common to both platforms AND work exactly the same in both platforms.
The other part is to make sure you are using an ODBC type connection instead of OLD/DB. That way all of the connection properties are set on the local machine and the report is simply looking for the System DSN name.
HTH,
Jason

Selecting only one row at a time

Hi experts,
i have following doubt regarding selecting rows from a db:
Is there any way of selecting only one row AT A TIME from a dabase just to collect the data in rows instead of in a unique document containing all the rows?
I would like you to ellaborate on this as i need to send only one row to the IE, and then other row, and so on... without throwing any error!
I have seen that there are SELECT SINGLE and SELECT UP TO 1 ROW, but these two methods are only useful when retrieving only one row, and that does not match my requirements. I need to process all the rows but one by one..
I know that we can use the receiver jdbc adapter as if it was a sender by means of its specific datatype, but how to do it row by row??
Hope i had explained well..
Thanks in advance and best regards,
David

Hi kiran,
Yes, my table has 5 not null fields but i am selecting and updating fixes values so i think that I will definetely go for the next solution:
SELECT * FROM t1 WHERE status='0' and ROWNUM<2;
UPDATE t1 SET status='1' WHERE status='0' and ROWNUM<2;
My only concern is if the update will take the same row that the select.... BTW, I think it will
..What do you guys think?
I ve been trying to operate with your proposed queries but i received some errors. Your queries are very interesting but i think that with the above ones i meet my requirements as the status field will be 0 for not processed rows and 1 for precessed ones (and the update will look for the row that meets the same 'where' clause than the select, and then, and only then, it will set status='1').
The only thing i have to care about is what i questioned before.
Thanks a lot and best regards,
David

Concurrent program to be submitted y only one user at a time

Hi
I have an issue with one of my reports. The report is using temporary tables, those will under go insertion and deletion while the report is running. So, to make sure that two or more concurrent requests submitted for same report, will not conflict, I want to make my concurrent request to be submitted by only one user at a time.
How can I do that?
Any help is appreciated.
Thanks
BalaKrishna

The "run alone" box should not be checked. This indicates that this program can only run when no others are running. Pl see MOS Doc 1078462.6 (Custom SQL Concurrent Program Returns NO MANAGER Error). This option should typically not be used.
To be able to achieve what you need, set the incompatibility (as you have done) and then bounce the concurrent managers for the setting to take effect. Pl see these MOS Docs
436186.1 - Cannot Make Concurrent Programs Incompatible With Itself
142944.1 - How to Make a Concurrent Program Incompatible with Itself
HTH
Srini

Return only one record at a time

I am new to crystal reports so any help would be appreciated. I have a .net app that is a order processing system. When the user is in a record, they want to be able to click on a button an open a crystal report showing only that orders details. I created a crystal report that has the following fields:
Order ID, Product ID, Unit Price, Sell Price, Hours.
The Order ID is the primary key in the database. The report runs fine when clicking the report button in the app, but returns the details for every order in the database. We just need the details of the order that the user is processing. How do I setup the report to only show that order's details? I am using VB 2005 and Crystal v9.
Edited by: sking on Mar 6, 2009 1:12 AM

Brian,
Thank you for all your help. I have been able to setup the report to return only one record at a time. In my app, when I click the report button the PDF opens perfectly with only one record. However, when I go to another record and open the PDF it returns the information from the record id that was set as the default parameter value (crReportDocument.SetParameterValue("Orders", 67). How do I get it to return the report for a different record? Here is the code I'm using. I think I'm really close with your suggestions but I'm just missing one step.
#Region "CrystalReport"
     ''' <summary>
     '''Override the CrystalReportButton_Click and call DisplayReportAsPDF_CrystalReportButton function
     ''' </summary>
     Public Sub CrystalReportButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
      Dim crReportDocument As CrystalDecisions.CrystalReports.Engine.ReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument
      Dim fileName As String = "test.rpt"
      Try
          If fileName.Substring(1).StartsWith(":\") Then
          crReportDocument.Load(fileName)
      Else
          crReportDocument.Load(Me.Page.MapPath(fileName))
      End If
      Catch ex As Exception
          Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
          errMsg += " Please make sure the dlls for Crystal Report are compatible with the Crystal Report file."
          BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
      End Try
      Try
Dim paramValue As CrystalDecisions.Shared.ParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue()
           paramValue.Value = "67"
           crReportDocument.SetParameterValue("Orders", 67)
DisplayReportAsPDF_CrystalReportButton(crReportDocument)
      Catch ex As Exception
          Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
          errMsg += " If this is a deployment machine, make sure network service has permissions to read or write to the windows\temp folder."
          BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
      End Try

Only one user at the time can execute VE01 (due to blockage of VEIAV)

Hi,
As I understand it only one user at the time can execute VE01 (or MEIS for arrivals). If someone is already executing the VE01 transaction the error-message "Table VEIAV is blocked by user XX" appears. It does not matter if one tries to execute it for different legal entities - no parallel processing seems to be possible.
This is a huge limitation for a global concern with many entities operating in the same SAP instance. Does anyone recognize this problem and are there any ways to get around it? It does not make sense that dispatches (VE01) and arrivals (MEIS) cannot be executed for several organizational units at the same time in parallel?
Thanks in advance,
Mats Hansson

yes I know this problem.
One should not maintain much thru this transaction.
for me it is not more than an emergency transaction, as it is not really more than table maintenance thru SM30
You should investigate what entries/changes the users have to make.
Limit these manual entries by having better data in the system, so that SAP can itself create the entries for this table.
Organize more, less users , maybe just one per company who shall maintain VEFU manually.
Train them to prepare their entries before they start using VEFU.
Explain that they should leave VEFU as soon as possible as the block other users.
assign maintenance windows to the users.

Only one of my fans are working on my macbook pro retina 13 inch late 2013 model. Is something wrong?

It appears that only one of my fans are working on my macbook pro with retina display 13 inch late 2013 model. Is some thing wrong? if so how can i fix it?

To my knowledge there is only one fan on all 13" Mac notebooks, Retina or standard screen. Not enough space for a second fan and no Discrete GPU to cool.
So nothing is wrong.

Displaying only one photo at a time

something crazy has happened in my iPhoto program.
i have been using it for years now, but i cannot escape this situation.
my display preference was to see the rolls listed chronologically and from this screen i could open any roll, and by clicking on one of the revealed images, i would view that image, with a scroll list of the rest of the images in my library above that.
the problem now is that when i open iPhoto, i am seeing only one image in the "Edit" window, with the active blue frame around it. there are no images to scroll through horizontally above this blue framed picture. there is a scroll bar to its right that takes me through my entire library a single image at a time.
how do i restore the main screen so that i have a representation of all the film rolls? how do i get out of the single-image/blue border mode i am stuck in?

Hi tubby,
On the bottom right of the window is a slider. Slides the dot to the left to make the image smaller so you can see more than one across.
Lori

Only one phone at a time works with two socket ext...

Similar Messages

Maybe you are looking for