Only one speaker working with Airport Express

Hi,
Hoping for some help. I just connected an Airport Express to my stereo but only one speaker (left) is working. I plugged in headphones to the jack in the AExpress as suggested in other postings and both left and right work there. I have checked and updated Airport Extreme base station and Airport Express firmware software.
I have an older amp (connecting the RCA cables to the TAPE ports since there is no AUX) but both speakers work for everything but the AirTunes.
I am hoping there is a fix since I would really like this to work.
Thanks for any suggestions.
-Jane
Mac OS X (10.4.8)

Thanks for your response and sorry for the delay in
responding. I did take the first set of cables we got
(Y-adapter 2-male to 1-mini) back because we thought
that was the problem. However after I exchanged for a
new cable we have the same problem. I am thinking
that the chances are that we would get 2 sets of bad
cables are pretty slim.
In both cases only the red cable worked for both
speakers but if we only plug in the black cable into
either speaker channel in the amp you can faintly
hear the music and some static.
Arg.
Mac OS X
(10.4.6)
Did you ever get the problem with airtunes just playing through the one speaker? I have the same problem...reckon it is a faulty input port on the express. Did you try an optical cable? It might work as it works differently.
Gaz

Similar Messages

  • Adobe acrobat only prints first page with airport express

    I got my printer (HP PSC1315) to work with airport express using one of the solutions described in these forums. Printing is fine except when trying to print pdf files with adobe acrobat, in which case only the first page of the document prints. Preview has no trouble printing pdfs. Anyone else experience this? Is there a solution?
    Thanks,
    Kevin
    PS- my version of acrobat is acrobat pro 7.0.5

    Figured it out.
    Adobe Acrobat/Reader is apparently very picky about printer drivers.
    I had to have the users delete their mapped network printers from their Printers & Faxes window.
    Then I opened the registry and went to:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
    I deleted the drivers for the printer(s) the customer had mapped (e.g. Xerox 6360DN, .. etc.)
    I rebooted the computer
    I had the customer logon and remap their printer.
    That resolved the issue.

  • Does Apple list available printers that work with AirPort Express?

    Just bought an AirPort Express hoping that I could print wirelessly with my HP 1350 All-in-One, and it won't work. Found out after the fact that my printer doesn't support USB wireless printing.
    I'm looking for a basic color printer to work with AirPort Express for wireless printing by other family members, and I'll continue to use my HP 1350 with USB for scanning and OCR functions.
    Does Apple provide a list of recommended printers that will work with AirPort Express?
    Kevin
    PowerBook G4 1.5 Ghz   Mac OS X (10.4.8)   1 GB DDR SDRAM

    No Apple doesn't any more.
    I have been maintaining a community created list.
    http://tech.ifelix.net/1013.html
    This is an unofficial list of USB printers which are are compatible with the AirPort Extreme Base Station and Airport Express. Printers in bold have been added to the original list that Apple provided.
    Printers in dark red are in fact the only printers I have personally tested.
    Please also note that due to changes in the firmware of both the Airport Extreme base station and the introduction of the Airport Express some printers which are in this list may no longer in fact be compatible.

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • Speakers that work with airport express?

    Hello all
    Can anyone recommend small wall mounted speakers that work with airport express?
    Thanks in advance
    Adam

    I would recommend just about anything from either Bose or Audioengine that are self-powered and provide either analog or digital audio inputs. One example would be the Audioengine A2+ speakers.

  • Does airport extreme 802.11a/c work with airport express 802.11n

    does airport extreme 802.11a/c work with airport express 802.11n

    "You can use the AirPort Express to extend the signal provided by the new AirPort, but the Express will not extend "ac" wireless since it does not have that capability. The Express will extend an "n" wireless signal if that helps."
    This is what I am trying to understand.
    So AXTRM w/ sep SSID for 2.4 (b/g/n) - call it SSID1 - and 5GHz (ac) call it SSID2 - WiFi Explorer confirms AC mode on 5G.
    Using an AXPRESS to extend - I have the option of SSID1 b/g/n *and* the 5GHz ac SSID2 in the pulldown (it sees both?) --> if I select SSID1, it also extends this same SSID in 5GHz (both showing b/g/n) >> so I now have 3 signals on SSID1 (XTRM 2.4G, XPRS 2.4G and XPRS 5G) b/g/n and one signal on SSID2 (XTRM 5G AC) ac
    If I select the 5Ghz ac SSID2 to extend - it prompts me "do you also want to extend (the 2.4GHz SSID1)?" --> select yes and I now have 2 signals for SSID (XTRM 2.4G & XPRS 2.4G) b/g/n and 2 signals on SSID2 (XTRM 5G 802.11ac & XPRS 5G 802.11 a//n)
    Is the 5G SSID2 actually being extended from the Airport Extreme to the Express?
    The reason I bring this up is I am having a lot of issues since iOS8 came out (especially on iPhone 6). Everything I am reading is pointing to when people have 2 AP's set to use the same SSID. When you walk to a part of the house where 5G 802.11 ac signal marginalizes, the phone does not immediately hand over to the 5G 802.11 a/n Airport Express.
    My thought was separate the SSID's but to me, if the Express can't extend 5Ghz from the Extreme, it's taking a step backwards. I am better off getting a more powerful router like an ASUS and going with one AP, drop the WiFi roaming altogether
    Any thoughts?

  • HP LaserJet 1000 not working with Airport Express

    Has anyone had any luck getting a HP LaserJet 1000 working with Airport Express on Windows XP or even OS X for that matter?
    I can connect to the Airport Express device using iTunes, but its pretty muched gimped for printing. uggh.
    MacBook Pro   Mac OS X (10.4.6)   D-Link DI-524

    I've no personal experience with your particular printer but these pages may help you
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
    http://www.ifelix.co.uk/tech/1013.html
    Steve

  • I have a Sony Sa ns300, will it work with airport express to allow me to play iTunes in another room?

    I have a Sony NS 300 will it work with airport express?

    Not from the iPad, but you can from a computer.

  • Will ipod touch work with airport express?

    will ipod touch work with airport express?

    Is your Touch running iOS 5.n? If so, you can administer the AX with the AirPort Utility which you can download directly from the Apple App Store.

  • Will a TiBook with Tiger OS work with Airport Express?

    Will a TiBook with Tiger OS work with Airport Express?

    Use AirPort Utility 5.3.2 for Tiger. It will work with the current Express.

  • HT2995 Only one speaker works when playing music. Is this normal?

    Only one speaker works when playing music. Is this normal?

    This being the Mac mini forum, I naturally presumed you were asking about a mini. But in any case, there's only speaker in an iPhone as well.
    Regards.

  • Will any non USB printer work with Airport express?

    WIll any non USB based printer work with airport express?

    If you have an iPad, you might want to concentrate on printers that are AirPrint compatible, so that you can print from the iPad.
    See this Apple support document for more details.
    http://support.apple.com/kb/HT4356

  • Printers that work with Airport Express

    I am experiencing problems getting my lexmark p4350 printer to work wirelessly with Airport Express.
    Can anybody tell me of any printer,multifunction device,laser printer that will work with AEX?

    MACMV, Welcome to the discussion area!
    Be aware that ONLY the printing feature of a multifunction device will be usable when connected to the USB port on the AirPort Express (AX).
    Checkout "The iFelix unofficial Airport Extreme and Airport Express Printer Compatibility List".

  • When I plug in headphones or use audio jack only one speaker works.

    I have an iphone 4g.  When I plug in headphones only one side works.  When I plug into my car audio jack...only one car speaker works. 

    There is only one speaker, the other side is the microphone.

  • Can't get the Toslink (Optical) out to work with Airport Express

    I have the monster cable hooked up but get no optical out. I hooked up the mini plug to RCA and that works but the optical doesn't. Is there a setting I'm missing. I know the cable is working because I hooked it up to my mini computer and get the red light coming out the end. I don't get any light from the airport expess mini plug to Toslink.

    Same problem here. Just bought an optical cable with the mini toslink connector (to work with the express and computers). I can get audio if I connect the cable to my computer, but no audio from the express. Regular analog audio comes out fine, but I cannot get the optical to work.
    I can't find any preference or setting to change and have tried resetting the base station. Anyone have an idea?
    iMac G5   Mac OS X (10.4.8)  

Maybe you are looking for

  • W540 - Failure due to missing i/o HD light

    Word of warning about TuneUp utilities AVG Zen. Yesterday I got the offer to upgrade my license to the new PC-Tune from AVG.  Failed on the W540 with error @AVGMSI_Error1729 [0xC00706C1]. Advised to run repair file AVG_BFEfix.exe Program says "WORK I

  • Delivery Confirmation Tolerance Issue for TD Shipment

    Hi Experts While trying to do delivery confirmation facing the issue .Please refer the screenshot attached . Can anyone suggest how to rectify this problem .

  • Firefox does not redirect anywhere and I tried but still fails

    when I open my firefox on W8 the thing is that any url I wrote and I write on the search bar and when I hit enter , nothing happens, stays there‼‼‼ like refreshing the site, I know this same problem is happening to others I tried the same procedures

  • Odd box in middle of scr

    When i use the player there is a little box in the middle of the screen. It doesnt do anything but i can move it around. Anyone know what it might be?

  • TS3899 Email problems

    My emails pushed to my iphone from my btinternet account disappear from my inbox after a few minutes. Also, I can't access my old emails as these have disappeared also.