Only one SSID broadcasted using multiple radios, multiple SSIDs.

This topic has been kicked around quite a bit, but I still can't find the answer. I have a Aironet 1200 with the internal 802.11b radio and an upgrade 802.11a radio. I've defined two SSID's, one for each radio. The status page shows both radios as up, but the 802.11b radio is the only one I can use. The upgrade radio doesn't broadcast the SSID, nor will it allow me to connect to it if I manually type in into my suplicant configuration. What's the trick to getting this to work? My 1200 is running IOS 12.3(7)JA2.

Hi Dennis,
issue the command
show controllers dottRadio 0 (maybe 1 too, depending on your interfaces setup.)
Multiple basic SSIDs are supported if the results include this line:
Number of supported simultaneous BSSID on radio_interface: 8
I may be wrong, but afaik the mbssid command is supported with version 12.3(4)JA or later.
Hope that helps
Best regards,
Frank

Similar Messages

ITunes 90 day lock out on iMac - only one AppleID can use a Mac at any one time?

Just found out, the hard way, about Apple's patently ridiculous "90 Day Lockout" policy on iTunes (Match, Purchases download and pretty much ALL the useful features).
Apparently, at least according to Support - who feigned surprise that this was an issue - if you blow £1,200 on an iMac to be used by two people in your home and have paid Apple an extra £25 a head for iTunes Match, you're terribly gullible. And stupid. And a potential music thief.
The real problem is that Apple, probably in a bid to secure record label agreement to iTunes Match and in a vain attempt to curb unlawful music sharing, has decided that NO MORE THAN ONE APPLE ID can be associated with a machine ID at any one time, for iTunes purposes.
This is fine on iPhone, iPod Touch and even iPad. Those are hardware that only one person can use at a time - there is no "multi-user" capability.
Macs, though, are a different matter. In Apple World we're all filthy rich and each member of a household is expected to own a separate Mac machine (iMac, MacBook Pro or Air) to be able to use the functionality and music they've paid for in iTunes and via Match.
If you're stupid or poor or just think a Mac per person in a household is consumerism gone mad, you are stuffed.
In our case we bought an iMac. Set up two separate and distinct User IDs and one of us set up iTunes and activated iTunes Match.
Next day the other went into their User account, set up iTunes and then activated iTunes Match. A very very vague message popped up alluding to "transferring an Apple ID to this machine" and referencing inability to use this AppleID on another machine for 90 days. That seemed OK. The AppleID had been associated on an old Compaq netbook for iTunes, so the assumption was that it was that association that was being transferred to the iMac.
WRONG!
What had happened was that the second person to sign in to the iMac and set up their TOTALLY SEPERATE AppleID on a TOTALLY SEPERATE iTunes Match library and account had effectively locked out the first user from their iTunes account.
So, if you're a family with individual iTunes accounts and iTunes Match don't bother with Apple Mac products. For the cash you spend on one mac product that only one of you will be able to use iTunes on EVERY 90 DAYS, you'd be better off buying separate, higher spec Windo$e laptops to sync with.
Apple has really really fouled up on this.
Support initially justified this lock out policy as being to prevent Johnny Fileshare from zipping round to his mate's house, logging into iTunes with his AppleID on his mates PC or Mac and downloading his paid for iTunes library onto his mates Mac as a gift.
Just how likely such a random outburst of philanthropy at the expense of record labels would be is beyond me.
During a near two hour call with support (use the Call Me function - at least the call is free) eventually, after an escalation, the tech agreed that the 90 days AppleID lock was pointless as Apple themselves publish details in their knowledge base on how to circumvent music sharing restrictions and combine iTunes libraries - even helpfully including details of how to put said combined iTunes library on a memory stick. Johnny Fileshare can then nip round his mates house and share his iTunes content with his mate until the cows come home.
Even worse, Apple even allow you to burn to CD a combined iTunes library up to FIVE TIMES!
But, when it comes to logging into your own iTunes account on a shared Mac? Forget it matey. You'll steal music and can't be trusted.
Well FU too, Apple.
But wait! You may think you're OK because you weren't foolish enough to hand over £25 for iTunes Match...
BEWARE: THE 90 DAY LOCKOUT IS ACTIVATED THE SECOND A USER ON A MAC ACTIVATES EITHER:
1. Automatic downloads, or
2 iTunes Match
OR IF THEY HAVE THE TEMERITY TO:
1. Check previous purchases
THIS RENDERS ITUNES AS A PRODUCT/SERVICE WORSE THAN USELESS ON SHARED MACS.
We have 82 days to wait for one of us to regain access to the library that cost us a fortune to build in iTunes.
1 Week old iMac is being boxed up & returned to Apple Store.
Two high spec non Apple laptops being bought as a replacement. The change to be spent on petrol or pasties - which ever the UK is running out of most...

Yes, I am having this problem because I have 2 Apple IDs/iTunes accounts. Mind you, I don't want 2 accounts but Apple forced me to make a new apple ID when they started requiring email addresses as user ID. This was the first big mistake that Apple made. Their second mistake was not allowing people to simply merge these accounts. Had they not made these mistakes initially, many people would still only have one Apple account/ID. Some bloke ought to lose his job over that.
However, I understand this isn't the same problem as having multiple household members using the same computer. It seems that Apple could figure this all out by either authorizing multiple users at the time of purchase, or allowing a handful of users to download to one computer. After all, if I bought a hard copy of a music CD, I could certainly allow my son or daughter to listen to it or download it to their computer. Next thing you know, I'll have to sign a release saying that I am the only person that uses my iPod.
I am also returning not just one but 2 brand new Mac computers ($4500 coming back from Apple to my wallet) because I am so fed up with the poor customer service response that Apple has given this problem. Not only did they take a ton of my money for iTUnes songs, but then they restricted my access to those songs. I think it's criminal and I wouldn't be surprised if this issue ended up as a class action wrongdoing suit. I have to admit I've considered talking to a lawyer about it myself. I am so sick of large monopolizing companies thinking that they can treat their customers poorly and expect us to sit back and take it. The good news is that this is a free country and I can choose to throw my money at any old company I choose..........Toshiba here I come.

HT4972 My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

My ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

my ibook keeps shutting down completely with the date to reverting back to 1969. i restart only after i plug in charger it lets me, then change date and save. the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
please help! i am at a loss here.
thank you, movie lady
ibook g4

The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

No SSID Broadcast (or connect) even when SSID broadcast is enabled on my WRT54GL?

I own a WRT54GL, Firmware is 4.30.12 (the latest).
I used to be able to connect with the router just fine, 801.11g, WEP security. Recently wireless connectivity stopped working (wired ports are working just fine, with both internal network and Internet access [external]). I just got around to trying again tonight...
It seems that my notebook computer does not *see* the wireless router. I tried connecting with SSID broadcast off (like I used to)... didn't connect.
I turn on SSID broadcast and even changed my SSID name on the router, and saved the config... but my notebook's "wireless networks" dialog still does not show my router (but it does show 5 of my neighbor's routers).
What would make an SSID not show up on my client "wireless network" dialogs, even though I tell the router to broadcast it?
Has the wireless portion of my WRT54GL simply died?

Please don't take this as an arguement, but I don't understand the logic of your troubleshooting steps.
I have no problems with Internet access, and my wired network works perfectly. So there seems no point in expanding the problem to include my broadband modem, right? My problem seems pretty well isolated (for now) to my WRT54GL only, since it is the immediate device that my notebook is unable to connect with (or see).
My firmware is the latest and was updated before I posted (see version # in my original post). I has already recycled the power. I didn't try the reset button... will try that next, but am not very hopeful :-(

HT4539 When having multiple user accounts on a mac can only one of you use the automatic downloads in iTunes?

Why is it that in itunes on a mac, if you have multiple users, that only one apple id can be used for automatic downloads?

See if this helps: iTunes: How to share music between different accounts on a single computer

There is only one app at "USE CELLULAR DARA FOR:" field

How can I make other apps to appear at "USE CELLULAR DATA FOR:" field?
There is only one app "Passbook" is on that list and I cannot use Cellular data for other apps at all.

Hi sberman,
Thank you for your answer.
Restrictions is currently off.
Anyway I found that my SIM card is not working on 3G.
I replaced my SIM to other one and it works fine even without apps on the "USE CELLULAR DATA FOR:" field.
Still don't know how to add apps on this field.

Once I have my picture from iphoto into the print mode and select contact sheet only one pic shows up not a multiple of that one picture. Help

I have selected one picture from iphoto then went to print where i selected contact sheet...the one pic showed up on the contact but was unable to fill the sheet with the multiple of the one picture

The root level of the drive that is mounting. Like this

Can I Lock an Ipod So That Only One Computer Can Use It?

So I just bought my grandma an ipod and plan on putting all of her music and such on it for her. What I want to do is make it so that only my computer can access the files and if another computer tried to use the ipod it would lock, I don't want to use the screen lock either. Is there any way to do this through iTunes or not? Thanks alot.

Oh, I'm so sorry.
Dear jmentzer262,
Your brilliant plan cannot be put into action I'm afraid. Apple have not seen fit to include this feature. I'm so sorry that we cannot help you implement this.
There is no doubt that we here are not worthy, and I for one will try my utmost to do better in answering any of your questions in the future.
I understand that when answering a question it is not sufficient to say "it can't be done", as I realise that when dealing with someone is so sensitive we must temper our replies accordingly.
Please accept my humble apologies for my "attitude" and you can rest assured that I have punished myself severely for this unacceptable lapse of judgement. Can you ever find it in your heart to forgive me?

Using a Mac Pro, how do I play only one playlist and use shuffle?

How do I play a specific playlist in itunes and use shuffle?

Go to the playlist. You'll see the intersected lines (shown below). Click on that and press play.

Is there a way to block one of the monitors, so only one app can use it?

Ok, here is the story: Right now I'm using Logitech G15 keyboard. It's almost 10 years old, so it's time to buy something new. However, I'm quite used to having additional screen with computer info (date/time/CPU and RAM usage/temp/etc) without switching my
Windows. However, Logitech G19s is the last keyboard with screen feature and it's still quite ridiculously expensive. So - my idea is to create my own "screen with PC info".
There are some 5-10 inch screens that I could plug in and create a full screen app, that will show all the data I need. However, having a 5 inch screen connected could mess up my "workflow" on my full size monitors.
So, my question is: Is there a way to create an app, that runs on system start, takes "ownership" of that small monitor, disabling it for Windows to (for example) extend desktop?

Hello Quarien,
>>Is there a way to create an app, that runs on system start, takes "ownership" of that small monitor, disabling it for Windows to (for example) extend desktop?
If I understand correctly, you want your application to be displayed on the extended screen, if it is, you could have a try the
SetWindowPlacement function and
GetWindowPlacement function to determines the monitor the app runs on, for details, you could check this link:
http://stackoverflow.com/questions/52755/what-determines-the-monitor-my-app-runs-on
And if you are using C#, there is a demo example:
public partial class Form1 : Form
[DllImport("user32.dll")]
static extern bool SetWindowPlacement(IntPtr hWnd, [In] ref WINDOWPLACEMENT lpwndpl);
[StructLayout(LayoutKind.Sequential)]
private struct WINDOWPLACEMENT
public int length;
public int flags;
public int showCmd;
public System.Drawing.Point ptMinPosition;
public System.Drawing.Point ptMaxPosition;
public System.Drawing.Rectangle rcNormalPosition;
//Definitions For Different Window Placement Constants
const UInt32 SW_HIDE = 0;
const UInt32 SW_SHOWNORMAL = 1;
const UInt32 SW_NORMAL = 1;
const UInt32 SW_SHOWMINIMIZED = 2;
const UInt32 SW_SHOWMAXIMIZED = 3;
const UInt32 SW_MAXIMIZE = 3;
const UInt32 SW_SHOWNOACTIVATE = 4;
const UInt32 SW_SHOW = 5;
const UInt32 SW_MINIMIZE = 6;
const UInt32 SW_SHOWMINNOACTIVE = 7;
const UInt32 SW_SHOWNA = 8;
const UInt32 SW_RESTORE = 9;
public Form1()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
WINDOWPLACEMENT param = new WINDOWPLACEMENT();
param.length = Marshal.SizeOf(typeof(WINDOWPLACEMENT));
param.showCmd = 5; //SW_SHOWNORMAL
param.ptMaxPosition.X = 100;
SetWindowPlacement(this.Handle, ref param);
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to call a stored procedure with only one output parameter using toplink

Can anybody help me to get out of this exception. I have tried through several ways, but could not find the solution.
I have a following stored proc : -
CREATE OR REPLACE PROCEDURE spt_remove_duplicates_pr (outbuffer OUT VARCHAR2)
IS
buff VARCHAR2(32000) := ' ';
BEGIN
buff := ' Hi From Stored Proc' ;
outbuffer : = buff;
END;
When I am executing it using following code :-
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("spt_remove_duplicates_pr");
call.addNamedOutputArgument("a","a",String.class);
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
String buff1 = (String) session.executeQuery(query);
I am getting the exception as : -
LOCAL EXCEPTION STACK:
EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3.4 (Build 432)): oracle.toplink.exceptions.DatabaseException
EXCEPTION DESCRIPTION: java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
INTERNAL EXCEPTION: java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ERROR CODE: 6550
     at oracle.toplink.exceptions.DatabaseException.sqlException(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabasePlatform.executeStoredProcedureCall(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(Unknown Source)
     at oracle.toplink.threetier.ServerSession.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelect(Unknown Source)
     at oracle.toplink.queryframework.DirectReadQuery.executeNonCursor(Unknown Source)
     at oracle.toplink.queryframework.DataReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ValueReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ReadQuery.execute(Unknown Source)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
     at oracle.toplink.threetier.ServerSession.internalExecuteQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at com.marshmc.eta.reuse.persistent.PersistentService$DuplicateRemovalThread.run(Unknown Source)
INTERNAL EXCEPTION STACK:
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:582)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2149)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2032)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2894)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:608)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabasePlatform.executeStoredProcedureCall(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(Unknown Source)
     at oracle.toplink.threetier.ServerSession.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelect(Unknown Source)
     at oracle.toplink.queryframework.DirectReadQuery.executeNonCursor(Unknown Source)
     at oracle.toplink.queryframework.DataReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ValueReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ReadQuery.execute(Unknown Source)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
     at oracle.toplink.threetier.ServerSession.internalExecuteQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at com.marshmc.eta.reuse.persistent.PersistentService$DuplicateRemovalThread.run(Unknown Source)

I got the partial solution. The code is working now, however I am not getting the return value from stored proc.
The changed code is as :-
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("spt_remove_duplicates_pr");
call.addNamedOutputArgument("outbuffer","outbuffer",StringBuffer.class);
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
StringBuffer buff1 = (StringBuffer) session.executeQuery(query);
System.err.println("Done ! Output is : " + buff1);
The result is :-
Done ! Output is : null
How can I get the output ?

Customizing filename when using an external editor - can only one filename be used by all editors?

I have a number of external editors defined for my LR 3.3 Win7 application. Within my Preferences, when I customize how an editor, say, Photoshop CS5, handles a file, I can set the name of the edited file - e.g., {Filename}-ed.psd . However, if I change the edited filename for another external editor, say to {Filename}-SilverEfexPro.psd, that filename is used for all externally edited files. What am I doing wrong? Thanks!
Dilip

A side note here; just because it _opens_ the file in your external editor with that name the first time, doesnt' mean that's the name it has
to be saved as. When you go to save it, select save as, instead of save. I beleive I have used this technique before, and LR still "finds" the file.
Sometimes even when I don't *want* it to find the file!
Cheers!

One Bind Variable used in multiple VOs jdev 11.1.2.3 redhat 5.8

Hello:
I have multiple View Objects and each view object needs to use a bind variable. I would like each VO to reference the same bind variable.
Example: I have 3 VO and in each VO where clause I need something like emp_key = :p_emp_key, but I want only one bind variable used in each VO. Is this possible?
So I would like to create one drop down list of values for all the employee names and have all the view objects reference the selected value key of the drop down for employees.
Each VO should reference the same employee selected.
What is the best way to accomplish this?
Thanks much.

Also, you can try the programatic way if it suits your requirement:
1. for all 3 VO, make them extend a base class
2. have a common property with relevant getter and setters in the base class - eg. private String myjob
3. set this varaible from the view(page/screen - button click/dropdown selection etc) using EL
4. in each VO using groovy to access the set variables like this -> adf.object.viewObject.myjob
5. call execute query on requried vo

Anyone know how it works to have multiple websites on iweb? I would like to make a separate one from the one I'm using now and have them both up and running

Does anyone know how it works to create more than one site on iweb - I have my primary site and mobile me connected to my domain name for that site, but now I'd like to add a completely different site and domain name.

Here is some additional info on multiple sites in a single MMe account:
How to have multiple sites in a single MMe account with one or more sites having a domain name.
A. All sites are in the same Domain.sites2 files
1 - only one site can use the CNAME method of domain name forwarding and it must the top site in the left hand pane of iWeb.
Click to view full size
2 - the other sites must use URL domain name forwarding which directs the domain name to the site's full MMe URL, http://web.me.com/MMe_Username/Site_Name, or, if there is no domain name, just MobileMe's full URL.
B. Each site is in its own Domain.sites2 file.
Again, only one site can use CNAME forwarding. This presents a problem since CNAME forwarding directs the domain name to the basic MMe account URL: http://web.me.com/MMe_Username/ which uses an index.html file in the root folder of the account, iDisk/Web/Sites. Each time a new site is published or an existing site uses the File->Publish Entire Site a new index.html file is created in that root directory, iDisk/Web/Sites folder, directing the browser to that particular site. This file is what the CNAME method uses to find the site it represents. Therefore some steps must be taken to assure that the index.html file in the MMe Accounts root directory always points to the correct site. This can be accomplished is three ways.
1 - don't use the CNAME method. Just use URL forwarding . This, IMO, is the simplest method as it doesn't requre any additional effort on the user once the domain name has been set up.
2 - use the following method suggested by Wyodor in this topic: Is it possible to have multiple sites when using ur Domain name?
In iWeb domainfile 1:
Create a dummy site : _dummy
with a blank page.
Create your working site : Whatever
Add pages
Publish both Sites to the same same location on the same server.
Your _dummy site is now the default Site.
Check.
In iWeb domainfile 2:
Create/Use your CurrentSite.
Move a page to the top of the Site and back. Publish the Site.
iWeb will create a new index.html file in the root of the server and from now on CurrentSite is the default site.
Check.
From now on, never move your Whatever Site to the top of the list in the iWeb sidebar and never change the page in the _dummy site.
Simply do not touch your _dummy ever again. And never forget that.
3 - use Ethmoid's suggested method in Using two sites - setting one up with separate domain? or republishing the entire site that uses CNAME forwarding. Just making a minor change and publishing the site changes does not create a new index.html file.
The entire site must be republsihing in order to get that new site.
Or keep a copy of the CNAME site's index.html file on your Mac and replace it manually in the iDisk/Web/Sites fodler when necessary.
NOTE: the CNAME method provides a shorter URL: http://www.Domain_Name.com/Site_Name/Page_Name. CNAME does not have masking.
The URL forwarding displays the full MMe URL:   http://web.me.com/MMe_Username/Domain_Name/Page_Name.   With domain name masking that will be shortened to:   http://www.Domain_Name.com for every page of your site.
WARNING: with masking visitors will only be able to bookmark and enter at the first page of the site. If a page is refreshed the visitor is taken back to the first page. Also search engines will only be able to index the first page of the site.
OT

Only one SSID broadcasted using multiple radios, multiple SSIDs.

Similar Messages

Maybe you are looking for