Only one website loads, if another address is entered in the bar, Firefox doesn't respond at all.

I am unable to access any site in Firefox bar one. the address bar shows a small square symbol in place of the Firefox icon next to the address when you hit the go button. There is no apparent response at all.
Internet explorer is working fine through the same network.
Device is a Galaxy Tab 3 7 inch.

Hot key '''<Control> O'''
You may find an add-on that can place an icon on your toolbar.
Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
(There’s a lot of good stuff here) and search for what you want.

Similar Messages

Is there a way to set firefox so it only allows access to only one website / (ip address).

Is there a way to set firefox so it only allows access to only one website / (ip address) and block traffic from everything else (the entire web) other than the one site I want to allow? The site I want to allow is a corporate web application that will only work in firefox. We as a business run a windows server and all client desktops run Internet Explorer with security setting controlled by group policy. We have already locked down the security setting in firefox so users can’t bypass the proxy server settings.

I have a proxy server set up (Symantec.cloud). Fire fox is “locked” so users would find it difficult to bypass it.
I have a file: '''local-settings.js '''
This is located in: C:\Program Files (x86)\Mozilla Firefox\defaults\pref
The content of this file is:
''pref("general.config.obscure_value", 0); // only needed if you do not want to obscure the content with ROT-13
pref("general.config.filename", "mozilla.cfg");''
I also have the file: called: '''mozilla.cfg'''
This is located: C:\Program Files (x86)\Mozilla Firefox
The contents of this file is:
lockPref("network.proxy.type", 5);
All that is working fine, users can’t easily change the connection settings.
So all that is good and works…
What I would also like to do is set firefox so access is limited to 1 IP address and nothing else is allowed (the whole internet is blocked, except this one IP address).
You suggest using a PAC file - I was unsure how I would use a PAC file, (I have never written one) and do not understand how I would implement one? Please help.

Internet Problem - One site will load, another won't. Then mintues later, the site that previously would load won't and the one that wouldn't will. I'm also pulling up a lot of pages in all text. Pics won't load or only one will load and the rest won't...

Several weeks ago, I began to have some very strange internet connection issues. All the lights on my modem stay on and my computer shows full wi-fi signal, but I suddenly I won't be able to load any pages. Other times, I'll be able to load pages from one site, but not another. It's not the same sites all the time though.... sometimes I'll be able to load pages from one site and not another, and then 5 minutes later it'll switch and I'll be able to load pages from the site I previously couldn't and I won't be able to load pages from the site I previously could. A lot of pages are coming up just text with no pics... and then 5 mintues later that site will load normally and another site will come up just text. It does the same thing whether I'm connecting wirelessly or via an ethernet cable. It also doesn't matter which browser I use (I've tried Safari, Chrome, and Firefox). Although, once in a while when using chrome, I get a DNS error page instead of the usual 'cannot find server'. I contacted my service provider and I'm not losing speed or dropping packets. According to them, the problem I'm having is very strange since diagnostic tests show no problems at all. Perhaps someone has run into this before and has a suggestion?

Then if you have tried all the browsers try connecting the system to yoour router with an Ethernet cable and turn WiFi off. If you have the same problem then it more then likely after your computer, Router or modem or connection from your ISP.
If you get good browsing with the Ethernet cable then it is either the WiFi card in your Mac or the WiFi system in your router.

One of the pages in my website will not display the Amazon links to books I sell. Only one book, wiich is not on Amazon displays on the page. On Internet Explorer, all my books display. why?

Ever since converting my website to WordPress the "Recommended Reading" page doesn't display the book I listed that link to Amazon. Only one book linked to another website displays, but not of the Amazon Books.
This does not happen on Internet Explorer. I have asked this question last week but have not received a response.
Can you help? Go to: www.transitionexecs.com and click on "recommended reading" to see what I mean.

Do you have any ad-blocking software?
Those links have ad in the url that might trigger such software.
See:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Only one usage of each socket address is no normally permitted....

I am getting the below error?
In logs the below error is showing:
java.lang.Exception: Socket bind failed: [730048] Only one usage of each socket address (protocol/network address/port) is normally permitted.
Could you please give some idea to sort out the below issue.
Thanks in Advance.
Hi All,
I m new to JSF, spring and Hibernate web application. I have done a web project using JSF, Hibernate and Spring. We have to maintain the Data records which is stored in mysql db. Now there are different table is there such as example Employee Details and Company Details. So we created two seperate application o tomacat, For both Application we use same functionality except the JSP FILE Name and table name (Which is changed according to Application).
In the employee.hbm.xml
I changed the table name.
Now while running the application on the tomcat server, only one application is running at a time. if we start running the Employee Application, then Company Application is giving the below error,
Error:
The Company is not Available
Error in Log:
The resourse is already in used/busy. or JNDI error.
Could you please help us, how to overcome the error,
Is it not possible to run both the application on different browsers.
Thanks in advance.
Saratha.

Saratha wrote:
I am getting the below error?
In logs the below error is showing:
java.lang.Exception: Socket bind failed: [730048] Only one usage of each socket address (protocol/network address/port) is normally permitted.
Could you please give some idea to sort out the below issue.
Thanks in Advance.The port is already in use by another process. Apparently you've another process (the same or another kind of application server) running at the same port.
This problem is completely unrelated to JSF.
Hi All,
I m new to JSF, spring and Hibernate web application. I have done a web project using JSF, Hibernate and Spring. We have to maintain the Data records which is stored in mysql db. Now there are different table is there such as example Employee Details and Company Details. So we created two seperate application o tomacat, For both Application we use same functionality except the JSP FILE Name and table name (Which is changed according to Application).
In the employee.hbm.xml
I changed the table name.
Now while running the application on the tomcat server, only one application is running at a time. if we start running the Employee Application, then Company Application is giving the below error,
Error:
The Company is not Available
Error in Log:
The resourse is already in used/busy. or JNDI error.
Could you please help us, how to overcome the error,
Is it not possible to run both the application on different browsers.
Thanks in advance.
Saratha.What is this? Why have you copypasted the question of your another topic? [http://forums.sun.com/thread.jspa?threadID=5332093]

How to resolve error 'The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted'

One of my exchange 2010 servers dpm agent is give the following error when the dpmra service attempts to start.
The DPMRA service terminated with service-specific error Only one usage of each socket address (protocol/network address/port) is normally permitted..
I have tried uninstalling/reinstalling the agent but this does not resolve the issue
Any help would be greatly appreciated.
Thanks
William Hickson

Hi
Something has probably changed on the protected server side that affects the DPM agent. In some cases the DCOM configuration could change. Look at this blogpost and verify your DPMRA DCOM object.
http://robertanddpm.blogspot.com/2010/08/dpm-ra-rights.html
If this doesn't do the trick try reinstall the agent.
Best Regards
Robert Hedblom
MVP DPM
Check out my DPM blog @ http://robertanddpm.blogspot.com

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

Www.Onereceipt.Com<http://Www.Onereceipt.Com>
Sent from my iPhone

How can i enable my cookies for only one website?

how can i enable my cookies for only one website?

CShaya wrote:
how can i enable my cookies for only one website?
Safari
There is no preference setting available for that.
Best.

HT1203 How do you put music from one itunes account to another? Can you drag the music?

How do you put music from one itunes account to another? Can you drag the music?

You can use Home sharing

HT4527 how can i transfer my purchases from one windows pc to another without having access to the pc with the music on as it is broken

how do i transfer my purchases from one windows pc to another without having access to the pc with the music on it , as it is broken ?

on new pc - open itunes. sign into your account. go to settings. authorise the pc you are now using. go to account in itunes store. download purchases. simples.

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
Picture below, many thanks for your help.
Jason

Back up all data before proceeding.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
Start up in safe mode to rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If you still have problems, then from the Font Book menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Why do PDF files in email open in safari with a quick time logo but only one page shows and I can't scroll through the following pages?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?

I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing

Since updating my iPad 2 to ios8, it safari has been slow and crashing and some of the apps acting wierd. The password app doesn't work at all so had to find another way of retrieving all my passwords. Very very dissapointing. It appears from these forums that a lot of people are having the same problems wit this latest update.

Hi erastyle,
Actually the Licensing information for the package is missing hence it is not launching any applications. You need to Reserialize the products using APTEE which you can find it on the Machine where you have created the package. If you dont have the access to that Machine then please download and install Creative Cloud Packager and it will download APTEE in the below mentioned location.
Windows:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities
Once downloaded please follow this KB article to use the Tool.
http://helpx.adobe.com/creative-cloud/packager/provisioning-toolkit-enterprise.html
Please let us know if it helps.
Regards,
Abhijit

Only one website will not load.

There is one specific website that will not load for me. It will not load on IE, Chrome or Firefox. But it works on any browser on my phone or on my families laptops.
The website loads a blank white screen and when I view the source code there is nothing except the line number 1 and a blank line.
To access this page I click on a link, I have tried opening in the same tab, new tab, new window, new private window but to no avail. I have given the website every possible permission I can, allowed everything to run on the page. There are no add ons, no cookies, no temporary history and hardware acceleration has been disabled. But nothing solves the issue that I have. After reading questions looking for help none of the generic answers provides any help then what I have already done.

If it won't open on your PC then it's not a Firefox issue and we really can't help you with your issue.

Only one website loads, if another address is entered in the bar, Firefox doesn't respond at all.

Similar Messages

Maybe you are looking for