Only part of project can be rendered.

I have a 35 min. project but only the first 9 mins. are under a yellow line along the bottom of the WAB. The yellow line does not extend for the full timeline. What's up? All of the clips are from a single .avi file that I'm editing. Using PrEl 12.

If there is no yellow orange line above clips on your timeline in Expert view, then the clips with no yellow orange line above them don't NEED TO be rendered.

Similar Messages

Problem rendering -- only part of the comp gets rendered

I'm puzzled as to why our comps are only getting the first part rendered. then it stops and the rest looks like a still image. could this be a memory issue?
We're using IMacs with Tiger.
Thank you!

It's all being done from local files, either on the hard drive or on a flash drive. no network involved.
It would seem the iMacs can't handle it for some reason. They hav 1GB RAM and the processor is wGH PPC G5
This morning i tried the same file on a different computer in the lab, (the instructor's computer) a tower, memory: 1 GB, processer: 1.8, 1.8 GHz Power PC
g5, and it works on that one.
I'm puzzled because last year with the same computers we had no problem. It was the previous version of After Effects, fwiw.
While i'm relieved to see that it could work on the instructor's computer, i'd like to know if there's anything that can be done to make the iMacs work too. are there settings i should be looking at in Preferences perhaps?
Thanks much.

Export only part of project,timeline

Is there option to export only few clips directly from project,timeline?.. When I go to share I can share only entire project.
Or I must duplicate project, and delete everything what I don't want to share?

Another method is to use the Range Tool (R key).
Select what you require and only the selected section will export.
Al

My Option window in Firefox displays only partly. I can't change the download folder. 'Browse' is not showing. And the Advanced tab is not showing either

The Option Window in Firefox is incomplete. It only shows
General, Tabs, Content, Applications, Privacy, Security, Sync
The Advanced Tab is not showing and the Browse button to change download location is missing also.

If you are using an add-on theme switch to the default theme. If that isn't the source of your problem ....
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries?

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.

If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on. The iCloud calendars will then download to your phone.

Can I burn only part of a song

Is it possible to burn only part of a song and put only the edited portion onto a CD? Please let me know - thank you!

Go to Get Info for the song and then select the Option tab. There you can specify a different start and/or stop time. Once that's done, when you burn the song to a CD it will be "trimmed" according to your settings.
In addition to this working for CD burning, it also works for making a digital copy of the song without burning to CD. Once you set the start/stop time, select "Convert Selection to (whatever your current import format is set to)".

'project must be rendered before it can be encoded'

Why do I always get the message 'project must be rendered before it can be encoded' when I try to export using quicktime conversion to product an mpeg2 for DVD Studio Pro?

Beeeeeecause the project must be rendered before it can be encoded.
Based on my experience, this is the workflow you should use for going from Final Cut Pro to DVD:
1. Finish your project. You'd be amazed how many people forget this step.
2. Export a QuickTime reference movie. That is to say, do "Export" then "QuickTime Movie," but leave the "make self-contained" box unchecked.
3. Drop the resulting QuickTime onto Compressor.
4. Select one of the DVD encoding presets, based on the length of your material. Use one of these:
DVD: Best Quality 150 minutes
DVD: Best Quality 120 minutes
DVD: Best Quality 90 minutes
5. The encode will go as fast as it can, depending on how you set up Compressor. If you're using eight processors, it'll go pretty darned fast.
6. Drop the resulting ".m2v" and ".ac3" files onto the "assets" window in DVD Studio Pro. Place them on a track, and finish your DVD just like you would under any other circumstances.

Thunderbolt connection to projector doesnt work: only part of the screen is projected. Solution??

When I hook up my air to a LCD screen only part of the image on the air is projected. Solution anyone?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.
If you've gone through ALL the troubleshooting steps and you're still having the problem, then you most likely have a hardware issue and will need to bring your phone to Apple for evaluation.

I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as ea

I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as easily as someone with 50 projects. In other words, is there a way to make the form "expandable?"

Hi Ms Buckner,
Yes, you can do this with the Show/Hide "Skip" logic rules.
1. Suppose, for example, you have your first ten projects showing by default.
2. At the end of those fields, you would have a Yes/No question asking if the person wanted to add more projects.
3. If they answer "No", they move on to the next section/area/question/etc.
4. If they answer "Yes" you have the form display ten more project fields that you had already included, but you had hidden up to this point.
5. Repeat steps two, three, and four as often as needed. (It helps that you can copy and paste fields, including groups of questions, so you don't have to manually re-create them each time.)
It means you must anticipate the maximum number of times you want to provide project fields, but you've already done that, and you have to build the form with that maximum number, but only display smaller portions at a time until they have filled in all they need.
I hope that helps,
Brian

HT4484 how can i change my security questions??????? its the only part that dont have the edit part

how can i change my security questions??????? its the only part that dont have the edit part

Call AppleCare for your country and ask for help resetting the questions.

I downloaded audiobook from iTunes. It comes in 2 parts. Part one will not play, only part 2. When I tried to sync to ipod or iphone it prompted,"file could not be reaf from or written to".Can I fix this issue?

I just purchased and downloaded an audiobook from iTunes. I tried to sync it to iPhone 4 and iPod Classic but with both devices got a message"file could not be read from to written to". Then I tried to play the audiobook in iTunes and realized that only part 2 of my 2 part download will play. Part 1 will not play. Is this why I got the message? Is there any way to get another try at downloading my audiobook I just paid $15 for??

Click the Shuffle button at bottom left of iTunes window so the crossed arrows are not blue.

HT1727 I downloaded my previous song purchases to my new MacBook and they are all only parts of the songs.. How can I fix this?

I downloaded my previously purchased songs to my new macbook, but only parts of each song are available. How do I fix this problem?

Delete the Song(s) and re-download...
See Here > Download Past Purchases
http://support.apple.com/kb/HT2519
If no joy... Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

How do i get the "part of project not played" error to stop?

My garageband app lately has been absolutely awful and everytime i do any recording will not let me play it back if im playing multiple tracks over eachother. In one project I have there is only one real acoustic track and when trying to record over it I am not able because a message is constantly popping up saying that the project can't be played because it has too many tracks, effects, or notes. I don't understand how this can be the case as I only have two tracks, no effects and minimal notes so there doesn't seem to be any reason why the project shouldn't be able to be played or recorded in real-time. Any help/suggestions are greatly appreciated.

In addition to Edgar's explanation -
is your profile signature "GarageBand (Mac) '11, OS X Mountain Lion (10.8.5)" still current? Just in case you already upgraded to OS X Mavericks, make sure you updated to the latest version 10.9.2. The 10.9.1 version had problems with the memory management, that have been fixed in the new update.
You can check, how much memory is used by your applications from the "Activity Monitor" utility. You will find it in the "Utilities" folder in the "Applications" folder. Launch it and click the "Memory" tab, to see which applications are competing with GarageBand for the memory and should better be closed.
To free as much memory as possible at once, restart the computer, if you are continually seeing "Part of project not played".

Project Server 2010:- How to add Own Workspace filter in workspace web part like project server 2007

Hi All,
I am using project server 2010.
Can some one advise me how can I add Own Workspace filter option in workspace web part like project server 2007 which is showing all projects name page by page. There no filter option available. I am not sure if there is any out of box feature.
Thanks in Advance..

Nitin,
PS2010 shows by default the workspaces you have permissions to. Unfortunately, there is no more filtering options available.
The only solutions are to write a custom webpart, or develop your own SSRS Report, which you can customize the way you want.
Refer to Paul's excellent blog post on this topic here:
http://pwmather.wordpress.com/2011/08/05/custom-projectserver-project-site-workspace-view-in-pwa-ps2010-ps2007-epm-msproject-ssrs/
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?

Is there a way to play an mp4 file at the beginning of a published project only when the project is accessed from a specific site?
A little background info. I use Captivate 7 and currently have over 100 projects that I maintain on a quarterly basis. I publish using the SWF format and upload the swf/htm files to a server where they are then accessed from a few locations (within our online documentation, in our software product, on two different websites). Many of the projects are linked so some will be viewed as a series and others viewed as a standalone video. Each video uses the same template and includes an intro and end slide. Now my organization wants to implement a new intro to all videos (those I publish and those from several groups across the organization). My current intros provide overview material for the specific video so the new intro, which is an animation with audio in mp4 format, would need to be placed at the start of each project. The issue is, the intro adds 9 seconds to every video and in many cases doesn’t add any value (say, if a user accesses the video from within our product or views the videos as a series). I’ve talked it over with my boss and we want to try to add the intro only to videos accessed from site X, not any other location. So now to my question. Is there a way to play an external mp4 file (intro) only when the published project is accessed from a specific site, therefore eliminating the need to update each project? Maybe there's a way to add a parameter or variable to the URL or the html code?
Thanks in advance for your suggestions. Please let me know if you need additional information.

AimeeLove,
I have a solution for you. You may have to modify the code a little bit based on how long the timeline animation is for your clock. I based mine on 3 seconds to complete a minute hand sweep around the clock.
Milliseconds for each point on the clock:
12 = 0
1 = 250
2 = 500
3 = 750
4 = 1000
5 = 1250
6 = 1500
7 = 1750
8 = 2000
9 = 2250
10 = 2500
11 = 2750
In the mouseover section for 12 o' clock, put this code...
myVar = setInterval(function(){
     var pos = sym.getPosition();
     if (pos > 0 && pos < 50){
          sym.stop(0);
          clearInterval(myVar);
},10);
When you point to the time, the setInterval method loops every 100th of a second and checks the current position of the timeline. When the timeline reaches the range between 0 and 50 milliseconds (almost impossible to hit 1 specific point), the timeline will stop at 0. Also, the clearInterval will be fired to stop the loop.
In the mouseout section, put this...
sym.play();
clearInterval(myVar);
It start the clock again, and it also clears the loop in case you mouseout before you reach the range.
Make sure that myVar is a global variable so you can clear it from the mouseout section.
Repeat this for each point on the clock. To avoid potential conflicts, you may want to use my12, my1, my2, etc. instead of myVar. I put the milliseconds at the top that you would use as the beginning of the range. 50 milliseconds should be enough to catch it. So, for 5 o' clock, you would make your range between 1250 and 1300.
Let me know if you have any questions. Thanks!
Fred

Only part of project can be rendered.

Similar Messages

Maybe you are looking for