Only preinstalled apps work now, how do I get to use my other apps again? I have 3GS with newest update but all of my itunes apps crash directly when I try to launch them. Reboot doesnt work, email wasnt loading before this issue so I reset now this.
My phone is not jailbroken and I have had no problems until now. I updated the firmware a few weeks ago with no problem. I noticed yesterday I wasnt getting all of my emails because I get some of the same emails on multiple accounts and they were not showing up. The refresh pinwheel just kept spinning but I did not think much of the problem because there is not good service in the building and plus I hava a number from the east coast but since I'm on the West coast I get subpar service comparred with the local number people, is this true? Anyways I got home and my email would still not ever finish loading so I turned the phone off but it wouldnt turn off. After 15 miniutes the shutdown pinwheel just kept spinning so then I did a hard reboot and it quickly shut down. I started it back and my email works now but none of the apps from the app store work.
Go to your App Store application and under the Featured section, scroll all the way to the bottom and tap on you account. Sign out of the account, then sign back in from the same section. Download a free application (any free app should do the trick) and that should make all of your apps work again.
Similar Messages
-
After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again?
no.
you need the update for a mac, not windows.
Product updates -
I recently update to the new ios 7 software on iphone 4. Now I have 2 app icons for facebook. Only one works and opens facebook. How do I get rid of the other? Tried deleting it out the old way but it has no "x" to take it out with?
okay never mind. I powered off and back on and the second not working icon is gone. So if anybody else has this same problem, give it a try
-
My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.
I am using wifi from a mobile by using the tethering option.Hi there amalrockzz,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Additional Information
Find information on connecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings for configuring your Wi-Fi router for use with iOS devices.
-Griff W. -
I changed my password on my iphone 5 but when i try typing it in it doesnt work what should I do?
I changed my password on my iphone 5 but when i try typing it in it doesnt work what should I do?
Put iPhone into Recovery Mode and Restore with current iTunes on computer. Open iTunes on computer, connecti iPhone to computer, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.
-
Hi Ive moved photos but they appear as duplicates in iPhoto. When you try and open them it says Photo can't be found. I have thousands. How do I get rid of these images?
Also I have many duplicate photos (from backups) It would be great to be able to remove all duplicates at one time, like in Itunes.
Can this be done?You moved what photos from where and to where?
Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management. -
Immediately on attempt to launch, Crash Reporter pops up.
Hey Guys,
I managed to fix this issue myself..I can access the home page as normal.
This is what fixed the issue.
Step 1 : Un-installed Oracle XE while logged in to the domain. ( Made sure it cleaned all installation files and registry and env variables by cross checking registry as mentioned here .
Step 2 : Logged in as admin on the local machine ( not domain ) and reinstalled it. Now it works just fine. (Closed all programs - didn’t open any programs..just ran Oracle installation )
I did install oracle xe logged in as a domain user before ( and my domain is user is part of local administrators) and it all worked just fine. May be it’s a permissions issue ( though I ran oracle installation as admin ) or host name change issue.
Phew..anyhow..finally it works!!
Cheers. -
All CS1 apps quit when I try to launch them.
Hello
I have been told by Adobe that they cannot provide any direct assistance to me. I have tried to explain to them that I don't believe I have a technical problem with the suite, as I think it may be a licensing issue. The problem I am having is that whenever I try to launch one of the CS1 apps, I get the following error message,
b "The application (...) CS quit unexpectedly. Mac OS X and other applications are not affected.
b Click Relaunch to launch the application again. Click Report to see more details or send a
b report to Apple."
My system is a Dual 2GHz PowerPC G5. I have 3.5GB of RAM. The Creative Suite is installed in the Applications Folder of my startup drive, which is the original 160GB drive. I also have installed a 1TB drive in the second internal bay. Firmware is up to date and I am running Mac OS X (10.5.6). I have had CS1 for about 5 years and it is registered in my name.
The problem started around the time that I downloaded a trial version of Illustrator CS4, about 1-2 months ago. I'm not necessarily linking the two together because I can't remember if I have successfully launched a CS1 app since installing Illustrator CS4. Around that time, I also repaired disk permissions in an attempt to sort out a problem I was having with the optical drive and I am fairly sure that I haven't been able to launch a CS1 app since then. Again, I don't know whether these could be related.
What I tried to explain to Adobe was that, I used to use 3 or 4 different user accounts on my Mac. I had one set up for graphics, one for music etc.. I have only installed CS1 on this computer but it occurred to me that by using the suite under different user accounts, it may have appeared that I had installed it on more than the allowed maximum of two computers. Also, I have more than once had to reinstall the operating system. At least once was an 'erase and install' and one an 'archive and install'. I wondered if this might also make it appear that I had installed the suite on more than two computers. I have since read somewhere that if you want to transfer your licence to someone else, you have to deactivate the serial number from preferences, which is something that I have never done.
Here is a list of what I have done to try and eliminate possible causes:
- relaunched the apps after the first failed launch, to launch them with their default preference sets.
- manually uninstalled the entire suite, including preference files, caches, fonts etc., as per the instructions given on the Adobe Support Website.
- reinstalled the suite
- repaired disk permissions
- deleted all printer and scanner drivers
- set up a second user account to verify that the apps will not launch from a different account
- booted in safe mode and tried to launch CS apps from there to eliminate issues with login
items or kext files
- disabled all non-system fonts and deleted any duplicates
- tried to launch the apps having removed all peripherals except mouse and keyboard
- reset PRAM and NVRAM
- run all open firmware and Mac OS X diagnostic tests to eliminate hardware issues
- completely reinstalled the operating system followed by a clean installation of the suite
None of these measures has solved the problem. If anyone could offer me any advice on this, I would be very grateful. Could it be a licencing issue and if so, what do I do about it? Adobe don't seem to want to know. Incidentally, Adobe Reader launches fine as does the trial version of InDesign CS4 that I've just downloaded.
If you have read this far, thank you for persevering.
Regards
Will MackieCS1 is not supported in Leopard if you had it working at some point you were lucky. Adobe does not plan on updating CS as it is an old version. Keep in mind that CS1 is now the last version that can be updated to CS4 now that Adobe has a 3 version update window. At the beginning of March Adobe will start tiered pricing and CS1 and CS2 will cost $200 more that you can upgrade to day. As soon as CS5 is released you will no longer be in the upgrade path and will need to pay full price for the CS5 creative suite.
If you want to continue to use Leopard then it would be best for you to upgrade to CS4. If you will never need to upgrade then it would be best to downgrade your system to Tiger by either restoring from a backup of Tiger you made before your system upgrade or wiping the drive and installing Tiger fresh. You can't Downgrade the Leopard with Tiger as you could with previous systems. -
I just opened up iTunes and my full music and film library was not visible. Only files that have a cloud icon next to them show up. How do I get full music and film access back again?
I never use iCloud and don;'t believe I ever set it up to operate on my system.Hello Stormjib,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes Library issues. Your iTunes media folder may have been move or modified, which would explain why you can only see media in the cloud:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I can see my images in the libarary as thumbnails but when i try to edit/email some of them become Exclamation Marks in a triangle.
What does the exclamation mark mean and how to i retrieve the photoThe exclamation make is an indication that iPhoto has broken the file path to the original photo.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Logic Express keeps crashing unexpectedly when i try to launch it
Hi, I have logic Express 7 installed on my iBook G3/500. I am running os X 10.4.11, with 640 MB of Ram and a 120 GB HD. It had worked fine under 10.4.0 and after i did a software combo update to 10.4.11 it would not open. Every time I open it I get the beach ball, followed by an error message saying Logic has unexpectedly quit. Ive tryed repairing permissions, trashing the prefs, and i get the same results. Ive tryed re-installing it, and it does nothing. Could it have somthing to do with me updating to 10.4.11? When I was running 10.4.0 it worked fine.
-AllenHi again CueBallMcDraw,
What operating system are you on? If your issue isn't related to your subscription being in a pending state (as I discussed in your other post), we'll look closer at what's going on with your system. But, I suspect you're going to be fine once your order finishes processing.
Please let us know how it goes.
Best,
Sara -
I used to safe appointments sent by mail easily in ical. Now, that I have updated the ical and use just the calenders on me.com I cannot integrate a request in ical and send a confirmation.
If you don't know the sender, then it is most likely a scam or spam email. I get them every day - I just delete them. I also get daily notices from Facebook or someone called Adriana at Facebook even though i do not have an account there. Can't do anything about it - just delete it.
-
How do I get DVD for the Windows 7 that should have come with my new laptop please
This is my first message here so please bear with me. I have just bought a new Lenovo Essentials B570 laptop which has come with Windows 7 pre-installed. Previously I used to buy Dell laptops which used to come with OS Re-installation DVDs which check to see if they are being installed on the hardware it was bought for but would allow us to install the OS on a new hard disk if the original one crashed. Now Lenovo seems to be using a very complicated method to allow buyer's to re-install the OS - they are expected to retain the same hard disk - but what happens is the hard disk crashes and one wants to install the OS along with all the drivers? The Dell DVD allows me to do precisely that. Can I create a similar disk to install the OS on a new hard disk as and when I want/need it please? I have created two sets of DVDs using the OKR software - one set using the 'system presently on disk' and another set for 'resetting to factory defaults' - but from what I have read on these forums these OKR disks would not work if I put a completely new hard disk. So at least if I can get hold of the correct version of the Windows DVD - as I have paid for the license I would be very grateful. Thank you.
Solved!
Go to Solution.yigit wrote:
http://forum.lenovo.com/t5/Lenovo-3000-and-Essential/How-to-create-quot-Factory-Default-Recovery-Dis...
Thanks for the quick reply.
But to me this looks more like a OKR solution and I have already created these Factory Reset discs.
Will these discs work if I have installed a completely new hard disk in the dive? Because that is what I would need to do in the rare event that I have a complete hard disk failure.
What is confusing is the fact that on these forums, I find many messages which indicate that the OKR solution would work only with the original hard disk and it would not work with a completely new hard disk and also that the OKR itself would not be able to change partitions on the hard disk - even when it is the original hard disk. To me this means any disks that are created using the OKR would be useless when the original hard disk has undergone severe change or a completely new hard disk is in its place. Correct me if I am wrong. (In fact I am hoping that I am wrong in that assumption.)
My laptop has a 750GB hard disk and it has Windows 7, 64bit. I actually want to make this into a dual boot machine with KUbuntu. What is stopping me attempting that is the fact that C drive has bigger partition and D drive is a smaller partition (too small in fact - 30GB these days is practically nothing) and I learn that any modifications I do to drive partitions would render the OKR non functional.
I can live without this simplistic one key rescue operation if I have recourse to the Windows 7 DVD and that is why I asked the question. -
When i try to launch premier pro, it says error and gives me the error code 1. what does this mean
and how do i fix it
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840 -
I need to know if i just downloaded itunes to my new computer and synced it with my ipod touch if all me songs would transfer over?
No, they won't transfer over, however, there are third party PC/Mac programs which will transfer the content of your iPod to your computer. Just do a Google search on this topic and you will find them (e.g. senuti)
Maybe you are looking for
-
How to work a 16:9 project part ll
Hi, I have this movie that was shoot on a 16:9 camera I worked Anamorphic on FCE on my canvas and my preview it's seens ok, no letterboxes nothing on the sides. Just alright. But when i import it on Idvd, i'm using a 16:9 projet, but my preview l hav
-
What is the system variables of document number in General Ledger PLD?
Dear all, Would anybody kindly tell me what is the system variables of document number in General Ledger Print Layout Designer? The default print layout use transaction number (system variables 272), however, my client wants document number to be dis
-
Please can some one lead me in the following text, on how to install oracle tool OPATCH? My question : After reading the below text, I download the zip file of the OPATCH tool, I unzip the file under oracle home. When unzipping the file, it created a
-
Mac Pro Freeze/Display glitch on start up
I've only been using my new Mac Pro (late 2013) for a few days now but am expereicing an issue on restart/start up. It seems the computer struggles to search for the two new 1920x1200 Dell displays that are hooked up to it through mini display-DVI co
-
PRINT IN BLACK ONLY OFFICEJET 4622
how do i get my officejet 4622 to print only w/black ink on a mac? thanks.