Only Primary NC code for Default NC Code

Hi All,
In SAP ME 5.2, In operation maintenance when browse for Default NC code i need only primary Nc code to be listed, here i am getting all the NC code.
Any specific setting needed for this filteration.
Any activity rules related with this filteration.
Regards,
rajiv

Okay thanks for your response...
In Rich POD, in LOG NC Reject plugin when i browse for the NC Code it displaying all the NC Codes irrespective of the NC Group assigned to the operation...
I am able to see all the NC Code from All the NC Groups...
How to solve this issue.. i want to see only the NC Codes belongs to the paticular NC Group in which i assigned the operation, only the selected NC Codes for the operation......
This is working fine when i am logging NC in Normal POD, For the operation only the assigned NC codes belongs to the particular NC Group is gettind displayed.
Any rules related for this setting or any specific configuration.....
Thanks,
Rajiv

Similar Messages

  • How to customize the code for default scroll buttons provided in the table?

    Hi Everyone,
    I want to customize the code for default 'next page' navigation button provided in a table. If this is possible then how it can be done?
    Thanks,
    Swati

    do you mean 'footer' of table, which used to scroll table contents?
    Table footer button is not editable.
    Instead you can try buttons in the table tool bar and can swap elements in the table.And also table footer can be set to showfootoer: false.
    refer thread: [Table Element Swapping|Re: Table with special requirement]
    nikhil

  • Is third-party SO/PO  process possible using only one company code?

    Hi friend,
    1) my client wants to implement third-party PO process but also wants a way of keeping track of inventory during this process. I know that inventory should be tracked on the vendor side and not on our client side since we're doing third-party PO.
    However my client wants to track inventory (in an inventory g/l account like 120100) so that when my client post a Goods Receipt, the inventory account
    gets Debited and when client post  the outgoing invoice to customer, the inventory account gets Credited. In this way, my client can track
    if the customer have received the ordered item or not.
    The problem is that third-party PO posts to consumption account but DOES NOT post to inventory account. Is there any way of
    setting this up so that in addition to posting to comsumption account every time a Goods Receipt occurs?
    2) i tried to create "Individual Purchase Order" (customer order from client -> client order from
    vendor -> vendor ships item to client -> client then ships item to customer) so that posting will hit inventory account.
    However, i find that taking this approach involves setting up a Plant for vendor (A), a Plant for our Client (B), and a Plant for Customer (C).
    Because when i do a Goods Receipt, the stock has move from Plant A to Plant B. Then when i do a Goods Issue to the customer, it asks for the receiving plant. I assume this means that the stock moves from Plant B to Plant C.  
    Also, from the reading i did on the forum, i get the impression that i need to create more than one Company Code if i were to do
    third-party PO.  Do the Vendors have to be created in a different company code then the Customer? Or does it mean that Just the
    plant (like Plant A) needs to be created in a different Company Code then Plant B and Plant C?
    3) can i do third-party PO using only ONE company code?
    Can anyone provide some clarification on this issue? I've read tons of posting but none really helped clear  this issue up.
    Thanks so much.

    Dear Kishore,
    Individual PO processing is not third party process at all. In third party process the vendor delivers the goods dirctly to the customer - please check what SAP help says.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/5601d4545a11d1a7020000e829fd11/content.htm
    Dear Queyen,
    One important point of third party process is that there's no need to keep stock of materials - that is in harmony with reality. Why does your customer want to keep stock from the goods if they doesn't receive at all? Is it coreect? It doesn't correspond to the fact.
    You can do statistical (ghost) GR against the third-party PO and you can see the goods movement in MB51 - I think this should be enough.
    http://help.sap.com/saphelp_46c/helpdata/en/dd/560287545a11d1a7020000e829fd11/frameset.htm
    BR
    Csaba

  • Interactive Form - How to make fields read-only through the code?

    Simple question but i can't seem to figure out how to do it. I have an interactive form that have editable fields. How do I toggle fields to make some of them read-only through the code. Please provide cold sample. thanks a lot.

    <b>Nagarajan Kumarappan:</b>
    I know how to do that but that's setting the value at design time. Mine has to be done at runtime(when the page loads) because there are a lot of condidtions determining which fields should be and should not be readonly. therefore I have to do in the code. Any by saying code I mean Java not java script or formcal.
    <b>kushagra mittal:</b>
    are you talking about regular webdynpro input fields? I am asking for that. I am talking about input fields inside my adobe interactive form embedded on the webdynpro page.
    I think what needs to be done is to disable context attributes like Nagarajan Kumarappan suggested but do that through Java which I don't see any tutorials show that.
    still looking for help.

  • Short cut assign all transactions code to a user, restrict only few tr code

    Hi,
    I know how to assign transaction code to user, and restrict transaction codes to the user through pfcg assigning role.
    If I want to assign all transaction codes to a user except say su01, and pfcg, then I have to write all the transaction codes to a profile assigned to the user except pfcg and su01, which is a tedious job.  Thus is there any way like in sap_all if I can exclude only those transaction codes which I want to exclude to a user. 
    No one would like to write down 1000 tr code assigned to a user. Is there a short and better way?
    Thanks
    syed

    Create a new role using PFCG go to the authorization tab and use the sap_all template and remove the authorizations for the transaction you don't want to assign.
    Thats it
    Regards
    Juan

  • Need to move data only by company code wise to another client

    Hi All,
    I need to move data from DEV client to one of PRD clients.
    There are two scenarios:
    1. The scenario is we have 3 company codes in DEV but need to move data of only 1 company code (that too customizing data).
    2. We want to move data, date wise also (i mean from 1 JAN to till date).
    Is there any possibility in SAP to do this?
    Thanks
    Disha

    "As I said above, production system should not be build from quality/development system in any way either by client copy or ALE or any other means."
    @Sunny
    Not necessarilly correct in all cases. Purely depends on what data is being discussed here. ALso depends on how Business processes have been defined. In lot of projects master data like GL Accounts,Cost Centers,Profit Centers etc is created in Development and ALE'D to production. You can also move a lot of data via transports (cutomizing). Depends on what data is being discussed. Transaction data ..yes you would never do that . But customzing and master data you can; provided you have fool proof processes in place and have a good understanding of how ALE works for the concerned data !
    Coming back to the question :
    Yes you can do it. Never do it for transactional data. A lot of garbage might have been created. Master data if you are really happy with the quality do it via ALE (but do it first on a test box) .  Make sure however that all the relevant customzing is in place.  Sequence is import. What got created in DEV first must go to prod first or else you would have errors which of course can be solved but then why take the pain. Involve your FI-CO guys and Business process owners before you do it. Be a bit careful with chart of accounts !
    As I said try it on a test environment first..
    And why are people suggesting to use TDMS when it was mentioned that only customzing data is involved! Why did SAP create CTS then if customzing has to be moved via TDMS !! Or is the old point frenzy back again !
    Regards.
    Ruchit Khushu

  • Msi motherboard 990FXA-GD80 wont work only sending debug code

    my motherboard 990FXA-GD80 is not booting to bios ore nothing is coming up to the screen it's only sending debug code:
    FF
    19
    FF
    2b
    3b
    37
    36
    70
    60
    72
    b2
    92
    99
    52
    54
    55
    56
    some times
    44
    45
    46
    why are nothing happening and what can it be
    i have tried out chaining slots for the memory card and to remove/mount the CPU and still it responds the same
    it's a FX-8120 CPU
    i have also tried with a
    is there someone that knows what can be wrong with the motherboard ples i need some help with this.

    FF - means nothing
    19 - Pre-memory South Bridge initialization is started
    FF - means nothing
    2B - Memory initialization. Serial Presence Detect (SPD) data reading
    3B - Post-Memory South Bridge initialization is started
    37 - Post-Memory North Bridge initialization is started
    36 - CPU post-memory initialization. System Management Mode (SMM) initialization
    70 - South Bridge DXE initialization is started
    60 - DXE Core is started
    72 - South Bridge devices initialization
    B2 - Legacy Option ROM Initialization <--- possible Graphics Card Problem too
    92 - PCI Bus initialization is started
    99 - Super IO Initialization
    52 - Memory initialization error. Invalid memory size or memory modules do not match
    54 - Unspecified memory initialization error
    55 - Memory not installed
    56 - Invalid CPU type or Speed
    the Red area is a very bad set of codes as they are mainly Memory and CPU issues
    your some times codes are all DXE IPL is started
    ok from that track of codes it looks to me like either a memory problem (MOST LIKELY) or CPU not Supported problem!
    ok so Read this>>>> >>Posting Guide<< and give us the parts in your Build and exactly what memory and CPU you have?
    also what is the Serial Number of your motherboard (Leave off the last 3 Digits if you do not want to give the full one)? ----- NOTE: its either on the rear of the board or on the UPC label on the Motherboard Box or both!

  • How to set only one Index-group for a Search-iView as default?

    Hi Everybody,
    i have a lot of index ID's for searching in different folders. Is it possible to set only one index-group as default for a search iView? Until now i get all groups as default in every search. It's inconvenient for the users to use the link of 'show options' in order to uncheck the other index ID's.
    regards,
    Seed
    Edited by: seed_mopo on Jun 6, 2008 5:02 PM

    hi Seed,
    To achieve this you have to follow the below steps
    1. Create a new set of search options, choose System Administration -> System Configuration -> Knowledge Management -> Content Management -> User Interface -> Search -> Search Options Set in the portal.
    In that you have a field 'Index Groups', wherein you can specify which index group, the user has to search in. If there are multiple index groups, mention your index groups separated by comma.
    See here for more information
    http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/content.htm
    2. You have to specify the option set that you created in step 1 in the default KM search iview. In the iview properties, under the field search option set, mention the option set that was created for this index group or multiple index groups.
    This way, you can configure KM search iview to search in a single index group or multiple index groups.
    Revert back in case of any queries
    Regards,
    Ganesh N

  • I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

    That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
    Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
    If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

  • How can we make the ms-word data as read-only using java code?

    How can we make the ms-word data as read-only using java code?

    MVSK wrote:
    By using java code i opened a file in ms-word. But the data i want to display as read-only. that means should not change it.I don't think you can do that. Display pdf documents instead.

  • I have an education version of cs 6 creative suite, I have the box and used in once on my old laptop I am now trying to find serial number to reuse on new laptop but only have product code and product number

    I have an education version of cs 6 creative suite, I have the box and used in once on my old laptop I am now trying to find serial number to reuse on new laptop but only have product code and product number

    Hi Sophie,
    Normally you can find your serial registered to your AdobeId. To find it please login to the Adobe website and check if you did register it to your account.
    Serial number, Redemption, and Product codes | Student & Teacher Editions
    In general you will go true a educational verification afterwards you get the serial. So its in your email or account. If you still have issues get in contact with the chat team to get help.
    Good luck!

  • Fbl5n: The printer provides me only one customer items for each page...

    Hi all,
    launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
    I'd like obtaining more customer items for each page...
    What to do?
    Thanks

    Hi Umberto..
    Thats how the standard report works..
    To meet your requirement, you would probably need to look at another standard report.
    In case you need further clarification, please feel free to write to me..
    Good Luck!
    Lucid-Mind...

  • Yahoo Email and Calendar will sync to my iPhone, but Contacts will not.  Selection for "Default Account" doesn't even show in the Contacts section within Settings on the iPhone.

    I have always had my Yahoo Email, Calendar and Contacts synched to my iPhone.  However, I noticed some Contacts weren't synching from the Yahoo account to my iPhone, so I thought if I just deleted the Yahoo account and added it back, I'd be fine.  That worked fine for my Email and Calendar, but now I have NO Contacts from Yahoo on my iPhone.  When I go to Settings, under Contacts, it doesn't even have the option for 'Default Account.'  Help!

    Hello Marsha,
    Thanks for using Apple Support Communities.
    It's not clear exactly what you're trying to accomplish here.  If you're wanting to set up SMS forwarding introduced in iOS 8, then please follow the directions below.  Also, your Apple ID should be an email address.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Take care,
    Alex H.

  • BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

    Hi,
    I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
    Please could anyone help me with this .
    Regards,
    Sushanth H.S.

    Hi!
    User Exits in Transportation
    In Transportation, there are enhancements that you can use with transaction CMOD.
    For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
    You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
    Business Add-Ins in the transports
    Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
    Customer-specific functions can be executed before the save time and after the database update.
    The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
    AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
    BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
    IN_UPDATE: BADI is called up after the database update.
    Standard Settings
    Creating a BADI method:
    Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
    On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
    Afterwards, go to the heading and activate the interface.
    Regards
    Tamá

  • Account Creation - Badi for Default values for BP Role and Sales Area

    Hi all,
    my requirement regards the possibility to create a new prospect (a link should be available in the navigation bar or create section).
    Logically, a bp role as "Prospect" and particoular sales area should be created automatically.
    I created an implementation for the BADI definition "BADI_CRM_BP_UIU_DEFAULTS". But don't know how to create the default values for BP role and Sales area:
    In my code
    assign cr_me->('VIEW') to <lv_view_name>.
      if sy-subrc ne 0.
        exit.
      endif.
      lv_viewname = <lv_view_name>.
      case lv_viewname.
        when 'AccountDetails.htm'.
    I obtain the viewname "AccountDetails" , the related context "Header". After I don't know how to proceed to obtain the related entities through the relationship BuilRolesRel and BuilSalesArrangementRel.
    Am I following the right way? Is there another solution to prepare the output for default values?
    Any kind of suggestion will be appreciated.
    Regards, Roberto

    go to spro>cross-application components>sap busines partner>business partner> basic settings>field groupings>Configure Field Attributes per BP Role
    Double click the business role which you want to customaze (e.g. 'A') and change the proper settings.
    Regards.

Maybe you are looking for