Only require data back up from lost blackberry curve
hi..
i lost my blackberry curve 8520 yesterday and its protective appplication is not on.i know that i cant get it but only i want is my contacts.please help me as these is very much important.
Details of phone are:
blackberry curve 8520eta00108/2009/wrloimei no.<removed>
pin number:
<removed>
please do the needful
current contact number <removed>
EDIT: Personal Information such as PIN & Phone # is prohibited for your security. Please review User Guidelines under section "Be careful."
Hello sanskrit_singh
If you don't have a backup of your device or not using BlackBerry Protect and any email to sync your contacts then How and from Where you going to get your Device Data !
In this situation , I am sorry to say but your data are gone with your lost device.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Similar Messages
-
Cannot Delete SMS Text Message From My Blackberry Curve -
I cannot delete a SMS text message from my Blackberry Curve. What are some options I can try that would remove the text message?
you already reset the device taking out the battery? if yes View your Saved Messages folder and see if it is also there
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved. -
How i can get only required data from table by using CKM
Hi...
i have done one scenerio i.e get required data from one table into another table on basis of some condition by using CKM.
Now i want same,but this time my target is file ,not RDBMS.
so plz tell me procedure how i can get required data from source table into File on basis of some condition using CKM.
thanksCKM checks for Constraints and Not Null condition. You can use IKM SQL to File and being that there is no option in IKM for CKM .
The other method is you can declare those Not null and other condition as Filter in the Source Datastore, that should filter out records that you are not willing to move to files. -
Data back up from Single User Mode
Hello,
I have a problem with my 700 MHz iBook, dual USB, with OS X 10.3.9.
Unfortunately the OS doesn't start up because of "overlapped extent allocation" problem...
I would like to re-install the complete OS but before doing it, I would like to back up some directories.
Is it possible to save some data, by connecting an Ipod or some sort of external peripheral, from the Single User mode?
If yes, how can I do it?
Thank you in advance from your kind support.Before giving up the ghost check out these:
http://docs.info.apple.com/article.html?artnum=25770.
Manually fix Overlapped Extent Allocation Errors without Disk Warrior
Overlapped overlapped extent allocation errors can be the bane of any Mac user's existence. Often, these errors go unnoticed until the problem becomes visible: your Mac might refuse to boot, crash unexpected, or worse, critical data might disappear from the Finder. Disk Utility can detect, but not fix overlapped extent allocation errors, and certain third-party utilities, such as Alsoft Diskwarrior, can fix them, but generally without reporting the consequences.
Overlapped extent allocation error occur when the file system thinks that two files are occupying the same area on the hard disk, hence overlapping on the same "inode," which is the structure which holds the location of the data blocks the file occupies, and also file permissions and flags.
Clearing the "overlapped" or "overallocated" extent allocation essentially means that you'll have to lose some data, because the only way to remove the overlap is to delete the file that's occupying the inode. So, if you suspect, or find out, that the guilty file is a critical system file that resides in one of the hidden system directories such as /etc /var /usr/ or visible system directories such as /System or /Library, and you don't want to reinstall the whole OS (which might not fix the overlapped extent allocation anyway), it's good to have another disk available to copy the files back to your original disk if necessary: a second bootable hard drive or a firewire drive connected to your Mac when you remove the misbehaving file. Just make sure that when you copy the file back to your boot disk that the permissions are correct, so it's best to use the "ditto" command, so that all sticky bits, flags, and permissions are preserved.
In case you didn't know, you don't have to boot from an install CD in order to check for overlapped extent allocations. All you need to do is restart your Mac, while holding down command + S to boot in "single-user mode."
At the command prompt that appears, type:
$ fsck -fy
If you have an overlapped extent allocation, you'll see:
"Overlapped Extent Allocation" (File 123456d)
No matter how many times you run fsck -fy, you'll never be rid of the error.
So, simply issue the following command:
find / -inum 123456 -print
Note the "d" was dropped, or any extra letter that appears after the inode number.
The find will return a file name that matches with the inode number, and the path to that file. If you remove the file then the fsck will not return this error next time you run it.
However, before you can delete the file(s) in single-user mode, you'll need to mount the file system. Type:
$ mount -uw /
When done, issue the "sync" command, and that will flush the write cache so that all pending writes are written from memory to the disk. Also, since most OS X 10.3 Macs use the HFS+ Journaled file system, it might be a good idea to disable the journal before booting into single-user mode by typing:
$ sudo diskutil disableJournal /
then re-enable it when done fixing the overlapped extents and rebooting normally:
$ sudo diskutil enableJournal /
Chris Anderson is a long-time Linux propellerhead who just got his first Mac, an ibook G4, and can't keep his hands off of it. He currently works as a "The Architect" and general visionary for a maker of world-class collectibles.
If you own Disk Warrior then it should be able to repair a drive with overlapped extents.
There are two backup utilities included in Unix - psync and rsync. You will find them in the /usr/bin/ directory. For documentation simply enter: man psync or man rsync. In order to write data while in single-user mode you need to issue the command: /sbin/mount/ -uw / (Note: there is a "space" between the "uw" and the "/".) To mount an external drive you will need to provide the mountpoint for it in place of the "/", e.g., "/Volumes/volname") without the quotes. -
Remove all information completely from a Blackberry Curve 8520?
my relative upgraded her phone and gave the phone to me. I'm getting rid of all information. But the email address is still on the phone.
Is there a way to reset the entire phone so everything is gone?
Also what does the 4 side buttons do?
Thanks.You may also want to check with the person you got the device from to make sure they have removed the PIN number from their BlackBerry Internet Service account. If they did not then you may still end up with the email address on the device and you may not be able to add your own email addresses.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
How do I transfer video from my blackberry curve to my desktop
I recently recorded some video on my blacberry cure, and would like to know how to transfer the video to my desktop so I can email it to friends and family. Thanks again.
well you ahve several options
1. email them to your friends and family from the blackberry
2. email them to yourself from the blackberry then email them from friends and family from the PC
3. turn on mass storage mode(if you have a media card), plug into PC and open windows explorer, access the blackberry and copy the files over to PC
4. install DTM and copy files form blackberry to PC -
Syncing contacts from a Blackberry Curve 8330 to iPhone 4
I currently have an Blackberry Curve 8330 and want to transfer my contacts to my new iPhone 4. The Blackberry I have does not support Verizon Wireless’ Backup Assistant. I used Blackberry Desktop software on my Mac and did a backup/synced my phone with the application. What do I do next to get my contacts onto the iPhone?
http://discussions.apple.com/thread.jspa?threadID=2747729&tstart=0
-
i know longer have my blackberry but the new owner is continuing to receive my personal text messages from my contacts list. i do not have any bbm account and there is no data on the phone. only wifi . please help me stop this from happening. i dont know the imei of the blackberry. im very scared. they are usuing my personal information against me.
Hi and Welcome to the Community!
Refer:
Article ID: KB05099 Steps to take before selling or after buying a previously owned BlackBerry smartphone
All of those Seller steps, of course, should be done before the device is delivered to the buyer. After that point, there is nothing you can do, unless you happened (still before) to have installed BB Protect onto the device, in which case you could use the tools it has to perhaps wipe it now.
All in all, this is a difficult lesson for you to learn...giving away personal information is something that no one should ever do, and yet exactly what you did do.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Recovering data backed up from a diferent computer
I have been running a X200 for over a year now, backing up using Rescue & Recovery to a external USB drive.
2 Weeks ago my system crashed.
I had another X200 of the same configuration sitting in storage.
I got it up ang going with the same OS as the one that failed.
All I want to do is recover a few files from the backup usb drive but R&R doesn't dsee the backup.
How do I get at the drive to recover my data?
GeraldHi swimstc, and a warm welcome to the forums!
I'd get EasyFind...
http://www.macupdate.com/info.php/id/11076
Search that drive for addressbook, folders only, that should get you to something like...
/Users/YourUserName/Library/Application Support/AddressBook
If perchance they could n't recover the folder, but just the files, her's the list of what is in mine...
LastImport.plist
Images
AddressBook.data.previous
AddressBook.data.beforesave
AddressBook.data
ABPerson.skIndexInverted
ABPerson.skIndex
.skIndex.ABPerson.lockN
.import.lockN
.database.lockN
You could search for Files only of those names.
AddressBook.data is the biggie. -
I want to get data from iCloud on my new 3GS . But while setting up I used data from iPhone 5 . How to revert back? I want to get rid of back up of iPhone 5 on my new 3GS and want back up of old 3GS on new one.
Assuming you do have an icloud backup for the old 3GS, then on the new one -
Go to Settings>General>Reset and tap Erase All Content and Settings. This will erase your device. Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US -
Selecting from Multiple Tables but requiring data to match from a 3rd table
Hello Everyone,
I'm having alot of trouble with this select
I have three tables:
prod_poured, conc_test, and cyl_breakTo put together my report, I need to grab this data:
cyl_break.pour_no "Pour Number", cyl_break.cyl_id "Cylinder ID", cyl_break.pour_d "Pour Date", conc_test.mix "Mix #", conc_test.amb_t "Ambient Temperature", conc_test.conc_t "Concrete Temperature", conc_test.air "Air %", cyl_break.break_d "Break Date", cyl_break.age "Age (Days)", cyl_break.spec_str "Specified Strength", cyl_break.str "Specimen Strength"and I need it to grab all data in those two tables when one column in the prod_poured table meets a certain condition
This is what I have so far:
select cyl_break.pour_no "Pour Number", cyl_break.cyl_id "Cylinder ID", cyl_break.pour_d "Pour Date", conc_test.mix "Mix #", conc_test.amb_t "Ambient Temperature", conc_test.conc_t "Concrete Temperature", conc_test.air "Air %", cyl_break.break_d "Break Date", cyl_break.age "Age (Days)", cyl_break.spec_str "Specified Strength", cyl_break.str "Specimen Strength"
from conc_test inner join cyl_break on conc_test.pour_no = cyl_break.pour_no, prod_poured
where conc_test.pour_no = prod_poured.test_id and prod_poured.job_no = '9-12-821';It gives me the right results but wayyy too many of them so obviously I've got something wrong.
the results it gives are this:
Pour Number Cylinder ID Pour Date Mix # Ambient Temperature Concrete Temperature Air % Break Date Age (Days) Specified Strength Specimen Strength
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100324A 100324A3 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 51.9
100324A 100324A3 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 51.9
100324A 100324A3 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 51.9
100324A 100324A3 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 51.9
100324A 100324A4 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 50.8
100324A 100324A4 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 50.8
100324A 100324A4 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 50.8
100324A 100324A4 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 50.8
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49
100324E 100324E3 24-MAR-10 10 10 15 6 21-APR-10 28 35 50.7
100324E 100324E3 24-MAR-10 10 10 15 6 21-APR-10 28 35 50.7
100324E 100324E3 24-MAR-10 10 10 15 6 21-APR-10 28 35 50.7
100324E 100324E3 24-MAR-10 10 10 15 6 21-APR-10 28 35 50.7
100324E 100324E3 24-MAR-10 10 10 15 6 21-APR-10 28 35 50.7
100324E 100324E4 24-MAR-10 10 10 15 6 21-APR-10 28 35 51.6
100324E 100324E4 24-MAR-10 10 10 15 6 21-APR-10 28 35 51.6
100324E 100324E4 24-MAR-10 10 10 15 6 21-APR-10 28 35 51.6
100324E 100324E4 24-MAR-10 10 10 15 6 21-APR-10 28 35 51.6
100324E 100324E4 24-MAR-10 10 10 15 6 21-APR-10 28 35 51.6The results I need it to give are this:
100322A 100322A3 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.6
100322A 100322A4 22-MAR-10 10 16 16 4.2 19-APR-10 28 35 50.4
100324A 100324A3 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 51.9
100324A 100324A4 24-MAR-10 10 9 15 5.8 21-APR-10 28 35 50.8
100324E 100324E3 24-MAR-10 10 10 15 6 21-APR-10 28 35 50.7
100324E 100324E4 24-MAR-10 10 10 15 6 21-APR-10 28 35 51.6
100326B 100326B3 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 48.3
100326B 100326B4 26-MAR-10 10 9 15 5.7 23-APR-10 28 35 49As you can see my query provides the right results, just way too many of them. I only need to have one result per cylinder id.
I can't seem to wrap my mind around this one and if somebody could put together a proper select based on what I need that would be extremely helpful. If you need any more data to provide help just ask and I'll paste it.
Thanks,
dtr
Edited by: dtr on Apr 26, 2010 11:12 AMdtr wrote:
Hi,
Here are the create table statements:
create table conc_test
(p_date date, job_no varchar, mix varchar, pour_no varchar, amb_t varchar, conc_t varchar, slump varchar, air varchar, density varchar, cyl_cast_time timestamp)
create table cyl_break
(job_no varchar, pour_no varchar, cyl_id varchar, pour_d varchar, break_d varchar, age varchar, spec_str varchar, str varchar, mix);
create table prod_poured
(prod_id varchar, pour_id varchar, test_id varchar);
Great!
Don't forget to post the INSERT statements, and the output from that data (if it is different from what you posted in your first message).
Basically I need to pull the data I showed above out of conc_test and cyl_break, but only data that has the proper job_number which is retrieved from the prod_poured table. The prod_poured test_id for everything that has the proper prod_poured job_no So an IN-subquery, like Sudhakar and I suggested, should work.
What was the problem when you tried them? Post the query you ran, even if you just copied and pasted it from this thread: there may have be an editing error.
prod_poured test_id is the same thing as conc_test pour_no and cyl_break pour_noExactly! But that doesn't answer the question: Is that value unique in all the tables? If not, in which tables can it be duplicated? -
How to recover information from my blackberry curve 8330
The scroll pad has frozen up on my phone. I took it back to Verizon. People at the store could not fix but I do have insurance so they are sending me a replacement phone. How can I recover my pictures, documents, note pad info and other information from this phone before I send it back after getting my new replacement? Thanks
I think if U take your new phone & olD phone to a vErizon store & ask 4 mgr. He may b able 2 rEstore, good luck & GOD BLESS
Sent from my Verizon Wireless BlackBerry -
Has any one tried to bluetooth pics or audio from a Blackberry Curve 8330?
My blackberry found the Palm Pre when searching for bluetooth devices and so did the Palm Pre but the blackberry and palm connections failed!!!!! Help anyone please!!!!!!!
Post relates to: Pre p100eww (Sprint)I'm new. Same bluetooth problem. Will not pair with my 2010 VW GTI w NAV system, or my MacBook Pro 17" (just discovered the MacB prob.)
When I initially discovered the problem I went to an Apple Store. Genius was excellent but requested that I check with VW. VW people were very helpful. A mechanic had an iphone 4s. He came out to the car ... He could not pair my phone but he could pair his phone ... So, it's the iphone ... Back to the Apple Store ... the genius was really good. He replaced the iphone. Great ! So, back out to the car & it would not pair, still. So ... can't be the phone , right. Back to VW. The Audi manager had an iphone 4S. He paired his phone with my car. He could not pair my phone to my car. He tries my phone in a new 2011 GTI sitting on the lot ... my phone pairs with it just fine. So ... it's my car. So ... make an appointment to get the bluetooth module replaced. They replace the Bluetooth module. My iphone will not pair. They end up pairing 2 different iphone 4S to my car ... but not my iphone 4S. My iphone 4S will also not pair with another 2010 GTI they have in for service. Though the 2 iphone 4S
pair with the second GTI just fine. They even try pairing my iphone with a brand new 2012 GTI in the showroom ... yep ... it paired fine. So ... ????????????????
They are going to update my nav software next (tomorrow), Hopeful ??? not really ... Will be taking my computer to Apple Store next ... maybe if they can discover why it will not pair to my MacBook Pro it will lead to a solution for the GTI ??? I'll get back to you. -
Transferring apps from blackberry curve to iphone
my son bought me a new iphone and I was wondering if there was a way I can transfer software programs from the blackberry curve to the iphone?
Solved!
Go to Solution.As the two operating systems of the devices are completely different, it is unlikely any of th applications will transfer.
For the contacts, sync your BB to your desktop, such as Outlook using Desktop Manager, and then sync the iPhone to your Outlook. I guess the iPhone will sync to Outlook, you'll have to get details on that probably in a iPhone forum somewhere. Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
WO basic start date - requirement date
Good morning folks,
Would anyone be able to shed some light on any config that would be suitable for the following:
The materials are assigned to a task list that is then assigned to a plan. That plan is then scheduled and the work orders are generated.
When the materials are added to the work order their requirement date is automatically assigned as the work order basic start date - can this requirement date be pulled from the scheduled dates instead?
The problem is that the material may not be required at the beginning of the WO, so the defaulted basic start date of the WO would not be the way forward.
Thanks
Mantashi Mantas
you can set in scheduling parameters with following possibilities
<b>Path Plant maintenance and customer service->Maintenance and service order->scheduling->set scheduling parameter</b>
1)The basic dates are adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
2)The basic dates are not adjusted and the dependent requirements are scheduled for the start dates of the relevant operations.
3)The basic dates are adjusted and the dependent requirements are scheduled for the order basic start date.
4)The basic dates are not adjusted and the dependent requirements are scheduled for the order basic start date.
so when you add the components you have to assign the operations,after selecting the operation you can change the operation date, after you change the operation dates,the material scheduled dates will be changed to the operation date
(using the option <b>1</b>)
regards
thyagarajan
Maybe you are looking for
-
Make a 1-Click short cut for Adobe Acrobat 9 Pro specific function
How can I make a 1-Click short cut for Adobe Acrobat 9 Pro for the function "Create" > "PDF from Scanner" > "Black & White Document"?
-
Hi Experts I ahve question where the payment terms at the header and the in the invoice had been diffrent in the document flow pleasec can u advise what could be the reasons in diffrering I have ine at the order and diffrent in Invoice. Thanks
-
Some questions related to SAP XI
Hello! I would like to know the answers for the following questions regarding SAP XI-context (if it possible with Yes/No and a short comment/explanation) <b>CAPACITY PLANNING GUIDELINES</b> a) Guidelines to size the server(s)? b) Guidelines for sizin
-
Error in endeca search module-bulk load error
i have added product-catalog-output-config.xml and category-dim-output-config.xml to my project in respective paths as in DCS...the XMLs are combining when i see them in dyn/admin. but while running baseline index, pre-indexing is getting succeeded b
-
Toplink on existing application
Hi we are trying to use toplink for an existing j2ee application. The existing application uses dao approach (we have plain java object model and whenever we want to persist an object, we call its corresponding dao).Each dao has an insert,update meth