Only return data from "First Occurrence" of a record?

Post Author: cmainard
CA Forum: Formula
I have a table with per customer, multiple rows.
For example:
nameadd
Family
famorder
Portfolio Name Three
famsalu
sperling_dale
1
814308-3 and 618887-4
Mr. and Mrs. Dale R. Sperling
sperling_dale
2
4724042
Mr and Mrs Dale R Sperling
sperling_dale
3
4734415
Mr and Mrs Dale R Sperling
sperling_dale
4
4734416
Mr and Mrs Dale R Sperling
sperling_dale
5
4724052
Mr and Mrs Dale R Sperling
I would like to ONLY return the field "famsalu" where field "famordr" = 1
Note that the punctuation is correct in the first record, but not in the others. I still report on the other rows, but when returning "famsalu" can I make it Always be from where famorder = 1 ?
Thanks!

Post Author: V361
CA Forum: Formula
You can use the select statement, right click on your famorder field, select the select expert, your select may look like this = "1"

Similar Messages

How configure a primavera web service to return data from the second database?

Hi everyone,
We have P6 with first WS deployed on a single server weblogic domain. The first WS return data from the first database instance.
Then deployed advanced second WS on a separate weblogic domain server with a different port. Configured second WS with <WS2_INSTALL_HOME>/bin/dbconfig.sh, creating a new branch of a configuration that specifies a different second instance of the database. However, this configuration is ignored and second web services return data from the first database.
We have one domain, which including next servers:
Name / Host / Port / Deployments
P6 / localhost / 0001 / P6(v8.3), p6ws1(v8.3)
p6ws2 / localhost / 0002 / p6ws2(v8.3)
Now we have two different file BREBootstrap.xml.
P6 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db1:1521:db1</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass1</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB1" instances="1" logDir="anydir/P6EPPM/p6/PrimaveraLogs"/>
</Configurations>
p6ws2 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db2:1521:db2</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass2</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB2" instances="1" logDir="anydir/P6EPPM/ws2/PrimaveraLogs"/>
</Configurations>
‘P6 Config_DB1’ and ‘P6 Config_DB2’ including Database property for 1 and 2 database respectively.
How to configure a second web service to return data from the second database?
Thanks in advance!
Regards,
Dmitry

OK, so I got this to work this morning with Username Token Profile (with little help from Oracle Support).
I followed your steps 1-4 but in step 2 I didn't add the -Ddatabase.instance=2 because I want to check to see if my code could swap between different instances.
It appears for Username Token Profile to use Database Instance, you need to set it in the soap header.
So my soap request looks like this:
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <s:Header>
        <DatabaseInstanceId xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Authentication/V1">2</DatabaseInstanceId>
        <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
            <u:Timestamp xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3'>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
                <u:Expires>2014-10-23T04:29:01.152Z</u:Expires>
            </u:Timestamp>
            <o:UsernameToken u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3' xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'>
                <o:Username>admin</o:Username>
                <o:Password Type='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText'>password</o:Password>
                <o:Nonce EncodingType='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary'>vJBQhCc28bAeszej7gOaiC2tVCQ=</o:Nonce>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
            </o:UsernameToken>
        </o:Security>
    </s:Header>
    <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
        <ReadProjects xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Project/V2">
            <Field>ObjectId</Field>
            <Field>Id</Field>
            <Field>Name</Field>
            <Field>Status</Field>
            <Field>StartDate</Field>
            <Field>FinishDate</Field>
            <Field>DataDate</Field>
            <Filter>Id = 'EC00515'</Filter>
        </ReadProjects>
    </s:Body>
</s:Envelope>
This request pulled the project from the second instance.
V/r,
Gene

BDT *TFKB_Collect FM to return data from PAI

Hi Experts, hope you are going great.
I am working on adding a couple of z fields in table TFKB, and letting users modify them thru tcode FM_FUNCTION. I have added them to the table, and am wanting to edit/update them thru tcode FM_FUNCTION. I was able to add z fields on the FM_FUNCTION through BDT (App Object FMFA in TCode BUS0). However, the issue I ran into is that there is no standard *TFKB_COLLECT function to pass zfield changes from my my z PAI Function Module. The BDT guide says that the *tablename_Collect should be used to return data from Z PAI. I am curious as to why SAP left out this module, and what are the options I have to return zfields back to SAP. No FM under Function Group FM_FUNCTIONAL_AREA seem be doing this either. We are running ECC 6.0.
(The "Get" module is available, but with a name different than the naming convention - "FMFA_DI_READ_DATA".)
Thanks.

The below mentioned code was answered by one of the members. I am copy pasting this here as i am not aware of how to attach other threads.
use the below code to get spool data into internal table.
data: begin of itab occurs,
data(2000),
end of itab.
SUBMIT rspolst2 EXPORTING LIST TO MEMORY AND RETURN
WITH rqident = 'spool number'
WITH first = '1'
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = mem_tab (table LIKE TABLE OF abaplist.)
IF NOT mem_tab[] IS INITIAL.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
List_index = -1
TABLES
listasci = itab
listobject = mem_tab (LIKE TABLE OF abaplist)
endif.
by the above code you can get the data into internal table itab.

Return data from all columns apart from a certain data type.

Bit stuck on something, hope somebody here can help:
I want to do a 'select * from ' a table, to return all columns except ones of a certain datatype. ie. I want to return data from all columns, excluding columns of datatype 'SDO_GEOMETRY'.
This gives me the list of columns:
SELECT COLUMN_NAME
FROM   USER_TAB_COLUMNS
WHERE TABLE_NAME = 'ORDER_ITEM'
AND   DATA_TYPE <> 'SDO_GEOMETRY'; But I can't seem to take it any further...
Now if I knew the columns beforehand, then of course I could just list them, excluding the geometry column, but this is to be used for a plug-in for MS Word, where a user can pick database columns to dynamically fill a report from - but I don't want the geometry columns as these can't be handled in this way.

Hi Reggie,
> connects to the database and presents a list of tables
My guess is that this macro is written so it selects from all_tab_cols.
Change that plugin and let it select from a view like the one above. That way, the users won't be able to see/pick anything that you are not able/willing to present for them.
Edit:
You could even tease your users, and let them see the columns, but not being able to pick them.
create or replace view available_tab_columns
as
   select decode(pickable.data_type, null, 0, 1) pickable
         ,atc.* -- narrow down yourself
     from all_tab_cols atc -- or maybe user_tab_cols
         ,(select 'CHAR' data_type from dual union all
           select 'DATE' from dual union all
        select 'NUMBER' from dual
           -- complete positive list, yourself
          ) pickable
    where atc.data_type = pickable.data_type(+);Regards
Peter
Message was edited by:
Peter Gjelstrup

How to only migrate data from SQL Server 2008 to Oracle 11?

According to our requirement, We need to only migrate data from a SQL Server database to an existed
Oracle database user.
1) I tried to do it with SQL Developer 3.0.04 Migration Wizard, But find an issue.
My SQL Server database name is SCDS41P2, and my Oracle database user name is CDS41P2;
When I used SQL Developer to do offline move data by Migration Wizard, I found all oracle user
name in movedata files which gotten by run Migration Wizard
is dbo_SCDS41P2. If the Oracle user name is not the same as my existed Oracle user name,
the data can't be moved to my existed Oracle user when I run oracle_ctl.bat in command line window.
So I had to modify the Oracle user name in all movedata files, but it's difficult to modify them because there are many tables in
databases. So could you please tell me how to get the movedata files which the oracle user name in them is my
expected Oracle user name?
2) I also tried to use the 'copy to Oracle' function to copy the SQL Server database tables data
to the existed Oracle database user. When clicked 'copy to Oracle', I selected 'Include Data' and 'Replace' option
But I found some tables can't be copied, the error info is as below:
Table SPSSCMOR_CONTROLTABLE Failed. Message: ORA-00955: name is already used by an existing object
Could you please tell me how to deal with this kind of error?
Thanks!
Edited by: 870587 on Jul 6, 2011 2:57 AM

Hi,
Thanks for you replying. But the 'copy to oracle' function still can't be work well. I will give some info about the table. I also search 'SPSSCMOR_CONTROLTABLE' in the target schema, and only find one object. So why say 'name is already used by an existing object'? Could you please give me some advice? Thanks!
What is the 'Build' version of your SQL*Developer ?
[Answer]:
3.0.04
- what does describe show for the SPSSCMOR_CONTROLTABLE in SQL*Server ?
[Answer]:
USE [SCDS41P2]
GO
/****** Object: Table [dbo].[SPSSCMOR_CONTROLTABLE] Script Date: 07/18/2011 01:25:05 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SPSSCMOR_CONTROLTABLE](
     [tablename] [nvarchar](128) NOT NULL,
PRIMARY KEY CLUSTERED
     [tablename] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
- what does describe show for the SPSSCMOR_CONTROLTABLE in Oracle ?
[Answer]:
-- File created - Monday-July-18-2011
-- DDL for Table SPSSCMOR_CONTROLTABLE
CREATE TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE"
(     "TABLENAME" NVARCHAR2(128)
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- DDL for Index SYS_C009547
CREATE UNIQUE INDEX "CDS41P2"."SYS_C009547" ON "CDS41P2"."SPSSCMOR_CONTROLTABLE" ("TABLENAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- Constraints for Table SPSSCMOR_CONTROLTABLE
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" MODIFY ("TABLENAME" NOT NULL ENABLE);
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" ADD PRIMARY KEY ("TABLENAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE;
Edited by: 870587 on Jul 18, 2011 1:42 AM

The ways to return data from a stored procedure.

Hi, I know there are three ways to pass out a value from a Microsoft SQL stored procedure, but I have no clear idea what Oracle SP can do, I know Oracle doesn't support multi-recordset(v8), can not return a recordset by a inner select query, but I do know there is a cursor object, which doesn't like its counterpart in Microsoft SQL server, is a choice under most situation. Here I wonder anyone who is good at Oracle can give a list of all ways to return data from a SP, including example is more better, thanks.

Here is a way to get return a record from a function and a procedure. You need to be familiar with Oracle packages as well as stored procedures and functions:
CREATE OR REPLACE PACKAGE EmpPkg AS
cursor cEmp(pEmpno in number) is
select empno, ename, job, hiredate, sal
from emp
where empno = pEmpno;
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype);
END;
CREATE OR REPLACE PACKAGE BODY EmpPkg AS
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype IS
rEmp cEmp%rowtype;
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into rEmp;
close cEmp;
return rEmp;
END;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype) IS
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into prEmp;
close cEmp;
END;
END;
Here's how you use the package:
DECLARE
rEmp EmpPkg.cEmp%rowtype;
BEGIN
rEmp := EmpPkg.GetEmployee(7782);
dbms_output.put_line(rEmp.ename);
EmpPkg.GetEmployee(7902, rEmp);
dbms_output.put_line(rEmp.ename);
END;
Note that you can return any Oracle data type from a function. Likewise, you can specify any Oracle data type as an out parameter in a procedure. Also, you can make a parameter both an in and an out datatype like this:
PROCEDURE GetEmployee(pnEmpNo in out number);
I hope this puts you in the right direction.
null

Return data from spark list itemrenderer

Does anybody no how to return data from the itemrender for a spark list. say i had a checkbx in my itemrenderer how can I get that info back to my main component if its selected or not. I looked at datagrid and itemeditor but I really rather use a spark list. Thanks

thanks I also found another way to doing it. A click handler on my list when that fires I can check if checkbx has been selected by doing event.target.document.mycheckBx.selected this will not work if using currentTarget cause it take the info from the itemRenderer. Now I understand the difference between currentTarget and target.
not sure if this is a better way to access the data I think I might still just dispatch a event and do it your way.
Its weird that mx:list has a editItemRenderer and s:list does not
thanks again TK

I want to return data from TreeMap in order from DB

i want to return data from treemap in the order from the db... but it returns it in alphabetical order...

You do realise of course that a TreeMap is a SORTED Map.
It will sort whatever you put into it as you put items into it.
If you don't want the items sorted, don't use a TreeMap.
As suggested, a LinkedHashMap gives you the best of both worlds
I often use a LinkedHashMap, indexed by primary key id, but ordered by something else (name for instance)
- Retains insertion order (by default) for iteration
- Provides the quick access of the Map - by id

Returning data from child jdialog...problem

Hello
I have a parent form which calls a jdialog. I need to return data from the jdialog.
So i have this class which contains the varaibles i want to set.
public class ProtocolRecordType {
public int num;
public String name;
I from my main i call this class and method. Now i seem to be able to set object values to try and do a pass by reference in teh constructor, but if i use the same variable in a method it says unresolved symbol. Most of the code was generated with netbeans ide.
Can anybody explain this to me ?
Thanks
public class ProtocolsDialog extends javax.swing.JDialog {
/ Creates new form ProtocolsDialog */
public ProtocolsDialog(java.awt.Frame parent, boolean modal, ProtocolRecordType protocol ) {
super(parent, modal);
initComponents();
System.out.println("done constructor");
// public int y=0;
protocol.name="protoname"; <==========setting it here works, i can print this out when it returns to parent frame.
private void Protocol1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
//protocol.name="aaaa";
// ProtocolRecordType.name="";
System.out.println("proto1 selected");
protocol.name=("xxxtest"); +<=================this says cannot find symbol protocol.name+
}

Check out tjacobs.ui.dialogs.ParamDialog and tjacobs.ui.ex.SetupPane in TUS for two easy ways to do this

Return data from Java servlet in form of JSON encoded parameters in Javascr

How to return data from Java servlet in form of JSON encoded parameters in Javascript handler function call?
The same is implemented in php as the following
echo "sT.handleAjaxResponse(";
echo json_encode($response);
echo ");";
How to do the same in Java servlet?
Thanks.

With the rising popularity of JSON (especially with Ajax), support for it has started to appear in the Java community. I am not aware of any standardized approach yet, but expect it is likely we'll see that eventually. For now, you probably want to look at a third-party library such as the [JSON in Java Library|http://www.json.org/java/], Jettison, or [Java Tools for the JSON Format|http://jsontools.berlios.de/].

Select max date from a table with multiple records

I need help writing an SQL to select max date from a table with multiple records.
Here's the scenario. There are multiple SA_IDs repeated with various EFFDT (dates). I want to retrieve the most recent effective date so that the SA_ID is unique. Looks simple, but I can't figure this out. Please help.
SA_ID CHAR_TYPE_CD EFFDT CHAR_VAL
0000651005 BASE 15-AUG-07 YES
0000651005 BASE 13-NOV-09 NO
0010973671 BASE 20-MAR-08 YES
0010973671 BASE 18-JUN-10 NO

Hi,
Welcome to the forum!
Whenever you have a question, post a little sample data in a form that people can use to re-create the problem and test their ideas.
For example:
CREATE TABLE     table_x
(     sa_id          NUMBER (10)
,     char_type     VARCHAR2 (10)
,     effdt          DATE
,     char_val     VARCHAR2 (10)
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0000651005, 'BASE',    TO_DATE ('15-AUG-2007', 'DD-MON-YYYY'), 'YES');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0000651005, 'BASE',    TO_DATE ('13-NOV-2009', 'DD-MON-YYYY'), 'NO');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0010973671, 'BASE',    TO_DATE ('20-MAR-2008', 'DD-MON-YYYY'), 'YES');
INSERT INTO table_x (sa_id, char_type, effdt,                          char_val)
     VALUES     (0010973671, 'BASE',    TO_DATE ('18-JUN-2010', 'DD-MON-YYYY'), 'NO');
COMMIT;Also, post the results that you want from that data. I'm not certain, but I think you want these results:
`    SA_ID LAST_EFFD
    651005 13-NOV-09
10973671 18-JUN-10That is, the latest effdt for each distinct sa_id.
Here's how to get those results:
SELECT    sa_id
,         MAX (effdt)    AS last_effdt
FROM      table_x
GROUP BY sa_id
;

Xcelsius suddenly only allows chart to call data from first excel worksheet

Hi
I'm using Xcelsius 2008 Engage with SP1 FP3 installed.
I have never had this problem before, but in the last week, Xcelsius won't allow a chart to call data from any worksheet in the excel file other than the first worksheet. If I reorder the worksheets in the excel file, i can access a different worksheet, but only the one that is saved as the first worksheet (left most tab).
In dashboards i have already created, i can't change the data range of a chart that's already calling data from a worksheet unless i select the first worksheet.
Could this be an automatic update from microsoft? Has anyone else experienced this and worked out how to overcome it? It is frustrating to keep moving the worksheet to the front and reimporting the data everytime i want to make a change that isn't in the first excel worksheet.
Thanks,
Scott.

As far as I remember it's not possible. Thus, find attached VI and use it to convert line/column to excel cell format. It's working if you are not using more than 26 columns (i.e. column AA, AB, ... if this is the case you have to improve it a little)
Hope this helps
Attachments:
To_Cell_Format.vi ‏18 KB

Report 2 returning data from previously ran report 1 - Plus/Viewer

Hello,
We have an issue running through discoverer viewer and plus.
If you run the first report with a parameter for the year with this returns the correct data. However if you run report after the first with year 09-10, the 08-09 data is returned again from the previous report
It doesn't matter which order you run them i.e. if you run the 09-10 first and then the 08-09 the 09-10 data is returned.
The reports work fine when run in Discoverer Desktop.
When 2nd report is run after first it returns the data that appears in the first. This Does not happen on Disco Desktop. The SQL from the reports also runs correctly in TOAD.
Metalink notes suggest turning of the Webcache but this is not turned on in either apps tiers
I have also recreated both reports and this has not made a difference either.
Regards
Rachael

Hi,
Even with webcache turned off Discoverer holds the results of the last run from plus/viewer in the application server and will return these results unless an explicit refresh is entered. Normally, if different parameters are entered this is recognised and the report is re-run. I don't know how you are running your report but for some reason it is not recognising the new parameters and returning the last result set. A refresh should return the correct results.
Rod West

Need to return data from a query in different ways - Please help

We are using 10g R2
I have a proc as follows that has a query with over 100 values in the select clause:
proc one( input param1, input_param2,.... output_cursor )
as
begin
open cursor for
select ...about 100 values with most of them being calculated
from table1, view 1, table2, table 3, view 2 ...
where ....
and table1.col1 = input param1
and table1.col2 = input param 2
and view1.col5 = input param5...
end;
I need to return the data that comes from the above query in different formats, columns for a report would be different from columns for screen A and different for screen B. I need only certain columns for a report and different set of columns for another screen. I have wrapper procs that get different input params. From the wrapper procs I intend to call the above proc but would like only selected values.
How can I accomplish this? Since my main goal is to select different columns for each wrapper I was thinking of insert the data from the above proc into global temp table and selecting whatever columns and order I want from the wrappers.
What do you think? Any other solutions?
Thanks
Edited by: user565033 on Jan 21, 2013 7:50 PM

You need to clearly separate roles and responsibilities. The PL/SQL code that creates and supplies a cursor handle is server code tasked to supply data. The code that makes the call for server data, is responsible for formatting and rendering that data.
Thus moving data formatting into the server code needs to be question. Simple example. Cursor does not return invoice date as a date - but formats it into a string using TO_CHAR().
This works for client1 - as that is the date format expected. However, client2 has different International settings and specifies a different date format. Invoice date, formatted into a string by the server, now renders in the wrong format on client2.
Server code should not be concerned with rendering and formatting of data send to a client.
As for the idea to use a global temp table is ..., well to put it nicely, it smells. Badly.
The single most expensive operation on a database platform is I/O. And now you want to read server data and write it to temporary storage, and the read data from temporary storage to return to the client? What on earth for!? Why purposefully increase the size of the I/O workload? Why decrease performance and undermine scalability?
Provide a proper abstraction interface to the client. Enable it to specify (as simplistically as possible) what it wants ito data. There are a number of ways to design and implement this in PL/SQL. Simplistic example:
SQL> create or replace package Employees as
2
3          EMP_FULL_DETAILS        constant integer := 1;
4          EMP_BASIC_DETAILS       constant integer := 2;
5
6          procedure GetEmpByID(
7                  cur out sys_refcursor,
8                  empID in emp.empno%type,
9                  template in integer default EMP_BASIC_DETAILS
10          );
11
12          procedure GetEmpByName(
13                  cur out sys_refcursor,
14                  empName in emp.ename%type,
15                  template in integer default EMP_BASIC_DETAILS
16          );
17 end;
18 /
Package created.
SQL>
SQL> create or replace package body Employees as
2
3 type TArray is table of varchar2(32767);
4
5 TemplateList       constant TArray :=
6          new TArray(
7                  'EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO ',
8                  'EMPNO, ENAME, JOB '
9          );
10
11 procedure GetEmpByID(
12          cur out sys_refcursor,
13          empID in emp.empno%type,
14          template in integer default EMP_BASIC_DETAILS
15 ) is
16          sqlSelect       varchar2(32767);
17 begin
18          sqlSelect :=
19                  'select '||TemplateList(template)||
20                  'from emp where empno = :empID';
21
22          open cur for sqlSelect using empID;
23 end;
24
25 procedure GetEmpByName(
26          cur out sys_refcursor,
27          empName in emp.ename%type,
28          template in integer default EMP_BASIC_DETAILS
29 ) is
30          sqlSelect       varchar2(32767);
31 begin
32          sqlSelect :=
33                  'select '||TemplateList(template)||
34                  'from emp where ename like :empName';
35          open cur for sqlSelect using empName;
36 end;
37
38
39 end;
40 /
Package body created.
SQL>
SQL> var c refcursor
SQL>
SQL> exec Employees.GetEmpByID( :c, 7499 );
PL/SQL procedure successfully completed.
SQL> print c
     EMPNO ENAME      JOB
      7499 ALLEN      SALESMAN
SQL>
SQL> exec Employees.GetEmpByName( :c, 'A%', Employees.EMP_FULL_DETAILS );
PL/SQL procedure successfully completed.
SQL> print c
     EMPNO ENAME      JOB               MGR HIREDATE                   SAL       COMM     DEPTNO
      7499 ALLEN      SALESMAN         7698 1981/02/20 00:00:00       1600        300         30
      7876 ADAMS      CLERK            7788 1987/05/23 00:00:00       1100                    20
SQL>

Returned data from database field having data type CLOB

hi..
i hv table having CLOB field type ... having 12000 char length ... data is present in the field... but when i do select on that field it only returns the limited data from that field for any given row...
pls let me know wuts may b the problem...
cheeerrss..

Are you running the select from SQL*Plus? If so check out the [SET LONG|http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12040.htm#sthref2800] parameter.
HTH!

Only return data from "First Occurrence" of a record?

Similar Messages

Maybe you are looking for