Only right earpiece working Nokia701

all of a sudden, only my right earpiece works on my phone, if i plug the earpiece half way, both seem to work, but the earpiece can stick that way. i have tried many other earpiece and am certain the fault is from my phone.
any help????

It sounds as if you may have developed hardware issue with 3.5mm AV connector and that visit to a Nokia Care Point is now indicated, which may be found here:http://nokia.com/support
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Only right speaker works SleekBook 15 b086sr

Hi,
Just got new HP SleekBook 15 B086sr, but only right speaker is works.
This is hardware or software problem, for now I have a time to bring it back to store.
Could somebody help me.
Os: WIndows 8
Product #:c6t79EA#ACB
Serial {Content Removed}
Thank you.

Hello Igor2012,
I see that you are having problems with the right speaker not working on the computer. I have a couple of suggestions that may help with this issue.
Here is a link that has some troubleshooting steps for no sound. Follow the steps int he link and it may help with your issue. Try to uninstall and reinstall the driver and make sure it is updated.
Let me know if this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Only Right Earphone Works

Just today, after having my shuffle for about 6 months, I can hear out of the right earbud but the left one doesn't work. Sound comes out of it once in a while so it goes on and off. Believe me it's not the headphones because I've tried several headphones and it's the same problem. Even with my speakers, the right speaker works but not the left one. Sometimes it works if i don't touch the iPod but that kinda stinks. It is fully charged too. If anyone has the same problem or has an answer to it please post.

I think I have found out what's wrong with the headphones. (I know this might sound a little disgusting) I think the sound is blocked by earwax. I discovered that you can still hear the sound if you turn the headphone around. I will see if I can clean them somehow.
Edit: Wohoo! It works! Soap and water=Working Apple In-ear headphones! God, why didn't I think about this before? (They have been "broken" in over a month now)

Only right speaker working when doing audio on iChat...!

Hello,
I just got the new MacBook Pro and when I use the audio features of iChat the audio of the person I am talking to only comes out of the right-hand side speaker! Other sounds come out of the right and left, such as message alerts, and my speakers otherwise are working fine. Only when I engage someone in an audio chat does the sound from their end come out only on my right speaker...
Any ideas anyone?!
Chris M.

Hi CM!
That is normal when video conferencing with the Macbook pro. The microphone is located on the left hand side, and to reduce feedback the left speaker is muted when conducting a video chat.
This also may help: http://manuals.info.apple.com/en/MacBookPro15inchTechOverview.pdf
Enjoy your MacBook Pro!

Only right speaker working while chatting

While using a chat program, e.g. Skype or Google Hangout, the left speaker turns off (MBP Retina 15")!
The left speaker still works for other simultaneously running tasks, like music, but is off for the chat app.
Therefore it has nothing to do with the speaker balance in Settings panel (which btw is set to middle).
As you know the microphone is enclosed in the left speaker, why some think it is logic to close the left speaker while an app needs the microphone to avoid echo.
But this is not true. All of the chat programs, like Skype and Google Hangout do have echo reduction in its software and does not depend on the computer hardware. Apple should not need to close the left speaker because the microphone is too near. To prove this I have used Skype and Google Hangout in Windows/Bootcamp and there both the speakers are enabled, as should, and without causing echo to the other person!
This means it is OSX software fault/feature/bug that closes left speaker while an app is accessing the microphone! How to solve this? It should not be like this and is proven not necessary.

I have a 2009 MBP.
Same behavior you just described when using internal speakers.
Seems logical to me that left speaker should be shut down while accessing mic due to proximity.
When running on headphone port, external speakers, both speakers active.
This also seems logical, and it would be the user's responsibility to set reasonable distances.
It may be possible to force left speaker on using Audio MIDI Setup utility, if you really want to.
Otherwise, if you're just looking for more sound from right internal speaker while using Skype, go with Boom app, available from the App Store for around $10. Works great.
BTW, new retina models have WAY better speakers and out-of-the-box volume capability.
Hope this helps.

Only Right Headphone Works

It started almost right after I listened to a song where there was a part where all of the noise would go from left and then right. It was supposed to do that, but then, within the next 10-15 minutes, the left one stopped playing any music at all. I don't know if there is any relation.
Also, this happened after I updated my iPod, which has been suffering from the same stuff that supposedly everyone who updated their iPod has; it's going terribly slow, sometimes freezes, all that great stuff...
Any help would be greatly appreciated.
Thanks again,
~KSN2122~
Windows XP Windows XP Compaq Presario Intel Pentium 4

Not sure whether it is a hardware or software issues
For software
restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If does not solve, likely a hardware issue relates to the headphone jack of your iPod, if you have test with another headphone with same result, you need to send your iPod for service

IPad 2 - Only right headphone works.

I Am now only getting sound through one of my earphones, and have tried many pairs! Can the earphone jack socket be replaced? My iPad is no longer under warranty, but would apple be able to fix this and how much would it cost? Cheers yo

You're welcome. Next step is a reset. Press and hold both the home and button until the Apple logo appears. Release both buttons. Wait until your iPad starts on it's own. Next come settings> general> reset> reset all settings. No data is lost but you'll you'll have to reconnect your WiFi. Next is a trip to the Apple Store.

Only right speaker works.

I just got my ibook today and i found out my left speaker doesn't work. It is not a huge deal as i am going to buy better speakers soon, but i would like the laptop speaker to work when im not at my desk. I checked the balance and everything is OK. Any help would be great. Thanks.
ibook G4 12" Mac OS X (10.4.3)

Welcome to Apple Discussions.
It sounds like a hardware failure. I'd give Apple a call or make an appointment with the guys at the genius bar at your local Apple store if you have one nearby.
Apple is liable for your repairs, so it will be free.
Brian

Firefox frequently freezes. I can't click on anything (tabs, menu buttons, bookmarks, etc.) The only button that works is the upper right close button which when clicked will ask me if I want to "save & quit." Then I have to restart. Help fixing this?

Frequently when I use Firefox it will all of a sudden freeze. It no longer will accept any user input from the keyboard or mouse. I cannot click on any of the open tabbed pages I have or on my bookmarks or any of the menu buttons. Nothing works. When it happens if it is loading a page it will just freeze in the middle of loading it. I've tried to see if the freezes are caused when it loads certain types of content (java, flash, etc...) but there seems to be no rhyme or reason as to when it happens or with what types of pages. I cannot find a pattern. The ONLY button that works is the close button in the upper right hand corner (X). I can click on that and then Firefox will prompt me with it's regular message asking me if I want to save and quit, quit, or cancel. I'll hit save and quit and then reopen Firefox. It opens my tabs and if I was in the middle of a post it generally will still remember the text I've typed (except Facebook!).
It's beginning to drive me nuts and I'm really hoping to find a fix to this.

You will also notice that your shift key will be emulated. Meaning that keys you will try to press will press but they will act like you are pressing the shift key when you are doing them.
Try this, minimize the firefox window by pressing the tab on your taskbar. After doing that maximize it again. You will magically be able to click any link on your page. When you navigate to a new page however, the entire situation will start all over. My only remedy is rebooting and hoping it doesn't happen again soon.

I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?

I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run my Itnues from this external and now my library is gone. Luckily I have it saved somewhere else, which is not a problem, but I won't be able to write to this HD for right now. I can't see an option to give those permission back.

cptjuanjvarona wrote:
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?...
Unless what you have to transfer is enormous, skip the external HD altogether and use a USB flash drive; you can get them with capacities to 128GB. Format the flash drive as FAT32 or ExFAT as LowLuster suggests so it can be read and written to on both PC's and your Mac.

Main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

I spoke to the reseller today and they aggred to exchanged it. They didn't elaborate on the actual cause but thought that it had to be a hardware issue.
It could either be the issue that Euvix suggested or it could be as simple as the outer speaker is simply not working.
Anesi, did you use the phone before the upgrade? Looking at what you've written I take you didn't so I would go back and get it exchanged.

Why does only my right speaker work?

I have had an Iphone 4 & a 4S. With both phones, only the right speaker works. Can anyone tell me why?

That's because the left "speaker" is actually a microphone. The right one is a speaker. Kind of weird... but there's nothing wrong. It's so you can talk on the phone

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

Files with embedded profiles shown as untagged in Bridge.Bridge only right about files saved from PS

Photoshop works perfectly when saving files as .psds etc. or PDF-Standards (PDF-X etc.), embedding the profiles correctly. However, InDesign and Illustrator do not embed any colour profiles in .pdfs, in their native formats (.indd and .ai) or any other format apart from .jpg.
Why is Photoshop working perfectly, yet AI and INDD are not? Everything was installed at the same time, and the colour management settings are all synchronised in bridge.
All I want to be able to do is save as one of the default PDF-X settings (via File > Save As in Illustrator), but as I said, saving as the same PDF-X standard across all 3 programs only embeds the profile if saved from Photoshop. I don’t have the slightest clue why Photshop is the only one that works.
Although, according to this post, which seems very similar to my question, it might be Adobe Brdige CS5 that is wrong: http://forums.adobe.com/message/3565578
Because I have files that Bridge shows as untagged, which upon opening do in fact have an embedded colour profile. Ugh, this stuff is confusing!

Thanks so much for your help, I didn't know any of those things. Very interesting.
In regards to Photoshop rasterizing PDFs, what exactly are the ramifications of that? A PDF-X saved from Photoshop is still fine to send to the print press, right?
So far, all the print work I do I design in the colour space specified by my printer, then save as a PDF-X1a (which is also what they specify), by doing 'Save As' in Illlustrator. I also name the file with the colour space, and my printer has not had any problems with this.
The reason I'm asking about colour management, is that I may start expanding into the area of designing adverts for newspapers and magazines, and this involves different colour spaces. And newspapers etc. around here won't be as fussy about colour management as my print-press, which is a very good print company. So it would be better if I knew they were getting PDFs from me with embedded colour profiles.
I think the situation is that when I save things with embedded profiles, that it does in fact work, despite what Bridge, Illustrator and InDesign say. I have .ai files that show up in Bridge as untagged, but when opened in Illustrator, do indeed have an embedded colour profile.
It's very confusing to know what's going on.
A rather non-technical workaround, which alot of people seem to use, is just designing the file in the correct colour space, saving the file in that colour space, naming the file with that colour space, and then when it gets to the printer/magazine/newspaper etc. hoping that (A) there is colour profile data in the file that people can see at the destination or (B) the people at the destination know from the file name that you designed it in the correct space, and so they just Assign Profile at their end, and all is well.
I mean, what's the alternative, I can't suddenly stop using Illustrator and InDesign, and doing ALL my work in Photoshop, just because of what Bridge says!

My MacBook Air headphone jack only left channel works

Builtin speakers are working fine on my MBA 2012, but when I plug any kind of headphone into the jack, only left channel works. If I tune output balance to right, then sound nothing.
I found there are only four metal contacts in the jack, two on each side, then one for ground, the other one for left channel, none for right channel, what about yours?

At last, found it isn't a problem, actually any 3.5mm headphone of standard can work, just plug into the jack fully ( only one mm left ) . enjoy ~~

Only right earpiece working Nokia701

Similar Messages

Maybe you are looking for