Only Sales Organitation to be replicated to CRM from R3

Hi All,
In R3 we have created the 2 sales Orgs (Company Codes: 1000,2000) and in CRM we have successfully extracted/replicated the R3 Sales Structure . but i have a situation where i only want the Sales Organization (2000) which i want t use it as Marketing Organization for marketing purposes.
i have been to "Copy SAP ECC Sales Structure" page the to replicate the Sales Org but here i can see the combination of Sales OrgSales OfficeSales Group but i want only 2000 Sales Org to be replicated in CRM.
or shall i create 2000 here in CRM as Marketing Org Manualy.
Thanks and Regards,
Arun

Hello Arun,
You want to use only one Sales Organization 2000 in SAP CRM.While copying the organization structure in T Code CRMC_R3_ORG_GENERATE ("Copy SAP ECC Sales Structure") select only one Row which has 2000 as a sales Organization.Then click on "Generate Selected Lines".Click on SAVE at the end.
This will create only one sales organization in SAP CRM. After that go to PPOMA_CRM & mark this Organization as Marketing Organization as well.
Regards,
Rajendra Sonawane

Similar Messages

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

How to notify a team when Product is replicated to CRM from MDM?

Hi All,
MDM is the back-end for SAP CRM in our project. Product is created and replicated from MDM to CRM via XML interface for Products, it is one way replication process. Recently we have implemented Opportunity management in which these products are being used. For that, we have updated Sales Area and Pricing to all the products in CRM with a custom report.
Now the requirement is, when a product is created and replicated to CRM from MDM, a team should be notified about this. So that, they would maintain the responsible sales area and pricing in replicated Product to use it in Oppt.
Could you please guide me how to map this requirement in our system. Kindly help me with the feasibility and solution overview of the above requirement.
Thank you in advance.
Regards,
Maddy

Hi Maddy,
Would recommend workflow technique to explore if you have not done yet. Refer below link which I believe will help you a lot.
SAP MDM Workflow
Rgds
Hari

Customer sales area data not replicated to CRM

Hello,
I'm setting up the data replication model for master data based on configuration guide C03.
We have the following customer master situation:
existing customers with nr range 500000 - 599999 and account group A are created in ERP and replicated to CRM.
new customers with nr range 600000 - 699999 and account group B are created in CRM and replicated to ERP.
PIDE settings are fine.
The initial download of CUSTOMER_MAIN en CUSTOMER_REL went well. I've set a filter in CUSTOMER_MAIN on field KUNNR: value between 500000 - 699999. Everytime a sold-to business partner is created in CRM or a customer is created in ERP, the data gets replicated to the other system.
So far so good.
But here comes the problem: when I assign a sales area to a customer created in CRM (nr range 600000-699999) in ERP, the sales area data is NOT replicated back to CRM. When I assign a sales are to customer created in ERP (nr range 500000-599999) in ERP, the sales area is replicated back to CRM.
Do I have to run BUPA_MAIN? I don't think so, because sold-to business partner are already replicated to ERP.
Is the filter in CUSTOMER_MAIN not good? Should I split the nr ranges into 2 rows: 500000-599999 and 600000-699999 instead of 500000-699999
System environment:
CRM 7 EnhP2 (CRM RDS)
ERP 6 EnhP6
Kind regards,
Koen

Hello,
I found the problem. The PIDE was not set up completely: I only set the account group for ERP customer in the 'R3-->CRM' dialog structure. I've added the account group for CRM customers as well, and now customer data of CRM customers added in ERP, is replicated to CRM.
Cheers

Contact person replicating to crm from R/3

Hi All,
When we add a contact person to a customer in ECC, it is not replicated to CRM. 2 BDOC type is created, BUPA_MAIN and BUPA_REL. In BUPA_MAIN bdoc, the guid number and partner number is filled, but in BUT000 table there is no entry. So, in BUPA_REL bdoc the error "Enter at least one number for the business partner" (R11 123) occurs. We cannot replicate the contact person to CRM from ECC.
Thanks for help.

Hi,
Refer to this thread
Business Partner Exchange CRM -> R/3
Shridhar

Customer Address Not getting replicated to CRM

Hi,
In CRM system we had created on BP and replicated to ECC system. Replication was done successfully. In ECC now we had modified some of the details like Name, Address, contact details. From this updated details only address is not getting replicated to CRM system.
While all the other data which are modified are getting replicated to CRM system. In case if some one has encountered this issue then please me know the solution step.
Does SAP support the modification and replication of business partner address from the third system (System in which it is not created)
With Regards
Ankush Rai

Hi Rai
Please check the following thread , It may helpful your query
Re: When replicating customer from ERP, the address is not replicated to CRM.
Hope it solved your issue
Regards,
Naga.Srikanth

Sales Area Data isnt replicating from CRM to ECC

Hi Gurus,
We are replicating some BPs of certain groupings from CRM to ECC.
We performed all steps relevant for this task mentioned in Best Practice u201CMaster Data Replication C03u201D. After performing the
steps results are as follows:
u2022     BP General Data is replicating without any trouble.
u2022     When registering sales area data in CRM and trying to get this replication to ECC we see that the BP Sales Area data isnu2019t replicated.
Monitoring SMW01.
The BDOC BUPA_MAIN ended with the following error:
Messages for business partner 0007000362: Fill in all required entry fields
Action already taken:
After reading this message I have reviewed the mandatory fields per Account Group in ECC and mapped them with the CRM ones. Even this changes I still can get sales area data in the ECC BPs replicated.
Is there something I am missing here.
Thanks for your help.

Hi,
Regarding debugging from CRM to R3. Please follow the below steps.
There are 2 methods to debug the Business Partner (BP).
First Method:
1)     In CRM, Go to SM59 -> ABAP Connections => The ECC client -> See if the saved user (in logon details) that is used to connect to ECC from CRM is a Dialog user.
2)     You can use transaction code SU01 to check User Type of User.
3)     Deregister the Queue through SMQS.
4)     Make changes to BP.
5)     Go to SMQ1, Select the Queue name Double Click 2 times then select the Tool bar (Debug LUW).
Second Method:
1)     Put a break point in Function Module SMW3_MFLOW_UPDATETASKBDOC.
2)     Create a BP and before save, type /h to activate debug, Mark update debugging option.
3)     When stops in Function Module u201CSMW3_MFLOW_UPDATETASKBDOCu201D you must be sure to set header-dbgmode = 'X' this will make the BDoc stay stopped in SMW01.
4)     Go to SMW01 and type /h and process the BDoc.
5)     Put a breakpoint in Function Module u201CCRM_UPLOAD_AFTER_MAP_HANDLERu201D and be sure to change LV_SYNCHRON = 'X' this will allow you to connect in ECC.
If the variable LV_SYNCHRON does not have any value, then it will work as background task, if the value is filled with the value u2018Xu2019, then it will allow debugging in R3.
And another point to be noted here is, the user type of the R3 should be Dialog User. If the user is not dialog, then it will not connect with R3.

CRM sales order is not saved in CRM but in ECC

Hi,
I am new CRM area and will not some hints on where to check.
When the the Sales orders are successfully created in CRM, they are replicated to R/3 but the sales orders are not saved in CRMD_ORDERADM_H table of the CRM system.
Also, I dont know see any details of the sales order in the interaction record document flow.
Can you please help me with any hints on where to check to fix this issue..

Hi Sangameshwar,
In CRM you can have two scenarios for ERP Sales Order.
1. ERP Sales offer and Sales order, using the CRM User Interface to create directly the ERP Sales Documents with LORD interface. The document is only saved in ERP. I believe this the scenario you are using.
2. CRM Sales offer and Sales order, the document is saved both CRM and ERP. The documents are replicated via Middleware.
In both scenarios the interaction record should add the document in the doc. flow, it's probably a missing customizing in the interaction record.
Hope this information help you.
Regards,
Jorge G.

Middleware-Replicating service transaction from CRM to R/3

Hi Experts
We are using the transaction SRVO( Service Transaction) in CRM and it has to be replicated to the R/3.
Can anybody tell me
1.what is the load object for replicating this transaction ?
2.Do i need to make any settings in R/3 for the replication ?
3.Do i need to create one new transaction in R/3. If so where i have to create the transaction ?
4. What would be the document type category of the replicated transaction ?
Thanks in advance
Nadh.
Message was edited by:
Nadh R

Hi Nadh,
Service transactions are replicated to R/3 as sales order, with sales items only.i.e. item category SRVS.
You need to maintain the similar settings as you do while replicating a sales order from CRM to R/3.
1. Create a order type in R/3 with the same name SRVO (Tcode: VOV8)
2. Create the item categories with the same name as being determined in the service order (Tcode: VOV7) e.g. SRVS
3. Mainatin item category determination, the way it is maintained in CRM (Tcode: VOV4)
Other than this, assign an external number range to your order type SRVO which is same as the internal number range of CRM. Ensure that the customer master and product also exist in R/3.
Before replicating a service order from CRM to R/3, Create a dummy sales order in R/3 (VA01) with order type SRVO (only for checking purpose)and your sales area,put the customer master and material and check if the transaction is complete. If not you will have to first remove the incomplete stuff, than only an order will get replicated error free.
If you get incompletion items like Plant, shipping point, contact a SD consultant or post another thread.
Regards,
Shalini Chauhan

Sales data not replicated for materials from ECC

Hello Experts,
When creating a meterial in ECC, the same gets replicated to CRM 7, but the data maintained in the sales tabs of ECC is not getting replicated to the CRM material master Sales & Distribution tab.
I have already maintained the corresponding ECC sales org in CRM sales org, in Tx PPOMA_CRM, and also other attributes.
Thanks in advance,
Vicky

Hi Vicky,
Before trying to download Material from ECC, one has to transfer customizing objects (e.g., Basis Components, Organizational Management (for example, transferred the sales offices), Sales and Distribution (for example, transferred the product groups))
Then one has to map the ECC sales office data with CRM org structure.
Please recheck if you have done all the prerequisite steps to download material in the following help link:
http://help.sap.com/saphelp_crm50/helpdata/en/91/d8fc377cb5be5ae10000009b38f842/frameset.htm
Hope this helps!
Regards,
Chethan

Assign sales organization data in product in CRM

Hi Gurus,
I need to assign/ delete the sales organization in a product which has been downloaded from ECC in CRM. It seems that we cannot change the data in "sales and distribution tab" unless making the SET TYPE editable.
Only 3 SET TYPES in the "sales and distribution" tab can be made editable by adding them in the table CRMC_PRD_CHANGE.
CRMM_PR_SALESA, CRMM_PR_SALESG and CRMM_PR_SALESG
Does someone have any idea of how to add a sales organization in a product that comes from ECC in CRM ??
Thanks for your help,
Jeff

Hi Jeff,
I am afraid whether one will be able to edit a product which is downloaded from R/3 to CRM. All the changes should be done in ERP and the same will be downloaded via delta download.
Please have a look into the following thread:
Products in CRM doesn't have Sales and Distribution Data
It might help you. Hope this helps!
Regards,
Chethan

BP choicefield 'active' 'inactive' replicated to crm ?

Hello,
in msa there is a choicefield 'active' or 'inactive' which I can set for a bp.
Is this replicated to crm afterconntrans ? Where can I find
Thanks for response,
Gerd

Hello Gerd,
This is a mobile only field and is not transferred to CRM Online.
When you mark a bp as inactive in Mobile, then it is not available to create transaction data in Mobile only.
Best Regards,
Aparna

When replicating customer from ERP, the address is not replicated to CRM.

Hello.
I'm facing the problem which the address data of customers is not replicated to CRM.
I've checked the business object BUPA_MAIN on t-cd SMW01, so I found that the task of addresses is "S" and it doesn't get GUID.
I'm not sure, but I doubt the error is caused by creating a new client in CRM.
In other words, I doubt that the setting of replicating the address data of customer is not active.
Does anyone have the knowledge of this problem?
BestRegards.
Miki

Hi Hedy,
Please go through this following note
Note 1511835 - Incomplete addr sent to CRM causing failed duplicate check
Hope it answers your Query
All the Best
Regards,
Srikanth.Naga

SAP WCEM sales order payment type replication to CRM

Hi All ,
The payment type added in WCEM3.0 is not getting replicated to CRM UI .
Any suggestion ?
Regards,
Naval Bhatt.

Hi Naval
Can you provide a bit more detail. It is difficult to try and think what the problem could be without sufficient information
Regards
Brian Maunde

Why unlocked no contract iphone 5s in us only sale for about 700 aud???

Why unlocked no contract iphone 5s in us only sale for about 700 aud??? N in Australia sales for 869 aud?
If u add 10% tax and reasonable shipping cost, which is about 780 aud, it should not be that expensive! Can any apple employee provide a good explanation?

justdoitdy wrote:
Can any apple employee provide a good explanation?
Maybe, but there are none here. This is a user to user TECHNICAL SUPPORT forum. In addition to us all being users just like you (Apple is not here), your question is not a technical support issue and is not appropriate for this forum.

Only Sales Organitation to be replicated to CRM from R3

Similar Messages

Maybe you are looking for