Only Show One Line of Data Depending on Status Column

Hi Gurus,
I have the ff. task which I need some help with.
I have a table which has a unique ID per entry and depending on the value in the Status Column (i.e. Pending/Approved/Declined), I'd only like to see one entry.
So to clarify, the initial status of an entry is pending, once it has been changed to Approved/Declined, I want to get rid of the Pending line.
How would I write this using VC syntax?
The fields I have to work with are the unique ID field and the actual Status value...
Thanks,
Bim.

Used an aggregate (MAX/Group By) to resolve this issue, closing it.

Similar Messages

  • Photo descriptions only shows 2 lines

    Think I found a bug, under photo info the photo title only shows one line and its only 2-3 words long, also the description only shows 2 lines. So if you have a description that is about a paragraph long you can't see it all. However if you mouse over the description you can see the content through a pop up window.
    What a pain to have to do this all the time, especially since that side panel has a mile of room under the faces icon that is not being used.

    Basically a support - two lines of description visible is Not Enough, and given the size of the panel it could be auto-extended to fit; that's what computers are for! The tooltip presentation is definitely the wrong approach for a description - it should be there when you view the pic!

  • Write To Measurement File Only One Line Of Data

    Hello,
    I have an express VI setup to acquire a single channel of strain running in a simple while loop.  The output is wired directly to a Write To Measurement Express VI.  However, the resulting measurement file contains only one line of data.  
    I have tried changing the settings of the VI to no avail.  I feel that I must be missing something basic.  My while loop is setup to take one measurement on demand for each loop.  I am assuming the VI knows to write each loop as a new line of data?  
    Thanks for any help,

    Did you choose "append to file" in the Express VI configuration settings?
    You need to upload your VI for further help.  It's impossible to help someone debug a problem without the code to look at.

  • When i reply to a group text it only shows one recipient and says "failed to send"

    I receive a text from a group thread I've been in for ears, when I open the text and respond, it only shows one of the members in the "to" line and then wont let me send any messages. any ideas? Also, if I'm typing a text and I get another text the whole keyboard locks and goes black until the text notification goes away. is this supposed to happen?

    Yes, that is correct.

  • I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

    I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?

    If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
    Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
    What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
    iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
    The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
    http://support.apple.com/kb/ht1766
    Don't worry! Everything should be back to normal if you follow these steps.

  • My Viewing area only shows one photo at a time now :(

    Yesterday I noticed that my viewing area only shows one photo at a time. It used to display thumbnails of all the photos in the selected event - or library. Now, I'm forced to scroll down and view them one at a time or go into edit mode to see some thumbnails across the top of the screen.
    Did I accidently do this? Was it part of an OS update? (I've been away for a month and just don't think I did anything to cause a change...) Can anyone tell me how to view all the thumbnails in the viewing area again?
    I'm using iphoto 08 version 7.1.5 (378)
    I would very much appreciate some help with this.

    Thank you so much!! I love simple answers. I actually spent a few hours on this - seemed to play and test all the settings - and I just didn't understand this application of that slider.
    Thank you again.
    I'm very happy.

  • I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod.

    I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod. I have already resynced it, any suggestions on how to fix the problem without having to restore my iPod to factory settings.

    Becaise the digitizer is broken in that area
    Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • Login window only shows one user account

    Hi,
    Anyone has an idea what's happening?
    I'm running Yosemite on MBPr 15" Mid-2012
    When I power on or reboot the laptop, on the login window it only shows one user account, my account which is the Admin account.  It doesn't show the secondary normal user account I created for my wife.  However once I'm logged in and I hit log-off, then it shows the 2 user accounts available for login.
    Thanks in advance!

    The lock is on the bottom left not bottom right. Sorry mixed that up.
    Letting other users unlock the drive
    If you want to make the Mac available to a user that doesn't currently have unlock capabilities, log in as a user that can unlock the disk. When you see your own desktop, choose "Log Out (user name)" from the Apple () menu. Also, you can unlock the disk, then switch to another user from Fast User Switch menu in the menu bar.
    If you want to grant existing users the ability to unlock the drive on their own, open the Security & Privacy pane of System Preferences. Select the FileVault tab and click the lock icon in the lower left corner of the window. Enter your admin privileges when prompted. Click the "Enable Users..." button to add existing users to the list of accounts that can unlock the disk.
    Hope that helps,
    Weston
    Supporting Articles,
    OS X: About FileVault 2 - Apple Support

  • HT1711 How do I get a album that I purchased already to show the whole album. After the lastest upgrade it only shows one song from the album. I tried repurchasing it but it says that is already purchase but will not re download. Please help.

    How do I get an album from Itunes that I have already downloaded to show the complete album again. After the last update it only shows one song. I tried to re purchase the whole album but it will not let me cause I already purchased it. Pease help

    The large text size makes your post almost impossible to read.
    Excessive use of bold or capitals (also) makes posts difficult to read.
    You can drag most of the column headings left or right, or right-click on the header to turn columns on or off.
    Once you've used File > Display Duplicates or Shift > File > Display Exact Duplicates you can use File > Display All or the Display All button at the bottom of the list to restore the display.
    For general advice on organising your library see this article on Grouping tracks into albums.
    tt2

  • Only showing one case of group 2

    I have group1 as Department and group2 as order type. I am trying to show simple thing like this.Sum of order amts by order type but this is what is displaying:
    Dept            Ordertype
    Medals      $100
    Schools     $100
    Trophy       Internet
                    $300
    but only shows the first order type
    the problem is only shows one order type only for 1 of the departments, the last one. but all departments have many order types.
    why does it show only 1 time

    Hi Paul,
    One more alternative way  i.e
    As usually your workaround not to change..Please replace the group footers fields means like that
    Group Footer 2 : {Group#1 Name}      {R Total 5}
    Group Footer 1 : {Group#2 Name}      {R Total 6}
    See all order types display or not?  I hope this seems to work..
    Please make sure ASAP
    tHANKS,
    DJ

  • Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

    Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Airplay mirroring is taking very long to load and is only showing one static view then it crashes

    airplay mirroring is taking very long to load and is only showing one static view then it crashes.
    I am tring to mirror ipad2. I just upgraded to IOS5. Is it an apple TV problem or an Ipad2 problem?
    What should I try to fix the problem?

    I think i found the solution.  I got mine working. 
    Reboot the iPad by holding down the Home button and power button at the same time for 6 seconds.  The screen will turn black, apple logo will appear, and it will restart. 
    Then restart the Apple TV.  (I just unplugged the power)
    Then restart your wireless router.  (again, I just pulled the plug on it)
    After doing that, i tried the mirroring again, and it worked great.  As soon as I turned it on, it appeared on my TV and is working very quickly.  (well, everything I do on the iPad is delayed on the TV by half a second)

  • Edit Appraisals:  Notes only shows one row at a time

    Under the Employee Review tab of MSS-->Edit Appraisals, when I click to create an appraisal, the appraisal form in our system has areas to add notes.  However, in the portal, the area to add notes is only 1 row.  It is scrollable, but you can only see one row of text at a time.  How can I expand the notes area/editor to show multiple lines of text?

    Turns out the configuration is on the R/3 side when setting up the Appraisal.  There is an option for number of lines for notes.

  • 28 page Designer 7 .pdf form only shows one page in Acrobat 8

    Help!
    We have .pdf's that were generated with Designer 7.1, containing filled-in form data, but they cannot be viewed under Acrobat 8.1.
    For example, a 28 page .pdf displays OK under Acrobat 6 (with warnings) and Acrobat 7 (error-free) ... but only displays one, blank page (with no errors and no warnings) under Acrobat 8.
    Does anybody have any idea why Acrobat 8.1 is only displaying one page instead of the full 28 pages seen with Acrobat 6 or Acrobat 7?

    Hi -
    Thank you for the reply:
    1. The "Adobe Acrobat" forums ultimately point back to "Adobe Reader" - and this forum. There doesn't appear to be any separate forum for "Adobe Acrobat".
    2. Thank you for the suggestion about Lifecycle Designer.
    I tried to download LifeCycle Designer, but the link pointed to exactly the same "ar 8.1.2" download I'm currently having the problem with. Do I need "Lifecycle Enterprise"?
    3. I've tried multiple different versions of Acrobat Reader 8.1.x, and even Acrobat 8/Pro. They all show only one page: no errors, but no data, either.
    Acrobat 6 and 7, however, show a full 28 pages. Even Linux shows all 28 pages (and reports no errors or warnings in the .pdf). Do you have any idea what could account for this?
    Thank you in advance

  • After submitting a podcast, it only shows one episode and never updates?

    The podcast was approved on the 17th September, but it only ever showed one episode, and has never updated.  Can anyone help?
    https://itunes.apple.com/gb/podcast/bethany-church-warrington/id562744688 pulls a feed from http://bethanywarrington.com/blog/?feed=rss2&cat=4
    The feed is generated from Wordpress.  Thanks

    Thank you, I think you're right.  The 12th september one has an extra line in the RSS:
    <enclosure url="http://bethanywarrington.com/audio/120909%20Sermon%20John%20Addison.mp3" length="0" type="audio/mpeg" />
    Every post should have this, because they all have links to MP3 files.  The only weird thing is, I don't know how made this one post different, because I always submit every MP3 the same way with a link in the main body of text.  How do you think I could add that into every post?

Maybe you are looking for