Only "single display" possible

i have a problem with my gf4 mx440!
everything runs fine on my old  pIII800 but i cant clone my desktop to my tv! i alway got to change my primary monitor to watch films on it.the only option i have is "single display" under nview! i already changed my drivers and tested version 61.77,66,93 and 67.02 (guru3d.com) but no change....
any suggestions? i want to clone my monitor and my tv!!!

Uhm i've a similar problem but ......
I've a Msi Gforce 6800GT 256Mb. Till 1 week ago i had tvout connected to my tv and Dsub connected to my analog monitor . All was working right, Clone mode or dual view were working perfectly and i could see films on tv and playing a game on monitor. At the same time.
Then after formatting everything changed.
1° - The dual view mode is no more avaiable
2° - If i try to set the clone mode, it set the new mode, and start the usual 15 sec countdown to revert the setting if anything went wrong but .... it revert to single display mode  if i press "yes" or if i press "no" or if i wait the 15 sec timer.
3° - Underd the troubleshooting window the "my connected tv is not being detected"  check is disabled .
4° - If i set single display mode on tv, it work but ..... all settings for tvout output like composite or s-video are absent :-/ just empty cascade menu. The video on tv is show correctly ... well just b/w but i know how to solve it.
Before the format i was using nvidia 66.93, and after it i tryed both 66.93 and 61.77. I'm using Wxp pro with sp1a and all security updates. About the virus, don't worry, completely deleted and re-downloaded all drivers.
Reading previous posts i'm going to try the driver cleaner 3 but don't think can solve my problem.
Any hint for this situation is wellcome :D
Edit : I apologize for this useless post because, after posting here, i tryed to install msi 71.22 drivers and they rock !!! :D All work perfectly like heaven.
Sorry again for the useless post.

Similar Messages

  • HT5019 Single display only

    So i have an apple tv, iphone, and a mac pro. i know how to figure out to play the video on tv using my phone. but on my laptop it's saying the there's only single display and that i need a second display.

    If your Mac is new enough, you can use AirPlay to display your Mac screen via your AppleTV.  If you have an older Mac, you can get AirPariot that will provide the functionality.
    Depending on your Mac, it should have the ability to connect an external monitor.  It will most likely have either a DVI, mini-DVI, or mini-DisplayPort connector.  Once you know the kind of graphics port on your Mac, you can get an adaptor and cable that will allow you to connect to an external monitor or digital TV.  For example, I use a mini-DisplayPort to HDMI adaptor when I connect to my digital TV.  I use a mini-DisplayPort to DVI cable when connecting to an external 24" monitor.

  • Overview of Leave : Message Display possible as of 07.10.2008 only

    Hi ,
    In ESS / Leave request / Show overview of Leave in the field "Leave Since" we try to put a date in the past and we receive the following message : Display possible as of 07.10.2008 only .
    Is that due to configuration ? Is that standard SAP to display only "future" Leave ?
    Thank you .

    Thanks. Prompt reply!
    Iu2019ll give it a go. That does seem to be missing from the system I have found this problem.

  • The software i use to play video cause for multi display in which my Macbook pro has only a single display. Is theres a way to get a multi display added to to my computer

    The software i use to play dj music videos cause for multi disply in which my Macbook pro has a single display funtion. Is the ant way to get multi monitor display added to my computer

    If the monitor can be detected your Displays preferences should show it in its Arrangement panel.  You may have to play around with your Display panel to get the desired resolution.  And also may have to click detect displays and gather windows to see both sets of preferences on your main screen.

  • Using the IMac 27 only as display for MacBook Pro

    Hello,
    i like to use my iMac 27 only as display for my MacBook Pro.
    I have the connecting cable.
    I must start the iMac, he is booting and then i can plug in the cable to my MacBook. Now i have the second display for using with my MacBook.
    Now my question: Is it possible to use the display without booting the iMac-system?
    Thank you for help!
    Best wishes
    Lutz

    LutzTrabert wrote:
    Now my question: Is it possible to use the display without booting the iMac-system?
    no.
    [_*Using a 27-inch iMac as an external display*_|http://support.apple.com/kb/HT3924]
    JGG

  • No line item display possible for account -fbl3n

    Hi,
    No line item display possible for account ,
    i'm getting the abv error when run fbl3n .. pls tell , how to resolve it..

    Dear,
    It means no data found for your requirement.
    If you want to find out the list on base of G/L please enter G/L and click on all item.
    Other wise if you want to see only open item then click on open item and remove date from field of open item date.
    Also click on noted item and click on execute button
    Regards,
    Mahesh Wagh

  • OLCS3 Field Monitors display black video in single display

    I am using OL CS3 on WinXPSP2 with Canon HV20 camcorder on FireWire to my Lenovo T60 laptop, and had some success in getting clips recorded yesterday. However, no luck today. The Field Monitors do not show the live video feed, but remain black.
    I rebooted my laptop, plugged in FireWire port (in an Adaptec PCMCIA card), started OL, and turned on HV20 camcorder. In OL, the Canon HV20 is listed in the Devices list, and selecting it causes Field Monitor to display text label "canon hv20 camcorder". The Field Monitor(s) still show black video...while the camcorder display shows the live image.
    My laptop has only the integrated LCD panel display in use (as at boot time), the video adapter is ATI Radeon Mobility X1400 which does support dual displays. I used ATI Catalyst sw to check the video settings, which indicate there is only one display in use, it is not running clone mode or extended desktop, and the video overlay is set to show in Standard Dual Mode (which indicates video would show on both Main display and Secondary displays in original source video aspect if two displays were in use).
    I read the Adobe knowledge base kb402180 "Field monitor does not display video when used on a computer with dual monitors (OnLocation CS3)" but it does not seem to solve my problem.
    I can use Premier Pro CS3 to capture video I recorded to tape on the HV20 using the same hw setup. So it seems the FireWire link is okay, the camera can push a video stream on it, and so I remain suspicious of the video overlay settings. Only other thing is maybe the camera is not pushing live video stream to the FireWire cable? I'll check on that.
    Anyone have any help?
    Thanks,
    Patrick

    Brooce,
    Thanks for the tip on the bug form...that is great.
    As it turns out, I ran a parallel request into the Adobe support forum, and Erik H got me the answer to this problem yesterday....I found that deleting the appProps.xml file in C:\Documents and Settings\(your user folder)\Local Settings\Application
    Data\Adobe\OnLocation CS3 solved my problem.
    MY GUESS
    I use my laptop with dual external displays most of the time, but while trying to record with On Location I only use the integrated LCD panel while in the studio. I am guessing that OL gets confused if I happen to run it in both of these hardware configurations....the appProps.xml could get written with dual displays in my office and then OL might expect them even though the current hw config is a single panel while in the studio.
    -Patrick

  • File server 2008 R2 Multiple share folder , single user show only single folder , not show any other folder

    I've installed windows 2008 standard r2 server. 2. Configured a domain. 3. Joined 10 clients to the server. 4. Created shared folders on the sever restricting to users. (ex.USERNAME:system01 can access a shared folder:system01 only) 5. I need to give the
    below permissions only. Please let me know the permission combination. Read / write / modify - allow access Delete / cut and copy from server - deny access Basically elaborating  the current scenario. 1.Server has multiple shared folders where the users
    are asked to put in their data
    host name :system01 user logging in:system01 shared folder for the user in server:system01 so is for others also. 2.Example ,system01,system02,system03. Only user 'system01'
    will be able to access 'system01' shared folder so is others too. System01 show only single share folder at system 3.Basically to avoid all kind of confusion I have named host name of systems also the same way.

    Hi,
    When you grant users "read" permission, then copying is possible and if you grant users "modify" permissions, they can also have "cut" permissions. 
    The 'system01' share folder is created by user 'system01'? If so, you could grant "creator owner" permissions to configure users only can access their own folder.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • I am getting the error "This movie can be played only on displays that support HDCP" when attempting to play a HD movie from iTunes to my TV.  The TV is a Samsung UN46B7000WF w/resolution 1080p

    Hello Apple Community,
    I am getting the message "THis movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection)."  This is the first time I have tried to watch a HD movie that I bought from iTunes from my iMac to my TV.  (This is also the first attempt to go from my iMac to my TV.)  I have a Samsung LED tv that says it is HDCP compatible with Full HD (1080p) and Native resolution is 1920X1080.  I bought a Rocketfish Thunderbolt to/Mini Displayport to HDMI adapter (says support is up to 1920X1200 video resolution) and Mediabridge ULTRA Series HDMI Cable (35 Feet) - High-Speed Supports Ethernet, 3D and Audio Return category 2 certified (supports resolution up to 4K including 1440p, 1080p, 1080i and lower).
    I can get the iMac to display on my TV but am guessing that I have not managed the settings correctly in Display for either the iMac or the TV.  In addition, I do not have sound yet.  Although, the card from Mediabridge says that I need to update my drivers.  Any help/advice with the settings for iMac to TV to watch in HD and adding HDMI drivers would be greatly appreciated.
    Thank you in advance for your assistance.
    Sincerely,
    Lisa

    Hello All,
    I have figured out the sound issue: System Preferences>Sound and choose the TV for output.
    Regards,
    Lisa

  • What to do?? -What to do?? - I just updated my iTunes to ver 11.2.1 because of the annoying messages they keep sending out. Now I can't play the movies and TV series I've purchased and were watchable before - This movie can be played only on displays that

    What to do?? - I just updated my iTunes to ver 11.2.1 because of the annoying messages they keep sending out.
    Now I can't play the movies and TV series I've purchased and were watchable before.
    Comes up with "This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection)."
    The cheek of the matter is everytime I tried to get Apple support it comes up with a request for me to pay $54 for their support package, to fix a problem I didn't have until I complied to one of their update requests.
    End of Rant!!! - Anyone know how to fix please?

    Well, I wonder about all the responses...:)
    Anyhow, I wound up "fixing" the problem by using the System Restore disks for the Mini. It's now running Tiger 10.4.11 (with all updates) and I copied my iTunes library over. It all works now. <shrug> I have no idea what the problem was, and I'm a bit leery of upgrading it to Leopard, so I think I'll just leave well enough alone.
    Richard

  • Consistently getting an error in custom reports "an error occurred" is the only msg displayed...my c

    Consistently getting an error in custom reports "an error occurred" is the only msg displayed...my clients are screaming...what is the problem?

    Hi,
    Please log a ticket with BC support for this issue. Please provide the exact steps, preferably a video. You can log the ticket from your admin panel > help & support.
    Kind Regards,
    Aish

  • How to get a copied transaction from MIR4 only to display??

    hi all, we have two transactions named ZZMIR4 and ZZZMIR4. Both are copies from MIR4, but the first one is for modifications and the other one is only to display....
    I use two registers in T169 to get this...ZZMIR4 has T169-TRTYP = 'V' so we can change invoices from this transaction and ZZZMIR4 has T169-TRTYP = 'A' so when you enter in this transaction you get the invoice in display mode...but the problem is that I can go through menus and do "edit-change" so I can modify the document anyway...
    What Can I do to force only display with ZZZMIR4???
    Perhaps using auth. object M_RECH_WRK??? if yes, then what activity I need to use to only allow display and what I can use to allow both change&display??? coz in se93 I set ZZZMIR4 with this object M_RECH_WRK and activity "03" but I can do "edit-change" anyway without problems....
    Thanks in advance...any tips would be much appreciated...

    Hi,
    in program SAPLMR1M, dynpro 600 in PAI you have MODULE exit_6000 AT EXIT-COMMAND.
    here you have:
        WHEN 'PPCH'.
          IF akt_typ = c_trtyp_a.
    *---------- clear existing buffer and read from database -------------*
    *---------- with lock for change                         -------------*
            MOVE rbkpv-rbstat TO f_rbstat_old.
            CALL FUNCTION 'MRM_PUFFER_REFRESH'.
            CALL FUNCTION 'MRM_INVOICE_READ'
              EXPORTING
                i_belnr     = rbkpv-belnr
                i_gjahr     = rbkpv-gjahr
                i_xselk     = 'X'
                i_buffer_on = space
                i_lock      = c_x
              IMPORTING
                e_rbkpv     = rbkpv
              EXCEPTIONS
                lock_error  = 1.
            IF sy-subrc NE 0.
              MESSAGE ID      sy-msgid
              TYPE    'I'
              NUMBER  sy-msgno
              WITH    sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
            ELSE.
              IF rbkpv-rbstat NE f_rbstat_old.
                MESSAGE i891 WITH rbkpv-belnr rbkpv-gjahr.
              ENDIF.
              CLEAR init.
              CLEAR init_6000.
              mir4_change = 'X'.
              LEAVE TO SCREEN 6000.
            ENDIF.
          ELSE.
            akt_typ = c_trtyp_a.
          ENDIF.
          CLEAR ok-code.
      ENDCASE.
    The key here seems to be variables init, init_6000 and mir4_change.
    See if you can do something so that when ok-code = 'PPCH' -> init = 'X', init_600 = 'X' and mir4_change = ' '.
    (Another option: you can create a variant for transaction ZZZMIR4 so that all fields remain as "display only").
    Best regards.
    Edited by: Pablo Casamayor on Nov 17, 2009 9:15 AM

  • IPhoto shows and imports triplicates (triple duplicates) of iPhone photos – On iPhone only single photos shown

    I recently plugged in my iPhone, only to see that when the contents of the device were shown in iPhoto, there were triples, or "triplicates" of every photo (this put the total around 10,000 photos). Meanwhile, on my iPhone's Photos app, everything looks normal with only single photos being shown.
    I toiled over how to remedy the problem, and found I had no other choice but to spend the MANY hours syncing thousand upon thousands of duplicate photos/videos to my iPhoto library. I then broke down and purchased Duplicate Annihilator to clean up my now ruined library. Because iPhoto made all those duplicates, the file size compounded into many gigabytes. Duplicate Annihiliator had to run for hours before finally cleaning things up. It did it's job well, however the root of the problem still remains.
    At the conclusion of transferring my entire library of photos from iPhone to iPhoto, I had the photos removed from the iPhone so I could start with a clean slate. I took a few sample photos and plugged the iPhone back in to iPhoto. Yet again, the dreaded triple duplicates, or "triplicates" of each photo I took show in the device preview window (i.e. I took 5, non-HDR photos, and 15 are shown—each repeated three times). If I proceed to import the collection, it imports triple of everything into my library.
    Essentially, my situation now is: I have to import multiple copies of everything (takes longer), then I have to run Duplicate Annihilator each time to keep my iPhoto library from being a mess. Just wastes tons of time. How can I keep iPhoto from showing and importing all these multiple copies every time? Again, on the iPhone end, everything looks normal—only a single copy of each photo.
    What I have tried:
    Closing/restarting iPhoto
    Checking for iPhoto updates (there are none, I'm on the latest version—which, as of this writing, is 9.2.3 629.52)
    Deleting com.apple.iPhoto.plist from ~/library/Preferences/
    Using Image Capture (triple duplicates still show in IC as well)
    Disabling Photo Stream
    Removing all photos and albums from iPhone

    I am seeing this problem still, even after trying the Photo stream toggle trick that was mentioned. I have one otehr observation to add.
    If I "Command"+select the first of each photo in iPhoto and then import those (choosing to Delete after import), then the next refresh of iPhone pictures oniPhoto will show all the photos (including the duplicates) gone. So basically something like this.
    1) iPhoto - I see triplicates of pictures on my iPhone.
    2) Command+Select the first instance of each duplicated picture.
    3) Import the selected pictures. Choose to Delete the pictures after import.
    4) Go back to iPhone in iPhoto. No more duplicates of the pictures I imported.
    So this doesn't fix the problem as all the unimported photos still show triplicates, but al least I don't have to run a de-duper on my laptop now to eliminate triplicates.
    This eliminates some of the hassle, but it's still a hassle.
    I hope someone figures this out completely because it's making me hate iPhoto just a little bit.
    Song

  • GET_P Method for Link in table - only in display mode

    Hello,
    i created an assignmentblock to display a ztable (Simple Object).
    One column in the table is homepage.
    For this attribute i added some coding to the GET_P_Method to have a link.
    The link works fine - but i have this link now not only in display mode but also in edit mode for the table.
    As a sideeffect this column is now longer editable.
    How should i change my GET_P coding so that the link is only there in display mode. In edit mode the field should be editable (no link).
    Thank you
    Best regards
    Manfred

    Hello Manfred,
    I do not know about your system... but the usual GET_P-methods do have an importing parameter IV_DISPLAY_MODE. This tells you if you are in display or edit mode.
    Check method CL_BT115QH__DETAILS_CN00->GET_P_ORDER_REASON.
    Or even more general: GETP_XYZ in your context node class.
    The part with the IF statement should be trivial.
    cheers Carsten

  • I want to use my Apple watch to time my patients' vital signs. The face only stays displayed for about 7 seconds. Can I change that?

    I want to use my Apple watch to time my patients' vital signs. The watch face only stays displayed for about 7 seconds, which won't work. Can I change that?

    Linda
    I am glad that bbqdevil's *workaround* will "do the trick"
    Did you give the Timer idea a try yet? It seems to me that you are really needing to know when a certain amount of time has elapsed rather than *time how long you have being taking a reading*. Will you always have your hand free to tap the Watch? If so, why would you need the StopWatch going? - just look again at the sweep second hand on the clock.
    It still remains that one should be able to set the time elapsed before sleep on a Chronograph w/ sweep second WatchFace though. I have searched and searched, to no avail.
    I would suggest Siri, but it seems like many issues with Siri are ongoing and might just add another problem to the mix.
    If I were you, I would Call Apple Support. It is sometimes tricky to get that option in the "breadcrumb" process Apple has instituted, but I was able to test the process before suggesting this:
    Click/Tap > https://getsupport.apple.com/GetproductgroupList.action
    Choose Apple Watch
    Choose "Setup & Usage..."
    Choose "The topic is not listed"
    Enter "set sleep duration" > [Continue]
    (I know this in not exactly right, but the point is to be vague)
    Pick your poison - I would ONLY choose to talk with them on the phone
    Rehearse an "elevator pitch" statement* for the Specialist that you get AND when you get no satisfaction (likely) ASK FOR A SUPERVISOR
    I have NEVER gotten an answer from a Level 1 Specialist - they are reading from a Knowledge Base not unlike all the resources available to us online
    I have ALWAYS gotten satisfaction from a Senior Specialist (sometimes pretty high up the chain - but always)
    Here's a sample "elevator pitch" that I actually sent as Feedback on the Apple Watch User Guide page
    I need to change the duration 'before' the Watch goes to sleep while observing the Chronograph Watch Face.
    I am a healthcare provider. I need to use my Watch to assist me in taking vital signs. On a normal watch, I would start counting pulses or respirations at a 15 second interval on the Analog Chronograph sweep second hand > stop counting at the next 15 sec. interval > multiply X 4 to get rate/minute.
    The Watch goes to sleep after SEVEN (7) seconds !! Therefore I cannot see when 15 seconds has elapsed.  I use both hands regularly in the procedure, so touching the Watch is not an option - or 'raise the Watch' to my viewing position.
    I, and others in the ASC forum have searched for a Setting for the before sleep duration in vain.
    Let us know what you decide.
    ÇÇÇ

Maybe you are looking for