Only sound from one out

Hey i have a sound blaster li've ct4830 and i have the correct driver installed but i can only get sound from one of the outputs in the back i tried hooking up different speakers but nothing works.......... if anyone can help ..............thanks

TOM546 wrote:
Hey i have a sound blaster li've ct4830 and i have the correct driver installed but i can only get sound from one of the outputs in the back i tried hooking up different speakers but nothing works.......... if anyone can help ..............thanks
Have you enabled the multichannel output on "speakers settings" (4/4., ..., whatever you got there other than headphones or 2/2.)?
jutapa

Similar Messages

TS2771 only getting sound from one side of the headset. Any fixes available?

I have an used Ipod touch. When i connect a headset, i only sound from one channel. Any fixes out there?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Moving sound from one clip to another?

Can I take the sound from one clip and move it so that it plays during another clip?
In other words, if I have some narration in one clip that would be better in another clip, can I pluck out that sound (narration) and re-locate it so that it plays at the same time another clip (video) is playing?
I know that FCP can do this..you just cut out the sound portion you want and cut/paste it into whereever you want, beneath the visual part of whatever clip you want it to play with.
thanks!
ray

Is it possible to take sound from one clip and put it in another clip?
Yes

Only sound from left with sum stack

Hello! When I create a sum stack this happens (only sound from left speaker:
But I want it to look like this:
All the tracks that I used to create Sum 1 worked perfectly (like Sum 2). What to do?

Hi
There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
The both another jacks provide only the function for signal (sound) receiving!
My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg

Can only connect from one direction

I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

Hi
Is the other person a PC user.
Tony

My macmail will only send from one google impap gmail server

Hi macmail mail will only load one outgoing GMAIL mail server. So I can load as many accounts as I want, receive mail in mac mail, but when i send mail it only comes from one of the outgoing gmail mail servers. The rest of the gmail mail servers show as being "offline."
Has anyone had this problem and how did you fix it?

Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

Only sound from my right internal speaker on my new hp stream X360 PC 11

hi, just opend my new HP Stream X360 PC 11 and it´s only sound from my right internal speaker. the system is updated and ive done the soundtest and the sound comes thru the right speaker even when i push the left speker test button.... softwere or back to the shop...

Were you able to contact Apple, about this issue, while under warranty?
If there is a hardware cause of the problem or other, they may fix it or
at least diagnose the underlying cause...
Your other post was changed into a new thread on its own, here:
•Popping sound from right MacBook Pro speaker
When posting in an old topic, your issue may not relate to the original
cause of the problem someone had a year ago with different hardware
and another build version of OS X.
Good luck & happy computing!

IPod touch audio issue: why do I only get sound from one channel in my ear-pods?

After upgrading my brand new iPod touch 5th generation to IOS 6.1.2 I only get sound from the right channel of my ear-pods.
I did not have this issue with IOS 6.1.1. Is this a problem derived from new IOS? Any idea on how to solve it?
Appreciate your help!

Have you tried other headphones? If you confirmned it is an iPod problem:
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Sound from one channel only + Apple Support

Hey,
I've had my 30 gig iPod 5G since February, and the sound only comes out of one ear (the right channel). To make the sound return on the left channel, i can do two things:
Pull the headphone jack out 2mm, but the music sounds much duller from both sides (I am not using any kind of case which prevents me from putting the headphones fully into the jack)
Or
Squeeze the ipod just below the bottom right corner of the screen.
Either of these 'solutions' didn't seem acceptable to me, so i can onto this forum to see what people have done. I then ordered apple online service for me to return the iPod. I put in the online notes about my problems with the iPod thinking that I would get a new one (like the previous similar problems).
I get my original iPod returned a few days later with some A4 sheets saying that there was 'No trouble found on iPod' and the diagnostic tests all went ok.
So... where does this leave me now? Do i send the iPod back, only for them to send it back to me unrepaired?
What can i say to apple to get them to look at my ipod a little more thoroughly??
Thanks in advance
30gig Black iPod Video Windows XP

hey,
much happier now!
managed to 'fix' my ipod myself! instead of holding the ipod together just below the screen, i squeezed a bit harder than i should have and the sound now comes out of both sides!
Who needs Apple support when brute force will fix anything!
if you're willing to do it, than i'd try squeezing the ipod front and back sides between the screen and 2 o'clock on the wheel.
hope that helps

Sound only plays from one application at a time

I've been having a problem recently with my laptop where it will play sound just fine, but only for one application.
Explained differently, if I try to start anything that would play sound, and if something else is already playing sound, there won't be any sound from the newer source, and if I want it to play sound, I would have to mute the first source and restart the second.
Another oddity to this problem is that I can work around this problem by first muting the first source, then starting up the second source, and un-muting the first. This can also be done with additional sources by muting everything that came before it. However, this does not work in every case, and having to do so everytime is rather tedious. I've looked for a few solutions already (Checking drivers, etc.) but nothing seems to work.
Laptop: Satellite L755D-S5104
OS: Windows 7 Home Premium Service Pack 1

Hi V07,
Here is what I've notice when Im playing a video sound using K-Lite Codec [Media Player Classic] then while the sound plays on the background. I started to play the game LOL (Leagua of Legends) and it provides me both sound the LOL and video sound with no issues.
I tried playing video using Media Player Classic and open another video using VLC Player both of this application works fine with no conflict. Both of the player provide good quality sounds.
You can try installing K-Lite Codec [Media Player Classic] and VLC player.
K-Lite Code for Win7
http://www.codecguide.com/download_kl.htm
VLC Player for Win7/Win8
http://www.codecguide.com/download_other.htm#videolan
Im hoping it will work to your laptops because on my Toshiba laptop it works perfectly.
BTW IF YOU THINK IT HELPS ALOT. PLEASE DONT BE AFRAID TO CLICK KUDOS star^_^
- cokies

Only hear sound from one speaker

I have been going nuts trying to find help on this. There were some but not exactly the same. So here is my dilemma.
I am capturing miniDV footage from my camera (Sony DVR PC 330) and used a Sennheiser MKE 300 Shotgun Video Camera Mike to capture audio. Then I captured in into FCE and also Toast 6. Both only produced audio on the left side. Now I checked the speakers, used headset and it was the same. I listened to iTunes and audio from other sources and both speakers and headset worked fine on both sides. Only bringing in from my camera did the sound from only the left speaker. So it's my camera or external mic. Well, I checked that too and I listened to the tape with headsets and heard everything fine on both sides. So the tape has all the audio. So could it be that the firewire is bad? Or is there something I have overlooked. Last week I imported a CD into FCE and produced a CD of audio that was fine. So the program is not at fault I would think. Any ideas would be great.
iMac G5 Mac OS X (10.3.9)

Panning on audio . . . . .>
The panning is set all the way to the left and shows -1. But this is the default setting. As when you click the little red (x) it will go to the left. And I just opened another project that works fine and it is all the way left with -1. If I move that sequence it sound less full with not bass or something, it just isn't right. So not sure this is the solution. And now I have to go out of town for a few days so will look forward to any other thoughts you all have when I return. Keep thinking
Jon

I can only hear sound from one side of the head phone

I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
only hear it from one side of the head phone. How to fix it!?

Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

HT201401 Only hearing sound from one headphone?

I only receive sound through one headphone, but have tried different headphones and the same problem exists. Any ideas on fixing the problem?

(Found this by another user)
"You simply need a replacement headphone jack. The problem is one of the contacts in your headphone jack (the metal that touches the plug on your headphones) got bent/damaged/etc. Replacing the headphone jack should do the trick.
You can probably get it sent somewhere for servicing as well. You also have various options of trading it in or selling it, etc.

I get only sound from left with 5.1 sound system on Satellite P100

Hi!
I have a P100-347 and a logitech 5.1 sound system.
The logitech 5.1 has 3 connection: 1 to be plugged to the Line-In, the other to be connected to the Line-out and the 3rd to be connected to the Microphone socket.
When using it on my desktop which has a random SIS sound card it works fine.
Yesterday I've connected it to the P100-347 but I only get sound from the Line-out socket. I have changed the sound preferences to 5.1 but it makes no difference... I only get sound from the Line-out. Is there any drivers update that I should do or is anyone aware of this and how can I fix it??
Just one more thing... With the laptop came this cd "Express Media Player Recovery CD", what is this? Is this something to be installed after runing the "Product Recovery CD" in order to install some drivers or whatever is in this cd comes with the Product Recovery CD as well? Does anyone knows?
Thank you.

Hi
There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
The both another jacks provide only the function for signal (sound) receiving!
My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg

No sound from Line out on X-Fi El

I have lost my sound from the Line Outs on a X-Fi elite. Or rather I can hear it but only if the volume is a 00% and then it is very poor quality. I have been using the Headphone Jack on the breakout box and this is my first time trying the Line Out. Can somebody tell me if the Line out is supposed to be a true low power Line out or is it capable of powering unpowered speakers or some small headphones. It seems to me that headphones should work fine from the Line out, so what do you suppose my problem is? I have checked the normal (IRQ, Drivers, default device, volumes, etc.). Any ideas? I'm running an MSI Nforce3 250gb board.
thanks...

mr. kat,
unfortunately, I don't have Playcenter -- I downloaded the file from Creative, and am met with the same message I receive when attempting to install Creative Recorder on win XP: nothing to upgrade, so no go on the install. I don't know how to get the data onto win XP in order for it to be upgraded. :0
I do remember there being CMSS back when I ran this device with my win98 computer, and that probably has something to do with it. I don't have EAX console either, but I do have the EAX Control Panel (aka Audio HQ) and there were no CMSS features there.
I have heard that one can use the SB Audigy installation with their SB Li've! cards and it will work -- have you heard anything to that effect?
Thanks,
mono

Only sound from one out

Similar Messages

Maybe you are looking for