Only sound in left channel

MSI KT333 ULTRA2 BA   (onboard AC97)
I have a problem. Yesterday i noticed that i had only sound in the left channel.??  I checked my cables and speakers , used a discman and they where ok.
Installed new, old, different drivers but no changes, still only left channel. Ok format C and TOTAL reinstall....
but still only left channel works.
Im using my sblive now but i would rather be using the onboard  since its better for me.
Any idea ??

i guess that youve tried other speakers and headphones and stuff.. it might be as simple as your onboard sound output might be damaged... if theres a glitch it usually results in only one speaker sound.. try gently to "swirl" the plug in the hole and see if you get 2 channel sound...
well its worth a try

Similar Messages

  • Airport Express only outputs sounds through left channel

    Recently purchased a new airport express.
    Sound is only audible through the left channel. Sound through the right channel is barely audible even at max volume (speakers and iTunes).
    Speakers are fine (they work fine through the stereo, iPod earphones also only work through left channel).
    If I turn sound enhance on and up to high, I can finally hear through the right channel, but only at about 40-50% of the left.
    Is this a software issue, or bad hardware?
    I've hard reset the airport express multiple times. Same issue whether wirelessly or connected via ethernet. This is running from iTunes 7 for Windows using a Linksys router.
      Windows XP Pro  

    Doesn't sound promising for the AX. Since it was
    recently purchased, do you have the option to visit
    your local Apple Store to either return it for
    replacement or, at least, have them verify the
    problem?
    The reason why I thought it might be software related was due to this effect of changing the sound enhancer, i.e by turning the sound enhancer on and setting it to high there was a considerable increase in sound output. If there was a loose connection somewhere I don't think I'd expect this behavior. It's almost as if the balance has been set all the way to the right.
    Given that no-one seems to have seen this problem before (other than a unresolved single old post on the Airport Express board), it does seem that you're right and the AX needs replacing.

  • Only sound from left with sum stack

    Hello! When I create a sum stack this happens (only sound from left speaker:
    But I want it to look like this:
    All the tracks that I used to create Sum 1 worked perfectly (like Sum 2). What to do?

    Hi
    There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
    If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
    The both another jacks provide only the function for signal (sound) receiving!
    My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
    http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg

  • Adobe Audition 3.0 only records in left channel

    Greetings!  I've got a Blue Yeti Pro mic hooked into an ART Tube MP Project Series USB pre-amp/interface (using XLR connection from mic - USB to computer).  When I record voice in Audition 3.0 it only records on the left channel for some reason.  I thought it might be the mic or preamp, so I downloaded Audacity to double-check with another program.  With Audacity I got a perfect 2-channel mono recording.  Any help on why Audition 3.0 is only recording on left channel would be appreciated.  I'm stumped.  Thanks!  Cheers!  mrc

    As you are only using one mic then, as you say, you should be able to record it in mono. Audition defaults to stereo so if you want to record a mono source you have to make sure that you have the mono input for your USB interface selected as source, not the default stereo one. Usually Audition list the stereo sources first in the hardware set up panel, so you need to scroll down the list of inputs to find the mono ones. Stereo ones are called something like Art 1 &2 S etc. and the mono ones Art 1 M and Art 2 M.
    Normally when recording a mono source it needs to be saved as a mono file using only one track, not as Audacity does which records a mono source onto two tracks and saving a stereo file which takes twice as much storage space.

  • Only the Front Left channel of my USB mic is being recognized!

    The microphone in question is this. When I plug it into my Macbook and look at it through Audio MIDI Setup, I can only see the Master channel and 1: Front Left. The Front Left channel was also greyed out, with the slider down at 0. When I record through the mic in Premiere, I (expectedly) get audio from only one channel. Could someone provide some insight?

    I hopped over to Windows 7 in boot camp and plugged in the mic. In Sound Options > Properties, it's also telling me that my microphone is only one channel. Did I purchase a mono microphone? Is it that all microphones of this nature record to mono? Or is mine somehow faulty? It would make sense that this microphone would be mono, but the fact that the one channel is named "Front Left" in the Audio Midi Setup might have sewn the seed of doubt that something was off.

  • Audio in firefox is only in the left channel

    whenever i play my composition in Chrome, it plays on both channels but whenever on firefox; it plays only on the left. Is there a solution to this?

    Hi Paolo,
    There is no know issue with edge animate audio channel with Firefox.
    Please try clearing browser cache and check again.
    Please also post a URL so that I also test the same.
    Regards,
    Devendra

  • Zoom R16 as interface - only recording to left channel

    So I'm a relative noob, teaching myself.  I'm using a Zoom R16 as an audio interface to record vocals into Audition CC using a Heil PR40 mic.  I'm getting a recording, but it's only doing so in the left channel in Audition.  I've tried it both setting up the track in stereo and mono, to no effect. What am I doing wrong?

    Very good.  Was able to do it in a multitrack session by clicking on the "Sum To Mono" button.  Thanks!  I've always just recorded my podcast directly into the Zoom, then transferred it over via the card, but I'm trying to set my system up to be able to record interviews via Skype, so I'm using it as an interface now.  Right on!  I'm sure I'll have more questions as I continue through this process!

  • MOVED: K8N No Sound From Left Channel

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=115851.0

    Can someone with more knowledge tell me if these two tables are telling me that my Antec P180 case front audio panel connector is working to a different standard to the K8N mobo? I have it connected with the Intel AC'97 connector. Thanks!
    At this point I would add the image if I could work out how to do it! So here is the text version;
    From K8N Manual
    PIN SIGNAL DESCRIPTION
    1 AUD_MIC Front panel microphone input signal
    2 AUD_GND Ground used by analog audio circuits
    3 AUD_MIC_BIAS Microphone power
    4 AUD_VCC Filtered +5V used by analog audio circuits
    5 AUD_FPOUT_R Right channel audio signal to front panel
    6 AUD_RET_R Right channel audio signal return from front panel
    7 HP_ON Reserved for future use to control headphone amplifier
    8 KEY No pin
    9 AUD_FPOUT_L Left channel audio signal to front panel
    10 AUD_RET_L Left channel audio signal return from front panel
    From Antec P180 Manual
    Pin Pin Assignment
    (AC’97 AUDIO)
    1 MIC In
    2 GND
    3 MIC Power
    4 NC
    5 Line Out (R)
    6 Line Out (R)
    7 NC
    8 Key (no pin)
    9 Line Out (L)
    10 Line Out (L)
    Pin Pin Assignment
    (HD AUDIO)
    1 MIC2 L
    2 AGND
    3 MIC2 R
    4 AVCC
    5 FRO-R
    6 MIC2_JD
    7 F_IO_SEN
    8 Key (no pin)
    9 FRO-L
    10 LINE2_JD

  • Only right and left channels work with external sound card

    Just got the USB Sound blaster xfi surround 5.. connected it to my laptop and connected to my home theather in a box using optical connection.
    downloaded and installed latest software but when I do a channel check I only get sound out of the right and left and even then it does not sound right.
    I have verified that my home theater in the box will play 5. with optical input and have verified with the built in test tones of the home theater that all speakers are working and correctly hooked up.
    The laptop is ruiing windows xp 3.
    Any suggestions.
    Thank you.

    Which S&V vi's do you mean to be dedicated to NI hardware?
    A quick peek into the addon show me waveforms as input and the sound vis have a waveform output.
    OK I didn't look at the examples and by habbit ignore the express vis .   But maybe you just want to use a program instead of programming your application?
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • Only sound from left speaker!!!!!

    Hi i have a HP Pavilion dv6 Notebook PC. only my left speaker works and if i try headphones only left works there maybe its my audio driver (IDT High Definition Audio CODEC) i really dont know plzz give me some answers!!

    To Start with, check in sound balance...to do that...
    Go to control panel -> Sound -> Double Click on Speakers -> Levels -> Balance...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • I get only sound from left with 5.1 sound system on Satellite P100

    Hi!
    I have a P100-347 and a logitech 5.1 sound system.
    The logitech 5.1 has 3 connection: 1 to be plugged to the Line-In, the other to be connected to the Line-out and the 3rd to be connected to the Microphone socket.
    When using it on my desktop which has a random SIS sound card it works fine.
    Yesterday I've connected it to the P100-347 but I only get sound from the Line-out socket. I have changed the sound preferences to 5.1 but it makes no difference... I only get sound from the Line-out. Is there any drivers update that I should do or is anyone aware of this and how can I fix it??
    Just one more thing... With the laptop came this cd "Express Media Player Recovery CD", what is this? Is this something to be installed after runing the "Product Recovery CD" in order to install some drivers or whatever is in this cd comes with the Product Recovery CD as well? Does anyone knows?
    Thank you.

    Hi
    There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
    If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
    The both another jacks provide only the function for signal (sound) receiving!
    My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
    http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg

  • Help I only get a mono audio in the left channel now

    I am only getting a left channel mono sound when rendering
    My videos with iMovie on my iPod Touch 4g 32 gb.
    My first iMovie came out fine with multiple clips and all in stereo
    I can find no help on the issue.

    They are either linked and/or a stereo pair.   If you see the name of the clip underlined they are linked...press "Command + L".  The undeline should go away.  If you see arrows on the clips pointing to one another then that is a stereo pair.  Press "Option + L" and the triangles should go away.   You can then use "Command + L" to relink you video with your audio...if you so choose.

  • Logic Express Presonus Firebox only left channel output in phones

    I upgraded from GarageBand. I have a 17" MacBookPro and a Personus Firebox. I configured the AudioMidi Preferences on the Mac to the Firebox for input and output. When I play back a mono track I only hear the left channel in the phones. I am panned to center. In GarageBand when I configure the Mac as the Audio Driver I hear my mono mix in both L and R phones which is what I want.
    Also, in Logic Express, I get no sound when I configure the audio out to the Mac. It needs to be routed to the Firebox.
    Any ideas?
    Thanks, Jonathan

    Thanks for the advice. I tried listening to a song from my itunes library, not using Logic and I still heard just one channel. The culprit must be a faulty connection in the Firebox.
    JS

  • Output only in left channel

    So I recorded a song and various instruments... everything was going great but I don't know what happened, suddenly sound was only coming from left channel and right channel only gets like reverbs and stuff. At the bottom only one of the bars is showing sound bouncing. How do I pan it back to normal?

    It could be that we're both missing something obvious that someone else would see.
    However, trashing Preferences (and to a lesser extent Caches) is a way to get rid of GB "ghosts" that mysteriously show up for no reason and mess things up. It often fixes mysterious problems that can't be fixed any other way (short of a complete uninstall and reinstall). When you get rid of preferences, it makes GB appear fresh to the computer. Caches are just temporary files - you can trash all of them and they simply grow back like weeds when you run the program.
    If you're concerned about the risk, you could put them into folders, put the folders into the trash, and restart your computer, but don't empty the trash so the prefs and caches stay there "just in case." Open up GB (it will look like it's being opened for the first time), and new preference files and caches will be generated automatically. However, you could always retrieve your old preferences and caches in the trash, and swap them out for the new ones (although it's really better just to trash the old ones).
    This won't effect your other projects and may not even help this one. However, it may fix the problem as this sometimes does fix ghost-in-the-machine problems, and is along the lines of housekeeping. It's refreshing some files that occassionally get corrupted, forcing the program to generate pristine new ones.

  • Only left channel records - help please

    Here's my set up. I have DVR with a bunch of movies. I am taking S video out and RCA audio out to a Sony DCR TRV 120 camcorder. This camera can act as a DV bridge. I am going out from the Sony via FW into my PB and trying to capture the movie in iMovie 5.0.2.
    Everything is working except that I am only getting audio from the left speaker on the computer. I checked the computer in iTunes and sound comes from both speakers. I checked the camera with headphones and there is sound coming into the camera in stereo.
    So, it must either be that I am losing the right channel via FW or the DV bridge in the camera.
    I have imported many movies from Hi8 tape without a problem. Is there anything I am missing here? Should try to go from the camera's headphone out to the audio in on the PB? Could it be a faulty FW cable?
    Is this a problem with iMoive 5.x? I have read this forum all night long and not found anyone else with the problem.
    I appreciate all replies.
    PB 15" 1.25 G4   Mac OS X (10.4.8)   Intel iMac 2.0

    "..I checked the computer in iTunes and sound comes from both speakers.."
    So the computer's audio is OK.
    "..I checked the camera with headphones and there is sound coming into the camera in stereo.."
    No: probably not real stereo; it may be the same mono audio coming out of both channels (left & right), giving you the same mono audio in both sides of the headphones. The camcorder may be trying to 'do you a favour' ..and, because it's receiving only mono, it's helpfully(?) playing the one incoming channel out of both headset channels.
    "..So, it must either be that I am losing the right channel via FW or the DV bridge in the camera.."
    No: FireWire is just a digital link which carries exactly what it's being fed - you can't lose a right channel via FireWire: it passes on exactly what it receives ..like handing on a cake to someone: the person who receives it from you wouldn't receive it with half the raisins or the self-raising flour or the egg missing ..it's all handed on complete.
    "..the DV bridge in the camera.." Well, as I said; I think you'll find that the camera is receiving only through its left channel, but is providing that left-channel audio out of both sides (..left & right..) of your 'phones.
    So the problem is probably at the very source: your "..DVR with a bunch of movies". Either the movies are recorded in mono, and that's leaving your DVR through only the left channel, or - even if the movies really are stereo - only the left-channel is active (..is connected properly, or has sound going through it..) from your DVR to the Sony camcorder.
    One way to fix this is to take the output from the left-channel of the DVR, and feed that to both the L & R cables which go to your camcorder. Use a 'splitter/joiner' like this..
    ..so you'd connect the left audio channel out of the DVR (..should be a white RCA/phono plug..) to the single pin of this adaptor, and then connect the pair of RCA/phono sockets on the back of the adaptor to both the left and the right audio inputs of the camcorder ..you may be using a 3.5mm jack plug to connect the phono plugs into the camcorder's input.
    This kind of little mono to both channels adaptor is available by mail order from most electronics stores, e.g: here, and the simplest place to find one in the States is probably Radio Shack, or that kind of store.
    It's a common problem..

Maybe you are looking for