Only the communication between PCs domain

Hello, I need to create a rule for that communication is only between computers dominoes. That is, if any other computer on the network that is not the field should not have any communication with the domain computers. How do I make this rule?
MCP - MCTS - MCTS AD

Hi,
As far as I know, there is not step by step guide for the Domain Isolation deployment published. However we can refer the following KB to realize the Domain
Isolation.
The related KB:
Introduction to Server and Domain Isolation
http://technet.microsoft.com/en-us/library/cc725770(v=ws.10).aspx#BKMK_3
Deploying a Basic Domain Isolation Policy
http://technet.microsoft.com/en-us/library/cc730709(v=ws.10).aspx
Domain Isolation Planning Guide for IT Managers
http://www.microsoft.com/en-us/download/details.aspx?id=16539
Domain Isolation with Microsoft Windows Explained
http://technet.microsoft.com/en-us/library/cc770610(v=ws.10).aspx#BKMK_2
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Email links out of Practice Fusion are not active (as they are in IE), which they say is a problem with "something lost in the communication between the Flash engine and the browser". Does anyone have experience with this?

    This is a medical records system, cloud based. I use Firefox to get into the system, but any browser would work. Other than this problem, Firefox works fine (better than IE, in my opinion).
    Patient demographics include their email, which is hyperlinked and should go right to Outlook (my default email program). This works in IE, but nothing happens on the click when using Firefox as the browser.
    I queried Practice Fusion, which replied: In regards to your previous question about the email hyperlink in the patient information, it looks this is not something that can be fixed on our end right now. It is the web browsers' responsibility to handle these types of links, and there seems to be something lost in the communication between the Flash engine and the browser. I apologize for any inconvenience.
    Thanks for any help anyone can provide.

    See if this helps you:
    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • What software/functions do I need to establish the communication between my C++ program and an instrument having only RS-232 (Singleton Cyclic corrosion Chamber CCT-10).

    I have Borland C++ 5.0 with NI-DAQ 6.9 driver for PC-LPM-16PnP, and want to synchronize DAQ initialized from C++ with a certain state of a Singleton CCT-10.

    You will need to use the RS 232 port on the computer, not the PC-LPM-16PnP. Use whatever serial functions Borland C++ provides.

  • The communication between DB and AP is suddenly broken off

    Dear experts:
    We are facing a Network problem between DB server and AP servers.
    When Iu2019m logging AP server on, sometimes Network communication error occurs. SAP log(SM21) output says u201CError calling the central lock handler >unable to reach central lock handler.u201D There is no PING responding, but OS is OK when I checked at serveru2019s console. No OS logs shows up.
    The problem has happened last September, and we could not found the cause of this problem. All OS patches were applied and changed network switches.
    Has anyone faced similar problem, please help us. Any information is welcome.
    Our platform is as follows;
    ・ Windows 2003 x64 SP2
    ・Oracle 10g (10.2.0.4)
    ・SAP NetWeaver AS ABAP 7.0 (ECC 6.0) and (SRM5.0)
    Our system configuration is as follows
    -     ERP
    ・DB x2 (MSCS)
    ASCS
    CI
    Web Dispatcher
    ・AP x4
    DI
    -SRM
    ・DB x1
    CI
    Web Dispatcher
    ・AP x2
    DI
    Any comments are welcomed.

    > Yes, it is a network problem. We try to figure out the cause of this network problem is server or SAP.
    If a ping is not responding then the cause can't be the SAP system. A SAP application such as a workprocess just makes use of the Windows runtime, it does not do anything on a lower area (like network) - it just uses it.
    > We have tried Windows firewall off many times, but the situation has not changed.
    Is this happening randomly or can you say it's occuring only on specific times? I think about data transfers taking place that are more than normal, a running backup or other things.
    I could think of doing some more network monitoring such as putting another machine on the same network segment, configure a promiscuous port on the switch so it receives all network traffic and then run a program such as Ethereal to see if you have a problem with the switch itself (it's software/configuration) or with the network card.
    Markus

  • How can i implement the communication between processes?

    the processes must run in the machine which has small
    memory,no harddisk and tcp/ip protocol.

    pipes and or shared memory, much faster than using
    sockets IMO.In JAVA??????
    You do not know what you are talking about please return to "Kindergarder Languages Topics" and
    don't confuse others.

  • Plse...help me on the communicating between CLEAN ACCESS MANAGER and Switch 3560E-24Ps by snmp

    Dear All,
    I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). Plse give me any suggestion to solve that problem. All configuration is as below:

    http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/412/cam/412_cam_book.html

  • Communication between : AP and WLAN controller

    Hi,
    The communication between AP and WLAN Controller is ( Data and Control ) UDP.
    Source port 1024 and destination port 12222 and 12223. Actually which device listen to which port or both should listen as control and data can be generated from both the devices.
    How does the user ( wireless client) traffic is switched - if user traffic is a TCP traffic. It will be sent to WLANC and then WLANC forwards it to respective VLAN or default gateway ( depending upon the destination in the packet ).
    Please explain / share the experience.
    any link on cisco.com
    Thanka in advance
    Subodh

    "the LWAPP Control and Data messages are encapsulated in UDP packets that are carried over the IP network. The only requirement is established IP connectivity between the access points and the WLC. The LWAPP tunnel uses the access point's IP address and the WLC's AP Manager interface IP address as endpoints. The AP Manager interface is explained in further detail in the
    implementation section. On the access point side, both LWAPP Control and Data messages use an ephemeral port that is derived from a hash of the access point MAC address as the UDP port. On the WLC side, LWAPP Data messages always use UDP port 12222. On the WLC side, LWAPP Control messages always use UDP port 12223.
    The mechanics and sequencing of Layer 3 LWAPP are similar to Layer 2 LWAPP except that the packets are carried in UDP packets instead of being encapsulated in Ethernet frames."
    Taken from "Cisco 440X Series Wireless LAN Controllers Deployment Guide"

  • Communication between HP eprint and Google Cloud Print

    Hi,
    the communication between HP eprint and Google Cloud Print seems to be broken. At least for me.
    The documents do get printed when I print vio Chrome browser or Cloud Print dashboard -- but the status in cloud print remains as "submitted". It seems like somehow the HP eprint status doen't get reported back to cloud print. In HP eprintcenter the log says "printed".
    Well, I wonder who will take care of this problem ...  (Hope it will not result in fingerpointing only ...)
    Thanks for your support!
    Best,
    George
    This question was solved.
    View Solution.

    Are you able to log back in later and the status at Google Cloud print update to reflect the true outcome of the print job? Or does it just remain as "submitted". Otherwise, if it is printing and showing in the log at ePrint Center (EPC) as printed, the issue would not be on the ePrint side but on Google's
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Communication between TNS_Listener and Apex Listener

    Dear all,
    I how does the communication between TNS Listener, Apex Listener, and Apex? For some reason I got the following error from Apex listener:
    Caused by: oracle.dbtools.rt.web.WebException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
    Caused by: oracle.net.ns.NetException: Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptorI truncated some of the Java object messages.
    This occurred when I tried to connect to Apex. Then I can fix this by going to:
    http://localhost:8080/apex/listenerConfigurethen, everything worked fine.
    My listener.ora file:
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
    ADR_BASE_LISTENER = /usr/local/oracle
    ADR_BASE_ORACLE_LISTENER = /usr/local/oraclemy tnsnames.ora file
    INARA =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = inara.snowdrop.com)
      )where inara is the instance name and firefly is the hostname.
    Does the order of whether starting TNS Listener first or starting Apex Listener first matter?
    Best regards,
    Val
    Edited by: Valerie Debonair on Aug 1, 2011 5:47 AM

    Hm, I'm not able to reproduce the error. There was one time when I started APEX Listener got:
    java.net.BindException: Address already in use: 8080=com.sun.grizzly.http.SelectorThreadHandler@46d999aand when I did the netstat -a got:
    root@firefly:~# netstat -apnl |grep 8080
    tcp6       0      0 :::8080                 :::*                    LISTEN      4530/tnslsnr  I had no idea what made 8080 tagged by the TNS listener, as I started it out before APEX Listener. Very curious how did this happen.
    There was one time netstat -a showed me this (this happened after I stopped Apex Listener, stopped TNS Listener, shutdown the database, started database, started TNS Listener, and started Apex Listener):
    root@firefly:~# netstat -a |grep 8080
    tcp        0      0 firefly.snowdrop.:22110 firefly.snowdrop.c:8080 ESTABLISHED
    tcp        0      0 firefly.snowdrop.:22111 firefly.snowdrop.c:8080 ESTABLISHED
    tcp        0      0 firefly.snowdrop.:22107 firefly.snowdrop.c:8080 ESTABLISHED
    tcp        0      0 firefly.snowdrop.:22109 firefly.snowdrop.c:8080 ESTABLISHED
    tcp        0      0 firefly.snowdrop.:22112 firefly.snowdrop.c:8080 ESTABLISHED
    tcp        0      0 firefly.snowdrop.:22108 firefly.snowdrop.c:8080 ESTABLISHED
    tcp6       0      0 [::]:8080               [::]:*                  LISTEN    
    tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22108 ESTABLISHED
    tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22107 ESTABLISHED
    tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22112 ESTABLISHED
    tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22109 ESTABLISHED
    tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22110 ESTABLISHED
    tcp6       0      0 firefly.snowdrop.c:8080 firefly.snowdrop.:22111 ESTABLISHEDWhat are 22108, 22107, etc? I cannot reproduce this either.
    Now I only got
    root@firefly:~# netstat -a |grep 8080
    tcp6       0      0 [::]:8080               [::]:*                  LISTEN    
    root@firefly:~# netstat -pnl |grep 8080
    tcp6       0      0 :::8080                 :::*                    LISTEN      5035/java   which is normal, right?
    Edited by: Valerie Debonair on Aug 1, 2011 9:43 PM

  • How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my comput

    How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my computer

    Something to Consider:
    If you are talking about "Avast!" Security Software, either the free or the paid version, the following may apply to you:
    There are three main levels of Security in the Avast! software:  Home, Work, and Public
    Home is the setting many people use when "at home", that is, connected to the home network.  The home network is sometimes defined as the "192.168" network:  these are the computers and printers that you have and use in your home environment.  The network is (most usually) private and (should be) secured with with a passphrase at your router.  The Avast! Software sees the "Home" network as a "safe" environment:  devices connected within the "Home" network are allowed to "talk" (communicate) with one another without undue restrictions.
    Work is the next setting.  The software places some restrictions on this level of communication.  Home users can certainly use this setting -- in many (most) cases, the "Work" setting is a solution that provides for communication and a bit more security for the home network and its devices.
    Public is the strictest setting and is meant to keep your computer safe in a public place:  the library, coffee shop, on a street corner.  Outside "prying eyes" are prevented from peeping and outside communications are restricted.
    If you have set (or left) your Avast! software set to Public, or even Work (and you do not know how to handle the restrictions), then you may have simply locked out the communication between the printer and the computer(s) on your home network.
    Open your Avast! Software and set the security level to either "Home" or "Work".
    You can find out more about how to use the software settings at the Avast! website.
    Advanced Users Only - You will  know if you changed the Rules... this is not something one does by accident.
    If you have changed the rules within the settings, you may have locked yourself out.  Make sure you have both "in" and "out" traffic settings adjusted correctly for each rule you change / adapt / add.
    Kind Regards,
    Dragon-Fur

  • Bidirectional Communication between SharePoint

    Hi Folks,
    I am pretty new with Sharepoint 2013 development but pretty familiar with SharePoint basic use (such as: creating a list, making a subsite, etc)
    So, here is thing. My company that I am interning with is currently having a Database issue of how to manage our employee informations. 
    Currently, how our database works is we are having a GIANT-LIST of Access Data table that contain all of employee information. It was managed by the head of our HR (OR Another department). So the
    HR manager can navigate through access table to look out for employee information. 
    Then, each of those employees have individual Sharepoint subsite. Inside each of these subsites, there are SharePoint List (or something) that contain only their information. 
    ---------------------THE PROBLEM IS-------------------------
    We would like somehow to connect each of these individual employee's lists from their subsite to main database. We are using SharePoint as a end-user interface. Basically, we want to create a CRUD
    website using SharePoint2013. But one employee can't look up other employee's information.
    I know there are several ways to tackle this issue. I would greatly appreciate it if you come up with any idea with resources of how to actually implement it. (Still newbies with SharePoint
    environment). The main thing that bugs me a lot is the communication between the SharePoint and some Database system.
    My questions are:
    1. We are thinking about making an SharePoint App that will connect SharePoint with Microsoft SQL Azure Database. Is this realistic approach?
    2. My partner has created Access Web Database as well. Is there some ways to connect that with SharePoint List etc?
    3. Basically the main problem is: I want to make some kinda of CRUD website. So when the employee update the information, it will be updated to the database as well.
    4. It can be anything, it's not stuck within SQL Azure Database or Access Web App.
    If you do have some solutions, please post the way of how to implement it.
    Thank you for your attention, looking forward to hearing from everybody.
    Best,
    Iskfendi

    Yes, It is possible using BCS but you will have to add some customization. But one of the limitations
    “Row Level Security”
    The point is that while SharePoint 2010 Business Connectivity Service has limitations, it does not mean your implementation should be limited. By understanding surrounding technologies like SQL Server, .Net you can achieve item level security and display
    external data as required.
    Refer below article to set item level security.
    http://www.pdfshareforms.com/business-connectivity-service-with-item-level-security-and-pdf-forms/
    http://sharepointpromag.com/sharepoint/6-lessons-developing-business-connectivity-services-solution
    Hope this will help you
    Senthilrajan Kaliyaperumal

  • Communication between Edge and Transport servers in Exchange 2010

    hi,
    Its a strange communication error that I'm having here, though there are no service outages observed till now.
    When I try to test-servicehealth from any HUB server to any Edge server, it always says some error (refer the error below), but the services are all running perfectly fine. even restarting of RPC service and WMI service not helped either.
    likewise when I run get-exchangeserver -server <edgeserver> | fl name,*exchangeadminversion*, this result shows exchange version is 14.2, but the actual version of Edge server is 14.3 (SP3 with RU8. 
    This means the communication between my Edge server to other exchange server having some issues? or is it a conman behavior that i no need to worry?
    Error message:
    Couldn't get information about the Exchange services using Windows Management Instrumentation (WMI) due to error: WMI e
    xception occurred on server 'Edgeserver.domain.com': The RPC server is unavailable. (Exception from HRESULT: 0x800706B
    A)
        + CategoryInfo          : ReadError: (:) [Test-ServiceHealth], ServiceHealthWmiFailureException
        + FullyQualifiedErrorId : EBBF3409,Microsoft.Exchange.Monitoring.TestServiceHealth

    I think I got an answer for this question.
    The version number displayed is the one that was written to Active Directory at the time the Edge subscription was created. Because EdgeSync is a one way process, the version number does not update as you update the Edge Transport server to newer versions.
    If you want the version number to reflect the current value, recreate the Edge subscription

  • Maximizing communication between objects.

    Hi,
    I have a question concerning communication between objects. Particularly I want to learn to maximize communication between objects. Obviously there are several ways of increasing communication between objects, unfortunately I only really understand one methodology, which is as follows:
    For example:
    If I were to create an object called GUI of class UserInterFace, like so
    class UserInterface extends JFrame
      private variable1;
      private variable2;
      UserInterface()
        setBounds(x,y,width,height);
        setVisible(true);
    }I could then create an object called fileOps of class FileOperations and pass the entire GUI object into the constructor of the fileOps class, as follows:
    class FileOperations
      private FileReader input;
      private FileWriter output;
      private UserInterface GUI;
      FileOperations(UserInterface GUI)  //GUI object introduced.
        this.GUI = GUI;
    }By following the code fragments above it becomes obvious that I can establish communications between the fileOps object and the GUI object. With code similar to the above; fileOps will be able to access all of the accessor and mutator methods within object GUI. Using the above methodology always requires making all variables private and accompanying those variables with public methods (thus preserving encapsulation).
    If anybody can suggest any other methodologies for increasing communication between objects they will be greatly appreicated. Of interest to me is how one can go about ensuring complete two way communication between objects, my example above is rather one sided (fileOps can see GUI, but not vice versa). Obviously the instantiation of objects must occur in some procedural sequence, I want to know how to capitilize on this. Suggestions to read a particular book will be appreciated, however suggestions born from peoples experiences are most desired. Thanks.
    Regards
    David

    Rommie and Rajesh,
    Thank you both kindly for sharing your time and valuable knowledge. As I have only been programming with Java for a year part time (as one section of a Computer Systems Diploma) I consider myself to be a beginner in programming terms. I want to do really well with Java as quickly as possible and you have both helped me tremendously.
    Rommie the methodology that you have passed onto me is great, thankyou so much, I feel like a new section of Java has completely opened to me. I will be using the third "reference" class methodology from everyday now on.
    Rajesh your words are encouraging, and I will be reading up on Hierarchy and Aggregation immediately. When you said "Before using either, decide on the existence of the object, its intended functionalities e.t.c. ...", could you please explain with an example as to where Hierarchy is desirable and where Aggregation is desirable.
    Please feel free to e-mail me with further suggestions if you come up with something else that aids in the communication between objects.
    E-mail: [email protected]
    Thanks again.
    Regards
    David

  • Communication between subscreens

    Hi there,
    I got a question concerning the communication between subscreens.
    Let's say I got a dynpro 9000 which contains 3 subscreens 9001, 9002 and 9003.
    Those three are loaded at the PBO of 9000 with
    CALL SUBSCREEN sub1 INCLUDING sy-repid '9001'
    and so on.
    When PAI is triggered in 9001 for example, is it possible that only the PBO of 9002 is triggered and not that of 9003? The problem is, that the PBO of dynpro 9000 is triggered again which triggers all subscreen PBO's of course.
    How can i solve this?
    Thanks in advance!
    Regards,
    Tobi

    Hi Tobias,
    I guess you want to suppress one of the subscreens if certain condition is met, right? For doing so you, do the following:
    Create empty screen 9030 which you would switch with 9003 if some condition is fulfilled
    "in program
    data: dynnr(4) type n value '9003'. "by default 9003 is displayed
    "in program, PAI module
    module PAI_9000 input.
    if condition = true.
      dynnr = '9030'. "switch your subscreen so it will not be shown (empty will be placed instead)
    endif.
    endmodule.
    "in screen flow logic
    PROCESS BEFORE OUTPUT.
       CALL SUBSCREEN sub1 INCLUDING sy-repid dynnr. "depending on DYNNR content either screen 9003 will be shown or empty 9030
    If, on the other hand, you want to suppress PBO module (only operational statements like setting default values in screen fields) but still show entire 9003 screen, just place your condition in PBO module (in program) of screen 9003.
    PROCESS BEFORE OUTPUT.
       CALL SUBSCREEN sub1 INCLUDING sy-repid '9003'  "call PBO of screen 9003
    "in program, PBO module
    module PBO_9003 output.
    check condition = true.
       ...."statements if condition is true, i.e. setting default values on screen
    endmodule.
    Generally, you can't put any conditional statements in screen flow logic, put you can control its behaviuor using dynamic subscreen assignment as in 1 case.
    Regards
    Marcin

  • Design question: Communication between objects

    Hi all,
    Just interested in some opinions from your experience. If you have two components, say two GUI components which are repesented by two separate classes, and you need to have these classes communicate in a relatively small way, how would you do it?
    What I've done is passed a reference of the second object to the first.
    I guess I'm wondering whether this would be considered a reasonable design, or should there be some in-between class which manages the communication between objects.
    For a more concrete example: I have a main class (with my main() )which is a JFrame, and this frame has a split panel. I want the left and right sides to communicate with each other. Should I handle the communication through my main class, or should I "couple" the two classes upon initialization and let them do their communication independent of the my main class?
    Thanks for any opinions or comments.

    >
    When the user selects a node on the JTree, I want to
    populate a particular ComboBox on the right based on
    what the user selected in the tree. Or I may just
    re-initialize the entire right component based on the
    selected node on the JTree.
    I guess I was wondering whether I should "marry" the
    JTree and the JPanel class, and let them do their
    communicating when needed, or whether I should manage
    the communucations through the JFrame class.
    For example, say I use the JFrame as a "message
    manager". The JFrame class will listen for events
    from the JTree on the left side, and then send the
    appropriate information to the right side. This way
    the JTree class and the JPanel class would have no
    knowledge of each other. They are glued together
    through my JFrame.
    Thanks for your opinions.
    Then you must register a selection listener with the JTree with addTreeSelectionListener this listener has a reference to the combo. The listener can be a new class (inner class or anonymous) used only for this purpose.
    Bye.

Maybe you are looking for