Only the "first section" of CC notes is shown on each slide.

Hello,
I have a lot of TTS and CC notes in my presentation. Although, the box of every "CC note" section is clicked, the CC notes don't proceed beyond the first section. I have looked at the CC timeline, and the second second should begin at 13 seconds, the third at 19 seconds, and so forth. During playback, the only the first section is shown for the entire slide. Any ideas as to what could be wrong?
Thanks for any help!
Ryan

OK. Then something isn't quite making sense for me here.
I just performed a quick test readin of the first line of CC text showing in your screenshot and it came out at 30 seconds. So I cannot see how the TTS text voice (which is usually slower than mine) would come out at only 14 seconds or so. It would have to sound like a chipmunk to fit that amount of text in the time frame you say it is using.
My guess is that the CC text is not appearing perhaps because you have far too much text in each line.
Try breaking up your text in so smaller chunks. For example, here's a screenshot of the module I'm currently working in. I always set my CC text up so that no more than one line is visible at a time.
I have the CC options in the skin set for the CC section to be 3 lines high and the text is as shown below:

Similar Messages

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Short Slo Mo video imported to Aperture or iPhoto via cable (Air Drop not supported on my iMac): only the SloMo section imports. Not the rest. Any fixes?

Okay, as I'm working through this I see that I have to add the "Admin" account to each file with "read only" permission. Simply changing the "everyone" account access does nothing.
So how do I change the permissions settings in iPhoto or Aperture to give each exported file the desired permissions? I cannot locate a setting in the iPhoto or Aperture applications.
Also, I added a password to the user account. It did not change how files are output.

In my itunes library I have apps for the ipod. All of the apps were together, and now I have two different sections to my apps. The first one says 44 apps and the second section says 143 apps. When I connect my ipod only the first section goes on

can anyone help me with my apps on my itunes. They have separated for some reason. I have one section of 44 apps and the other has 121 apps. Only the top section will sinc with my ipod because at the side where it says apps, it is only showing the 44 apps and not the section at the bottom

Can you take a screen shot of the iTunes screen and post it? I do not really understand what you mean by different sections.
What model iPod and iOS do you have? Maybe the section that does not sync are not compatible with the iPod.
Were all the apps purchased with one account?
Do you have any Restrictions one that would prevent syncing? Settings>General>Restrictions.

I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

Was your Bootcamp info.plist manipulated to change any options?

I was setting up my Airport and thought the first set up did not go through, so I set up again and I ended up with two accounts instead of one. How can I manage to have only one account now? Thanks for the help.

I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!

me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders).

When downloading a file, only the first word of the attached file is included in the 'file name' field, not the entire file name, as it used to.

Regardless of filetype, only the first word of the file is filled into the "Enter name of file to save to..." dialog box. I'm set up to 'save file' in the FF Options > Applications tab for the basic MS and Adobe files. To successfully use/find the downloaded file, I type in the remainder of the file name. Have I overlooked an additional setting? Running FF 18.0 on a Win7 PC.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is that the server sends a wrong response header.
The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
* https://developer.mozilla.org/en/Firefox_8_for_developers#Network

PDF only showing the first section

I've a interactive adobe embedded in my abap webdynpro that hides all sections except the 1st section onload(using JavaScript). However there's a "View All" link which will set every section to visible.
After "View All" link is clicked, all the sections can be seen and decided to save the document by clicking on the Standard Adobe Save button in the adobe. However after saving the file, when I open the PDF file, only the 1st section can be seen and not all the sections.
Have anyone encountered the same issue before?
Please advise.
Thank you.

?

HT203175 My Ipod does not sinc with all of my Itunes library, only the first few albums. I recently changed my operating system to XP from Vista, which was a pain, and due to my fault had to reinstate most of my albums and all of the playlists.

Ipod does not sinc with all of my Itunes library, only the first few albums. I recently changed my operating system to XP from Vista, which was a pain, and due to my fault had to reinstate most of my albums and all of the playlists. How do I get my Ipod to sinc fully when I access Itunes?

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

Downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem)

downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem) and none in the download window
used ff19
with
Download Statusbar v0.9.10 by Devon Jensen
UnMHT v6.2.0 by http://www.unmht.org
DownloadHelper v4.9.14
had to revert to ff18.0.2

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
Did you try to disable other extensions?
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

My fire fox download helper not detected current video on you tube. It's always shows only the first video which i was downloaded.pls help

You need to refresh the page (F5) to update the items in the download menu. Apparently YouTube refreshes the page in such a way that the extension doesn't gets notified, so you need to refresh the page manually if you want to download a media file from this page.

HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI???

Question
HAVING A PROBLEM WHEN I PRINT A WEB PAGE WHICH IS MORE THAT ONE PAGE LONG. ONLY THE FIRST PAGE PRINTS TO SCALE...THE REMAINING PAGES PRINT OFF THE PAGE????HELP-IT IS DEFINITELY A PROBLEM WITH FIREFOX BECAUSE IT DOES NOT HAPPEN WITH SAFARI??

Thank you for the response. I tried to fix the problem with some of the suggestions on that page, but none seem to work. I believe that is the only website that I'm having that problem on. I got to fooling with it a bit more and when I highlight the whole page and select to print the selected area, it actually prints the whole page then, but it won't do it as a default. I guess I can just do it like that from now on, but I thought there would be something in the settings that I could have changed. Thanks again for the help.

Some images do not display in browser, iPad Air 2. When I load a page with several jpgs (one 1920x720, then 8-10 800x800px), only the first few are shown. Behaviour is similar for Safari and Chrome. Website issue or iPad?

I have just bought an iPad, partly to check that my websites work OK on mobile devices. When I load a page with several jpgs (e.g. one 1920x720, then 8-10 800x800px), only the first few are shown. If I remove the large one, that sometimes fixes the problem. Behaviour is similar for Safari and Chrome. Is this a website issue or iPad?

Sorry, I didn't make myself clear. I'm using a new Wordpress theme that is meant to be responsive. The large image is for a header, than you scroll down to see the rest, one by one. Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500. It's the new pages and those I've updated that are causing the problem. On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
Here's the website with its new theme: http://www.new-zealand-pictures.com/

Capturing only the first vendor code (not all) associated with user

Hi All
I have several tables that helps me try to capture the unique number of vendors that are active from the users table as shown below in the SQL script. However, ther is an exception where users may be associated with multiple vendors. I feel that my script captures all associated vendor codes associated with my users. Is there a way of capturing only the first vendor code associated with the user. Thanks for your help.
Gautam
SQL SCRIPT:
select count(distinct(d.vendor_id))
from SSPE.PG_FORM_SUBMIT a, SSPE.SP_USER_AUX b, sspe.pg_supplier_vendor d
where a.SOURCENAME = 'wvInventoryForecast' and
a.PROFILEID = b.ID and
b.SUPPLIER_ID = d.supplier_id and
a.CLOCKTIME between to_date('15-Mar-06','DD-MON-YY') and to_date('04-Apr-06','DD-MON-YY')

you need to have a common criteria to determine which vendor should be selected for an user, if it is by lowest vendor code or if it is the first entered vendor in which case you should have a date (or someother) column to identify which vendor was first associated with the user. In either case you could use the analytic function row_number() to accomplish what you want to do. here is an example
select * from (
select user_id, row_number() over (partition by user_id order by vendor_cd) rn, vendor_cd
from user_table, vendor_table
where <condition>)
where rn=1;
refer online docs for more details on this function (link provided in my earlier post)

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

"Pie chart in pivot view showing only the first column's results" in obiee

Hi,
In my pivot view(pie chart view+pivottable),i'm getting only the first column's result in pie chart..
I have added a column named *'A*' in rows and '*moneyspent*' in measuresfield and the '*period*' in the columnsfield in the pivot view.I'm calculating the sum of
the rows and columns..
I'm not getting the sum valueof moneyspent in the pie chart..instead i'm getting only the first column of period in the pivot table in the pie chart.
can anyone tell how can i get the sum value of pivot table in pie chart?
Thanks in advance..

Hi Prash,
let me try to give you an example based on the paint sample:
Use Markets.Region, Products.Brand, 'Sales Measures'.Units
choose a pivot view to display the result: region goes into the rows-section, Brand goes into the columns-section and Units into the measures-section
In the columns-section add a total using the 'add total' at 'Measure Labels' level
the result is a total column on the right side of the pivot.
looking like this:
Units
Brands
Region Enterprise Magicolor Mccloskey Valspar Units Total
Central 1032.....
Eastern 1485......
Southern 824.....
Western 580
What I am looking for is a new column 'Units Total pct'.
If I duplicate the measure to show the values in percent, I'll get a second column per Brand (showing the absolute and percentage values) - that's what I don't want
Regards
Andy

Only the "first section" of CC notes is shown on each slide.

Similar Messages

Maybe you are looking for