Only the safari element of the ipad has locked up, how do i restart
I purchased my IPad 2 early August 2011 and it has developed a problem. All elements of the iPad are OK other than the SAFARI bit which has "locked up". How do I re-start?, any ideas anyone?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
My ipad is disabled and it tells me to connect with itunes. i cannot connect to itunes bc it says i need to enter my passcode. the ipad is locked up. how do i correct this?
If you do not have the password, you can only do a restore-resetting the iPad to factory condition.
-
having attempted to upgrade to iO7 latest op system,the Ipad has stuck on the Terms & conditions page.It will not accept my agreement to terms and conditions or allow me to read them.
Ideas please on how to get it to work again,which will have to be via my lap top!
It sound as if the iPad is woking in the background-i.e.receiving eMails.Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Please help, and forward the answer to [email protected] as well.
Thanks.Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I just purchased the iPhone 5. The screen is now lock and "Siri" keeps talking to me. How do I unlock the screen and make Siri go away?
I tried simulating and checking the installed PD files and found out the due to the security setting set for Panther, upon installation Palm Conduit installer changes the ownership and permission settings of some Palm folders to Read Only. The Palm Desktop Installer requires these folders have Read & Write access. That is why problems occurs even after seeing complete installation. What I did to correct this is uninstall/reinstall not just once but many times til the complete Palm files were correctly installed to its designated system files.
-
My iPad has locked so the screen doesn't rotate!? How do I un lock it?
My iPad has locked so the screen doesn't rotate!? How do I un lock it?
when you flipped the switch did the roation icon appear in the middle of the screen for a moment?
one thing you can also try is...
Try doing a hard reboot
1. hold the power and home buttons down
2. you will see the "swipe to turn off" screen come up... KEEP HOLDING THE BUTTONS
3. The screen will go black (turn off)... KEEP HOLDING THE BUTTONS
4. A white Apple logo will appear on the screen, now you can release the buttons. Let the iDevice boot... should only take a couple minutes. -
My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
My Ipad has locked itself up and is posting the followning message: iCloud Backup This iPad has not been backed up for 2 weeks.... I've plugged it in, it should be connected to rgour home wi-fi, but I cant get the message to go away when I push OK. I cant get it to do anything. It is fully charged, but I can't even turn it off (won't let me), Just continues to post the iCloud Backup message.
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
The iPad has a bruised hand, the screen freezes sometimes buy it 4 months ago and I wonder if I can change the other as it has warranty and I have to keep the receipt?
Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the iPad repaired at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Cheers, Tom -
I've updated my Ipad to IOS 7,0, the problem I'm is the Ipad has been updating Icloud settings for the past two days and it's not allowing me to do anything else. How do I cancel the Icloud update?......HELP
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
I purchased an Ipad mini in Thailand in first week of July. Now the screen of the ipad has lost its brightness and smells like somethings burning inside when switched on. I am in Dubai now and want to know if I can have it exchanged here in Dubai?
Contact support and ask them. http://www.apple.com/support/contact/
-
Hi, I am trying to download IOS7 (not sure if it's 1 or 2) to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks
Hello Den53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430?viewlocale=en_US
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
Best of luck,
Mario -
My Ipad has locked in the on position --shows icons but will not function--cannot turn off either---battery is fully charged--can any one help please
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
When i try to sync photos from iPhoto to my iPad using iTunes, the "Selected Folders" option is greyed out with only the "All Folders" option available, how do i change this?
I add the keyword 'sync' to any photos I want added to the iPhone/iPad.
Then, during the regular process of syncing the iPhone/iPad with my computer (mac), the photos with that keyword would be copied onto the iPhone, iPad.
I've been doing it this way ever since I was shown how to; ie after I got my iPhone 2 years ago. And every time the process worked - until the last few weeks. Suddenly it doesn't do it any more.
I believe I have upgraded software (either iTunes or iPhoto or both) during this period. I try to keep my software updated but have noticed previously that the new version often is disappointing.
I've not tended to use Smart albums much.
MM -
my iPad is disabled.
i connected it to the iTunes, but the iTunes couldn't access it; because the iPad has a pass code.
i can't enter the pass code in the disabled iPad!
do you have any suggestions?You can unlock it on another computer though the content will be wiped and I think that you need to put it into DFU mode e.g. see post https://discussions.apple.com/message/15385719#15385719 in thread https://discussions.apple.com/message/15385641#15385641 .
From http://support.apple.com/kb/HT1212 :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
Maybe you are looking for
-
Can we use 0INFOPROV as a selection in Load from Data Stream
Hi, We have implemented BW-SEM BPS and BCS (SEM-BW - 602 and BI 7 ) in our company. We have two BPS cubes for Cost Center and Revenue Planning and we have Actuals Data staging cube, we use 0SEM_BCS_10 to load actuals. We created a MultiProvider on BP
-
Dysfunctional customer support
Inclined to Investigate other software I was rather proud of using Adobe Creative Software for my creative photography and (more avocational) creative graphic design workflows. I was happy to use the acknowledged industry standard and impressed with
-
Problem Installing Snow Leopard 10.6.3
Hi I have a Macbook Pro 15" from about 2008-09. I have a 2.4 GHz Intel Core 2 Duo Processor and have 2GB of RAM and meet all the requirements for Snow Leopard. I recently purchased a retail version of Snow Leopard 10.6.3 from Apple and am having issu
-
How to define the margins of a leaf in numbers 3.2
how to define the margins of a leaf in numbers 3.2 leaves appear without margin and not when moving from one sheet to another
-
Hey, Does anyone know how to pass a variable (string) from one swf to another if there in separate html pages? I assume I'd have to send the variable from the first page and load it into the second but I don't know what functions or code I should be