Only the wireless is not working on WRT54G Router

I have been using this wireless router for a while now. We had a snow storm couple of days ago and since then the wireless portion of it is not working. I have Vonage and other power adapters connected through the other ports. All of them work fine except for the wireless. I have been trying on 2 laptops and the cell phone but had no luck even after doing a hard reset on the router. Any ideas would be greatly appreciated.

Snow storms do not affect wireless connections. We have close to a meter of snow on the ground. Temp -22 with windchill -30 does not affect my wireless connection on a WRT54G router. You may have had a power faillure or power surge that killed your router. Make sure your wireless is set to enable, Use a unique name for your network. Do not use Linksys as your network name. Enable the wireless switch on your laptop.
Greetings from Northern Ontario, Canada

Similar Messages

My iphone 5 is water damaged but its only the screen thats not working i cannot do anything except hold the home button which makes the siri noise,i put my phone in a bag of rice for like 20hrs and its still in their is there a way to fix the screen?

what should i do please someone help me, I live in UK so how much will it cost to get a screen replacement or will they just replace my phone? but its just my screen so yeah please help. its in a bag of rice and it works fine only the screen is not doing anything and when i press on the screen i see like a white ish blob. will my phone die out or will it just be normal but the screen not functioning

The damage has been done then
Take it to Apple and pay for a replacement
Here in the States a replacement cost $229
Allan

Arris Cable Modem not working with WRT54G Router

I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them. Any help GREATLY appreciated!
Thanx!

ok man, good new and bad news. Good news, i know what ur goin through cause i have the exact same problem. Tried a new router too (wrt54g to no avail). Bad news i have no idea how to fix it. I've tried everything. Linksys tech support hasn't emailed back after their originaly fix which did nothing. Please PM me if you get any ideas. Ps Have you noticed that when the setup page times out you can't get an ip wirelessly. Also, my temporary fix is power cycling. Somtimes it works for a few days, or sometimes a few hours.
[Mod Note: Email address removed. Get in touch through PM for details.]
Message Edited by OnnagokorO on 09-25-2007 08:45 PM

I updated the Ipad mini to IOSx 6.0.2 and now the wireless does not work,

Hi
   when I try to connect my Ipad mini to any network, The message is: "Unable to join the network". do you have the same problem?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Setting Up LG Wireless Adaptor to work with WRT54G router

My parents recently bought a High Def LG television and they got a wireless LG Adaptor for it (AN-WF100). My brother was able to insall it, but when we try to connect to the router, we get an error message saying that DHCP needs to be enabled. From what I can see when I go into the router settings, DHCP is enabled. We are pulling our hair out trying to figure out what settings we need on the router to make this work. We have tried both setting up the connection automatically and manually with the IP, Gateway, etc. I don't know what other information is needed, but I will provide further details if anyone has any ideas. We also have two applications set up under the Applications and Gaming tab (Nintendo DS and Wii). I don't know if that could be interfering with anything. Any help would be appreciated!
Solved!
Go to Solution.

LKKelly wrote:
I believe I have the same issue. New router, new LG 550 with WIFI Dongle. Router works with everything else but TV cannot connect. I'm receiving same message as Marie. HOw/where to I find and correct the WEP to WPA?
Thanks!
The WEP/WPA was set by the one who configured the router. Make sure you are entering the correct character and it is case sensitive.
Yesterday is history. Tomorrow is mystery. Today is a gift.

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Time Capsule not working as a router

I've done a search, but can't find anything that jumps out to me as the same issue.
I've recently ditched all my PC gear. Now have the following:
Mac Mini
2TB Time Capsule
MacBook Air
iPad
My issue is with the internet connectivity of the Time Capsule. I have the mac mini connected via Ethernet. It can get on the internet no problem. None of my wifi devices can at all. My ISP only allows two devices to ping out, and they need to be registered via MAC address. No big deal, except my Time Capsule isn't functioning like a router. So, the MAC address of my Mac Mini is registered, and it's working, but I can't register the Time Capsule. I'm pretty sure I'm missing something easy, but can't for the life of me figure out what it is. Figured instead of banging my head against the wall, I'd see if anyone had something similar happen to them?

Register by MAC address to the first device is generally used by cable companies. But the Modem acts as the first port of call and whatever device first is turned on, picks up the public IP address and the MAC is registered. It just works.
Your issue might be that the first device to register has a very long lease. Since you cannot power cycle you should ask the IT admin of the building who controls this setup to release and renew the IP after you plug in the TC otherwise it will not be recognised.. for days or weeks or however long the lease is set to.
But it could be 24hours.
Plainly you got the Mac Mini working.. how did you do that??
Sometimes you can just try overnight.. remove the Mac and plug in the TC.. but it is far easier to talk to the admin and get him/her to simply renew the lease.
The other method we use is spoof the MAC address of the device currently plugged in. ie grab the MAC address of the Mini and use it in the router.. to pretend it is really the Mini.. the router on the other end is none the wiser.
TC AFAIK, has no ability to spoof, but almost every other broadband router made can do it. Apple designed it for lowest common denominator in terms of networking ability.. to put it mildly.
Note your internet might be already behind a NAT.. if you use the TC or any other router in NAT mode there is an issue of double NAT with every site that requires interactive connection because there is no possible link from the site to your PC by forwarding the port. Double NAT effectively blocks it.
Check the IP you have on the Mini now.. if it is a private address.. ensure it is not 10.0.x.x by the way otherwise the TC will not work due to routing considerations. But any of the private IP address ranges are not routable over the internet and will give you issues.
http://en.wikipedia.org/wiki/Private_network

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for thos

Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?

Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well...

HT201401 The sounds are working on my iPhone but the ringer will not work...it only vibrates on incoming calls. Volume is set high.

The sounds are working on my i phone but the ringer will not work...it will only vibrate. I have the volume set at high.

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
Have you tried ALL the troubleshooting steps? If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange.

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first p

I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first place can someone please explain and tell me how to make it work again

Sorry first time asking question didn't mean to write same thing twice well copy paste

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Same problem here on my 4s: Control center music controls do not work.
Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

Only the wireless is not working on WRT54G Router

Similar Messages

Maybe you are looking for