Only top field could be see

Hello,
Following is my step.
1. install netweaver 2004s (ABAP+JAVA)
2. config SLD
3. config IGS
4. using SDM to deploy Virsa Compliance Calibrator
5. config Jco
6. connect
http://hostname:50000/webdynpro/dispatcher/sap.com/grc~ccappcomp/ComplianceCalibrator
After input the user name(j2ee_admin) and password, I only could only see the top field(only could click 'about', 'help', 'log off').There is no tab of 'informer','rule architect' and so on.
Please help me, any suggestion will be appreciate.Thanks!
Evan

I'm not sure where they are on the DVD, but they can be downloaded from service marketplace. If you're on 5.3, they'll be in a VIRACCNTNTXX_0-10006688.SAR, and have to be extracted using SAPCAR. Do a search on your DVD for cc_ume_roles.txt. Import that txt file into the UME using the import button from http://<server>:<port>/useradmin.
If you still can't find it, here's the txt file information. Put this into a text file:
[role]
rid=VIRSA_CC_ADMINISTRATOR
rdesc=Virsa Compliance Calibrator Administrator
action=com.virsa.cc.CreateRuleSet;com.virsa.cc.ChangeRuleSet;com.virsa.cc.DeleteRuleSet;com.virsa.cc.ViewInformer;com.virsa.cc.ViewRuleArchitect;com.virsa.cc.ViewMitigation;com.virsa.cc.ViewAlertMonitor;com.virsa.cc.ViewConfiguration;com.virsa.cc.ViewMgmtReport;com.virsa.cc.RunRiskAnalysis;com.virsa.cc.RunAuditReports;com.virsa.cc.RunSecurityReports;com.virsa.cc.CreateBP;com.virsa.cc.ChangeBP;com.virsa.cc.DeleteBP;com.virsa.cc.CreateFunction;com.virsa.cc.ChangeFunction;com.virsa.cc.DeleteFunction;com.virsa.cc.MassFuncMaint;com.virsa.cc.CreateRisks;com.virsa.cc.ChangeRisks;com.virsa.cc.DeleteRisks;com.virsa.cc.CreateCrActions;com.virsa.cc.ChangeCrActions;com.virsa.cc.DeleteCrActions;com.virsa.cc.CreateCrRoles;com.virsa.cc.ChangeCrRoles;com.virsa.cc.DeleteCrRoles;com.virsa.cc.CreateCrProfiles;com.virsa.cc.ChangeCrProfiles;com.virsa.cc.DeleteCrProfiles;com.virsa.cc.CreateOrgRules;com.virsa.cc.ChangeOrgRules;com.virsa.cc.DeleteOrgRules;com.virsa.cc.CreateSupplementRule;com.virsa.cc.ChangeSupplementRule;com.virsa.cc.DeleteSupplementRule;com.virsa.cc.CreateAdmins;com.virsa.cc.ChangeAdmins;com.virsa.cc.DeleteAdmins;com.virsa.cc.CreateBUnit;com.virsa.cc.ChangeBUnit;com.virsa.cc.DeleteBUnit;com.virsa.cc.CreateMitCntl;com.virsa.cc.ChangeMitCntl;com.virsa.cc.DeleteMitCntl;com.virsa.cc.CreateMitUser;com.virsa.cc.ChangeMitUser;com.virsa.cc.DeleteMitUser;com.virsa.cc.CreateMitRole;com.virsa.cc.ChangeMitRole;com.virsa.cc.DeleteMitRole;com.virsa.cc.CreateMitProfile;com.virsa.cc.ChangeMitProfile;com.virsa.cc.DeleteMitProfile;com.virsa.cc.CreateMitHRObject;com.virsa.cc.ChangeMitHRObject;com.virsa.cc.DeleteMitHRsObject;com.virsa.cc.GenerateAlert; com.virsa.cc.DeleteAlert;com.virsa.cc.ClearAlert;com.virsa.cc.ExportRules;com.virsa.cc.ImportRules;com.virsa.cc.ViewBgJobLog;com.virsa.cc.ViewBGJobsForAllUsers;com.virsa.cc.ExportMitigationData;com.virsa.cc.ImportMitigationData
[role]
rid=VIRSA_CC_REPORT
rdesc=Virsa Compliance Calibrator Report only
action=com.virsa.cc.ViewInformer;com.virsa.cc.ViewMitigation;com.virsa.cc.ViewAlertMonitor;com.virsa.cc.ViewMgmtReport;com.virsa.cc.RunRiskAnalysis;com.virsa.cc.RunAuditReports;com.virsa.cc.RunSecurityReports
[role]
rid=VIRSA_CC_SECURITY_ADMIN
rdesc=Virsa Compliance Calibrator Admin
action=com.virsa.cc.CreateRuleSet;com.virsa.cc.ChangeRuleSet;com.virsa.cc.DeleteRuleSet;com.virsa.cc.ViewInformer;com.virsa.cc.ViewRuleArchitect;com.virsa.cc.ViewMitigation;com.virsa.cc.ViewAlertMonitor;com.virsa.cc.ViewConfiguration;com.virsa.cc.ViewMgmtReport;com.virsa.cc.RunRiskAnalysis;com.virsa.cc.RunAuditReports;com.virsa.cc.RunSecurityReports;com.virsa.cc.CreateBP;com.virsa.cc.ChangeBP;com.virsa.cc.DeleteBP;com.virsa.cc.CreateFunction;com.virsa.cc.ChangeFunction;com.virsa.cc.DeleteFunction;com.virsa.cc.MassFuncMaint;com.virsa.cc.CreateRisks;com.virsa.cc.ChangeRisks;com.virsa.cc.DeleteRisks;com.virsa.cc.CreateCrActions;com.virsa.cc.ChangeCrActions;com.virsa.cc.DeleteCrActions;com.virsa.cc.CreateCrRoles;com.virsa.cc.ChangeCrRoles;com.virsa.cc.DeleteCrRoles;com.virsa.cc.CreateCrProfiles;com.virsa.cc.ChangeCrProfiles;com.virsa.cc.DeleteCrProfiles;com.virsa.cc.CreateOrgRules;com.virsa.cc.ChangeOrgRules;com.virsa.cc.DeleteOrgRules;com.virsa.cc.CreateSupplementRule;com.virsa.cc.ChangeSupplementRule;com.virsa.cc.DeleteSupplementRule;com.virsa.cc.CreateBUnit;com.virsa.cc.ChangeBUnit;com.virsa.cc.DeleteBUnit;com.virsa.cc.GenerateAlert;com.virsa.cc.DeleteAlert;com.virsa.cc.ClearAlert;com.virsa.cc.ExportRules;com.virsa.cc.ImportRules;com.virsa.cc.ViewBgJobLog;com.virsa.cc.ViewBGJobsForAllUsers;com.virsa.cc.ExportMitigationData;com.virsa.cc.ImportMitigationData
[role]
rid=VIRSA_CC_BUSINESS_OWNER
rdesc=Virsa Compliance Calibrator Business Owner
action=com.virsa.cc.ViewInformer;com.virsa.cc.ViewRuleArchitect;com.virsa.cc.ViewMitigation;com.virsa.cc.ViewAlertMonitor;com.virsa.cc.ViewConfiguration;com.virsa.cc.ViewMgmtReport;com.virsa.cc.RunRiskAnalysis;com.virsa.cc.RunAuditReports;com.virsa.cc.RunSecurityReports;com.virsa.cc.CreateBUnit;com.virsa.cc.ChangeBUnit;com.virsa.cc.DeleteBUnit;com.virsa.cc.CreateMitCntl;com.virsa.cc.ChangeMitCntl;com.virsa.cc.DeleteMitCntl;com.virsa.cc.CreateMitUser;com.virsa.cc.ChangeMitUser;com.virsa.cc.DeleteMitUser;com.virsa.cc.CreateMitRole;com.virsa.cc.ChangeMitRole;com.virsa.cc.DeleteMitRole;com.virsa.cc.CreateMitProfile;com.virsa.cc.ChangeMitProfile;com.virsa.cc.DeleteMitProfile;com.virsa.cc.CreateMitHRObject;com.virsa.cc.ChangeMitHRObject;com.virsa.cc.DeleteMitHRsObject

Similar Messages

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

HT201335 Ive bought Apple TV and upgrade my macbook air Os X ver 10.8.2 but i could not see the airplay on the top menu bar . please help! thank you.

Ive bought Apple TV and upgrade my macbook air Os X ver 10.8.2 but i could not see the airplay on the top menu bar . please help! thank you.

The ability to use AirPlay is BOTH an OS requirement(Mountain Lion) AND has hardware requirements. You need to check and see if your 2010 Air will support Airplay.

Read only custom field for particular user

Hi,
I have requirement to few enterprise custom field should be edited by only top management,Project manager and team member can only read the same field.
Like i have one custom enterprise baseline finish date,which need to update by only IT GM,and other staff can see only as read mode.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hasan,
You have few options, based on the route you want to take"
1) You could control the "Visbility" of the fields, via using a feature like
Target Audiences .
However,this may not control the same custom field on the page based on user permissions.
2) Use JavaScript: https://badalratra.wordpress.com/2013/05/04/how-to-disable-pdp-custom-fields-using-javascript/
3) Jquery: http://epmainc.com/blog/locking-custom-fields-pdp-project-server-2013-using-jquery
4) Customization: https://epmxperts.wordpress.com/2014/01/20/secure-pdp-pages-as-per-project-server-security/
5) You could look into a third part product, by Fluent Pro: https://help.fluentpro.com/pdp_manager/start
I realize these may not be exactly what you need, but with some effort, I am sure you could modify the code and reuse.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?

Howdy!
I'll bet I'm not the only one wishing for this. Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise. In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
This can be a critical issue: keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
A movie's topical hierarchy could be along these lines, for example ...
Section 1 - National Brands
What are National Brands?
Why Are They Important to Our Business?
Working with Nat. Brands
Practice Your Knowledge
Section 2 - International Brands
What are International Brands?
Why Are They Important to Our Business?
Working with Intl. Brands
Practice Your Knowledge
You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
Has anyone solved for this need yet?
I'm all ears, and you'd be doing learners of the world a huge favor.
Thanks!

Hi, Jim.
Thanks for being 'on the case' and looking into this so quickly. Your
findings are encouraging, although my user base is generally working with
IE 6 and FP8 or 9.
Since the only thing I may influence is getting IT to help push out FP10,
I'm hoping it's more of a player- than a browser-version issue.
I'll test things out by Monday and let you know the results. Wish me luck!
Dave
                                                                                From:       Jim Leichliter <[email protected]>
To:         Dave Tressler <[email protected]>
Date:       03/26/2010 06:02 PM
Subject:    Possible to Have ToC Default to Show Only Top Level (collapse
              sublevels)?
Dave,
I just tested this on my local web server and it worked fine. I created a
blank project with 8 slides. Created my TOC with grouping... 2 slides in
each group. I turned on self paced learning. I tried with and without the
widget and it picked up where I left off in either case. See
https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en.
I published using FP10 and IE8 to view. Notice any difference between
your project and this one?
Thanks,
Jim Leichliter

How to make the report shows only top level steps

HI,
I use many subsequences in my tests. I have no interest to see them in the report. How can I force the report to show only top level steps?
Thanks
Rafi

I needed to prevent 'Skipped' steps from appearing in my reports. One way to do this is to override the SequenceFilePostResultListEntry callback in the model. You do this by clicking on Edit and then Sequence File Callbacks and then find SequenceFilePostResultListEntry in the list and click the Add button.
Edit your new callback in your sequence file to check for a pre-condition. In my case I checked for Parameters.Result.Status == "Skipped" since that parameter is set to Skipped, Done, etc. based on the result.
If the condition was true then my only step in the callback was to set Parameters.DiscardResults = True. The TestStand model will then throw that result away when it processes the report. You could add a step for every type of data you wish to discard.
A second method that is easier to implement, but time consuming, is to select each step you DON'T want in your report and bring up the Properties for that step. Under the Run Options tab, deselect the Record Results box. That will keep the results of that step out of the report, but you have to do this for EVERY step you don't want to have reported. The first approach I provided acts to filter the results.
If you aren't sure what the Parameters.Result.Status will be, then set a breakpoint after that step is executed and scan the parameters when the sequence is halted there. You can then detect the actual text used as a result for that step, such as "Done" and can set your pre-condition appropriately.

Can a workflow e-mail notif. only show fields that have changed?

I'd like to send an e-mail to an end user whenever any field in a Solution has changed. The e-mail notification workflow for my Solution works and starts out like this:
(PRE('<ModifiedDate>') <> [<ModifiedDate>]) AND...
However, I run into max character limitation in the e-mail message body. (will look at ToChar next) What I tried to do was display the new and previous values for the fields. This worked till I reached the char limits. Even if I could key in all the lines of characters necessary for this, the mail recipient would have to carefully go through all the fields and compare them to see which one(s) has changed. This takes too much time for the end user to do.
Is there I way (using a single workflow) to display in an e-mail only the fields that have changed? I've looked through the posts and have not yet found an answer. Thanks.
Edited by: user11167975 on Jun 16, 2009 1:34 PM

You can resolve this by creating One workflow for each field or a small group of fields you want to track. Only thing is the user may receive more than one email reguarding the same Solution.

Could not see SH schema details in AWM 11g.

Hi all,
I have installed oracle db 11g (11.1.0.6) and installed awm 11.1.0.7.
I am trying to open db instance in AWM by SH Schma, but i could not see the dimensions which already in place (as this is oracle defined sample schema). What could be done to see the details of schema.
regards
chandra kanth.

AWM allows you to connect to the database in two modes: 10g and 11g. In 10g mode you will see only the 10g style AWs, and in 11g mode you will see only 11g style AWs. I don't know which version of the SH AW you have, but it is worth trying both connection modes. You will see the option ("Cube Type") in the dialog where you enter the password.
More generally you should upgrade your database instance to 11.1.0.7 at the least if you are planning to use OLAP, and there are recommended OLAP patches to be applied on top of that. See the following certification page for details.
http://www.oracle.com/technetwork/database/options/olap/olap-certification-092987.html

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

HT4972 My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-startedev

My IPad 2, IPhone 3GS ans iPod no longer work with apple TV, I have 2 apple TV in my house and for he last 3 weeks the iPod was the only one we could use for appleTV now none of them works, the apple TV icon does not show up any more. Re-started everything.

Ok thank you so much, for your timely response.
RESPONSES:
1)   When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2)   I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3)   So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself.

We want only Division field Mandatory in Basic Data 1 View (T Code MM01)

Hi,
In Logistics u2013 General-> Material Master-> Field Selection-> Maintain Field Selection for Data Screens, for Field sel. group 90, we selected the Reqd Entry Option Button to make Division field in Basic Data 1 as mandatory.
Due to this fields like Sales unit, Unit of Measure Grp, DChain-spec. status etc. became Mandatory for T Code MM01
We want only Division field Mandatory.
Is there any way to create our own Field sel. Group where in we could assign the Fields we want to make mandatory?
Please guide.
Regards,

Hi ,
Goto the Traansction code OMS9 and enter the FIELD SELECTION GROUP as 20 which is the field group for Division
now goto the details and in change mode you can find the FIELD like HIDE, OPTIONAL, DISPLAY , REQUIRED ENTRY
Chcek the radio button of Required field entry and save it
Now once you enter the MM01 , there you will find Division as Mandatory field
regards,
santosh

I paid for exportpdf and everytime i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. how can i export only form fields that were filled in?

i paid for exportpdf and every time i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. Some forms can't be saved so having to log in and only use webtool to upload a saved pdf won't work.
as well, how can i export only form fields that were filled in if I can get pdf to save to computer?

Hi kstine,
I can see why that would be frustrating! Have you tried selecting Stayed Signed In underneath the Adobe ID and Password boxes when you try to log in?
What did you use to create the PDF form? If you used FormsCentral, form data is saved to your online FormsCentral account. If you have Acrobat, you can export form data as described here: Adobe Acrobat X Pro * Manage form data files
Best,
Sara

Why doesn't latest version of pdf have a visible signature, only blank fields

I'm C# user and tried both createUrlWidget and createPersonalUrlWidget to send a test document, and after it signed by signer, I used both getLatestDocument and getDocuments, but only get a pdf without seeing signature like this:
I can get signed doc using the link in email sent to signer:
So, I'm confused, can anybody answer me where did I missed?
1. the method I used to create url widget:
public static bool createUrlWidget(string fileName)
            FileStream file = File.OpenRead(fileName);
            com.echosign.secure.FileInfo[] fileInfos = new com.echosign.secure.FileInfo[1];
            fileInfos[0] = new com.echosign.secure.FileInfo(fileName, null, file);
            SenderInfo senderInfo = null;
            //string[] recipients = new string[1];
            //recipients[0] = recipient;
            RecipientInfo[] recipients = new RecipientInfo[1];
            recipients[0] = new RecipientInfo();
            recipients[0].email = "[email protected]";
            RecipientRole role = new RecipientRole();
            role = RecipientRole.SIGNER;
            recipients[0].role = role;
            WidgetCreationInfo widgetInfo = new WidgetCreationInfo();
            widgetInfo.name = "Test Docx";
            widgetInfo.fileInfos = fileInfos;
            //widgetInfo.counterSigners = recipients;
            WidgetPersonalizationInfo personInfo = new WidgetPersonalizationInfo();
            personInfo.comment = "Test sign of doc";
            personInfo.email = recipients[0].email;
            personInfo.reusable = false;
            UrlWidgetCreationResult result = ES.createPersonalUrlWidget(APIKey, senderInfo, widgetInfo, personInfo);// ES.createUrlWidget(APIKey, senderInfo, widgetInfo);
            if (result.success)
                DocumentKey2 = result.documentKey;
                urlWidgetReturn = result.url;
            else
                return false;
            return true;
2. the method I get the documents, there's only 1 content in returned DocumentContent[]:
public static void getDocuments(string documentKey)
            GetDocumentsOptions opts = new GetDocumentsOptions();
            //opts.versionKey = "latest version";
            //opts.participantEmail = "[email protected]";
            opts.combine = true;
            opts.attachSupportingDocuments = true;
            GetDocumentsResult result = ES.getDocuments(APIKey, documentKey, opts);
            if (result.success)
                DocumentContent[] contents = result.documents;
                foreach (DocumentContent dc in contents)
                    FileStream file = File.OpenWrite(string.Format("c:\\{0}.pdf", Guid.NewGuid()));
                    file.Write(dc.bytes, 0, dc.bytes.Length);
This is my first time to use this api, so maybe I missed some important steps to cause this. I appreciate anybody which could see this and help me.
Thanks a lot!
Kenny

I figured it out myself, I should use the shorter keys parsing from formDataCsv in GetFormDataResult to retrieve the latest version.

How to call hr_location_api.create_location for different address style with only those fields that belongs specific to that address style.

How to call hr_location_api.create_location for different address style with only those fields that belongs specific to that address style. It should decide at run time means at run time it will come to know the type of address style and based on that only the fields which belong to address details mapped to calling hr_location_api.create_location.
Thanks in advance.

You can create a wrapper package on top of the API (hr_location_api.create_location)
In the wrapper package you set all the values dynamically based on your requirements(say the style and add_line columns are populated on your conditions) and then you call the API.
Does that not work ?

1080i footage played in Viewer only displays field 1

I'm using an iMac without an external monitor. I have 1080i footage. I can jog forward a field at a time and see both fields individually in the viewer. But when played real time, my iMac only displays field 1. Same thing if I play it back full screen.
I know I wouldn't have this problem if I had an external monitor. But is there a setting somewhere so the iMac will display both fields during playback?
It's a 2011 iMac. 2.5 GHz Intel Core i5.
THANKS.

Thanks Tom. Yes, with that setting both fields are displayed, but only when the sequence is paused. You'll see both fields when paused, but only see field 1 when playing.
You can forward a field at a time with Option and left or right arrow. In Time Display, turn on "show subframes" in the Time Code display. Field 1 is 00 subframes. Field 2 is 40 subframes.
Strangely, the Event Browser Display works differently. In that window I can see both fields when it plays. And the "display both fields" in the Event Browser Display must have a bug. It doesn't work for me, it always displays both fields.
But in the main Viewer I only see field 1 while playing.

Only top field could be see

Similar Messages

Maybe you are looking for