Only two calls on 7920 phone

I configured the maximum of calls to 4 and the busy trigger to 4 on the callmanager for the 7920 phone.
Now, the problem is when two calls are activ on the 7920 phone, it is not possible to tranfer one of the calls to a internal number. The phone shows the message that the internal number is busy.
Why only two calls can be handled on my 7920 phone?
regrads
Pascal

try to configure a second line on the 7920. it can have up to 6 multiline appearance-extensions or speed dials. set the maxCall/busyTrigg and try the xfer again.

Similar Messages

Q10 only takes calls on speaker phone

q10 only makes and receives calls on speaker phone

Have a look here,
http://support.apple.com/kb/TS1630
and here if necessary...
http://support.apple.com/kb/TS2802

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring.

I have two different 5s's with two different phone numbers but they are both using the same iCloud/apple account. After upgrading to iOS8 when I get a phone call on one phone both phones ring. One phone is for work and one is for private and I don't need both phones to ring from one call. It's bizarre.......is this supposed to be like this? If so where can I turn it off?? And while we are at it iOS8 has installed iBooks on both of my phones and iTunes won't let me uninstall it. I don't need or want iBooks on my phones.

Hi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps!

Only two contacts transfered to my new phone

only two contacts transferred to my new phone from backup assistance and old phone is broke and wont turn on how can I get my contacts

Were the contacts synced with your Gmail account instead?

Hello ! i was in Vietnam , I can buy 1 pcs iphone4s , so phone market in Vietnam is quite complex tap.toi bought second-hand products appe dung.khi listen and buy the only known called glide wep.i not know what about software icoud and my brother borrow a

Hello ! i was in Vietnam , I can buy 1 pcs iphone4s , so phone market in Vietnam is quite complex tap.toi bought second-hand products appe dung.khi listen and buy the only known called glide wep.i not know what about software icoud and my brother borrow a watch and do something when i hold the camera has locked user accounts icoud.va I never should never registered icoud know nothing about it through ca.vua im traffic accident problem in my head so do not remember anything , what e-mail address registered in both phones now I just keep imei number in my notebook only. I loved iphone 4s phone her , so I had to buy it for 120 employees ngay.vi not use the phone anymore I 've lost 10 eat sleep all right now roi.cac you please have I somehow helps reactivate and continue to use it not ? if have any information please email them to help me [email protected] . because my language is bad for you please email them for me I can not speak directly with you is just empathy for me okay ! thank you

Stop trolling and don't post personal information on a public forum. Nobody can help you on a public user to user technical support forum.

HT1414 I want to have a greater number of phone numbers saved under the "recent" category. Under the "all" tab, it looks like I am only getting calls from the previous week and not prior to that. What can I do to retain more phone calls than just for a

How do you set up the phone to save more "recent" phone calls than just for one week? I am only able to see recent phone calls under "all" tab for just one week. Is there a way to do it for a month?

You cannot do that on your iPhone -- however, you can go to your cellular carrier's site and see your recent calls. They go back to the beginning of your current billing period. For calls older than that, you can also look on your carrier's website and access your previous billing statements.

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button. why?

Hi, this is amit from india. just started using iphone 4s. i am observing that when an incoming call comes, the phone smtimes shows two virtual buttons of red and green color so as to attend or reject the call. but smtimes it just shows green button with a slider to attend the call and there is no red button to reject the call. is it a bug or some setting?

Because it behaves differently depending on whether the phone is locked (in standby) or unlocked (in use) when the call comes in.

Two Droid 2 Global phones - Flaky since software update

I have two Droid 2 Global phones which were purchased at the same time. Ever since the last software update, which I believe was the Gingerbread update, these phones have been acting flaky in several ways with various features just shutting down and only a restart of the phone able to make them work again. Both phones have been having the exact same problems so that leads me to believe it is likely software related.
1) It quits ringing...even with ringing volume turned all the way up, incoming calls just don't ring. Same with text messages. Restarting phone fixes the problem.
2) The camera will take a picture, but when you go to look at it in the gallery, it is just a blank image. Unless you go look at the gallery, you have no way of knowing the picture didn't take. Once again, restarting the phone fixes this.
3) I have similar issues with the bluetooth. I sync it up to my car stereo, but sometimes it just won't sync until I restart the phone.
With the age of these phones, I suspect there are no more software updates on the way from Verizon. Can anyone confirm that? Unfortunately, the last software update also prevented <Deleted per the Verizon Wireless Terms of Service.> Any suggestions on how to get these phones some sort of software update or useful again? A phone that doesn't ring isn't much use.
Message was edited by: Verizon Moderator

Hi jksoft,
I know how troubling these difficulties can be especially when it's happening to two lines of service. I extensively researched this trouble in our database as well as Motorola's and was unable to find this as any known trouble. The gingerbread update was the last release for the Droid 2 and no expected changes as of now.
Are you using the ringtones and notifications that are preloaded in the phone or the ones you have obtained elsewhere? If you haven't tried it yet, please use a notification tone and ringtone that is from the device itself. Let me know if this makes the device work correctly.
The trouble with camera and bluetooth don't have troubleshooting steps other than doing a hard reset of the device. This will completely wipe out the device but items like contacts and media can be backed up. To complete the reset go to http://bit.ly/rqKDhh and follow the steps for the preferred method. Please keep us posted as we may need to file an investigation with Motorola to review this.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Cannot answer calls on I phone 5.

The phone rings, actually it doesn't ring, it vibrates. Nothing shows up on the phone as per caller, ID or an answer option/page. If I go to the call pad screen on the PHONE icon, again its as tho no one is calling. The only reason I know it is an incoming call is from the vibration (which is enabled along with ringer) and then I get a missed call message! Soft reset will get me one or two calls then the same thing happens again. Tried hard reset, taking everything off and then putting it back on thru I tunes. Same thing. Any ideas peeps? Well frustrating, new phone?

Greetings jeffers59,
I can certainly understand your frustration at being unable to receive phone calls on your iPhone 5. I know it would bother me. Let's see if we can get you back up and running.
If you are having an issue with being unable to receive calls as you describe, and you have already tried resetting the iPhone, the next step would be to back up any data on the iPhone and then erase it and set it up as a new device. See this article for how to do so -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

I purchased three albums last week and only two of them were charged. How can I make sure that the third album gets charged in a timely fashion?

I purchased three albums last week and only two of them were charged. How can I make sure that the third album gets charged in a timely fashion?

Well, thanks for feeling with me, patkosanke ... AND for your wise advice.
I did followed your advice immediately and erased all the service number as well as S/Ns.
Can you, however, give me any "direct number" through which I can get hold of someone and request for what you're suggesting?
I believe I had talked with the person by the name of "Charlie" (I think... I hope I'm correct...) when I was having the same problem with the last device. He was very kind and helpful, though I ended up getting the device that brought the same problem.
Charlie told me that if I had any more problems I should call him. But I forgot to take down his direct number.
Or maybe I should call the main office and ask for him. But my memory is questionable as to his name, and besides I don't even know his last name either. There could be more than one "Charlies" in Palm.
So, if you could somehow email me some direct number (other than the one that keeps on hooking me up with those people in the overseas who are answering the phone only to sympathize with & apologize to me but can only issue a false hope with the SRO#. More than once I was given the promise that the supervisor would call me back within an hour or two but I ended up calling back after I had been left hanging in the air all night long.) where I can talk to someone like I did with Charlie last time who can truly carry out the promise, I would truly appreciate it, patkosanke. ^^
Thanks
jcinlovewpalmTX
Post relates to: Palm TX
Post relates to: Palm TX
Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM
Message Edited by jcinlovewpalmTX on 03-05-2009 06:36 PM

Transfering calls with a phone behind a CUBE.

Hello,
My setup is as follows.
I have two softswitches, one behind my CUBE (from now on I call it "M") and another one outside the CUBE (from now on I call it "A").
I can call from A to M and viceversa.
If a phone from A orginates a call to M, that phone from M can transfer that call to another phone from M..but I am not able to transfer that call to a phone from A (that is, a connection between two phones from A)
Softswitch M is a softswitch we are currently testing, and using a CUBE is the only way we can hook it to the network without making lots of changes in the routing tables.
I was wondering if the transfer I am not being able to complete, can be accomplished.
I will be happy to provide you with any info you require to help me with my problem.
Thank you in advance for your help.

Softswitch A is an Asterisk 1.8, so it does.
This is the initial invite, the one that phone registered in A sends to CUBE.
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.0.6.4:5060;branch=z9hG4bK265d780a
Max-Forwards: 70
From: "Gabriel Lema" <sip:[email protected]>;tag=as54f712b3
To: <sip:[email protected]>
Contact: <sip:[email protected]:5060>
Call-ID: [email protected]:5060
CSeq: 102 INVITE
Date: Thu, 12 Jun 2014 12:15:35 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 297
v=0
o=root 884768917 884768917 IN IP4 10.0.6.4
s=Asterisk PBX 1.8.7.0
c=IN IP4 10.0.6.4
t=0 0
m=audio 10598 RTP/AVP 8 0 18 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=sendrecv
And this is the one that CUBE sends to M.
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.0.10.254:5060;branch=z9hG4bK6DBF1889
Remote-Party-ID: "Gabriel Lema" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Gabriel Lema" <sip:[email protected]>;tag=E193EFFC-60F
To: <sip:[email protected]>
Date: Thu, 12 Jun 2014 12:15:09 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 0138615386-4049736163-2934674880-0163092859
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M4
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1402575309
Contact: <sip:[email protected]:5060>
Call-Info: <sip:10.0.10.254:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 280
v=0
o=CiscoSystemsSIP-GW-UserAgent 2759 7351 IN IP4 10.0.10.254
s=SIP Call
c=IN IP4 10.0.10.254
t=0 0
m=audio 19398 RTP/AVP 8 0 101 19
c=IN IP4 10.0.10.254
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=rtpmap:19 CN/8000
Thanks,
Gabriel

1751 places two calls

Hi.
1. I'm installing a 1751 w/ 12.2(11)T1 and a VIC-2FXS. When i connect a phone on port 0 and dial a number, it places two calls for the same destination using the two ports. I ear the mix of the sound of the two channels and at the remote end people doesn't ear me. This doesn't happen when i use port 1.
2. In a VoIP configuration with multiple remote sites and a gatekeeper, how does the remote site know what are their E164-IDs to send when registring? Does the router assume the "destination-pattern" from all the "dial-peer voice XX pots"?
3. Is there a configuration example of a case study with VoIP, a gatekeeper and several remote sites? The only one i found at cisco was w/ one remote and one gatekeeper.
Thanks in advance.
Telmo

1. As for as I know there is no bug in the IOS 12.2(11)T1 related to your voice specific problem. check whether you are using the same codec on both sides.
2. Check the following links for Gatekeepers
Understanding H.323 Gatekeepers
http://www.cisco.com/warp/public/788/voip/understand-gatekeepers.html
Understanding Cisco IOS H.323 Gatekeeper Call Routing
http://www.cisco.com/warp/public/788/voip/gk-call-routing.html

Lost call on 7920

Hi,
this is the situation in our deployment:
a 7920 phone is configured with line xxxx. Same line xxxx is shared on 7940 phone.
Sometimes a call, routed to line xxxx, ring on 7940 but the 7920 is not alerted at all. So we have only a missed call signaling on 7940 and the call is lost. The 7920 is always in roaming...
Any hint?
Thanks

For 7920, would ensure you are using 3.02.
Also for AP not sure if you are using autonomous or lightweight controller.
If lightweight controller and pre-4.0.217.0, was an issue where 7920 connection to CallManager could get reset as the packets could get aged out within a 1 second period.
The workaround was to set the 802.1p tag for platinum to 7 vs 6. Would suggest to upgrade if possible though.
Also the 7920 sleeps every 2 seconds and doesn't use DTIM to check for queued packets, so could potentially be up to a 2 second delay. Would need to ensure proxy ARP is enabled on the AP with the 7920.
Send more info about your network.

Hello can someone help me I have an iphone 4 and my daughter has an ipod touch we are on the same email address but somehow with in the last 25hrs all of my contacts are gone and only hers on on my phone is there a way for me to get all my contacts back?

Hello can someone help me I have an iphone 4 and my daughter has an ipod touch we are on the same email address but somehow with in the last 25hrs all of my contacts are gone and only hers on on my phone is there a way for me to get all my contacts back?

If you need assistance with finding any of your restores or attempting to restore from any that happened prior to his incident follow this article
http://support.apple.com/kb/ht1766
IF you do find a backup that has your contacts; I'd /highly/ recommand turning off your wifi network after the restore is finished because if the issue is with your iCloud your contacts may merge back with her's.
With iCloud you DO NOT want to share the account; bad things happen Evil evil thigns...
But in all seriousness; if two devices have the same iCloud; iCloud is told to merge and sync infomation between hte two and can't tell that it doesn't belong to the same person

Only two calls on 7920 phone

Similar Messages

Maybe you are looking for