Only two of three monitors working since upgrading to 10.9.3

Only two of my three monitors work since installing 10.9.3. I want to roll back to 10.9.2. How should I do this?

I had already tried that configuration. It was working fine until I upgraded to 10:9.3. If I boot into the recovery disk volume, all three monitors work. If I boot from a backup/clone of my drive prior to installing 10.9.3, all monitors work fine.
Any other suggestions will be welcomed.

Similar Messages

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Signature field NOT working since upgrade to Adobe Pro X

Hi Forum,
Form stop working since upgraded to Pro X (ver 10) in Adobe. Getting this message:
IntegriSign
This plug-in is intended for validating signatuers signed using earlier versions of Acrobat. To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
I have changed settings in Adobe Pro X to the above but still get the same message.
Do anyone know how to fix this?
Thanks,
Patricia

Download directly from Apple and install over what you have now;
iTunes 12.0.1

Home sharing on apple tv not working since upgrade to yosimite

home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
everything worked fine before this!

Hey stephenfromdominion,
Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks,
Matt M.

Have not been able to get flash working since upgrading to 7.0.1, using the Debian Linux OS.

I haven't been able to get the flash player working since upgrading to FF 7.0.1 on Debian Linux. I have followed the instructions in "How do I install the Flash plugin?" (https://support.mozilla.com/en-US/kb/installing-flash) multiple times.
As I said this has been an issue since the latest upgrade. I was able to get flash working in earlier versions. Flash works in the Debian "Iceweasel" version of FF.

Thanks for the post, but no, that did not fix the problem.
I have located these directories:
/opt/firefox/plugins
/usr/lib/firefox/plugins
/usr/lib/mozilla/plugins
/usr/lib/mozilla-firefox/plugins
of course there is the /usr/lib/flashplugin-nonfree directory but that shouldn't matter for FF itself.
Still not working and I get this message on the "Check you plugins" page:
"For your safety, Firefox has disabled your outdated version of Flash. Please ''upgrade to the latest version.''"
The version on that page "Adobe Flash Player version 11.0.1.152
Your system: Linux 64-bit, Firefox" is the version I'm using.

TS1398 The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?

greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade."

I can't get Google Autofil to work since upgraded to Firefox 4

I can't get Google Autofil to work since upgraded to Firefox 4
running on windows XP

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

IPhone 3GS stopped working since upgrading to itunes 10.5

since upgrading my itunes i get these messages saying that
A: charging is not supported with this acessory
B: this acessory is not optimised for this acessory (when trying to use ipod or anything else)
ive read "how to fix this" but people think that its something wrong with the chords and dirty products.
that is not my case. ive tried three different apple chargers in all ports and sockets in the house. none of them are dirty, there are no pins out of place, and no water has gotten near anything. this is very annoying and i cant use my phone at all. moreover my warranty is up but apple did this to my phone with all their stupid updates. you think a company of tech people would know how to properly make software but no.
so can anybody help?
apple?are you going to do something? or just tell people its their fault like usual?
also now my phone is dead and wont charge so i cant really do much right now.

Hi,
just made a discovery i wanted to share here with everyone who have this problem with their 3GS iPhone.
Few days ago i'v tried to upgrade my iPhone to a version 5.0, sync it with my comp through iTunes.
It sucked all my datas in, to back it up, but errorr occurred when the phone was preparing for recovery mode.
Mobile died, display went black and no iTunes or computer (even other computer) no longer recognised my phone when plugged in. Like if the phone didn't exist.
I was searching for answers for hours and tried everything people suggested. Bought new charger. Left mobile charging all day. No sign, light, sound... nothing.
So i took it to an Apple store.
The assistant took the phone and left, to check it. After 5 minutes brought the same dead iphone back and said mobile is no longer under warranty and to repair it will cost me over 120£ or so. And that there is nothing he can do, but all my data are safe if i have back up on iTunes.(which i had).
Said he even tried TO CHARGE THE PHONE BY PLUGGING IT TO A HIGHER VOLTAGE!
But no help. Well that's what he thought!!
After about a 30 min or so....sitting in the coffee shop, i throw the dead phone on the table, and without any thought just pressed two buttons, as i did thousand times before. The home and power button on the top, held them maybe 5 seconds... and suddenly the phone woken up!!!!! Empty battery sign appeared on a screen, after few seconds gone again.
I repeated same proccess another 2 times, yes iphone was back!!!
At home i plugged it first into a socket to charge, pressed the buttons, battery appeared and after 10 min sign on a display asked to connected mobile to iTunes.
I did and, then just followed the instrutions appearing on iTunes. After 20-30minutes i had all my datas- photos, videos, calendar, notes, messages and contacts back in my iPhone, and even with some more extra features and improvements.
Love my phone again.
So my advice is, when nothing helps,
1. TAKE YR PHONE TO AN APPLE STORE, cause only they understand really what they can and cannot do safely!
AND IF THEY TRY :
2. TO CHARGE THE PHONE BY PLUGGING IT TO A HIGHER VOLTAGE! It my wake yr phone up.
Be patient and carefull.!
Good luck!!!

Bluetooth and Isight not working since upgrade to Mountain Lion

Hello,
I have a mid-2010 MBP running OSX 10.8.2.
Ever since upgrading to Mountain Lion, My bluetooth and iSight both have stopped working. I have tried the clear the SMC numerous times. Mostly it does not have any effect. However, a couple of times, it has restored service to the iSight and the bluetooth, but as soon as I reboot the machine they are back to being disabled. Sometimes they become available without my resetting the SMC and for seemingly no reason. I have also replaced a couple of different kext files: Apple_iSight.kext and AppleUsbVideoSupport.kext with known good ones. I also Verified and Repaired on the disk. In this case, permissions issues were detected and repaired, but without fixing my original problems.
I would like desperately to resolve this without buying a new disk and doing a fresh install of OSX Lion. I would definitely NOT go back to Moutain Lion in this scenario. But I don't know what do next. I don't see many posts on this subject and those I have seen do not offer much hope. I know I am not the only one suffering with this, but I don't think Apple is addressing the problems, because they may not be pervasive enough right now.
If anyone has found a way to resolve this permanently, please share with me. I would like to roll back to Lion, but can't do that either.
Can anyone help me out?
Thanks,
Brad.
<Edited by Host>

This is likely a conflict with some 3-rd party s/w you have on the MBP but not the other two computers. Have a look in here
 > System Preferences.. Users & Groups | Login Items
Is there something in here that's not in the same list on the other Macs? If so, try removing it and restarting your computer. If that solves the problem, try contacting the developer to see if there's an update.
If that doesn't solve the problem, go through your other 3rd party apps and look for updates on all of them. One of them is stopping your mouse from working properly.

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

Why does Remote App no longer work since upgrading to IOS 6?

Since updating my Touch to IOS 6, I can no longer use the Remote App to connect to my itunes library on my iMac. I have tried both homesharing and "add an itunes library" and both have failed. I have been through all the posted support articles with no success. By the way, I can still use my first generation IPAD to connect with no problems.

I have this problem also,
We have an iPad 2, iPod Touch, iPhone 4,4s and iMac.
The printer is a HP LaserJet CP1525nw and is listed as a compatable AirPrint printer.
The two iPhones and iPad 2 were upgraded to IOS6 last week.
We wanted to print something out today and when selecting printer it came up with "No AirPrint Printers Found".
This happened on the Other iPhone and the iPad as well. However all the other devices that were not upgraded still work.
I have upgraded the firmware on the printer to the latest version, however this has not helped. I have restarted all devices as well as my network router multiple times to no avail.
Apple need to provide a fix as this provlem is evidently as a result of their IOS6 upgrade.

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

My iTunes hasn't worked since upgrading to iOS 7 on my iPhone 4S

I ugraded to iOS 7 on my iPhone 4S the other day and since then it hasn't allowed me to acces my iTunes, it doesn't crash when I open it but it only comes up with a blank screen. Because of this, my iMessage and notifications for things like Facebook and Instagram haven't been working. Any ideas on how to fix this or has anyone else experienced these problems?

Since upgrading to ios8 on iPhone 4s, I am having a number of bluetooth issues with my motorcycle headset.
1) I can no longer answer an incoming call by pressing the connect button on the headset, however, i can make outgoing calls ok (initiated using Siri).
2) I am unable to terminate a call by pressing the connect/disconnect button.
The headset "connect button" is still working ok for starting/stopping music and other functions - it just seems to be phone call related.
Is anyone else using a motorcycle headset having similar issues? (Mine is a generic Aldi set which I have been using for years)

Does anyone have three monitors working?

A friend of mine who enjoys the piece of mind of using Linux, but not the poking and prodding recently "inherited" a good monitor in addition to the two he already had.
He has two Nvidia cards. One came with the computer and has one out while the other card is much nicer and has dual outputs.
Has anyone gotten three monitors to work in Linux? I googled, but it seems that most of the things I read are from 2004-ish, and it wasn't so good back then.

AFAIK
one screen on the old card, one screen with 2 monitors on the new one and in the ServerLayout section you declare both screens ala
Section "ServerLayout"
Identifier "MEGAMONITORZ"
Screen "OldScreen"
Screen "NewScreen" LeftOf "OldScreen"
EndSection

My flash banners won't work since upgrading to FP11

I created two websites with fade in fade out photo banners in a flash file, since upgrading to the latest flash player, they don't work, any ideas why?

I also have problem with display of swf files but with gradients exported from Illustrator or Freehand.
https://bugbase.adobe.com/index.cfm?event=bug&id=3024322

Only two of three monitors working since upgrading to 10.9.3

Similar Messages

Maybe you are looking for