Only use two colours in one video?

Hello,
Im looking for help with one of my video.
Im new to after effect, just really know the basics, I've tried looking on utube etc for help but cant fine any.
I have a video where I only want to use 2 colours, I know how to set it up using only one colour, if I try using the same technique for the 2nd colour on the same video, it doesn't work.
How can I get it so it will only use 2 colours?
The colours are red and blue.
thanks

Hello,
Sorry, I will give you a example -
Adobe Premiere Pro - Sin City Effect -- The Rain & The Roses - YouTube
Its back and only the rose is red, this is what I want to do, but instead of using only the red, I would like to highlight a couple of things in blue in my own video.
So, if you take the above video, at the time 2.27 to 2.30, where you see the rose red, how would you get the leaves which are below the rose blue?
I already know how to do the black and red effect.

Similar Messages

HELLP!! NEED TO KNOW HOW TO USE TWO IPODS ON ONE COMP!ASAP

i have an ipod nano and an itunes account. Now my mom has a nano and we need to know if you can register them on the same account and how or any other tips for using two ipods on one comp!
PLEASE HELP ASAP!
ZACH

Hello Zach,
There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

I can only use Flash Player in one tab at a time, only on Firefox.

Recently, when I downloaded the new Flash Player, I can only use flash player in one tab at a time. This is only in firefox. I'll open youtube, and the visual and sound both play perfectly. I open up a new tab, begin using a flash website in that tab, and the youtube sound is quiet, only the visual continues to play. I need to multitask with flash sometimes, and this is a big problem for me. Help!

By default, Flash 11.3 and higher will spin up a lot of distinct processes. You should be able to get quite a cacophony going.
Have you ever done any troubleshooting that involves changing how Firefox works with plugin-container.exe or the Flash player's protected mode?
Often it is helpful to disable hardware graphics acceleration in Firefox and in Flash:
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
Unrelated, but you can remove the Java Console extensions unless you are a Java developer (and even then, you probably don't need the old ones):
orange Firefox button (or Tools menu) > Add-ons > Extensions category

Use two actions in one form

I want to use two actions in one form in struts,and without using javascript,is it possible?

I want to use two submit:
one is for adding message;
another is for editing message.
they must be in one form,but i dont know how to use
two actions in one formHi,
Hope this helps.
cheers,
jeric
<html>
<head>
<title>decision</title>
</head>
<body>
<br><br><br>
<center><h3><u>Two submits, one form</u></h3></center>
<%
String userChoice = request.getParameter("decision");
if( userChoice != null && userChoice.equals("add") == true)
    // forward to addMessage.jsp, for example, or whatever
else
if( userChoice != null && userChoice.equals("edit") == true)
     // forward to EditMessage.jsp, for example, or whatever
out.println( "<br><center> the value of userChoice after selection is ... " + userChoice + "</center><br>");
%>
<center>
<form method="post" action ="decision.jsp"> 
    <table width = "50%" align="center">
         <tr><td width = "100%"><hr color ="red" ></td></tr>
          <tr><td height = "10"></td></tr>
         <tr><td align = "center">Do you want to <b>add</b> a message or <b>edit</b> a message?</td></tr>
         <tr><td height = "10"></td></tr>
         <tr><td align = "center">
              <input name = "decision" type = "radio" value = add checked>?add a message??
              <input name = "decision" type = "radio" value = edit>?edit a message?
         </td></tr>
    </table>
    <br>
    <input type="submit" value = " make your selection " >
</form>
<hr color ="red" width = "50%">
</center>
</body>
</html>

I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

I have deactivated my CS6 on my old computer and now when I have downloaded a trial version and enter the serial number it says not valid? I have only used my license on one computer before? Does anyone know the problem?

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
OR
Asked to sign in after paying may help
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
or
http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

Using two templates on one site.

Im trying to design a website, and due to my lack of experience i have gone down the template route. I have download two adobe muse templates. i am designing my website on one of them (so this is a site) i want to use the second template as a new page for my current website how can i do this? Thanks. if I've over complicated things, in short how can i use two templates in one site as two separate pages.

Hi,
You can setup two different master page, each with a template. See if that works.
If you are not already aware of Master page, please have a look to this.
Understanding master pages | Adobe Muse CC tutorials
Do let me know if you have any question.

Bridge is slow because it's only using two threads

I'm finding that Bridge (CS6) exhibits very poor performance when building 100% previews, I think the software is limited to only two threads.
If you load bridge and go into a folder with some images and then Tools->Cache->Purge you'll see that Bridge takes a long time to rebuild the previews even on a high end machine, especially if you have both "Always High Quality" and "100% Previews" selected. I think the problem is that it appears to build the previews using only two threads on the CPU, so while a 2005 dual core machine might get maxed out, a Quad Core, or 8 Thread, or even 12 Thread machine sits there mostly idle while Bridge grinds away for an hour or more.
It's easy to check this, just load up Windows Task Manager, and view the "Processes" tab and Bridge will only ever use 2 threads worth of CPU cycles, i.e. 50% on a Quad Core, and 17% on a 12 Thread high end desktop. I've seen the problem with JPG files, PSD files, and NEF files (Nikon RAW). The processing time of large Nikon D800E NEF files is very slow. After shooting 900 images I can expect the preview build time to take over an hour on a super high end machine with loads of memory, storage IO, and CPU cores and threads, all because it appears bottlenecked on software design. Meanwhile the machine is only running at roughly 20% utilization, the memory barely used, and the IO system close to idle.
I'm using Windows 7 Ultimate 64-bit, 64GB RAM, 12 Thread Core i7 3960X at 4Ghz, two Nvidia GTX470 graphics (in SLI), a 2-way RAID-0 SSD storage array for the OS, and an 8-way RAID-0 SSD array for the photoshop work files. The hardware is clearly not the issue. Although, just to check, I confirmed the same problem exists on a simple Win8 Core i7 system, and a Core i5 laptop.
Even worse, after waiting an hour to build previews for 900 images (3 seconds each), after adding GPS data, or after making edits in Camera Raw it then needs to rebuild all the previews again, this is understandable, but super fustrating when you know it's not working as fast as it really should be.
To be clear, I'm not upset it takes 6 seconds per image per thread - there's a lot of work to do, especially with D800 files. But I'm upset that Bridge's software design only uses 2 threads, and thus limits performance to building a preview every 3 seconds, when in fact it could be working 6 times faster on a PC with 12 thread, and I find it shocking that Adobe's latest software wouldn't be optimized for anything more than a dual core CPU, wasn't quad core launched in 2006?
Roland.
P.S. for any Adobe Tech's reading - I submitted this under case number 184020852 and there's an attached PDF in the ticket including several screenshots.

There have been many discussions in Photoshop forum about processor speed and multicores. I know Bridge is not Photoshop but it may give you some insight as what is going on. Photoshop has supported multithreading since CS3. Here is a quote from Adobe Tech Note:
Photoshop generally runs faster with more processor cores, although some features take greater advantage of the additional cores than others. There is a law of diminishing returns with multiple processor cores: The more cores you use, the less you get from each additional core. Therefore, Photoshop doesn’t run four times as fast on a computer with 16 processor cores as on a computer with four cores. For most users, the increase in performance that more than six cores provides doesn't justify the increased cost.
I run embedded thumbnails (therefore 100% previews are off) as they take up less space and are the fastest to load. I ran a simple test with Bridge CS5 (32 bit) and CS6 (64 bit) on one folder of 200 video images totaling 16 gigs, or 80 meg per file. With folder loaded I clicked Tools/Cache/purge cache for xxx folder. I then timed the rebuild until the arrow stopped spinning in lower left hand corner. For CS5 the time was 35 seconds. For CS6 the time was 72 seconds.
I then took a folder of 1147 jpg images of 660 meg (427k/image). In CS5 it took 12 seconds to build the cache, and the same for CS6. However, the interesting part of this is when I loaded this folder in CS6 I had never been there before so it had to build it. THis took 80 seconds. When I purged it an it rebuilt it took 12 seconds. I have noticed this phenomemum before where the initial build takes 5-7 times longer than a rebuild of the cache.
I then ran the same test with the still images with 100% preview and Always High Quality. With CS5 it took 3 min 30 seconds and with CS6 it took 5 min. 20 seconds.
So with these very SIMPLE tests I conclude that CS6 has quite a bit slower cache process than CS5. As we have all learned with buying new products, new and improved does not always mean it is better.

How can I use two Ipods on one computer.

I was wondering if it is possible to use 2 Ipods on one computer without having to reload all of the music to the new library.

If you are adding a second iPod for your own use, just connect the new iPod to your computer and follow the on screen instructions. It will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update all songs and playlists, selected playlists only or you can manage it manually
If the iPods belong to different users then there are actually a few methods for using more than one iPod on a single computer: How To Use Multiple iPods with One Computer
Just to summarise what's in the link above which is a little out of date:
Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate iTunes Music folders and libraries.
Method two is to set your preferences so that any or all of iPods get updated with only certain playlists within one library:
Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Another option when using a single library is to set any or all of the iPods to manual update: Managing content manually on iPod

Using two iPhones with one Apple id

Hello!!
I am currently an iPhone 3GS user. I just got my new iPhone 5 and as I use two numbers, thought of switching my other number to this 3GS and thus using 2 iPhones for both the numbers. So, can someone tell me if I can use the same Apple id for both the cell or I need to create a new one to use two iPhones. (Please note: I use iCloud only for contacts sync and dont mind having same contacts on both the devices)
Shall appreciate a quick response!
Thank you.

Really appreciate this quick response. So I guess there won't be an issue to use the same id on two iPhones at the same time.
Thanks again!

Help wanted - step by step process on how to use two ipods on one computer

I'm just in the process of getting an ipod (waiting on delivery!) and want to know how it is possible to have two ipods using the same computer but synchronizing differently. I don't want to risk losing my partners music (he'll be very upset!) and I don't want to end up with his music on my ipod. I'd appreciate it if someone could give me a step by step guide or tell me where the best place to look for the answer is. Is it possible somehow to have two different libraries on one computer? Is that how it works?

There are a couple of methods for using more than one iPod on a single computer. Have a look at the article linked below. Method one is to have two Mac or Windows user accounts which by definition would give you two completely separate libraries. Method two as Chris has already described above is to set your preferences so each iPod is updated with only certain playlists within one library. Have a look anyway and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer

Css is it possible to use two VIPs with one source group?

I have separate VIPs defined for balancing dns and radius. Both services are being balanced behind the CSS between two servers running both services. Is there a way, using source groups, to have the outbound dns udp lookups go out the associated dns VIP and a client's returning radius udp traffic sourced from the associated radius VIP?
Just a note for clarity: both services defined for dns and radius have the same ip addresses. I can only define one of the services(i.e. dns) in a single source group which automatically associates the other service (i.e. radius) to that group.

If I understand your question correctly, you want to have the same real server respond with a different source address based on with VIP was used to get to it.
You can only put on instance of the server's ip address into a source group. That is you can't add the service name used for one rule into one group, and the service used in the other rule into another group, since the CSS only looks at the source address when it is determining to use the source group based on the service named in it. In order to have the same server use two different source groups, you would need ACL clause with the sourcegroup option, like
permit any 10.0.0.1 eq 53 dest any sourcegroup
permit any 10.0.0.1 dest any sourcegroup
Michael

Can I use two ipods on one PC?

Hi, I have my own ipod, but would like to get another for my boyfriend but he doesn't have a PC, therefore everything would have to be done from mine, including different albums etc. I am sure I can do this but how does it work?
Cheers
Sue

Hello Soo,
And welcome to Apple Discussions!
Yes you can. And there are several different methods for how to handle syncing two iPods to one computer. For the information and steps on how to handle these methods, I would check out this Apple support document.
[How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]
Hope this helps.
B-rock

Is it possible to use two speakers with one Apple Tv ?

Hello everyone,
I bought an Apple Tv and I have one apple express with a Bose speaker and a Bose Link Air speaker.
I would like to see a movie using the two speakers but every time that I try to select two speakers in the airplay Apple Tv menu, it automatically deselect the other speaker.
Is it possible to use two speakers in the same time ? ( I know it's possible with Itunes)
Thank,
Ps: I have the last Apple TV

No, that is not possible with Apple TV. You can set one 'output' via Apple TV, and 'stream' to multiple speakers from iTunes or via the remote app.

Can you use two ipads with one itune account

We have two ipads and one Itunes account. Are we able to have separate accounts within iTunes so my husband can have his games on his account and I can have mine?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Using an audio from one video to another

I am trying to make a documentary type film and I want to use an audio segment from one video to overlap another video's audio while using the second video just for the video. Here is an example of it.
http://www.youtube.com/watch?v=9u7dJXDhOjc
Im trying to acheive what they did for the first 15 seconds of this clip. I use movie 08.

This is easy in iMovie 09.
Here is [how to do it in iMovie 08|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]

Only use two colours in one video?

Similar Messages

Maybe you are looking for