Only view selected photo via Airplay

Hello,
I have thousands of photos on my iPad. With iOS7 and iPhoto it was possible to select a photo on the left side and this photo was streamed to Apple TV. And when the audience watched the photo I searched on the left side the next photo, clicked on it and this photo was streamed. I think the setting called "Only view active photo" or something like that. It was very comfortable.
Now in iOS8 without iPhoto I can only view the mirror of my iPad /all photos) to select a photo and then the selected photo in fullscreen. To select a new photo I have again to switch to all photos and have to select the new photo I want to show.
Now I'm looking for a app or solution, that I can find and select a new photo while the audience watch only one selected photo on my TV.
I hope it is quite clear what I mean...
Thanks a lot for your help
Daniel

Yes, the data rate of your video is unnecessary (about 50 Mbps) Assuming it's 1080p it needs to be no more than around 10 Mbps.
Your video needs finishing (converting) which you can do either at the end of an editing process or in a stand alone application such as Quicktime.
If it takes time to buffer, it's not mirroring, mirroring is live, it's sending the Apple TV the file which is far to large. Although you should expect some buffering.

Similar Messages

I get this pop up when trying to make a photo book in the iPhoto store. Some or all of the photos you selected were downloaded from your published albums. You can only view these photos. To use them in an album or a slideshow or project, you must import t

I get this pop up when trying to create a photo book through the iPhoto store.
"Some or all of the photos you selected were downloaded from your published albums. You can only view these photos. To use them in an album or a slideshow or project, you must import them to your photo library."
The photos I have selected have already been imported so how and why do I do it all over again?
What do they mean by published albums? I categorize them into photo albums for organizational purposes after I import them from my camera or phone. So why can't I put them into a book now?
I have over 400 photos selected for a photo book for my child's graduation gift so how can I tell which photos I have to do this to?
Please help. Any insight wouyld be appreciated.
Confused and frustrated...

Give this a try: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
OT

Some or all of the photos you selected were downloaded from your published albums. You can only view these photos. To use them in an album or a slideshow or project, you must import them to your photo library.

I was trying to Import photos from my Facebook photo to my MacBookAir and now all i got is lots of back round photo. Please Help me out to delete them.Some or all of the photos you selected were downloaded from your published albums. You can only view these photos. To use them in an album or a slideshow or project, you must import them to your photo library.

What that's telling you is that some of the photos you want to use are not in your Library but online in a gallery you have linked to. You need to download them first.
Regards
TD

TS1315 I have just purchased the new iPad with the camera connection kit. I just want to bewant to be able to insert my SD card into the Pad and only view my photos, not import them to the pad. Can this be done and how do I do this. Please advise. Thaj

I have just purchased the new iPad with the camera connection kit. I just want to be able insert my SD card into the Pad and view my photos, not import them.Can this be done and how? Please advise. Thank you.

See this article: iPad: Using the iPad Camera Connection Kit
No, this canot be done, afaik. When your camera or card is connected, you will see the thumbnails in the camera pane, but not full size preview. So to browse your photos on the iPad you will need to import them to your camera roll. But you need not delete them from the camera or card after importing, so you might simply import selected photos to your camera roll from the camera grid and then delete them again from the camera roll after importing and browsing, without removing them from the card/camera.
Regards
Léonie

Updated iPhoto 11 and cannot open Events with double click or any other way. I can only view those photos by creating an album from all of them, then I can open the album and edit or delete etc. Any one have that problem?

After upgrading to iPhoto 11 and the latest upgrade 9.4.1 (701 67) I cannot open any Event. The normal double click does not work, nor anything else I have tried. The only way I can view the photos in an Event is to make an Album of it, and then I can easily open it with a double click and edit and delete, arrange photos etc. Anyone have this problem. Any ideas about how to open an event?

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

How to view a dvd via airplay

I'm very surprised that it isn't possible to look a bought dvd via airplay on apple TV.
In the shop they told everything what you look on the imac you can mirror via airplay and apple tv on a tvscreen or beamer!
But it doesn't work with a simple moviedvd!
What is Apples solution to look a simple dvd via apple TV. I mean there is a very good and a very usable technik but it is not to use to look a dvd???
Thank you and best regards
Michael

It is not possible.

Trying to create a slideshow from a current album in iPhoto 11, but it tells me "the photos you selected were downloaded from your published albums. U can only view these photos. To use them u must import them" What do I do? I have already imported them.

If i already imported the pictures from my cameras SD card and placed them into an album why is it not letting me make a slide show with these pictures.

Give this a try: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
OT

How can I show photos from aperture via airplay?

We try to show the photos via airplay to apple TV. now does that work?

Hi Bob,
I am trying to do it like the instructions by using iTunes to show photos from my Aperture library. When I select this in iTunes no photos are linked and thus I cannot show them using my Apple TV. Are you streaming directly to your Apple TV from the Aperture application?

Importing only a "selected few photos".

Hi guys:
I now have the 10 version of elements (upgraded from 4.0) and I am lost. In the 4.o version I could select import photos and it would le me selrct the photos I wanted to import from my SD card and what file to place them into. In the 10 version it asks me to import and and does "not seem" to give me the optuion to only import the photos that I want from the SD card. Any help would be appreciated. Thanks in advance.
the dog

Ignore the last question..... I found the "advanced dialog" button allows me to only import selected photos. Thanks.
the dog

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?

SamanthaR22 wrote:
How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder? [Emphasis added.]
The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with. "Picture" and "Photo" now mean different things in different contexts. In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do. Understanding is the path that allows us to do it.
All pedantic, but please stick with me here .
You record a set of instantaneous data with a camera.
That data is processed by your camera and saved to a file.
The file format is usually either RAW or JPG.
You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
Aperture links the Image and the imported file.
The imported file is called, within Aperture, an Original.
Every Image has an Original.
The Image is not the Original. The Image is what you see in Aperture.
The Original is a file that is stored on your computer.
You can make changes to an Image.
Aperture calls these changes Adjustments.
Adjustments are saved to another file attached to the record in the database. Let's call this file the Changes File.
Aperture uses these two files attached to the record in the database to create the Image.
Image = Original + Changes File.
The Image is not a file.
Because the Image is not a file, it cannot be shared with other programs. It exists only inside of Aperture.
In order to share an Image with another program, you must first create a file of the Image.
You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
You may ask, "Why all the complexity? Why doesn't Aperture save Images as files?" The answer is simple: Images can require less — and in many cases very very much less — storage space than files of Images. Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file. The gain in storage efficiency is huge. The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
Here is your question reworded with more precise terms:
SamanthaR22 might have written:
How do I access Images in my Aperture Library in the Finder? I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
No, there is not. Images exist only in Aperture, and are not accessible for use in other programs. You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
Aperture does allow you to create and save within your Library share-able files of your Images. These files are called Previews. You specify the file parameters in Aperture Preferences on the Previews tab. These files are available to other programs via the OS X Media Browser. These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
HTH.
—Kirby.

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

How do I import or move multiple selected photos to an existing album in iPhoto 9.6? In previous versions I could select and drag multiple photos into an album. Now I can only move one photo at a time. Help!

Try this general troubleshooting procedure:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

My Viewing area only shows one photo at a time now :(

Yesterday I noticed that my viewing area only shows one photo at a time. It used to display thumbnails of all the photos in the selected event - or library. Now, I'm forced to scroll down and view them one at a time or go into edit mode to see some thumbnails across the top of the screen.
Did I accidently do this? Was it part of an OS update? (I've been away for a month and just don't think I did anything to cause a change...) Can anyone tell me how to view all the thumbnails in the viewing area again?
I'm using iphoto 08 version 7.1.5 (378)
I would very much appreciate some help with this.

Thank you so much!! I love simple answers. I actually spent a few hours on this - seemed to play and test all the settings - and I just didn't understand this application of that slider.
Thank you again.
I'm very happy.

Can you block certain photo galleries so people can only view certain ones?

If I create a website in iWeb and I want to post a photo gallery that I have uploaded to my mobileme account, is there a way to have it so that people who click on that gallery can ONLY VIEW THAT SINGLE gallery, and not be able to see any of my other online galleries?

Yes, you can. There's an option in the gallery's setting, "Hide Album on my gallery page", which will isolate it from the other galleries, both on the main gallery page and in that particular gallery. This gallery is an exmaple of that.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

HT5361 When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?

When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

Select a photo via buttonGebruiker van Formulier een afbeelding laten selecteren en dit in formulier invoegen.

I am working on a form where in the user should be able to select a picture/photo via a button in the form. The button should then open a new window in which the user can select his or her picture/photo. So n the form I am making I thought to insert a button and give it the action for opening a selection window. Only after making this button I found out that the wanted action is not available.
Can I add this action, or am I thinking in the complete wrong direction?

See: https://answers.acrobatusers.com/Is-create-form-users-upload-photos-form-q195128.aspx

Only view selected photo via Airplay

Similar Messages

Maybe you are looking for