Only working with Ethernet...help!

Express only works with ethernet cable into Extreme...not recognized by Mac wirelessly by itself. Any advice?

I also just noticed that Software update and Safari is not working either. Yet I can surf (and posting this) using Firefox. Problems with my network settings?

Similar Messages

  • Wi-fi only works with Ethernet cable

    Hey guys!
    I'm using a MacBook Pro 15" 2.2 GHz Intel Core i7, with Lion. My wi-fi works fine at home and several other wi-fi spots, but at work it seems that it can only access the internet with an Ethernet cable plugged in. Immediately after I unplug the ethernet cord, the wi-fi bars turn grey with a exclamation mark on top of it, displaying that there's no internet connection. I'm pretty sure it has something do to with IP address recognition or something like that, I just can't fix it!
    The wi-fi at work works perfectly for everybody else, both mac and PC users. Help?
    Cheers,

    check which wifi router they are using. I had a linksys with that issue, and the firmware was old. It would connect, but no internet.
    also
    try setting up your tcp/ip with manually adding a ip address, similar to an address that works on other devices.
    if u check you automatic dhcp ip and it starts with 169 then u know that its Class B (APIPA) address. This range is use in Zero Configuration Network and wont have internet. try to fix it manually.

  • Mail only working with Ethernet, no wireless

    I have 2 pop3 accounts in mac mail. All of the sudden they stopped working if i'm connected via wireless (any wireless, tried several in different locations, new ones too).
    But if i hook up an ethernet cable, it will work. What gives? I'm on a MBP Pro, running 10.6.1

    I also just noticed that Software update and Safari is not working either. Yet I can surf (and posting this) using Firefox. Problems with my network settings?

  • My WRT54G only working with ethernet to computer not wirelessly

    I have a WRT54G wireless broadband router.
    I used to have an ethernet cord from my computer directly to the modem and my sister went online using the wireless signal. I recently changed modems, my sister used the wireless signal for about two weeks. But later when I hooked up my ethernet corded into the back of the router (at first slot 1). My sister could never find the wireless signal. I tried restarting every thing. Not hooking up my ethernet cord, and just trying to get the wireless signal. Didn't work. Help please.

     I assume you are using windows XP operating System... So follow this steps ....
    Uninstall the drivers for the Adapter from start >> All programs ....
    >> Insert the Setup CD in the cd drive>> Click on Exit when the
    Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
    that pops up on your screen>> Click on “Install software
    automatically “, and then click on next. Once the installation is
    complete>> Right click on the wireless network connection icon in the
    system tray besides the clock >>Click on view wireless networks and
    then connect to your network name.

  • Wake on Lan works with Ethernet, not over Wi-Fi.

    Hello, after several months of tests I came to this conclusion.
    Wake on Lan only works with Ethernet for my iMac. Wake on Lan over Wi-Fi works for a few hours, but if the iMac is asleep for 6 hours or so, it becomes unavailable... On the other hand, with Ethernet it's always available even if it sleeps for an entire week.
    My iMac isn't that old (mi-2011), so I guess it should handle Wake on Lan over Wi-Fi. Is it a software issue?
    - I've got a MacBook Pro since Snow Leopard 10.6 and now with Mountain Lion it handles Wake on Lan over Wi-Fi without problem.
    - I've got my iMac since Lion. Does the iMac only handle Wake on Lan with Ethernet and works differently compared to the MacBook Pro?
    I prefer to use Wake on Lan over Wi-Fi because for the tests I've placed my iMac in the living room in order to plug it to the Time Capsule, but the right place for my iMac is in my bedroom.
    I tried to change the MTU size as it is described here: http://osxdaily.com/2012/08/02/fix-os-x-mountain-lion-wireless-connection-proble ms/
    Note that "Wake on Lan" is checked in my System Preferences, I don't think it's my router's fault, because my Apple TV, AirPort Express, iPhone 5, iPad 2 and my Printer don't disconnect even when they're asleep (I'm talking about my printer and Apple TV in that case).

    loïcfernandezcastrillon wrote:
    I'm connected with the WiFi of my Time Capsule (bridge mode). I have this configuration since Snow Leopard, and no troubles...
    I understand that, but if your router is not an Apple AirPort Base Station then it introduces an element of uncertainty. Apple has implemented many changes related to wireless networking recently.
    You are complicating matters by changing networkoversleep:
    networkoversleep - this setting affects how OS X networking presents shared network services during system sleep. This setting is not used by all platforms; changing its value is unsupported.
    Solving problems like this requires that you simplify your network environment and eliminate its unknowns. Using third party routers and making unsupported changes runs counter to simplification.
    The iMac stays connected to the Time Capsule about 6 hours during sleep. Then it dissapears...
    The iMac wakes periodically (every few hours) to inform your router of its network presence for Wake on LAN demands. Try changing your router's DHCP lease period to something longer than a few hours. For a home environment, a few days is more appropriate. This may not solve the problem, but it is better than making unsupported changes to your system.

  • Help my MBP 2011's USB ports only work with powered devices

    Hey.
    My USB ports are only working with powered devices ( such as an interactive white board) they are not working wiht a USB modem, it picks up but doenst have the energy to dial out. it also doesnt work with a flash drive.
    this is only recent after i updated non vital programs such as printer things.
    now the other problem is that i have not updated this too recently but i dont mind losing some info.
    ps. i have done all of the restarts such as smc, ram. pram. the only thing i have not done is take out the batt. but thats becuase its really hard to do and there are warnings all over it saying dont remove.
    p.p.s i am running snow10.6.8
    Please help becuase i need it to help teach some of my stundets and not being able to use a USB or the internet to research is impeeding my planning.
    Thanks so much in advance
    Andrew

    One final detail. it is a 2011 early model. if there is any more details that you want please ask. i am very desperate because i dont want to take it to apple unless i have to.

  • My Telus wireless only works with WEP, but if I switch to WEP the wireless goes down on the other Windows computer being used in the same house.  Is there a way for both of us to get wireless internet or do one of us have to be connected by the ethernet?

    My Telus wireless only works with WEP, but if I switch to WEP, the wireless on the other computers in the house (which is Windows and WPA) stops working. My computer works with the ethernet cord but I want to be wireless too!  Do one of us have to sacrifice our wireless?

    For assistance in getting your MacBook to connect to a WEP-protected wireless network, please check out this Apple Support article: AirPort: Joining an encrypted WEP or WPA Wi-Fi network

  • Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

    My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

    one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file.  Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing  even though I have the auto sync feature turned off.
    This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
    Then if I try and play the music I just transfered, the iPod says there is no music loaded.
    Ideas?

  • Boot Camp won't make a Windows XP driver disc, OS X disc only works with Win7

    First time Mac user. Just got a new Macbook Pro.
    I have successfully installed Windows XP on the Mac using Boot Camp. But I need the driver disc. The right mouse button doesn't even work and Windows is impossible to navigate without that. The disc eject button does not work, one has to eject a disc using laborious menus. Very frustrating.
    When I run Boot Camp it only has the option to make a Windows 7 driver disc. I don't see any way to make a driver disc for Windows XP.
    Everywhere I have searched on the Net the information says to put the OS X Leopard disc in the drive when WinXP is running and it will automatically install drivers. When I try that a window comes up saying it only works with Windows 7.
    This web site shows screen shots of a Beta version of Boot Camp that makes Windows XP drivers discs.
    http://www.askdavetaylor.com/how_do_i_install_windows_xp_on_my_mac_using_boot_ca mp_1.html
    How can I make a Windows XP driver disc?
    I really hope Apple didn't discontinue/eliminate the option to make a Windows XP driver disc altogether, forcing everyone to use Windows 7 only...
    Is there a way to install an older version of Boot Camp over the latest version I'm running? Where would I find it?
    Macbook Pro
    OS X 10.6.7
    Boot Camp 3.0.4
    Thank you for your time in helping me on this.

    The retail OS X 10.6.3 DVDs unlike your OEM DVD does have a complete set of drivers for $29 w/o having to deal with questionable bitorrent.
    Microsoft EOL'd XP and Vista SP1.
    Your Mac has Intel Thunderbolt and you don't see Apple doing backward compatibility. You can't run 10.5 on new Mac. So yes it comes with those limitations, but XP is also 20x more vulnerable, IE9 is more secure and XP has not kept up with the latest hardware, besides which I don't see a place or need for a 32-bit OS, any platform today.

  • I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

    I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

    Static_Unit
    I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
    Don't Have Serial Number for Premiere, Only Photoshop?
    Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
    In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
    I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
    The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
    Thanks.
    ATR

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

  • IPad is only works with changer , when I unplug it's not working

    My iPad 3 is only works with changer  when I unplug it's not working and not connecting to the PC even please some help?

    Hi,
    "But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
    If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
    The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
    of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
    Regards,
      Thorsten

  • Itouch sound not working - only works with earbuds

    I recently purchased an Itouch and the sound only works with earbuds? Please help, what am I doing wrong

    nothing, there aren't any external speakers on the touch so you will only be able to hear music, etc with the earbuds. i assume that is what you are talking about. unless you are having problems when it is connected to a docking station with speakers.

  • NB520, Replaced display, only work with AC power, not work with battery

    Hi
    I just replaced a broken display on my 7 months old Toshiba NB520 and now it only works with AC power.
    The battery icon shows 52% but not charging.
    When I plug out the AC power, it turns off.
    Help

    Please help guys. I dont know what more to do...

  • SOAPException: Local provider only works with URLEndpoints

    Hi,
    I'm writing a JAXM client that uses a messaging provider. Right after the message is sent out by providerConnection.send( ebxmlMessage ), I get an SOAPException:
    javax.xml.soap.SOAPException: Local provider only works with URLEndpoints
    at com.sun.xml.messaging.client.p2p.HttpSOAPConnection.call(HttpSOAPConn
    ection.java:77)
    at com.sun.xml.messaging.provider.ToBeSentProcessor.processMessage(Messa
    gingProvider.java:298)
    at com.sun.xml.messaging.provider.MessageProcessor.run(MessagingProvider
    .java:227)
    [ERROR] MessageProcessor(toBeSent) - -Processing Message Failed <javax.xml.soap.
    SOAPException: Local provider only works with URLEndpoints>
    I used jwsdp ea2 for developing the JAXM client. I'm confused by the exception, because I used ProviderConnection and got an exception for Local Provider (SOAPConnection).
    Any comments?
    Thanks!

    Hello Subaru,
    Now i am also trying to send ebXml messages using JAXM provider connection.I have configured provider connection using provider admin tool.
    But getting an error as follows
    provider(toBeDispatched) - -Processing Message Failed Client http:/localhost:8080/ebXMLServerCom/ebXMLServerCom Not Connected
    My jwsdp version is 1_0_01. I think in 1.2 there is no support for JAXM right?
    Could you please help me?
    Reshma

Maybe you are looking for