Onpen line item indicator in GL account

Hi,
The GL account was not intailly active for open line item management. there was some posting made to that gL account. Later all the posting of that particular Gl account was reversed. now the balance of the GL account is zero. Now i tried to change the GL account to activate the open line item indicator. I encountered an error stating the account balance is zero but open iten still there.
can you please advice me on the same.
Thanks

Hi,
Execute this program:RFSEPA02 can resolve this issue
all the best
Prasad

Similar Messages

  • Unable to see line items in segment clearing account

    Friends,
    Why we are unable to see the line items in intersegment clearing account/zero balance clearing account, eventhough the master is maintained as open item  and line item display.

    Hi,
    I have received the following error message.
    Account 1999990, company code xxxx is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.

  • Duplicate line item in Statement of account

    Dear All,
    Why there is duplicate line item in Statement of account?

    Hi Ajit,
    In your ECC system follow below path and set Availability check rule to "B" (full delivery).
    SPRO --> SD --> Basic Functions --> Availability Check and TOR --> Availability Check --> Availability Check with ATP Logic or Against Planning --> Define Default Settings
    Select your sales area and set Availability check rule to "B" (full delivery).
    This should fulfill your requirement.
    Rgds
    Sourabh

  • No line item display possible for account

    Hi Guys
    No line item display possible for account in FBL3n T code

    Hi
    Go to FS10N and check whether account balance. If there is balance on the account you need to Journal entry to make balance zero. Go to FS00 and tick line item display option. You can not select line item display option untill the balance is zero.
    Hope this will help

  • No line item display possible for account -fbl3n

    Hi,
    No line item display possible for account ,
    i'm getting the abv error when run fbl3n .. pls tell , how to resolve it..

    Dear,
    It means no data found for your requirement.
    If you want to find out the list on base of G/L please enter G/L and click on all item.
    Other wise if you want to see only open item then click on open item and remove date from field of open item date.
    Also click on noted item and click on execute button
    Regards,
    Mahesh Wagh

  • Separate line item for taxes in accounting document of MIGO

    All SAP Gurus,
    As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
    Similarly is it possible to have separate line item for tax amount which is inventoried.
    Regards,

    Hi Rajan,
    Freight is from pricing procedure whereas tax is from taxing procedure.
    Tax cannot be shown in separate g/l in MIGO.
    Reason:
    If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
    I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
    U can also try doing the same and then check.
    Reg
    Raja

  • Customer line item report with GL account display

    Hi
    Please guide some customer reports for the following
    Client need a Customer Line item reports with Customer number and repective gl account for each line items.
    for ex: Product A/c xxxxxx
              To Sales A/c xxxxxx(recon A/c)
    Thanks in advance

    Hi
    1.FBL5N -  Customer Line item Display (Customer Line item reports with Customer number )
    2.FBL1N - Vendor Line item Display
    3.FBL3N - General Ledger Line item Display
    The sales entry will be
         DR  Customer - to view this entry FBL5N
               CR Sales - to view this entry FBL3N
    Hope this will be usefull

  • Clearing of open line items in Exchange Vendor account

    Hi Friends,
    We have an issue related with the clearing of open items from the exchange vendor account. Details of issue are as follows,
    We have two open line items in an exchange vendor account (T-code FBL1N) pertaining to the Logistics purchase invoice and a credit memo. These documents are very old documents posted in the year 2005. When user tries to clear or net these documents using T-code FB1K( using the current period), SAP generates the clearing document, i.e. it gives only a clearing document number and sends an email to user stating that update has been terminated. When we try to view the clearing document so generated using T-code FB03, system do not finds it, i.e. it is actually not in system / tables. Also most important thing these open items continues to appear in the vendor account, i.e. they are not getting cleared.
    Some of our observations about the related exchange Purchase Order is that, this PO has document date 03/31/2004 having qty. 5659 GA. The very first GR and related invoice is also having qty 5659 GA and posting date of 03/31/2004. After this user had again created above mentioned documents that are in question i.e. invoice and credit memo. These documents were posted on 04/12/2005 for the qty of 22592 GA (Even though the PO qty is 5659 GA).
    Now we would like to know what would be the probable reason for these open items not getting cleared from the vendor account. Please note user also tried to clear these documents using F-44 T-code but no luck.
    Thanks,
    Ritesh/Ninad

    Hi
    Have you tried by changing the Base line date while cleaing the vendor account. ?
    Satish

  • Non Deduction of TDS in Case of Open Credit Line Items in GR/IR account

    Dear Experts,
    I would like to request you to please give ur suggestion/advise in the below issue:-
    In our earlier legacy system(oracle) we used make provision entry based upon the activity done & certified by respective non finance dept by(against which vendor invoices are not received before month closing):-
    On the last day of the month:-
    Handling Exp    Dr
    Ware House Exp Dr
    Other many Exp  Dr
    Current Liab & Prov A/c Cr
    As per IT dept we have to deduct TDS at the time of crediting the vendor or any other suspense a/c and deposit it by next month by 7th day . To avoid non deduction of TDS against such provisional expenses we used to reverse the same entry on the 1st of next month:-
    Current Liab & Prov A/c Dr
    Handling Exp     Cr
    Ware House Exp Cr
    Other Exp           Cr
    Now in SAP we r not doing manual entries like above:-
    The entries are huge and so many Exp get debited & GR/IR A/c get credited. Thus there is a very much possibility that the IT person or IT Auditor treat it(GR/IR) as suspense a/c and can give comments on his report about non deduction/deposition of TDS.
    In SAP there is an option to transfer all these credit open items into an clearing a/c and reverse it in the 1st of next month. But that time entry will be a sunder:-
    On the last date of the month
    GR/IR Account   Dr
    C/L Prov Clearing A/c  Cr    (It will be created)
    On the first date of the month
    C/L Prov Clearing A/c  Dr
    GR/IR Account           Cr
    But again C/L Prov Clearing A/c can be interpreted as a supense A/c.
    We need entries like under:-
    On the last date of the month let all credit open item of GR/IR as it is.
    On the first date of the next month all Credit Line items document to be reversed and again reposting of same on the same day.
    I,e all Exp to be credited
         All GR/IR to be debited  
    (Revarsal of all open GR/IR credit line items) on 1st of next month
    On same day again the original entries which are reversed to be created
    All Exp to be deited
    All GR/Ir to be credited.
    Whether above is possible, if not then how other companies in India are handling the issue.
    Regards,
    Alok

    Dear ,
    Try t-code J1INPR and J1INUT for the same as per below explanations.
    Regards,
    Kalpik

  • Transfer vendors line items from old reconcilation account to the new one .

    Dear All
    I have changed the reconciliation account for a group of vendor i want to know if its applicable to post my previous line items that located in the old reconciliation account to the new one automatically or meaningfully  if there is a transaction that will help me to do that.
    Thanks

    Hi,
    yes you are right. The customzing TC is OBBW. For your corresponding Recon. Account you have to asign the offset Account.
    At month end you can then start the business transaction to re-classify Rec. A/P or A/R to the correct G/L Account with the mention parameter. So for your Balance Sheet reporting and for the reconcilation Sub/Ledger Main Ledeger it ok then.
    If you need further informaion just let me know.
    Regards,
    Sebastian

  • Line item display on GL account

    DearAll,
    my GL is line item display already,then there are transactionts posted in that GL,but still no line item display?and i have to run RFSEPA01.
    but GL is line item display already,why still need that program to update the relevant table

    HI dear
    Plz chk when the line item display has been activated for that Gl account.
    If that has been activated in the mid of year/month you will not able to see the line items that are posted prior to activation
    so i can suggest you to deactivate the line item display and activate again
    It will work
    Thanks & regards
    Prasad

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Tracing the line item change in a accounting document

    We have to send accounting document line items details which have been created or changed to non-SAP system.
    I am looking for way to identify the line items which have been changed as I don't want to send the other line items of the accounting documents which are not changed.
    Thanks.

    Shailendra,
    You've hit the nail on the head - CDHDR and CDPOS are the central repository tables that contain all changes - wherever logged.
    There's no other way.
    P.S.: I'm assuming you know how to extract data from these tables - so am not going into it.
    Remember to assign points if found useful.
    Regards
    Gulshan

  • GL line item display FAGLL03 Offsetting Account Blank

    Dear All,
    In T-code FAGLL03 GL line item display offsetting account is coming Blank, how to get the offesetting account in GL line item display, what is the offsetting account
    Regards
    KSP

    Hi,
    It is diffcult to get offsetting account details in standared reports. by using BTE you can able to achive.
    Read: OSS Note 112312
    Refer: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b96fed-eb5d-2e10-1792-f3ff9f65df8a?QuickLink=index&overridelayout=true
    what is Offsetting A/C:?
    Ex: Administration Exp a/c dr (GL:5000000002)
           Bank A/C (GL:100000004)
    If user execute Admin Exp GL(5000000002)  report, he will expect another line GL account (GL:100000004).
    Regards
    Viswa

  • Miro line item indicator

    Dear Forum,
    In miro line item, there is a drop down list on indicator. There are 3 item to choose from but I would just like to ask on
    1 planned delivery costs
    2 goods/service items + planned delivery costs
    What is the implication of choosing 1)planned delivery costs or 2)goods/service items + planned delivery costs?
    Thanks

    hi srina,
                   when we say that we only want to settle the planned delivery cost, then we go for settling the planned delivery cost,
    now the question arrises that why do we go for settling this only, this is done when u have ur main vendor different from the supplying vendor, generally at that time we settle both the costs differently,
    and when we have the  the main vendor acting as a the delivery vendor also, then we settle both the cost together...
    Hope it helps....
    regards,
    yk

Maybe you are looking for

  • HP 2100TN, JetDirect Server, Appletalk & OS 10.4

    I have a built-in ethernet local network using a netgear hub, 3 Apple computers and HP2100 laser printer. When running Panther, I could print when connected to the internet. That is I could print an email and not lose my connection to mail. When I up

  • Mass print of detailed invoices (AR, AP)

    Hello, I would like to ask you to help me with the issue of the mass printing of detailed invoices of Accounts Receivable and Payable. I tried in FB03 but there is the only possibility to print list of invoices. I need something where I can choose to

  • Making the "incoterms" field non-mandatory

    For the time being, "incoterms" field in XD01 (Create customer) for the domestic customers is mandatory. On the other hand, I want to make it non-mandatory. How can I do it? Thanx in advance.

  • HT204379 Any way to stop and then resume a screensaver?

    Any way to stop and then resume a screensaver? TIA

  • APACHE HTTP SERVER STOP RUNNING

    TESTING ON WIN 2000 After installing IAS 9 PORTAL AND HTTP SERVER ON WIN 2000 INSTALLATION COMPLETE OK HTTP SERVER APACHE START OK BUT CRASHES AFTER A FEW SECONDS WITH ERROR MESSAGE ON WINDOWS SERVICES 'System Error 1607' DID SOMEONE FOUND THE SAME M