OnPlus Portal Logins fail

Dear OnPlus Users,
You may have briefly experienced a problem logging into cisco-onplus.com and/or onplusbeta.com. This issue has now been fixed, and Cisco OnPlus is now fully functional.
We thank you for your cooperation during our resolution of this issue.
OnPlus site status is available on our Service Health Status page at: www.checkonplus.com .
Thank you,
Anna

I actually did find a solution to my request for the ability to always sort by a different column, other than Created On Date.  I selected Customize on the Overview page and unselected the Create On Date column.  Then I sorted by the Company Name, which was the one I desired.  So far, after closing out and going back in numerous times, it seems to keep that setting.

Similar Messages

  • OnPlus Portal Login

    Anyone experienced an issue with the Portal lately on login, where you get the error message "Your account is still processing, please try again later"..? This isn't a new account, it's been up and running with OnPlus for over a year.
    Thanks
    Kev                  

    I cannot access the Portal.
    www.cisco-onplus.com is not recognize by google DNS server (8.8.8.8)

  • Portal login failed due to Desktop error

    Hi all
    we are using EP 7.0.
    Accidently we made a wrong entry in the master rule for portal desktop.The entry is defined for "*" (that means for all users).
    Now nobody can log into portal.
    How am i suppose to correct that entry?Is there any way to do it using Visual Administrator?
    very urgent
    Thanks in advance
    regards
    shankar

    Hi Steffi,
    Issue is resolved.
    I didn't deleted any entries in the master rule.
    To access Content admin using below direct 1st URL, once you logon into the url and then enter second url and modify the master rule.
    http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.content_administration!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content
    Access System admin using below direct URL to access Master Rule Collection to fix the wrong rules.
    http://portal:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fadministrator!2fsuper_admin!2fsuper_admin_role!2fcom.sap.portal.system_administration!2fcom.sap.portal.system_admin_ws!2fcom.sap.portal.system_configuration!2fcom.sap.portal.portal.display!2fcom.sap.portal.wd_portalDisplayRules
    Thank you for your support!!
    Thanks,
    Naveen

  • Portal login fails without error

    Hello
    We are working with Oracle Application Server 10g on Linux. Currently we have some problems with login through the login portlet.
    After starting the Application Server, the login goes right. But after some time of inactivity (about 1h) it is no longer possible to login. After clicking the Login button of the login portlet some time goes on but nothing happens. No error message or something else appears.
    Has someone else such a problem?
    Can anybody help me?
    Regards,
    Chrigel

    Hello
    We are working with Oracle Application Server 10g on Linux. Currently we have some problems with login through the login portlet.
    After starting the Application Server, the login goes right. But after some time of inactivity (about 1h) it is no longer possible to login. After clicking the Login button of the login portlet some time goes on but nothing happens. No error message or something else appears.
    Has someone else such a problem?
    Can anybody help me?
    Regards,
    Chrigel

  • Custom Login - Failed login

    We need to run some checks against our business rules at login
    time so I have written a custom login page which calls a custom
    procedure. The procedure determines how much access the user is
    entitled to and sets the users group memmbership accordingly.
    Finally I call the Portal login procedure with the username and
    password that the user provided:
    portal30.wwptl_login.login_url(USERNAME,
    PASSWORD,
    OK_URL,
    cancel_URL);
    This works ok if the user has typed in a valid username +
    password. But if the Portal login fails the user gets thrown to
    the Single Sign-On screen. If the user now fixes his typo and
    log in again he/she bypasses the whole custom login procedure...
    The only way I can think of right now is to change the Single
    Sign-On screen, which I know is possible. But that will apply to
    the whole Portal installation and we do need several different
    custom login's, similar to the one outlined above. So we would
    have to change the Single Sign-On screen just have some text
    telling the user to login using one of the official login pages.
    Not very nice - but a possible solution.
    It would be nice if you could specify a URL to the login
    procedure for the case of a failed login. Is this something that
    is being concidered for future versions of Portal?
    Hmmm.. in case a user bookmarks a page that is not public he/she
    will still be taken to the Single Sign-On page to login. Guess
    we have to change the Single Sign-On screen after all..
    Any other ideas?

    You should develop customized login page according to the
    specification provided in the SSO Server administrator guideHello
    Where can i find the SSO Server administrator guide ??
    Thanks
    ERIC

  • In Portal Anonymous mode - Change password option not coming- login fails

    Hi Experts,
         We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
        But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
    Appreciate your help in solving this issue. I hope many would have faced similar situation.
    Thanks
    Yusuf

    Hi Yusuf.
    Do you use a standard or custom login module for your application?
    More likely the used login module does not have a logic that handles such scenario as a change of user's password.
    In this case you need to implement a custom module with a required functionality.
    Best regards,
    Aliaksandr Zhukau

  • Login Failed error while creating a CR using Universe

    Hi,
    We created an Universe in SAP Business Objects system using SAP BW as source system and we selected sales cube for the universe.
    For ex universe name is : xyz
    Now i want to use this universe in crystal reports, we are using CR2008.
    I logged in to Crystal Reports>Blank Report>Create New Connection>Universes>selected xyz universe and i got the keyfigures and chars in query panel for the selected universe, dragged and dropped some chars and kf's in to result objects.
    After this when we click Ok it is giving an error message saying that Login Failed
    We are unable to get the solution for this anybody please guide us to solve this.
    Regards,
    Pradeep.B

    Have you checked out this article:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/504a541a-8a1e-2b10-efa6-af8fb3d44e07
    It has a section on troubleshooting Universe connections.

  • Webvpn login failed

    Hi Everyone!
    I am configuring an asa 5520 (Software Version 8.2(5))  serveral clientless connection profiles and ACS 5.3 as an authentication server, this works well users on AD or local can establish a vpn connection without problem, but now i need to show just one profile (common for everybody) on the ASA portal and behind scene allocate to right connection profile depending on the authorization profile of the user, i followed the following document
    "VPN group lock using ACS 5.x.pdf", but it does not work as expected, it keeps showing "login failed"
    So i took a look on the ACS on radius authentication and  the user is authenticated, i did a debug aaa common 255, debug radius all
    everything seem to be ok, but when i use debug webvpn 255
    it shows me the following message
    asa# webvpn_allocate_auth_struct: net_handle = D0200040
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_login_resolve_tunnel_group: tgCookie = NULL
    webvpn_login_resolve_tunnel_group: tunnel group name from group list
    webvpn_login_resolve_tunnel_group: TG_BUFFER = SSLClientProfile
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
    webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
    webvpn_portal.c:http_webvpn_kill_cookie[790]
    webvpn_auth.c:http_webvpn_pre_authentication[2447]
    WebVPN: calling AAA with ewsContext (-780823792) and nh (-803209152)!
    webvpn_add_auth_handle: auth_handle = 529
    WebVPN: started user authentication...
    webvpn_auth.c:webvpn_aaa_callback[5320]
    WebVPN: AAA status = (ACCEPT)
    webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
    webvpn_portal.c:webvpn_login_validate_net_handle[2234]
    webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
    webvpn_portal.c:webvpn_login_assign_app_next[2272]
    webvpn_portal.c:webvpn_login_cookie_check[2289]
    webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
    webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
    webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name = SSLClientProfile
    webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
    webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
    webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
    webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
    webvpn_portal.c:webvpn_login_check_cert_status[2733]
    webvpn_portal.c:webvpn_login_cert_only[2774]
    webvpn_portal.c:webvpn_login_primary_username[2796]
    webvpn_portal.c:webvpn_login_primary_password[2878]
    webvpn_portal.c:webvpn_login_secondary_username[2910]
    webvpn_portal.c:webvpn_login_secondary_password[2988]
    webvpn_portal.c:webvpn_login_extra_password[3021]
    webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
    webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
    webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 1
    webvpn_portal.c:webvpn_login_aaa_resuming[3093]
    webvpn_auth.c:http_webvpn_post_authentication[1611]
    WebVPN: user: (john) authenticated.
    webvpn_auth.c:http_webvpn_auth_accept[3066]
    User came in on group he wasn't supposed to come in on!
    webvpn_remove_auth_handle: auth_handle = 529
    webvpn_free_auth_struct: net_handle = D0200040
    Any suggestion would be appreciated
    Thanks
    Jonathan

    Jonathan,
    The issue is clear, your users are not connecting to the right profile.
    Please check this out:
    ASA 8.x: Allow Users to Select a Group at WebVPN Login via Group-Alias and Group-URL Method
    The idea of having ACS authorization is to assign a specific group-policy according to probably Radius attribute 25, but if you have it working in conjuction with the "group-lock" feature, then you need to make sure that the users connect to the correct connection profile, otherwise the group-policy will not allow the connection.
    For instance:
    group-policy test attributes
         group-lock testGroup
    tunnel-group testGroup general-attributes
         default-group-policy test
    tunnel-group testGroup webvpn attributes
         group-url https://1.1.1.1/testGroup enable
    So if a user connects to a different profile which is not the testGroup and gets the group-policy named test, then the connection is going to be rejected.
    HTH.
    Portu.

  • Get-splogevent Correlation ID, login failed for "Edit My Profile" in My Profile Error An unexpected error has occurred

    Hello Community
        Edit My Profile in My Site displayed an error that "An unexpected error occurred" with a
    Correlation ID. I have tried to read the logs in the 14 hive Logs folder but unsuccessfully. 
    I was able to  understand Event Viewer logs, there was supposed to be 4 possibilities
    one was wheter UPS was running, the other was clearing the cache and the other 2 I also fixed
    I even recreated the Search Service Application, Metadata and UPS but when I fixed the problems
    the error still occurred.
        Then I used a Powershell command that displayed output but the Output doesn't make sense
    because it is saying the login failed associated with the database that was created by the Search
    Service application when it was created.
        But  how can that username be related to the Search Service database?  Below is the output:
    Area     : SharePoint Foundation
    Category : Logging Correlation Data
    Level    : Medium
    EventID  : xmnv
    Message  : Name=Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)
    Area     : SharePoint Foundation
    Category : Logging Correlation Data
    Level    : Medium
    EventID  : xmnv
    Message  : Site=/
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880i
    Message  : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
               equested by the login. The login failed.  Login failed for user Server1\User1.     at System.Data.SqlCli
               ent.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlCli
               ent.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser
               .Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkC
               opyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLog
               in(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo server
               Info, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     a
               t System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean re
               directedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
                  at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnecti
               onString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient
               .SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Ob
               ject providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sy
               stem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvi
               derInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionF
               actory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions opti
               ons)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.
               Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderB
               ase.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFa
               ctory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCo
               nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.S
               qlConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880k
    Message  : at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQu
               eryData monitoringData, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteRead
               er(SqlCommand command, Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.Schema
               Database.GetSchemaHighLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChange
               Time()     at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyM
               appings(Guid partitionID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Admin
               istration.UserProfileApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     a
               t Microsoft.Office.Server.UserProfiles.Co...
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880j
    Message  : SqlError: 'Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" requested by the login. Th
               e login failed.'    Source: '.Net SqlClient Data Provider' Number: 4060 State: 1 Class: 11 Procedure: '' Lin
               eNumber: 65536 Server: Server1\Servers
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : 880j
    Message  : SqlError: 'Login failed for user Server1\User1.'    Source: '.Net SqlClient Data Provider' Number: 18456
                State: 1 Class: 14 Procedure: '' LineNumber: 65536 Server: Server1\Servers
    Area     : SharePoint Server
    Category : Database
    Level    : High
    EventID  : tzku
    Message  : ConnectionString: 'Data Source=Server1\Servers;Initial Catalog=SrchSvc_DB_5e06e8c82d5446e39da18d70a5a
               7e78e;Integrated Security=True;Enlist=False;Connect Timeout=15'    ConnectionState: Closed ConnectionTimeout
               : 15
    Area     : SharePoint Foundation
    Category : Runtime
    Level    : Unexpected
    EventID  : tkau
    Message  : System.Data.SqlClient.SqlException: Cannot open database "SrchSvc_DB_5e06e8c82d5446e39da18d70a5a7e78e" r
               equested by the login. The login failed.  Login failed for user Server1\User1.    at System.Data.SqlClie
               nt.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)     at System.Data.SqlClie
               nt.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParser.
               Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCo
               pyHandler, TdsParserStateObject stateObj)     at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogi
               n(Boolean enlistOK)     at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverI
               nfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)     at
                System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean red
               irectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
                 at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectio
               nString connectionOptions, String newPassword, Boolean redirectedUserInstance)     at System.Data.SqlClient.
               SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Obj
               ect providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)     at Sys
               tem.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProvid
               erInfo, DbConnectionPool pool, DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionFa
               ctory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions optio
               ns)     at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)     at System.D
               ata.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)     at System.Data.ProviderBa
               se.DbConnectionPool.GetConnection(DbConnection owningObject)     at System.Data.ProviderBase.DbConnectionFac
               tory.GetConnection(DbConnection owningConnection)     at System.Data.ProviderBase.DbConnectionClosed.OpenCon
               nection(DbConnection outerConnection, DbConnectionFactory connectionFactory)     at System.Data.SqlClient.Sq
               lConnection.Open()     at Microsoft.Office.Server.Data.SqlSession.OpenConnection()     at Microsoft.Office.S
               erver.Data.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringDat
               a, Boolean retryForDeadLock)     at Microsoft.Office.Server.Data.SqlSession.ExecuteReader(SqlCommand command
               , Boolean retryForDeadLock)     at Microsoft.Office.Server.Search.Administration.SchemaDatabase.GetSchemaHig
               hLevelInfo()     at Microsoft.Office.Server.Search.Administration.Schema.get_LastChangeTime()     at Microso
               ft.Office.Server.Administration.UserProfileApplicationProxy.SynchronizeManagedPropertyMappings(Guid partitio
               nID, SearchServiceApplicationProxy searchAppProxy)     at Microsoft.Office.Server.Administration.UserProfile
               ApplicationProxy.GetManagedPropertyMapping(Guid partitionID, String propertyName)     at Microsoft.Office.Se
               rver.UserProfiles.CoreProperty.GetManagedPropertyMapping(String propertyName)     at Microsoft.Office.Server
               .UserProfiles.CoreProperty.get_ManagedPropertyName()     at Microsoft.SharePoint.Portal.WebControls.ProfileP
               ropertyLoader.ApplyFormattingEx(ProfileManagerBase objManager, Dictionary`2 highlightedProperties, Property
               prop, Object[] propValue, Boolean ignoreFormat, Boolean allowLinkToSearch)     at Microsoft.SharePoint.Porta
               l.WebControls.ProfileUI.LoadProfileTable()     at Microsoft.SharePoint.Portal.WebControls.ProfileUI.LoadCont
               rol(Object sender, EventArgs e)     at System.EventHandler.Invoke(Object sender, EventArgs e)     at System.
               Web.UI.Control.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control
               .LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()
                  at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Control.LoadRecursive()     at System.Web.U
               I.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint
               , Boolean includeStagesAfterAsyncPoint)
    Area     : SharePoint Foundation
    Category : Monitoring
    Level    : Medium
    EventID  : b4ly
    Message  : Leaving Monitored Scope (Request (GET:http://site/_layouts/EditProfile.aspx?accountname=Server1%User1)). Execution Time=88.6628049095625
        What does that username have to do with the database created by Search Service Application creation
    and why can't I "Edit my profile" in My Profile?
         Thank you
         Shabeaut

    Use Netmon to analyze the traffic and understand more on same
    Check available DISK SPACE on SharePoint Servers and SQL Server. On SQL Instance especially check if any databases have set Size limits.
    Did we modify something on EditProfile.aspx page. Any custom solution deployed related to search
    or mysite
    http://blogs.msmvps.com/brianmadsen/2011/12/06/sharepoint-2010-connectiontimeout-issues-from-wfe-to-profile-db/
    add the SQL Server details into the hosts file on the WFE server.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/7efeefce-129e-4a03-9ff7-900d6168952b/moss-event-id-3351-login-failed-for-user-nt-authorityanonymous-logon?forum=sharepointadminlegacy
     Running Windows sharepoint services vss writer service under AD farm account (instead of Local system) is the solution of my issue!
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca7d53d8-88e2-4a82-9978-8695a7074e5d/application-pool-identity-does-not-have-access-to-profiledb?forum=sharepointadminprevious
    If this helped you resolve your issue, please mark it Answered

  • SPNego - LOGIN.FAILED error

    Hello,
    Hello gurus,
    we have installed BI 7.0 SP15 with Portal as the java side of the BI (double stack). We have CI + 3 dia instances.
    We get the following error only on the CI server:
    LOGIN.FAILED
    User: N/A
    Authentication Stack: com.sun.security.jgss.accept
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sun.security.auth.module.Krb5LoginModule                            OPTIONAL    ok          exception             false      null
    2. com.sun.security.auth.module.Krb5LoginModule                            OPTIONAL    ok                                false     
    3. com.sun.security.auth.module.Krb5LoginModule                            OPTIONAL    ok                                false
    The problem is that the SPNego authentication is not working on that server, we get the logon screen. On the other servers the authentication is working perfectly.
    What I've checked:
    *The spn is set correctly.
    *The wizard was configured.
    Please advice,
    Dimitry Haritonov

    Are you use Windows x64? Per Note 716604 - Access to Sun J2SE and recommended J2SE options
    your 1.4.2_17 -->
    With 1.4.2_14 - 1.4.2_17 you get an exception using Kerberos authentication with WebAS Java
    Best for you open OSS call to SAP -->
    http://service.sap.com/message
    Regards.

  • Portal authentication failing intermittently post self registration

    We are in the process of upgrading from EP6 to EP7 and have hit a critical authentication problem that is proving difficult to diagnose and resolve.
    Our self registration process leads straight into user logon:
    1) the user fills in the registration form with their user ID, password etc and selects Submit which creates the user ID in our R/3 user store
    2) the user is presented with text informing them that their registration has been successful and a Proceed button which when selected authenticates them with the portal with their newly created user ID
    Step 2) above is working intermittently in our EP7 system - sometimes the process works exactly as expected others an exception is raised (com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED).
    It seems as though the cause is that the user creation process has not completed fully before the logon step.
    We tried implementing a wait step (10 seconds) following selection of the Proceed button which reduced the incidence rate of the problem but didn't cure it entirely.
    A possible contributing factor is hardware performance as we are testing the upgrade on an impact analysis system which is not as efficient as our live portal landscape.
    I've pasted the code which performs the authentication and extracts from the DIAGTOOL portal logs below which show the login module configuration (SAP standard I believe).
    Any help/advice what to try next would be greatly appreciated as we are running out of ideas.
    Thanks,
    Alan
    The following code performs the authentication and redirection to the portal user's home page:
    public void onRedirect(Event event) throws PageException {
                   getBean();
                   //Get resource bundle
                   ResourceBundle rbSetup =
                        ResourceBundle.getBundle(
                             "setup",
                             ((IPortalComponentRequest) this.getRequest()).getLocale());
                   ILogonAuthentication logonAuthentication =
                        UMFactory.getLogonAuthenticator();
                   HttpServletRequest req =
                        ((IPortalComponentRequest) this.getRequest())
                             .getServletRequest();
                   HttpServletResponse res =
                             (IPortalComponentRequest) this
                                  .getRequest())
                                  .getServletResponse(
                             true);
                   req.setAttribute(
                        ILoginConstants.LOGON_UID_ALIAS,
                        SelfRegBean.getLogonUid());
                   req.setAttribute(
                        ILoginConstants.LOGON_PWD_ALIAS,
                        SelfRegBean.getPassword());
                   Subject subject = null;
                   try {
                        subject = logonAuthentication.logon(req, res, AUTHSCHEME);
                        if (null != subject) {
                             res.sendRedirect(rbSetup.getString("REDIRECT_URL"));
                   } catch (LoginException e) {
                        SelfRegBean.setError(rb.getString(LOGIN_FAILED));
                   } catch (IOException e) {
                        SelfRegBean.setError(rb.getString(REDIRECT_FAILED));
    Full exception thrown when the authentication process fails:
    com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949) at uk.ac.ncl.SelfRegistration$SelfRegistrationDynPage.onRedirect(SelfRegistration.java:507) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172) at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115) at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) -
    Key log extracts from DIAGTOOL:
    Exception on login: 
    [EXCEPTION]
    com.sap.security.core.server.userstore.UserstoreException: Could not refresh user postsp15p
    Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "postsp15p" not found!
    LOGIN.FAILED
    User: N/A
    Authentication Stack: ticket
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false                 true      
            #1 ume.configuration.active = true
    2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
    3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok                                true      
            #1 ume.configuration.active = true
    com.sap.security.core.logon.imp.UMELoginException:
    ObjectID handed over is 'null'!
    Guest | LOGIN.ERROR | null |  | Login Method=[uidpwdlogon], UserID=[null], IP Address=[10.64.65.191], Reason=[Authentication did not succeed.]
    USER_AUTH_FAILED

    We are in the process of upgrading from EP6 to EP7 and have hit a critical authentication problem that is proving difficult to diagnose and resolve.
    Our self registration process leads straight into user logon:
    1) the user fills in the registration form with their user ID, password etc and selects Submit which creates the user ID in our R/3 user store
    2) the user is presented with text informing them that their registration has been successful and a Proceed button which when selected authenticates them with the portal with their newly created user ID
    Step 2) above is working intermittently in our EP7 system - sometimes the process works exactly as expected others an exception is raised (com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED).
    It seems as though the cause is that the user creation process has not completed fully before the logon step.
    We tried implementing a wait step (10 seconds) following selection of the Proceed button which reduced the incidence rate of the problem but didn't cure it entirely.
    A possible contributing factor is hardware performance as we are testing the upgrade on an impact analysis system which is not as efficient as our live portal landscape.
    I've pasted the code which performs the authentication and extracts from the DIAGTOOL portal logs below which show the login module configuration (SAP standard I believe).
    Any help/advice what to try next would be greatly appreciated as we are running out of ideas.
    Thanks,
    Alan
    The following code performs the authentication and redirection to the portal user's home page:
    public void onRedirect(Event event) throws PageException {
                   getBean();
                   //Get resource bundle
                   ResourceBundle rbSetup =
                        ResourceBundle.getBundle(
                             "setup",
                             ((IPortalComponentRequest) this.getRequest()).getLocale());
                   ILogonAuthentication logonAuthentication =
                        UMFactory.getLogonAuthenticator();
                   HttpServletRequest req =
                        ((IPortalComponentRequest) this.getRequest())
                             .getServletRequest();
                   HttpServletResponse res =
                             (IPortalComponentRequest) this
                                  .getRequest())
                                  .getServletResponse(
                             true);
                   req.setAttribute(
                        ILoginConstants.LOGON_UID_ALIAS,
                        SelfRegBean.getLogonUid());
                   req.setAttribute(
                        ILoginConstants.LOGON_PWD_ALIAS,
                        SelfRegBean.getPassword());
                   Subject subject = null;
                   try {
                        subject = logonAuthentication.logon(req, res, AUTHSCHEME);
                        if (null != subject) {
                             res.sendRedirect(rbSetup.getString("REDIRECT_URL"));
                   } catch (LoginException e) {
                        SelfRegBean.setError(rb.getString(LOGIN_FAILED));
                   } catch (IOException e) {
                        SelfRegBean.setError(rb.getString(REDIRECT_FAILED));
    Full exception thrown when the authentication process fails:
    com.sap.security.core.logon.imp.UMELoginException: USER_AUTH_FAILED at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.logon(SAPJ2EEAuthenticator.java:949) at uk.ac.ncl.SelfRegistration$SelfRegistrationDynPage.onRedirect(SelfRegistration.java:507) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172) at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115) at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) -
    Key log extracts from DIAGTOOL:
    Exception on login: 
    [EXCEPTION]
    com.sap.security.core.server.userstore.UserstoreException: Could not refresh user postsp15p
    Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "postsp15p" not found!
    LOGIN.FAILED
    User: N/A
    Authentication Stack: ticket
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false                 true      
            #1 ume.configuration.active = true
    2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          exception             true       Authentication did not succeed.
    3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok                                true      
            #1 ume.configuration.active = true
    com.sap.security.core.logon.imp.UMELoginException:
    ObjectID handed over is 'null'!
    Guest | LOGIN.ERROR | null |  | Login Method=[uidpwdlogon], UserID=[null], IP Address=[10.64.65.191], Reason=[Authentication did not succeed.]
    USER_AUTH_FAILED

  • Login failed - JDI

    Dear friends,
    I used to login to JDI using below URL with out any problem:
    http://<host name>:51000/devinf/main
    Since 3 days, it is not accepting the logins which I am providing.  I could able to login to portal using the same user id and password.
    It is throughing Login failed error message.
    What could be the reason? How can I resolve this issue?
    Thanks and regards,
    Lakshmikanthaiah

    Hi Lakshmikanthaiah,
    1. Check if the server is up
    2. Sometimes even if the server is up the DB might be down and hence log on fails
    3. Check if your user is locked
    Akshatha

  • User login fails : password expired

    Dear portal-gurus,
    We're having an issue with our portal 6.0 SP15 installation. When the administrator creates a new user and that user tries to login, the error message is : password expired (no chance for the user to change / reset / his password, although this setting is enabled in the security tab).
    When a user registers himself on the portal login page he can successfully login / change his password / etc.
    Any help would be very appreciated !
    Thanks in advance,
    Stefaan Ovaere

    Thanks a lot for this information... BUT...
    When I try http://<server>:<port>/index.html UME asks my user to change his password. So that works. However, on the standard login page, the only message is password expired or authorization failed (for new users created by the administrator).
    In the security.log file I can find :
    #1.5#0014224913690069000000180000126C00040BE085A1BE39#1138958849548#/System/Security/Audit#sap.com/irj#com.sap.security.core.util.SecurityAudit#Guest#0####4bea74c0949711daa2a8001422491369#SAPEngine_Application_Thread[impl:3]_20##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest     | LOGIN.ERROR     | NONE = null     |      | Login Method=[default], UserID=[stova], IP Address=[192.168.22.141], Reason=[Access Denied.]#
    But I have no clue to what this is related ! Changing the security login policy ( allow change password ) on TRUE or FALSE seems to have no effect.
    We do not use LDAP... so we're talking about pure portal users.
    Thanks a lot for your help,
    Stefaan Ovaere

  • Login failed for user 'MgmtSvc-AdminAPI' because the account is currently locked out.

    We are getting the following error on our SMA web service machine in the mgmtsvc-adminapi log file.   Im guessing I could have also posted this in the WAP forum.     Any ideas on what would cause this?
    Also, we noticed the connection strings in the adminapi site are encrypted as well so not sure what the credentials are that WAP adminapi is using.
    System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'MgmtSvc-AdminAPI' because the account is currently locked out. The system administrator can unlock it.
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
    Thanks Lance

    Just had this error happen again.   THis is the account that microsoft configured during the WAP portal install.   The connection strings in the web.config for the adminapi site is encrypted so you cant see the credentials.  
    The WAP install didnt create local computer user but does create SQL Auth user with the name of MgmtSvc-AdminAPI
    Log Name:      Microsoft-WindowsAzurePack-MgmtSvc-AdminAPI/Operational
    Source:        Microsoft-WindowsAzurePack-MgmtSvc-AdminAPI
    Date:          12/9/2014 5:07:54 PM
    Event ID:      12
    Task Category: (65522)
    Level:         Error
    Keywords:      None
    User:          IIS APPPOOL\MgmtSvc-AdminAPI
    Computer:      SMAWAPCOMPUTER
    Description:
    Error:
    System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'MgmtSvc-AdminAPI' because the account is currently locked out. The system administrator can unlock it.
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
       at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
       at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.WindowsAzure.Server.Common.SessionManager.<IsMasterAsyncInternal>d__4.MoveNext()
       at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.WindowsAzure.Server.AdminManagement.Service.CleanupRunner.MaintenanceCycleRunner.<RunCycleAsync>d__0.MoveNext()
    ClientConnectionId:13052455-e404-404b-abf9-ad4a10f270fd, operationName:, version:, accept language:, subscription Id:, client request Id:, principal Id:, page request Id:, server request id:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminAPI" Guid="{93AB61E1-C729-402F-9569-A23FB5E0B2D6}" />
        <EventID>12</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>65522</Task>
        <Opcode>0</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2014-12-09T23:07:54.084193000Z" />
        <EventRecordID>599</EventRecordID>
        <Correlation />
        <Execution ProcessID="5316" ThreadID="8120" />
        <Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminAPI/Operational</Channel>
        <Computer>SMAWAPCOMPUTER</Computer>
        <Security UserID="S-1-5-82-1634760204-2030663537-3042087576-1698961595-280283016" />
      </System>
      <EventData>
        <Data Name="message">
    System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'MgmtSvc-AdminAPI' because the account is currently locked out. The system administrator can unlock it.
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean&amp; dataReady)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
    timeout)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
    SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
       at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection)
       at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal&amp; connection)
       at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal&amp; connection)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&amp; connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.WindowsAzure.Server.Common.SessionManager.&lt;IsMasterAsyncInternal&gt;d__4.MoveNext()
       at Microsoft.WindowsAzure.Management.TaskSequencer.&lt;&gt;c__DisplayClass1e`1.&lt;RunSequenceAsync&gt;b__1d(Task previousTask)
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.WindowsAzure.Server.AdminManagement.Service.CleanupRunner.MaintenanceCycleRunner.&lt;RunCycleAsync&gt;d__0.MoveNext()
    ClientConnectionId:13052455-e404-404b-abf9-ad4a10f270fd</Data>
        <Data Name="requestId">
        </Data>
        <Data Name="subscriptionId">
        </Data>
        <Data Name="clientRequestId">
        </Data>
        <Data Name="principalId">
        </Data>
        <Data Name="version">
        </Data>
        <Data Name="pageRequestId">
        </Data>
        <Data Name="acceptLanguage">
        </Data>
        <Data Name="operationName">
        </Data>
      </EventData>
    </Event>
    Thanks Lance

  • Portal Install Fails During "Load Java Database Content"

    Hi,
    I'm installing our production enterprise portal and it is failing on
    the following step:
    "Load Java Database Content"
    When I load at the jload.log I see the following error message:
    20.06.06 14:11 com.sap.inst.jload.Jload main
    INFO: Jload -sec
    EPP,jdbc/pool/EPP,D:\usr\sap\EPP\SYS\global/security/data/SecStore.properties,D:\usr\sap\EPP\SYS\global/security/data/SecStore.key -dataDir
    Z:/NW04PortalCDs/DVD_JAVA\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\Program
    Files\sapinst_instdir/IMPORT.XML -log C:\Program
    Files\sapinst_instdir/jload.log
    20.06.06 14:11 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    java.sql.SQLException: [SAP NetWeaver][SQLServer JDBC Driver][SQLServer]Login failed for user 'SAPEPPDB'. Reason: Not associated with a trusted
    SQL Server connection.
    Our landscape is as follows:
    production portal server - serverA
    production datbase instance (clustered) - serverB
    production database server (cluster) - serverB(virtual name)The portal is sharing a database with our R3 production server.
    I've noticed that the user SAPEPPDB exists in the database as a windows
    user and I've given that user all roles in the database but it is still
    unable to connect.
    Please help.
    Regards,
    Jeff

    Did you get an answer back on this? I am getting the same problem

Maybe you are looking for

  • Instablility of Forms 10.1.2.0.2 after JRE 1.5.0_11 install

    Hi I recently reported a problem with focus to oracle support. The advice from them was that the problem was fixed in JRE 1.5.0_11. I installed on 2 pcs the new JRE and have found that forms no longer run on either pc. Oddly the behaviour is differen

  • Limit QoS

    hi! how limit speed - for windows update? WSA hardware. i find: Set action for 5 applications of type: Software Updates but not avialable - speed limit, use global setting... Software Updates Set default action for application type: Software Updates

  • How can I get my data on my homepage from Firefox 3.6 to 4.0?

    I downloaded the update to Firefox 4.0 and now much of my data does not show up on my homepage, e.g. My stock portfolio is completely missing and when I press "Menu" to make changes or refresh it doesn't work at all. This is also true on all places w

  • Can I copy macbook library to imac?

    My itunes account is on my Macbook pro where i sync my iphone, etc. I can share this library to my imac but this doesn't allow me to use that music within iweb, idvd, etc. I copied the tunes and the associated files to the imac but a message saying i

  • Oracle data profilinf export

    Hi, I dont see a option to export the entire profiling project.... we have export option only for data quality projects. I want to undetstand how Profilinf can be used in the ENTERPRISE DATA INTEGRATION process.... By creating a profiling project wit