OnRollOver - mouse too fast??

I have a simple movie clip that says PRODUCTS and the
"onRollOver" just makes the letters turn yellow. "onRollOut" makes
them white again.
But if I move the cursor over it
too quickly, it fails to trigger the "onRollOut".
It just turns yellow and stays that way.
When I move the cursor back over it, then it finishes the
"onRollOut" section.
How can I fix this?

Ive had that problem before, what I did was create a larger
button movie clip around the smaller button. The only thing that
the larger mc would have in it is an onRollOver function that would
reference the smaller button. The large button would be an
invisible one. I dont think I am making sense. THe large field
would be a gotoAndPlay(up), the smaller button would
gotoAndPlay(over) and onRollOut would for both play (up)

Similar Messages

Lion mouse scroll speed scrolling too fast

System Pref > Mouse > Scrolling Speed is set to the slowest level and it is still way too fast! Heard others complaining about this on a Parallels discussion group and thought I would post here. Incease the range of scrolling sensitivity in an update please! Reply to this post if you are having the same issue.
Scrolling was always way to fast in leopard when using Iphoto, but this with Lion it is too fast everywhere else except for huge files.

I suppose you are using a non-Apple mouse. You will need to update the software, and adjust the tracking multiplier within the software.
Logitech just came out with an update for Lion.

My bookmark menu moves too fast when I try to pick a submenu with my mouse.

My bookmark menu moves too fast when I try to pick a submenu with my mouse.
When I am trying to surf to a website using my bookmark menu and
navigating with my mouse, I click Bookmarks, then a main menu item, and then a submenu item. While moving my mouse from the main menu item to the submenu item, if I happen to stray off the main menu item briefly before I get to the submenu item, Firefox picks the wrong submenu item. I ran a utility program recently to "speedup" Firefox on the internet, but I did not want to speed up the menu operation. Please help me get the menu delay back.

You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this?

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this? This is the way I scrolled for MIDI editing on Logic 9

Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
it's here where one can configure a mouse device.
Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
Have a nice day!

Can't adjust Logitech mouse acceleration, mouse is too fast

Hi.
I have setup Arch with XFCE. Almost everything works fine, except mouse. I have Logitech M185 wireless mouse and it is too fast. I have tried to set mouse acceleration and sensitivity in Xfce mouse settings (without any affect) and via xset or xinput as described in this article, but nothing happened - it still goes way too fast.
Here is an output of xinput list (don't know why, but there is two different "Logitech USB Receiver" devices):
$ xinput --list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=10 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=11 [slave pointer (2)]
⎜ ↳ bcm5974 id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ Apple Inc. Apple Internal Keyboard / Trackpad id=12 [slave keyboard (3)]
And devices properties:
$ xinput list-props 10
Device 'Logitech USB Receiver':
Device Enabled (133): 1
Coordinate Transformation Matrix (135): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Product ID (251): 1133, 50479
Device Node (252): "/dev/input/event9"
Evdev Axis Inversion (266): 0, 0
Evdev Axes Swap (268): 0
Axis Labels (269): "Rel X" (143), "Rel Y" (144), "Rel Horiz Wheel" (260), "Rel Vert Wheel" (261)
Button Labels (270): "Button Left" (136), "Button Middle" (137), "Button Right" (138), "Button Wheel Up" (139), "Button Wheel Down" (140), "Button Horiz Wheel Left" (141), "Button Horiz Wheel Right" (142), "Button Side" (255), "Button Extra" (256), "Button Forward" (257), "Button Back" (258), "Button Task" (259), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254), "Button Unknown" (254)
Evdev Middle Button Emulation (271): 0
Evdev Middle Button Timeout (272): 50
Evdev Third Button Emulation (273): 0
Evdev Third Button Emulation Timeout (274): 1000
Evdev Third Button Emulation Button (275): 3
Evdev Third Button Emulation Threshold (276): 20
Evdev Wheel Emulation (277): 0
Evdev Wheel Emulation Axes (278): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (279): 10
Evdev Wheel Emulation Timeout (280): 200
Evdev Wheel Emulation Button (281): 4
Evdev Drag Lock Buttons (282): 0
$ xinput list-props 11
Device 'Logitech USB Receiver':
Device Enabled (133): 1
Coordinate Transformation Matrix (135): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (262): 0
Device Accel Constant Deceleration (263): 1.000000
Device Accel Adaptive Deceleration (264): 1.000000
Device Accel Velocity Scaling (265): 10.000000
Device Product ID (251): 1133, 50479
Device Node (252): "/dev/input/event10"
Evdev Axis Inversion (266): 0, 0
Evdev Axes Swap (268): 0
Axis Labels (269): "Rel X" (143), "Rel Y" (144), "Rel Horiz Wheel" (260)
Button Labels (270): "Button 0" (283), "Button Unknown" (254), "Button Unknown" (254), "Button Wheel Up" (139), "Button Wheel Down" (140), "Button Horiz Wheel Left" (141), "Button Horiz Wheel Right" (142)
Evdev Middle Button Emulation (271): 0
Evdev Middle Button Timeout (272): 50
Evdev Third Button Emulation (273): 0
Evdev Third Button Emulation Timeout (274): 1000
Evdev Third Button Emulation Button (275): 3
Evdev Third Button Emulation Threshold (276): 20
Evdev Wheel Emulation (277): 0
Evdev Wheel Emulation Axes (278): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (279): 10
Evdev Wheel Emulation Timeout (280): 200
Evdev Wheel Emulation Button (281): 4
Evdev Drag Lock Buttons (282): 0
I have played around with "Device Accel Constant Deceleration" property, but it does not affect anything.
How can I slow down my mouse?
Last edited by ch1p (2013-08-13 09:34:34)

ch1p wrote:two different "Logitech USB Receiver" devices
See thread.
Haven't used it in a while, but my xorg.conf contained:
Section "InputClass"
# Logitech VX Nano, 800 DPI
# http://forums.gentoo.org/viewtopic.php?p=6676035
Identifier "USB wireless receiver for mouse"
Driver "evdev"
Option "AccelerationProfile" "-1"
Option "ConstantDeceleration" "3.1"
Option "Resolution" "800"
Option "SampleRate" "500"
# Posted at http://forums.gentoo.org/viewtopic-p-7265410.html#7265410
# From lsusb
MatchUSBID "046d:c526"
MatchDevicePath "/dev/input/event*"
EndSection
So use lsusb and tweak it.
Or even easier, use xinput to tweak on-the-fly.

Videos play too fast on ipad - sounds like super high speed mini mouse

We just bought the ipad and when we play videos on vimeo or youtube they play at an ultra high speed like the fps is messed up - it sounds like a record being played too fast
Is this our ipad or a setting - we are worried because we do not see the problem listed anywhere else.
Thanks!

Have your rebooted/restarted your iPad? you do that by pressing the Home and power/sleep button at the same time until the slider to power off the iPad appears. Slide the slider and when screen activity stops depress the two buttons again until the Apple logo appears. When the iPad completes rebooting try again to see if that solved your problem.

Spry accordion open on mouseover with extra content if too fast

So I already did this and got the spry to open with a hover,
Go to line 213 (or thereabouts) to find
Spry.Widget.Accordion.prototype.onPanelTabClick = function(e, panel)
and change that to
Spry.Widget.Accordion.prototype.onPanelTabMouseOver = function(e, panel)
but if you move too fast up and down the menu it opens the other contents and leaves it there see webpage: move your mouse fast up and down the menu to see. How do I make sure it is completely closed. I noticed this does happen to on a Click if you switch too fast between tabs.
http://www.abbottsportslincoln.com/index.php
Thanks for any help!
Jacey

so is there really no way to fix it? My client already has that, and it's not practical, we want to be able to see all the options for the sub-menus open when we are in one of the tabs.
Let me know if there is really no way around it. I'm actually pretty sure that the background for the next tab is stuck behind the content. Take a look at this site and see how they have a delay in there accordion.
http://www.targetcenter.com/
Thanks, Jacey

Slim "Id "x" respawning too fast: disabled for 5 minutes"

Hello Everyone,
Slim "Id "x" respawning too fast: disabled for 5 minutes"
This error drives my crazy I changed to slim after the recent change of gdm.
Since I changed, when I boot my PC this error always occurs. Only solution so far is either to wait for 5 minutes or to change to another TTY#, login and try init 3 and then init 5 (which only works sometimes but most of the time delivers the same error).
The error doesn't occur when I REboot the PC.
I start slim via inittab with "x:5:respawn:/usr/bin/slim >& /dev/null"
I already tried the German Arch-Forum but got no reply.
There is a topic http://bbs.archlinux.org/viewtopic.php?id=81159 with the "solution" to change inittab
"x:5:respawn:/usr/bin/slim >& /dev/null"
to
"x:5:once:/usr/bin/slim >& /dev/null"
but this doesn't work for me, slim then refuses completly to start.
I'd prefer to use the inittab method and not the daemon method...
Thank you in advance
cl10k
PS: Sry for bad English...
Last edited by cl10k (2009-11-24 21:54:18)

Hi,
"generally" X seems to work fine. I use Openbox without any problems. If I try /usr/bin/slim from init 3 it says: "Stale lockfile found, removing it" and then nothing happens - the console just stays on.
I haven't changed my Xorg for ages, I still use the same X configuration (besides updates) that I had years ago with kdm and then with gdm. Even when I switched from gdm to slim I just follwed to wiki and changed the Inittab line from gdm to slim.
Heres my Inittab and my Xorg.conf (to be honest I'm not really fit with Xorg configuration...)
To be sure, I just created a (very basic) new Xorg.conf with nvidia-xconfig.
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Tue Oct 20 21:01:12 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG F900B"
HorizSync 30.0 - 98.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: 1280x1024_85 +1280+0, CRT-1: 1280x1024_85 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
EDIT: It seems to work now! Slim started without any errors. I will test that for some days to see if the problem is really gone now.
Just out of curiosity:
A lot seems to have changed in Xorg.conf since my old ~2years old config was made.
I had to turnoff boot logo manually and set Option "Composite" "Enable" but now everything seems to work by default?
Do you see any flaws in my xorg.conf? Any ideas for improvements (except metamodes)?
Last edited by cl10k (2009-11-25 10:47:02)

Tooltip with img title disppears too fast

The problem was already described - in 2008. Not sure if it was fixed later, but I got hit by it now.
When I go to (for example) http://xkcd.com/, and hover over image, there is tooltip shown with title attribute of the image.
The problem is that the tooltip disappears after around 2-3 seconds - way too fast to allow me to read it.
Is there any option to make tooltips stay in place until I move the mouse, or press something?
I'm using Firefox 34 on 64 bit Linux (kubuntu).

Are you using a possibly special branded Firefox version from the Ubuntu repositories or the official Firefox release from the Mozilla server?
You can find the full version of the current Firefox 34.0 release in all languages and for all Operating Systems here:
*https://www.mozilla.org/en-US/firefox/all/
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Mouse Too Sensitive in Fullscreen Apps

Normally on the XFCE4 desktop my mouse is perfect (using Synaptics driver on my Lenovo Ideapad S205) but if I open any fullscreen apps such as ScummVM, the mouse suddenly becomes incredibly sensitive and moves far too fast (and quite inaccurately too, making it hard to select some things as if the mouse is suddenly operating as a very low DPI).
This is just inside the app, if I leave the fullscreen program then the mouse if fine again.
Has anyone else experienced this before and does anyone know of a fix?

I would guess that it's a bug in SDL, and check the SDL bugzilla.
Also check the xorg bugzilla re synaptics bugs, 'cos Arch uses bleeding-edge xorg (I'm still on xorg-server 1.9.5 with patches pinched from Fedora and Mageia, because I found 1.10.x unstable).

Slides in Navigator scroll too fast

Dragging slides in Navigator to reorder my slides is nearly useless on my setup, as the slides scroll way, way too fast. Unless I have lightning quick reflexes, I find myself at the top or bottom of my presentation within a fraction of a second. Moving the slide to exactly where I want it is out of the question.
Anyone else had this problem or found a solution? I use a mouse. I don't have problems with scrolling in other applications. Changing system-wide prefs did not change this.
Many thanks / Matt

I guess that Macbook is a lot snappier than my G5. I'd like that kind of problem. You can always grab the slider to the right of the slide and drag it where you want it as slow or fast as you wish.

Parallax scrolling too fast outside of Muse preview

I'm trying to get the hang of parallax scrolling, but how it previews with Muse differs greatly from any actual browser.
I export the HTML file, it pops open in Chrome and looks great. But if I try to open the HTML file from the folder into Chrome, or preview the site after it's uploaded to the web, suddenly the scrolling is way too fast. Everything disappears with one flick of the mouse scroll wheel. It also happens in Firefox and IE.
I've tried importing scripts, but again, it effects the Muse preview, but not the actual site in the end.
Is this a common problem? How should I approach to work around this?
Thanks!
I'm using the latest version of Muse. Chrome is up to date. I am on a Windows 7 computer.

Hi,
This is an odd issue. Please provide your site URL to test it. You can publish a trial site on Business Catalyst.
Regards,
Aish

Just updated Firefox, not sidebar scrolls too fast.

I just updated Firefox. Now when I hold down the vertical scrolling arrow at the bottom right of the page it scrolls faster than it used to. It's too fast. How do I slow this down?

There are extensions that work both for the mouse and the keyboard to set the scroll amount, but they can only be set to scroll an amount of pixels and not to scroll one line regardless of font-size (height) of the text.
* SmoothWheel: https://addons.mozilla.org/firefox/addon/smoothwheel/

An enemy to follow me around the screen but not too fast

Hi I'm building English teaching apps but through games.
I'd like a BUG enemy to follow me around but NOT TOO fast as I have little kids of 5 years old using this,
Would it be something like get the coordinates of my HERO character and send the BUG there.
I use POINT at the moment to send my HERO to where the mouse clicks.
Could I send the BUG there as well but using less x and y increments.
Would this be too much for the processor - too much going on with music playing as well?

again, don't remove it:
var speed:Number=.99;
public function onEnterFrame(event:Event):void {
var xDistance:Number=clickPoint.x-this.hero.x;
var yDistance:Number=clickPoint.y-this.hero.y;
if (Math.abs(xDistance)>10) {
var angle:Number=Math.atan2(yDistance,xDistance);
this.hero.x+=v*Math.cos(angle);
this.hero.y+=v*Math.sin(angle);
} else {
this.hero.gotoAndPlay("static");
enemy1.x = speed*enemy1.x+(1-speed)*hero.x;
enemy1.y = speed*enemy1.y+(1-speed)*hero.y;
if (clickPoint.x>=hero.x) {
this.hero.gotoAndPlay("right");
//trace(Math.abs(xDistance));
if (this.hero.x>=clickPoint.x) {
this.hero.gotoAndPlay("left");
//trace(Math.abs(xDistance));

Logitech bluetooth mouse too sensitive

Hello!
Well, I have a bluetooth, Logitech Notebook mouse. I'm not sure of the exact model number, but I believe it's the V270, as in this mouse:
http://www.logitech.com/index.cfm/downloads/software/US/EN,crid=1792,contentid=1 1016,osid=9
I linked to the driver "download" page - that is, if there was one. True, it works just fine with OS X's built in drivers, but it's way too fast. I have moved the mouse sensitivity to the second-to-lowest point in the OS X mouse prefs pane, but it's far too fast and imprecise. If I move it to the lowest point, it's far far too slow. WIthout a logitech driver, I'm kinda stuck between having a bluetooth mouse that's too sensitive, and a Microsoft USB mouse that's a bit uncomfortable (a bit too big). My Powerbook didn't come with a mouse.
Speaking of which, I have a PowerBook 15" 1.67 G4 model, running OS 10.4.8, with built in bluetooth. I have it sitting on top of my 3/4" inch thick desk - made out of particleboard - and the mouse on the tray just below. the mouse is less than a foot from the PowerBook's optical drive, to the lower right, so's probably not an issue with bad reception.
Does anyone have an idea of how to lower sensitivity? A third-party plugin? A terminal command? Automator? Something?
Thanks a bunch,
-Dan

Woah, that was fast!
Yes, I've tried that download. It seems to be looking for a USB connection, such as one of those mice with a USB transmitter. It says "No Logitech Device Found"
That's the problem.
Both Macupdate and the logitech site link to the same program, BTW.
I'll look into Steermouse and USB overdrive, but again, No USB connection at all, since it connects directly to the built-in-USB card.
Thanks for the fast response,
-Dan
Oooh! Look at that! It's snowing! Again! (sigh....)
I'm ready for spring now....

OnRollOver - mouse too fast??

Similar Messages

Maybe you are looking for