ONS 15454 login help.

I have a ONS 15454-SA-HD that I am trying to get into. I have no documentation other than what I have found online, and no software with it. From what I am finding online is that if you do not have the software that came with the system the only other way to get into this unit is through a web browser. I tried hooking up to the serial interface of the unit but all that I get is the > prompt and nothing I type in seems to show up and I get no output.
From what I have found I would need to be using at the most Java version jdk 1.2.2.017
I have downloaded and installed this version of Java and it is the only version that I have installed on the system that I have running Windows XP.
When I try to connect to the ONS I get a message telling me to check the security settings. From what I can tell everything looks fine.
I have the latest version of IE for windows XP installed. Is this version of XP to new to be able to connect to the ONS?
I have also tried downloading and installing the one of the recommended browsers and version (Mozilla version 1.7.13) and then reinstalled the 1.2.2.017 version of Java, but it would seem that Mozilla does not see that I have Java installed when I try to connect up to the ONS through Mozilla.
Any help on getting into this unit would be very helpful.
Thanks,
Michael

It should accept the input -- relative to single-mode fibers, multimode fibers have bigger cores, and transfer light somewhat differently, so the result is that the single mode receiver will only detect a percentage of the light that a multimode cable sends it. This percentage is likely to be pretty low, especially as distance increases. I'd say odds are it will work at a distance as short as 30 meters, but you can't know for sure without trying and you'll want to keep an eye on bit error rates to make sure the receiver is getting a strong enough signal.

Similar Messages

Upgrade ONS 15454 M12 TCC2P from 9.4.03 to 10.0.11

Hello,
quick question.
I have in my lab one M12 subrack with only-one TCC2P card and I try to prepare software upgrade in customer network.
I read all procedures at: http://www.cisco.com/c/en/us/td/docs/optical/15000r/upgrade/guide/b-454a10-0-1-upgrade.html
My troubles started at point where I can select node where the software must be downloaded. The window is empty.
Target version is "ons15454.DWDM.Lite.K9.R10011.pkg".
Any idea?
Thanks
kvapa

Hi Emyrsonn,
I hope this ONS 15454 upgrade tool can help you answering all your questions
http://www.cisco.com/web/techdoc/optical/15000r/upgrade/guide/ons-upgrade.html
It seems like you should be able to directly upgrade from 9.1.x to 9.2.2.
Please let me know if you have any comments on that.
Hope it helps!

ONS 15454 error message

Hi Expert,
I have a problem with ONS 15454 error message. My CTM server detected MINOR error message "Peer to Peer Slot Communication Failure". Affected object is SLOT-1 which is OPT_BST. The alarm ID is 200551. What caused this error appear and any workaround to solve this problem?. Your kind attention is much appreciated.

Although the following alarm is not identical to the one you identified, this seems to indicate the a peer "communication failure" is hardware related.
2.5.237 PEER-NORESPONSE
Default Severity: Major (MJ), Non-Service-Affecting (NSA)
Logical Object: EQPT
The switch agent raises a Peer Card Not Responding alarm if either traffic card in a protection group does not receive a response to the peer status request message. PEER-NORESPONSE is a software failure and occurs at the task level, as opposed to a communication failure, which is a hardware failure between peer cards.
Hope this helps....

ONS 15454 design question

I have an ONS 15454 with 2 OC192 circuits that terminate into it. One goes to a downstream ONS and another to the upstream.
I need to extend the existing ring to 2 more ONS devices, but I am not sure if it is going to work the way I want it to.
Right now, each VTS24 circuit on the OC192 is associated with a POS interface on the ML1000 cards. So POS1 goes upstream, POS0 downstream (unprotected). The ML1000 is int turn trunked to a 3750 L3 switch that has the bridge groups and layer 3 addressing assigned. This is Ring0
I need to extend this ring, so obviously I will need 2 additional OC192 cards, but do these new circuits need to be associated with new POS interfaces? In other words, will I need 2 additional ML1000 cards, and if so, how would I trunk to the switch? Am I going to get into some loopy topology here?
I am new to this system, so any advice would be great.

Hi Colin,
so you want to add two more ONS devices in an existing ring.
if you can provide a topology it will be helpful,
if you just want to add two more ONS in existing ring, it will no cause any issues,
we just have to take care of circuits and need to build them from TL1 in these new nodes.
but please send topology to get an clear view.

Cisco ONS 15454 SDH

Hi,
i have 3 sites connecting together with SDH 15454 site A-B with STM-1 and from site B-C STM-16,i want to Aggregated hand-off E1's from Site A-C so site B will be trasparet site for this link.
to be source of link on site A and Drop on site C.
any help to achive this.
there is already cricte between site B-C.

You will need to verify that the cross-connect card in the ONS 15454 (sites B & C) have VC-12 grooming capabilities (XC-VXL and CX-VXC will support VC-12 grooming).
The ONS is designed to groom lower rate signals to higher rate speed lines. Thus, you should be able to aggregate the E1s from the ISPs STM1 with the E1s from Site B and drop them at Site C.
You will need to add an STM1 card(s) to Site B. Your ISP will need to provide the mapping structure of the STM1, so you can understand where the VC-12s, which contain the E1s, are located in the payload. You will then create circuits to map each E1 (the incoming VC-12s within VC3/VC4) from you ISPs STM1 at Site B, to the appropriate VC-12 on the outgoing STM16 line heading toward Site C. At Site C, you will need to map the VC-12s on the STM16 line to the appropriate port on an E1 line card.
I hope this helps. Otherwise, you will need to have someone locally assist you in the explanation.
Tom

ONS 15454 and AC/DC Converter for 220V

I am looking for a AC/DC converter for a ONS15454 for a 220V input.
The ONS 15454 datasheet indicate input current 22A maximum.
The Cisco AC/DC Power Solution datasheet indicate for ONS 15454 a medium solution.
And the same datasheet indicate the small solution is up to 32A for 220V.
Then, can I use the small configuration for ONS at 220V?
Anyone know that? Can you help me with that?
Graciela

What is the hardware configuration of your 15454 including chassis, fan and by slot?
Using the hardware config, you can calcualte the expected amperage.
http://www.cisco.com/en/US/partner/products/hw/optical/ps2006/products_tech_note09186a0080094ae4.shtml
The general power requirement of 22A provides for any possible configuration. Actual configurations may be less. I have some 454s using as little as 9A in the lab.

ONS 15454 MRC 2.5G4

Hi All,
We are trying to install the optical multirate card (MRC 2.5Gig) on ONS 15454 and found the card comming up on standby state instead of active. The version running on the sonet box is 8.5.0 ...The MRC card port 1 is installed with the OC3 SFP's but cable not attached.
Any help would be appreciated .
Regards
Anantha Subramanian Natarajan

Hi, this is normal. Just go on and enable a SFP, called pluggable port module (PPM). After the first SFP is enabled, the state of the MRC card will change to working.
Cheers
Rene

ONS 15454 Training

I am looking for cbt or knowlegeNet like traning video for the ONS 15454? Is such available? I am happy to pay :)
Francisco.

Take a look at the offerings listed at http://www.cisco.com/web/learning/le31/ase/offerings/optical/index.html
These courses are offered by partners - Global Knowledge seems to be doing most of the ONS classes. According to a search I did just now, "Cisco ONS 15454 Turn Up, Test, Provisioning, and Operation Training (OCTPO) v7.0" is being offered at several locations in the USA and Canada this year.
Other than the classroom-based training, I'm afraid your alternative is to slog through the manuals in conjunction with hands-on experience as the only alternative. Personally, I'd not recommend that path unless you have an experienced mentor to guide you along. There're a good number of complexities that are difficult to discern without guidance.
Hope this helps. Please rate helpful posts.

ONS 15454 ML Card Question

I have an ONS 15454 with an ML-100
and an ML-1000 installed. I hav
e a WAN on the ML-100 that I would like to
add a spur to from the ML-1000. How can I accomplish th
is?
Thanks,

Hi Colin,
so you want to add two more ONS devices in an existing ring.
if you can provide a topology it will be helpful,
if you just want to add two more ONS in existing ring, it will no cause any issues,
we just have to take care of circuits and need to build them from TL1 in these new nodes.
but please send topology to get an clear view.

Cisco ONS 15454 SONET MSPP

I am doing a school research project in which I am setting up an OC-192 ring for a company (contract work through AT&T). I have chosen to use the Cisco ONS 15454 SONET MSPP as my platform. The company currently has locations in Chicago and Philadelphia and connects them through an OC-12C ATM connection and they are looking to add 2 gigabit ethernet connections.
My question is what cards and parts will I need for the Cisco ONS 15454 SONET MSPP, and how much will everything cost? I have been searching the internet for components and prices and I have found it extremely difficult to find any information. Any help or tips anyone can offer would be greatly appreciated.

Nick,
You can find the HW specifications for various ethernet cards for the 15454 at the following location.
http://www.cisco.com/en/US/docs/optical/15000r9_1/15454/sdh/reference/guide/454e91_ethernetcards.htmlhttp://www.cisco.com/en/US/docs/optical/15000r9_1/15454/sdh/reference/guide/454e91_refer.html
To make sense of it all, you need to contact a Cisco sales/account represetative to help you analyze your needs, design your network and put together a price list for the appropriate cards.
If you are interested, I can get someone from the sales/account team to contact you. Please contact me directly with your contact information and geographic location so I can find the appropriate sales/account to help you. Please do not post your personal information directly to the forum.
[email protected]
-Steve Noyes

Error in ONS 15454 NE backup

Hi ,
I'm working on a GNE and subtending NE setup with ONS 15454.When i run the COPY-RFILE TL1 command parallely through a script, I'm getting the following error from the NE.
/* ERROR - -5000 - FTP Error */
Any pointers on the root cause of this error would be helpful.
Thanks,
Muthaiah

Hi.
I see, you have ONS 15454 Multishelf Node.
Do you see in CTC Substending Shelf w/o problem ?
Do you try reset Control Cards on the Node Controlleand Substending Shelf ?
Cisco use FTP for data transmission beetwen NC and SS.
Do you see same error, when download SW via CTC ?
What Control Cards ans version SW do you use ?
and what version SW you download to the NE ?
Best regards,
Sergey Suharev

Timing over an ONS 15454 SONET link.

Hello,
Are there any provisioning restrictions on passing timing over a SONET link on the ONS 15454. Here is the senario; I have an OC-48 provisioned over Slot 4, port 1-1 on an MRC-12 card. On the Line provisioning tab, I am unable to set the ProvideSync check box. I need to use the link to time a distant end node. The far link is RX the STU SSM. The local Node is set for external timing with BITS 1 and 2 active and inservice w/PRS. Is there something I am missing?
TIA,
Steve

Steve,
The OC48 port is always providing timing information to the attached device in the S1 byte of the Line Overhead.
The ProvidesSync box is not an indication of whether the port is providing timing. Rather it is an indication that that port is being used as a timing source (Line Timing). If you go to Provisioning->Timing and select that slot/port as a Timing Reference the ProvidesSync box will be checked.
I will upload a Word document with screen shots. It should help clear things up.

STM-4 Circuit Creation on ONS 15454

Hello!
How do you create STM-4 circuits on an ONS 15454?
Thanks!

Alex,
Check the Cisco On-line documentation.
The links below are for the latest SW release, but the concepts and procedures are the same for all releases
Procedure Guide, Chapter 6, Create Circuits and Low-Order Tunnels
http://www.cisco.com/en/US/docs/optical/15000r9_1/15454/sdh/procedure/guide/454e91_circuittunnel.html
Reference Manual, Chapter 11, Circuits and Tunnels
http://www.cisco.com/en/US/docs/optical/15000r9_1/15454/sdh/reference/guide/454e91_circuitstunnels.html
Hope this helps,
Steve Noyes
CSE Cisco TAC

Mixing SONET/DWDM Cards in a ONS 15454

All,
To my understanding, there are some limitations to mixing SONET line cards with DWDM line cards in the same ONS 15454 chassis. I believe one of the limitations had to do with the line card placement versus a OSC-M and OSC. I can't remember the draw backs of doing the above, but there was some negative.
Are there any more draw backs, limitaitons or gotchas?
Also, generally, the optical engineers I spoke to recommended never mixing the cards and keeping them in seperate chassis.

Hello Jason,
Mixing SONET/SDH and DWDM functions in the same chassis is a supported configuration on the ONS 15454 platform.
As was stated in the other posts, you would have to install the SONET/SDH crossconnect cards in the chassis in order to have the HO/LO functionality.
You are right, that there is an impact on the card placement in the chassis, however you can force the planning tool (Cisco TransportPlanner) to leave the required slots for the XC cards empty when designing the DWDM network.
The model described so far is what is commonly referred to as a "hybrid" node.
There is one other element in the toolchest however - The ADM-on-a-Blade (see http://www.cisco.com/en/US/partner/prod/collateral/optical/ps5724/ps2006/ps5320/product_data_sheet0900aecd805f0e80.html). This network element is an integrated part of the DWDM personality of the ONS 15454 and provides SONET/SDH switching and client ports on the blade. Please note however, that this network element provides only a high-order crossconnect.
It is generally true that one would usually keep SONET/SDH network elements in separate chassis. However, from a network management perspective these separate chassis can form a single node.
Hope that helps
/Dirk

Can you Monitor an ONS 15454 with Mars?

Can you Monitor an ONS 15454 with Mars? Is there a specific "Device Type" to use in order to do this?

ONS 15454 is not a supported device on MARS.
Here is the supported platform on MARS for your reference:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.1/compatibility/local_controller/dtlc6x.html
Hope that helps.

ONS 15454 login help.

Similar Messages

Maybe you are looking for