Ons daemon from onsctl is not starting

I have a problem with ons daemon on oracle RAC 10.2.0.3 on linux Rad Hat 9.2
the describe situation is:
in the crs_stat -t all the statuses are online
but using onsctl utility the ons services are not running on the two nodes
if i tried to start the ons services using onsctl utility , the crs...ons services became offline.
What is it the problem?
I think it is a issue with ons service of oracle version(10.2.0.3).
Have anyone met this issue?
Thanks,
Mihaela

Hi Murali,
Actually i am trying to setup FastConnectionFailover capability on my Oracle Application Server. And as per the document/guidelines i am following i had to verify that ons is running by using onsctl ping command.
The problem is that if i run the above command on any of my RAC machines i get "ons not running" message in the output as below. Please note that i have 2 db machines setup on the RAC environment which are being correctly displayed in the output
Number of onsconfiguration retrieved, numcfg = 2
onscfg[0]
+{node = db1, port = 6200}+
Adding remote host db1:6200
onscfg[1]
+{node = db2, port = 6200}+
Adding remote host db2:6200
ons is not running ...+
LET ME also add that doing "srvctl status nodeapps -n <node name>" on each of the RAC nodes does display that ONS daemon is running...fyi the info displayed is as below
VIP is running on node: db2
GSD is running on node: db2
Listener is running on node: db2
ONS daemon is running on node: db2
Why is this inconsistency where in one it does display that ons daemon is running whereas onsctl display "ons not running", any idea ? anything i need to look into or verify?
Thanks and REgards,
Farhan.

Similar Messages

  • Daemon Manager service does not start

    Hello,
    I have a problem with Ciscoworks LMS 3.1 ... Application was working fine but after a while it started to show errors due to some processes and services that weren't enabled. I looked over the processes and services windows and realized Daemon Manager wasn´t working. I tried to start it but just doesn't happen.
    I did it through the services window and also through a windows command prompt but results weren't different.
    I attached the screenshots about my issue. Hope they're helpful and will be looking forward your answer.
    Thank you,

    Hi,
    Actually, there is only one server working for all the modules of the application so it has been set up as standalone.
    The server has the following features:
    - Microsoft Windows Server 2003, Standard Edition, SP1
    - Intel(R) XEON(R) CPU
    - E5405 @ 2.00 GHz
    - 2.00 GHz, 1.97 GB of RAM
    Domain has been set up within the server
    Antivirus Microsoft Forefront Client Security installed
    Is there any bug that fixes that problem about the domain being corrupted??? would it be better if we skip that domain's comfiguration when setting up the server's system (although it would be like server does not belong to the network)??, Antivirus has not to be installed??? Policies from the firewall would need to be all opened (from the server to any device that is to be managed by the application???
    According to your comments that is what i am understanding, please let me know if i am wrong and therefore What would you recommend me to do???
    Thanks,

  • HP Elitebook 755 G2 BIOS Update from local media not starting

    Hi All, I'm having a really annoying issue with these Elitebooks and need some help. We are trying to update the BIOS manually via USB. I have the EFI and Signature file in the location: Hewlett-Packard\BIOSUpdate and I have the BIN file located in: Hewlett-Packard\BIOS\New Now this is exactly where the BIOS is telling me to put these files on the USB. However whenever I click the accept button to start the update, it will freeze for a few seconds before returning to the main menu. The directory is right, and I've formatted the USB to FAT32 so that isn't an issue. I'm struggling to understand why it can't start the process. The USB is detected because you can see it when you go to select a method to boot from. Thanks,Josh

    There is no need to change the boot mode to legacy.  Your description tells me that you must be in a business environment.  I do find it interesting that your encryption causes issues with booting into Windows.  I have no offhand idea as to what METech software is.  Why not just remove the original hard disk temporarily and replace it with a hard disk that has a vanilla  Windows OS on it? That will take the encrytion issue out of the equation. Once you have updated the BIOS you can put the original disk back in place. If you have numerous notebooks to update doing it this way should simplify things for you.  After all, BIOS is firmware on a chip, not software on a hard disk.

  • I'm trying to cut out the introductory part of a song that I imported from ITunes and not start the song from the beginning

    Has anyone ever imported a song from Itunes and deleted the first part of the song so that it starts at a certain location?

    Sure. Drag the song into your Project from the Music Browser and drop it on the clip where you want it to start. It should appear as a ribbon underneath your video clips. You can then drag the left edge if the clip to the right, until it starts where you want it to.
    This video Tutorial may help.
    http://www.apple.com/findouthow/movies/imovie08.html#audioclips
    Another way. Once you drag in the music clip, click the gear icon on the clip to open the clip trimmer. You can change where the clip starts there.
    See iMovie Help here for all the details.
    http://help.apple.com/imovie/#mov3b0fa95d

  • CS6 Design and web Premium suite (installed from CD) is not starting up anymore.

    When starting up one of the programs, for example Photoshop, I have to "licence this software" to join the "creative cloud" via a pop up. At the moment, I'm not interested in this creative cloud. I have work to do. I installed the software legally. Please give a solution.

    Contact web chat:
    Adobe ID, sign in, and account help

  • CiscoWorksLMS 4.0 - Service Ciscoworks Daemon Manager does not start

    Dear,
    After migrating a virtual machine that hosts the CiscoworksLms 4.0, Daemon Manager service does not start.
    From what we see this error seems to be a problem in the license.
    Following is the error:
    ERROR! The license file is invalid. Please click this link for information about Obtaining a valid license or purchase click here for current licensing information Otherwise, please contact your Cisco representative for purchasing information.
    I have already entered in the User casuse group of administrators and reset the password but no use Daemon Manager service not up
    Thanks for help!

    Hi,
    From the attached screen shots, I can see the startup type are Incorrect for Many services ,kindly correct their status...
    please see below the correct startup type
    configuration for LMS Services. As you notice you see that only the
    "CiscoWorks Daemon Manager" (except the RSH/Syslog/TFTP services) is set to
    start automatically, the Daemon Manager is responsible for starting all the
    other CiscoWorks LMS services in a specific order.
    So by having the below configuration, LMS will start correctly by itself
    after Windows successfully reboots. In fact having any other start up
    configuration will cause LMS to not start, because if one of the LMS
    services starts before it dependent services, it will not come up and all
    subsequent services will fail to start as well.
    CiscoWorks ANI database engine - Manual (if Campus Manager installed)
    CiscoWorks Daemon Manager - Automatic
    CiscoWorks RME NG database engine - Manual (if RME installed)
    CiscoWorks Tomcat Servlet Engine - Manual
    CiscoWorks VisiBroker Smart Agent - Manual
    CiscoWorks Web Server - Manual
    CWCS Cmf database engine - Manual
    CWCS rsh/rcp service - Automatic
    CWCS syslog service - Automatic
    CWCS tftp server - Automatic
    If DFM installed:
    DFM dfmEpm database engine - Manual
    DFM dfmFh database engine - Manual
    DFM dfmInv database engine - Manual
    If IPM installed:
    IPM Aging Server - Automatic
    IPM DB Server - Automatic
    IPM Naming Server - Automatic
    IPM PM Server - Automatic
    IPM Stopper - Automatic
    --Change the statup type Accordingly and then REBOOT the Sever and check the issue again..
    Thanks
    Afroj

  • 3.6.16 will not start, it will not uninstall and 4.0 will not install, how do I fix this?

    I tried to revert to 3.6.16 after uninstalling 4.0 (because it deactivated too many of my add-ons). Now Firefox will not start at all. I followed the instructions that applied to me in "Firefox will not start" but it had no effect. I tried system restore but that also did not fix it. I'm having to use IE8. I do not have any Norton products. Please help.

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • Windows listener service will not start automatically

    I just installed 11.2.0.3 Standard Edition One and when I reboot the server, the listener service is not started. The service is set to start Automatically. I have to login, open services and then push start.
    The oraceServiceSId does start automatically,
    The listerner service does not start automatically,
    The dbconsole service does not start automatically,
    The processManger1 service (from middleware) does not start automatically
    This is Windows 7 64 bit.
    Any ideas?
    Edited by: brian.mcginity on Dec 10, 2011 11:25 AM

    I found where the services logs are recorded in the event viewer. Funny thing just happened, I was just about to do another reboot so I could check the logs when I noticed there were window updates in q.
    So after running the updates, the os requested to reboot . For the first time, the services started automatically.
    These are the updates which fixes the probem:
    Security Update for Windows 7 for x64-based Systems (KB2639417)
    Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2618444)
    Security Update for Windows 7 for x64-based Systems (KB2620712)
    Cumulative Security Update for ActiveX Killbits for Windows 7 for x64-based Systems (KB2618451)
    Edited by: brian.mcginity on Dec 13, 2011 9:52 PM
    Edited by: brian.mcginity on Dec 13, 2011 9:53 PM

  • SRM AS JAVA not starting(JControl.EXE and Server0 are not starting )

    Hi All,
    We have SAP SRM 7.0 AS ABAP and AS JAVA with SAP PI and MDM installed on Windows Server 2008 R2.
    When we are trying to start SRM as JAVA  from SAPMMC is not starting.
    The JControl.EXE and Server0 are not starting.
    For your convenience I am pasting error part of trace files
    Our dev_jcontrol log file text is as follows:
    [Thr 7112] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 7112] [Node: bootstrap] java home is set by profile parameter
    [Thr 7112]      Java Home: C:\j2sdk1.4.2_19-x64
    [Thr 7112] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\SRJ\JC22\exe\jvmx.jar
    [Thr 7112] JControlICheckProcessList: process server0 started (PID:4688)
    [Thr 7112] Thu Dec 15 16:43:42 2011
    [Thr 7112] JControlICheckProcessList: process server0 (pid:4688) died (RUN-FLAG)
    [Thr 7112] JControlIResetProcess: reset process server0
    [Thr 7112] JControlIResetProcess: [server0] not running -> increase error count (4)
    [Thr 7112] JControlICheckProcessList: running flight recorder:
    [Thr 7112]      C:\j2sdk1.4.2_19-x64\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID228052750 1323947582 -bz E:\usr\sap\SRJ\SYS\global
    [Thr 5568] Thu Dec 15 17:23:18 2011
    [Thr 5568] JControlSigInt: signal = 2
    [Thr 5568] JControlIStopInstance: shutting down (command: 0)
    [Thr 5568] JControlIProcessSoftKill: soft kill of process dispatcher (pid:7648)
    [Thr 5568] ERROR => invalid connect to named pipe (rc = 232) [jstartnt.c   268]
    [Thr 5568]  ERROR => Can't send soft kill (rc=-1) [jcntrxxi.c   1743]
    [Thr 5568] JControlIProcessSoftKill: soft kill of process SDM (pid:7664)
    [Thr 5568] ERROR => invalid connect to named pipe (rc = 232) [jstartnt.c   268]
    [Thr 5568]  ERROR => Can't send soft kill (rc=-1) [jcntrxxi.c   1743]
    Our dev_bootstrap log is:
    [Thr 7712] CCMS: AlMsUpload called by wp 1004.
    [Thr 7712] CCMS: AlMsUpload successful for E:\usr\sap\SRJ\JC22\log\ALMTTREE.DAT (302 MTEs).
    [Thr 7712] CCMS: CCMS Monitoring Initialization finished, rc=0.
    [Thr 7712] [Node: bootstrap] java home is set by profile parameter
    [Thr 7712]      Java Home: C:\j2sdk1.4.2_19-x64
    [Thr 7712] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\SRJ\JC22\exe\jvmx.jar
    In dev_server0 the log is as follows:
    ERROR => The Java VM terminated with a non-zero exit code.
    What should be the issue I am not getting. Please help me to solve this.
    Thanks & Regards,
    Ishan

    Hi All,
    I removed last changes i did. n restarted it.
    Thanks,
    Ishan

  • ONS not starting

    Hi,
    I have Oracle 10.2.0.1 two node RAC running on RHEL 4. Few days back I noticed that the ONS is not showing offline for both the nodes in the target.I tried starting it manuaaly through srvctl,crs_start and onsctl commands but all of them failed to start it.Rest of the services are working fine except the Enterprise Manager which ihangs as soon as I try to login.
    the Logs in $ORA_CRS_HOME/opmn/logs/ons.log shows
    For Node 1:
    2008-08-30 09:03:01.577: [ RACG][2540389664] [9107][2540389664][ora.rea-db1.ons]: clsrcexecut: env ORACLE_CONFIG_HOME=/oracrs
    2008-08-30 09:03:01.577: [ RACG][2540389664] [9107][2540389664][ora.rea-db1.ons]: clsrcexecut: cmd = /oracrs/bin/racgeut -e USRORA_DEBUG=0 540 /oracrs/bin/onsctl stop
    2008-08-30 09:03:01.577: [ RACG][2540389664] [9107][2540389664][ora.rea-db1.ons]: clsrcexecut: rc = 99, time = 540.320s
    2008-09-01 14:33:49.982: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: timeout: killed the spawned process
    2008-09-01 14:33:49.983: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: clsrcexecut: env ORACLE_CONFIG_HOME=/oracrs
    2008-09-01 14:33:49.983: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: clsrcexecut: cmd = /oracrs/bin/racgeut -e USRORA_DEBUG=0 540 /oracrs/bin/onsctl start
    2008-09-01 14:33:49.983: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: clsrcexecut: rc = 99, time = 540.770s
    2008-09-01 14:42:50.498: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: timeout: killed the spawned process
    2008-09-01 14:42:50.498: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: clsrcexecut: env ORACLE_CONFIG_HOME=/oracrs
    2008-09-01 14:42:50.498: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: clsrcexecut: cmd = /oracrs/bin/racgeut -e USRORA_DEBUG=0 540 /oracrs/bin/onsctl ping
    2008-09-01 14:42:50.498: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: clsrcexecut: rc = 99, time = 540.510s
    2008-09-01 14:42:50.498: [ RACG][2540389664] [16597][2540389664][ora.rea-db1.ons]: end for resource = ora.rea-db1.ons, action = start, status = 1, time = 1081.310s
    2008-09-01 14:44:20.093: [ RACG][2540389664] [27830][2540389664][ora.rea-db1.ons]: onsctl: shutting down ons daemon ...
    timeout: killed the spawned process
    2008-09-01 14:44:20.093: [ RACG][2540389664] [27830][2540389664][ora.rea-db1.ons]: clsrcexecut: env ORACLE_CONFIG_HOME=/oracrs
    2008-09-01 14:44:20.093: [ RACG][2540389664] [27830][2540389664][ora.rea-db1.ons]: clsrcexecut: cmd = /oracrs/bin/racgeut -e USRORA_DEBUG=0 540 /oracrs/bin/onsctl stop
    2008-09-01 14:44:20.093: [ RACG][2540389664] [27830][2540389664][ora.rea-db1.ons]: clsrcexecut: rc = 99, time = 541.100s
    Can anybody help me with what could be the problem.
    Thanks in advance
    Vijay

    Hi Guys
    In a RAC with 3 nodes version 10.2.0.3 running on Red Hat 4 64 bits, using ASM I got the following problem
    This database has been running fine for almost 2 years ,however today I got a phone call in the morning from application support because 1 CPU was taking 100%
    my first thought was a crazy query running on that node , but what was my surprise that the process was the ONS,
    my first reaction was running srvctl status nodeapps -n node
    and it was down therefore I checked its logs which is below
    2008-07-14 14:52:07.336: [    RACG][2540317952] [30757][2540317952][ora.tyocmlx0112.ons]: tarted
    2008-10-07 07:13:41.283: [    RACG][2540317952] [3710][2540317952][ora.tyocmlx0112.ons]: timeout: killed the spawned process
    2008-10-07 07:13:41.307: [    RACG][2540317952] [3710][2540317952][ora.tyocmlx0112.ons]: clsrcexecut: env ORACLE_CONFIG_HOME=/u01/app/oracle/product/10.2.0/crs_1
    2008-10-07 07:13:41.307: [    RACG][2540317952] [3710][2540317952][ora.tyocmlx0112.ons]: clsrcexecut: cmd = /u01/app/oracle/product/10.2.0/crs_1/bin/racgeut -e USRORA_DEBUG=0 540 /u01/app/oracle/product/10.2.0/crs_1/bin/onsctl ping
    2008-10-07 07:13:41.307: [    RACG][2540317952] [3710][2540317952][ora.tyocmlx0112.ons]: clsrcexecut: rc = 99, time = 540.990s
    2008-10-07 07:13:41.307: [    RACG][2540317952] [3710][2540317952][ora.tyocmlx0112.ons]: end for resource = ora.tyocmlx0112.ons, action = check, status = 1, time = 541.150s
    2008-10-07 07:22:42.574: [    RACG][2540317952] [17875][2540317952][ora.tyocmlx0112.ons]: onsctl: shutting down ons daemon ...
    timeout: killed the spawned process
    2008-10-07 07:22:42.574: [    RACG][2540317952] [17875][2540317952][ora.tyocmlx0112.ons]: clsrcexecut: env ORACLE_CONFIG_HOME=/u01/app/oracle/product/10.2.0/crs_1
    2008-10-07 07:22:42.574: [    RACG][2540317952] [17875][2540317952][ora.tyocmlx0112.ons]: clsrcexecut: cmd = /u01/app/oracle/product/10.2.0/crs_1/bin/racgeut -e USRORA_DEBUG=0 540 /u01/app/oracle/product/10.2.0/crs_1/bin/onsctl stop
    2008-10-07 07:22:42.574: [    RACG][2540317952] [17875][2540317952][ora.tyocmlx0112.ons]: clsrcexecut: rc = 99, time = 540.990s
    When I tried to bring it down the CRS didnt allow me I got errors , I had to kill the process , if I run onsctl start I dont have problems but if I use srvctl start nodeapps -n (node1) seems the reason Oracle tries to kill the process but it can therefore starting to loop against the CPU making hitting 100%
    I confirmed that if I use onsctl start/stop/debug/ping I dont have problems
    I havent applied any patch or any modification on this RAC for almost 2 months
    Any idea why suddenly stop to work or why I got those errors, I already submit this case to Oracle Support but they havent given me an answer
    Regards

  • CWMLS daemon manager service could not be started

    Hello,
    Our server in which we have installed Ciscoworks LMS was restarted due to power supply problems. After that "CiscoWorks Daemon Manager" service is not getting started. I've tried to stop all the ciscoworks related services and restart it, also tried restarting the server machine. Ciscoworks LMS Version 3.0, installed on windows 2000 SP4. The error message is:
    E:>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    I've changed casuser password using resetCasuser.exe file, but there was no change.
    Any clue?

    Hi ,
    Please attach the syslog.log ( If it is huge in size then truncate and send me some of  the Lateste logs..)
    --Screen shot of the services.msc winodw  ( with all the cisco works service)
    --Go to  start >control Panel >Administrative Tools > Event Viewer > open the Application logs and send me the screen shot of the  lastest event ..
    In the mean time try this :
    go to services.msc > change the startup type of the Daemon Manager  to MAUNAL from Automatic and
    ReBoot the Server ... Once server is back online  > change the startup type back to Automatic and Try to Restart the Daemon Manager .
    Note : Please make sure the IIS Admin service is Disable
    Thanks
    Afroj

  • When I try to open iTunes from my PC, I get a message "aps daemon.exe  MSVCR80.dll not found  reinstall"

    When I try to open iTunes from my PC, I get a message "aps daemon.exe  MSVCR80.dll not found  reinstall"
    I have redownloaded iTunes and still get the same message. It has to do with my Windows Vista in some way? I cannot sync my iPad2, iOS 7.0.4 with my PC.
    Can anyone help me? I don't want to lose the thousand and one things I've bought.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Daemon not starting

    a) Created DTP for RDA..
    b) Created infopackage by clicking RDA and assigned ..
    c) Created Daemon
    d) asssigned Damon to the package and atttached DTP..
    e) when said Start all infopackages from the Daemon.... it is not starting and the request is going to Red.
    Inititally it was green after some time., it has become red and now it is inactive. Can anyone tell me the reason.. I deleted everything and tried to created once again DTP and infopackage and Daemon.. but no use...
    Eagerly waiting for reply

    we havent resolved the issues we have with RDA.
    First when we opened a msg with SAP they asked to apply these notes:
    1048864 - RDA daemon does not close empty requests
    1042790 - P14: Real-time: QM action for real-time PSA request
    Which fixed most of issues and but the delta queue wasnt being deleted in source system even after the data is loaded and request closed. Now they asked us to apply other note 1089041 - RDA InfoPackage does not delete delta queue which is supposed to be part of SP16. And guess what we patched our system with SP16 and Now the RDA doesnt work at all :). The RDA is active but the daemon never wakes up - So opened anyother note with SAP. And pretty soon I hope I will be making good friends with the SAP consultant I'm working with all the messages going back and forth.
    Let us know if you found a magical way to make ur RDA work. I guess we decided to hold on RDA till starts behaving stable (may be SP53- you never know). And I would personally like to be able to close the request in 30mins and not 1hr default it has. I tried playing around with the FM's - no luck.

  • Tor daemon will not start up on boot...

    Here's the appropriate line from rc.conf, but it will not start unless I enter it manually from the command line. I'm not even sure where else to look or debug, as I've never had any troubles with daemons before this.
    DAEMONS=(syslog-ng cpufreq dhcdbd networkmanager tor polipo crond bluetooth cups hal fam alsa)
    And as a related but less important question, does anyone know where tor logs are located by default? I tried setting up a relay but could not verify that it worked because I don't know where the logs are kept.
    Last edited by fflarex (2008-03-03 03:42:23)

    I'm afraid I don't really know what you mean. Care to give an example?
    Anyways, I've found an error when I simply run 'tor' which could be the reason it does not start automatically. This error does not appear when I run 'sudo /etc/rc.d/tor start' (unless it is redirected to the log files instead, which I still haven't found). The error is:
    Mar 06 13:17:58.439 [warn] Error setting to configured GID: Operation not permitted
    Mar 06 13:17:58.439 [warn] Failed to parse/validate config: Problem with User or Group value. See logs for details.
    As far as I can tell, nothing should be wrong at all with the groups and it is all set according to the tor documentation. This is really starting to bother me...

  • I can not start secion in creative cloud from a macbook

    I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
    En español.
    No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
    we want a valid and positive response

    Hello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    Please let me know if you are successful or not.

Maybe you are looking for