ONS with EMC

Hi,
We are planning to use ONS with EMC in order for replicating disk storage asynchronously to a remote location. Estimated bandwidth requirement is 240Mbps and I think that this can be possible by using 2xOC3 link from our telco provider.
Is there a configuration of ONS which enables connection for disk storages over Gigabit lines and aggregated OC3 SONET/SDH links between two locations? I see some documents on CCO describing this but I am not able to find the details because I'm not familiar with the technology. Any help such as URL links for design and configuration options on CCO or just recommendations for doing this or answers including yes or no would be much appreciated.
Regards,
turkeer

Take a look at the CE-1000-4 Card. It appears to be tailor made for what you need.
You should find it in the ONS15454 doc lib.
Done right, there is not much to configure since the transport mechanisim is pretty blind to what you are putting on the fiber.

Similar Messages

  • I dont have any Add-ons with my FireFox. After upgrade to the latest version 26.0 I'm keep getting Script error "chrome://global/content/binding/popup.xml:580"

    Quite frequently I'm keep getting the error like "Script is not responding....I dont have any Add-ons with my FireFox. After upgrade to the latest version 26.0 I'm keep getting Script error "chrome://global/content/binding/popup.xml:580" Stop or Continue Script.
    Currently I don't have any Add-Ons installed in my FireFox, so I can suspect any Add-ons.
    I'm facing this issue only after the upgrade to 26.0 recently.

    Ifound this article:
    https://support.mozilla.org/pt-BR/questions/746499
    in this article the problem is similar not the same, but sdmitch16 had a intersting idea disable the chrome options
    and i search more in the internet i also found this:
    https://support.mozilla.org/pt-BR/questions/760704

  • How do i check the compatability of all my version 3 add-ons with version 4 before updating to vesin 4

    How do i check the compatability of all my version 3 add-ons with version 4 before updating to vesin 4

    Here's the link. It's a long list and unfortunately, it's not in alphabetical order. So it'll take some time to go through them:
    https://addons.mozilla.org/en-US/firefox/compatibility/report?from=%2Fzh-CN%2Ffirefox%2Fcompatibility%2Freport

  • Connecting SAP Solution Manager with EMC Documentum

    Hello Gurus,
    I'm aware that SAP can be connected with EMC Documentum.
    However I wanted to know, whether SAP Solution Manager can be connected with Documentum?
    If yes, please let me know the process or documentation (if any).
    Thanks
    Gautam

    I wanted to bump this thread as well. Has anyone done this, either successfully or tried and was unsuccessful?
    Thanks!
    Lori
    Edited by: Lori Sanders on Oct 12, 2011 3:04 PM

  • WAE- 674 with EMC SRDF Traffic Question ?

    Hi all,
    I have a WAAS demo at a customer.
    I have installed two WAE 674 boxes inline, at both ends of a 50mbps Metro Ethernet line between two EMC SANs. These EMC storages perform huge data replication during the day. All of the traffic  is EMC SRDF traffic, nothing else.
    Before putting the WAEs inline, the Metro line utilization had been around 49Mbps, ok so the WAN link was fully utilized.  WAE 674s installed and bandwidth usage has dropped %12 percent, something around 44 Mbps.
    EMC guys are telling me that, before WAAS, it used to take 7 hours to copy a 40GB data from one site to the other, with WAAS it came down to 1.5 hours. So yeah I know story is great so far.
    What I dont understand is the attached graphics taken from CM, WAE1 and WAE2. All I see is %20 reduction in original traffic. Shouldnt this value be much greater than that ? Otherwise what could be the reason of having much shorter replication times compared to before ?
    I have gone through couple of datasheets and marketing slides about WAEs and I have seen that with EMC replication traffic WAAS causes at least 2x optimization.
    Both WAEs have default configs, so I havent customized anything in the SRDF classifier on WAAS.
    I would really appreciate it, if some of you , can go through the screenshots that I attached and give me some thoughts and diretion to what value to customized and etc.
    Thanks in advance.
    Dumlu

    You will want to explore CSCsg30875 to see how it applies to your installation
    CSCsg30875 wccp blocking telnet to router
    Since 12.3T is EOL, it probably was not tested and may or may not exist in that Cisco IOS track.
    End-of-Sale and End-of-Life Announcement for Cisco IOS Software Release 12.3T
    http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps6947/ps5207/prod_bulletin0900aecd803a0ffe.html
    Thank You,
    Dan Laden

  • Integration with EMC Centera

    Hi,
    Has anyone used Content DB/Records DB with EMC Centera? Can't find much documentation about it anywhere but have found some notes about how to archive data off to Centera but nothing about getting it back. Specifically, if we query Centera with the C-Clip Content Address, how do we convert the Centera Binary Object back in to a form we can process? I suppose it will have to come back through Oracle Records DB? Is this information still recorded as folders in the Content Manager?
    Any help would be appreciated.
    Regards,
    Ian

    Hi Ian,
    if you configured your CDB/RDB to archive content to EMC Centera, then only the binary content object will move out of the database schema into Centera. All other metadata information and relationships like folder structure, name, creator, create date, etc, will remain in the database repository of CDB/RDB.
    It is absolutely transparent for any end user or custom code where the content is actually stored. The business logic of CDB/RDB knows how to get the content back to the client, no matter if it is stored as BLOB in the database, BFILE on a filesystem or as a binary object in Centera. Centera does not know what type of content it is nor any relationship to any origin folder. In this case Centera is just used as a dumb content store.
    Hope that helps.
    Frank

  • Cisco Twinax Cables Compatibiltiy with EMC VNX/VNXe

    Hi,
    I would like to know about Cisco Twinax Cables Compatibiltiy with EMC VNX/VNXe series storage - for connectivity between UCS Fabric Interconnect and EMC VNX/VNXe.
    Are the following Cisco Twinax Cables compatible with EMC's VNX and VNXe serie platforms:
    SFP-H10GB-CU1M= 1-m 10G SFP+ Twinax cable assembly, passive
    SFP-H10GB-CU3M= 3-m 10G SFP+ Twinax cable assembly, passive
    SFP-H10GB-CU5M= 5-m 10G SFP+ Twinax cable assembly, passive
    SFP-H10GB-ACU7M= 7-m 10G SFP+ Twinax cable assembly, active
    SFP-H10GB-ACU10M= 10-m 10G SFP+ Twinax cable assembly, active
    Kindly advice. Thanks.

    Hi,
    I'd like to confirm you, that passive assembly is supported. Haven't tried the actives one yet.
    I'm using UCS-B200 M3, and EMC VNX 5300.
    the EMC VNX5300 (Block Level) connected using 2 type of media. Copper (SFP-H10GB-CU5M= 5-m 10G SFP+ Twinax cable assembly, passive) and Fiber Channel 8 GB directly info Fabric Interconnect 6248 ports.
    For old server the connection is via iSCSI 10GB Copper. and for UCS-B200 M3 is via FC 8GB.
    All my configuration is running well.
    Hope thats helped.
    Thanks,
    Pieter

  • How can I re-download the previous version of Firefox. I have lost most of my add-ons with 4.0 including my password manager. This is a calamity and I've changed my default browser from Firefox. Help!!!

    The problem is very simple. As soon as I downloaded Firefox 4.0 I lost my add-ons. The add-ons were the reason I have been using Firefox for several years. This seems to be ludicrous. The new version should be able to manage integration of existing add-ons or the Firefox team should have provided the add-on authors with advance technical information before releasing 4.0 to the world.

    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • Can you buy add ons with an itunes gift card

    Can you buy add ons to a game on iphone5s with an itunes gift card ? Thank you

    If you mean in-app purchases, yes, in most cases a gift balance will work. Some apps do not accept gift balances, but I've not heard of a game where that is the case.
    Regards.

  • 10g R2 RAC on Solaris 10 with EMC Storage

    We are in the process of setting up 3/4 node RAC with the following components:
    Oracle 10g R2 RAC
    Oracle Clusterware / Sun Cluster / Veritas Cluster
    Sun Solaris 10
    EMC storage
    ASM/Cluster FS
    I would appreciate if some one can through some light on:
    * ) Veritas cluster / Sun Cluster is must component or Can I use Oracle clusterware ? what are the advantages and disadvantages of using Oracl clusterware compare with varitas cluster or sun cluster
    * ) Is cluster filesystem a compulsory component or Can I use ASM instead of Cluster File system.
    * ) If I don't use cluster filesystem where to put CRS repository and voting disk ?
    * ) What is best option for Oracle_Home, is it shared oracle home or sepereate oracle_home on each node ?
    * ) Are there any known risks invovled in using ASM. How is the I/O performance with ASM on EMC with Solaris ? Are there any best practices
    * ) Is GigE okay for interconnect or do I need to go for Infiniband ?
    * ) Is there any notes on Best practices for the above components
    *) Do I need to consider fail over option for NIC's (interconnect and public), if yes, how to do that ?
    *) Are there any other risks do I need to consider ?
    Thanks
    G

    Hi,
    I see lot of good input. I have done few RAC installs on sun/solaris/emc ...
    Here are few things to consider.
    * ) Veritas cluster / Sun Cluster is must component or Can I use Oracle clusterware ? what are the advantages and disadvantages of using Oracl clusterware compare with varitas cluster or sun cluster
    Just stay with Oracle Clusterware. If there are any issues then you only have to deal with one vendor and there will be no finger pointing. In any case Oracle Clusterware is needed even if you install Veritas/Sun.
    * ) Is cluster filesystem a compulsory component or Can I use ASM instead of Cluster File system.
    For the database you can use ASM. The only time I have considered a cluster filesystem is if external tables were in use.
    When you use ASM you need to partition the disk with 1 meg offset or start at cyclinder 1.
    * ) If I don't use cluster filesystem where to put CRS repository and voting disk ?
    OCR and Voting Disk go on raw devices.
    * ) What is best option for Oracle_Home, is it shared oracle home or sepereate oracle_home on each node ?
    Install ORACLE_HOME, ASM_HOME and CRS_HOME locally on each server.
    * ) Are there any known risks invovled in using ASM. How is the I/O performance with ASM on EMC with Solaris ? Are there any best practices
    http://www.oracle.com/technology/products/database/asm/pdf/asm-on-emc-5_3.pdf
    We have always installed 2 HBAs and used powerpath.
    * ) Is GigE okay for interconnect or do I need to go for Infiniband ?
    For a majority of cases gigE is sufficient.
    * ) Is there any notes on Best practices for the above components
    Have redundancy at each level.
    *) Do I need to consider fail over option for NIC's (interconnect and public), if yes, how to do that ?
    You can use IPMP. Use large send/receive buffers. Enable Jumbo Frames.
    We had to apply some patches.
    5128575 - RAC install of 10.2.0.2 does not update libknlopt.a on all nodes
    4769197 - WHILE ONE NODE OF RAC IS DOWN, CONNECTIONS FROM CLIENT HANG
    patch 5749953
    Thanks
    G

  • Flash player 11.8 successfully installed but is listed as disabled in the add-ons with no option to enable

    I cannot get flash player to work on my firefox browser. I installed the latest version of flash player on my mac several times, and it says it is installed successfully. If I look on my add-ons from the "Tools" menu, it says that Flashplayer is disabled, but with no button or option that I can see to enable it. If I try to watch a video on youtube, it says that flash is blocked for my protection. Flash is working fine on Safari and Chrome. Do you have any advice as to what I can do to get flash working on this browser? Thank you!

    I closed firefox and deleted pluginreg.dat, and then I opened firefox again and a new pluginreg.dat file appeared. The flash player still appears to be disabled when I look at my plugins though and if I go to a website that requires flash it still doesn't work.

  • Mpxio or Powerpath -- with EMC SANs?

    We have some new T3-1B's running on Solaris 10.
    We normally use PowerPath, but I'm trying to see if we can just use mpxio and be done. However, the issue I'm running into is the following.
    1. I dont have any way of determining which LUN is what -- in the CX500--I use the LUN Name to determine what the disk needs to be assigned to. I see only the WWN. With Oracle RAC, it's extremely important to make sure the disks are correct to each node.
    2. When adding new disks to the host, the new LUN does not appear on the host even after luxadm probe, and repeated devfsadm. Am I missing anything else? Any help would be appreciated.

    I'm not sure what kind of commentary you are looking for.
    We use Powerpath on Solaris 10 (x86 now, but in the past on T5120s) for multipathing to LUNs on EMC VNX and CX4 SANs. We followed the EMC Powerpath setup guide for Solaris 10 exactly.
    After disabling MPxIO, Powerpath was able to take control. Some older versions of powerpath had a bug where the pseudo names for LUNs would change causing some headaches.
    We keep a mapping of LUN to pseudo name to solaris dsk labels
    If you use ZFS I have found a 1:1 match between the zfs_max_vdev_pending value and the max queued-IOs value shown in Powerpath
    When we've had to fail/trespass LUNs over to other SPs on the EMC SANs, Powerpath has handled this elegantly with the expected warnings in /var/adm/messages
    I recall that we had to explicitly set the powerpath options for CLARiiON and VNX to managed and the policy to claropt
    When adding LUNs, to see all paths there is a routine to go through with cfgadm, devfsadm and the powerpath utilities. We use qlogic HBAs and the qlc leadville driver.

  • Help setting a repository with EMC Fiber storage

    Hello
    We have a couple of servers running OVM 3.2.2 to setup a test environment. The only common space are 6 LUNS on a EMC CX3-40. I can see the luns with multipath from the servers and available on /dev/mpath
    [root@dvmicovm1 bin]# multipath -ll |grep RAID
    EMC_ASM05 (3600601601f911900a4250377b5b8e211) dm-5 DGC,RAID 10
    EMC_ASM04 (3600601601f9119000ec7e110b9b8e211) dm-3 DGC,RAID 10
    EMC_ASM03 (3600601601f91190044870613b5b8e211) dm-4 DGC,RAID 10
    EMC_ASM02 (3600601601f91190080abeac9b4b8e211) dm-6 DGC,RAID 10
    EMC_ASM01 (3600601601f911900ba6e016bb4b8e211) dm-2 DGC,RAID 10
    EMC_OVMstorage (3600601601f9119004e22ab7ab3b8e211) dm-1 DGC,RAID 5
    I can't create the clustered pool because i can not see the storage at management level. I tried to create an ocfs2 filesystem, but I can't find a good link explaining the steps to do it with this version at command line. Help is welcome
    [root@dvmicovm1 mpath]# mkfs.ocfs2 -Tdatafiles -L EMC_repo -b 4K -C 4K -J size=64M -N16 /dev/mpath/EMC_OVMstoragep1
    mkfs.ocfs2 1.8.2
    Cluster stack: classic o2cb
    Overwriting existing ocfs2 partition.
    mkfs.ocfs2: Unable to access cluster service while initializing the cluster
    thanks
    Ileana

    Hi Ileana,
    what do you mean by "at management level"? The LUNs need to be presented to the VM servers only, but to each one simultaneously. They need to show up under /dev/mapper, which seems to be the case. However, there seem to be more LUNs visible than there should be… I reckon that the ASM0x LUNs are not supposed to be used by OVM, but seem to be LUNs for some Oracle DB(s), no? If that is the case, I'd suggest to hide them from the OVM servers in the first place.
    Then, you'd need at least two LUNs for OVM, one small one, depending on the cluster size, you should be able to get away with 32G max., and another one, that actually gets used as your shared storage repository. This one could be nearly as big , as you like.
    So, to be able to create a clustered pool, you'd need to have access to two distinct LUNs from each OVM server. You can check, if each OVM server, has access to the LUNs by choosing the server in OVMM and change the perspective on the right pane to "Physical disks".
    I'd also refrain from creating any ocsf2 fs on my own, while setting up the clusteres storage pool, since this will likely lead you into more trouble, since OVM won't overwrite an existing OCFS2 fs, if it finds one on any disk you throw at it and to get rid of the OCFS2 fs, you will like have to manually wipe the LUNs, which always means using dd, which is a program, that one always has to used with extreme caution, especially if there're LUNs available, which under no circumstances, are allowed to be deleted - see your ASM-LUNs…

  • Cannot perform ASM cloning with EMC BCV sync/split

    We have a ASM instance (RAC) on two notes (+ASM1 and +ASM2 respectively).
    We wanted to use EMC BCV sync/split to clone the source database. Here are the details
    Source
    ASM Instance = +ASM1(RAC)
    DB Instance = TESTASM (In diskgroup TESTASM_DG)
    10.2.0.3 versions both
    Target
    1) ASM Instance = +ASM2 (RAC)
    2) I first created a new diskgroup called TESTASM2_DG (note the 2 in the name) and mounted it.
    3) put source TESTASM db in hotbackup mode
    4) unix SA did the BCV sync split.
    What happenend then was the diskgroup name on the target became TESTASM_DG now (i guess this is because the diskgroup name is stored in the disk header). I was not able to mount it on target. It says ASM disk header corruption.
    So then i thought let me re do this and here are the changes
    Target
    1) Create TESTASM_DG diskgroup (same name as the source). - But create diskgroup failed with
    create diskgroup TESTASM_DG
    external redundancy DISK '/dev/rdsk/c12t1d4';
    ERROR at line 1:
    ORA-15018: diskgroup cannot be created
    ORA-15030: diskgroup name "TESTASM_DG" is in use by another diskgroup
    drop diskgroup TESTASM_DG
    ERROR at line 1:
    ORA-15039: diskgroup not dropped
    ORA-15001: diskgroup "TESTASM_DG" does not exist or is not mounted
    Questions
    1) Why is ASM2 saying TESTASM_DG is already in use ? Yes it is being used on the source node by ASM1. So does it mean that a RAC ASM cluster cannot have two same diskgroup names on each of the nodes in this cluster ?
    If there is this restriction, then how do we perform BCV sync/split. We use BCV sync/split as our database cloning option. There are other things like RMAN DUPLICATE etc, but that is not feasible for us because of time taken and other performance issues. BCV sync/split is very fast and we want to use it even after ASM
    Will most appreciate your help on this.

    It seems that cloning is not supported on the same host using BCV.Amit, I am not cloning in the same host. I want to clone it on target host NODE 2. But the diskgroup is not getting mounted on NODE 2 becuz of the name clash. If i use different name, then ASM Disk header corruption is coming. So this is where i am struck. RMAN Duplicate is not an option for us because of network related performance problems. We were doing BCV sync/split prior to ASM and we want to continue with that route after ASM.
    I will update you folks after working Oracle support and EMC on this.
    -Srinivas

  • I am having trouble with incompatible add-ons with Firefox 5 and I don't want 5 now because of it

    I got a thing to upgrade Firefox and now my toolbars don't work and I don't want the new Firefox now because of it. How do I go back to previous version?

    For those that really need an earlier version of Firefox
    * ftp://ftp.mozilla.org/pub/firefox/releases/
    :or with the latest of version 3
    * http://www.mozilla.com/firefox/all-older.html
    '''Keep your extensions up to date''', don't wait for a Firefox update and then try to do everything after the Firefox update.
    '''Research your''' extensions, some may have updates, some may be found in the developer comments or user comments on the add-on, or on the "'''View all versions'''" link which is part of the Release notes at the bottom of the add-on page.
    [https://addons.mozilla.org/firefox/addon/is-it-compatible/ '''Is It Compatible?''' :: Add-ons for Firefox], Are your add-ons compatible with the next version of Firefox? Find out straight from the Add-ons window!
    You can force 5.0 "compatibility" with the "[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Compatibility Reporter]" extension, or with [http://kb.mozillazine.org/Extensions.checkCompatibility extensions.checkCompatibility] using about:addons.

Maybe you are looking for