Onscreen touch buttons problem

i am using COMPAQ PRESARIO V6000.
onscreen touch buttons are not working anymore, volume decreases itself and then can't be increased...as if increased manually.....same time decreased itself.
reallly confusing and mess...plz help

Hi,
Shutdown the notebook, unplug the AC Adapter, remove the battery, and then hold down the Power button for a full minute.  Re-insert the battery, plug in the AC Adapter and start the notebook to see if this has helped.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Nokia 5233 Touch button Problems

    I just bought the new Nokia 5233 phone.
    Whenever the phone is locked and I set a alarm. There is no way i can stop the alaram other than to reset the alarm manually by  alarms-> edit.
    There will be two touch buttons that apper on the otuch screen. One to stop and other to snooze the alarm. Even If press them, it wont work. The alaram keeps ringing. I even tried clicking on the green button and the menu botton at the bottom. Still no use. I cant even unlock the phone. Only thing i can do is press the red button at the end, which will snooze the alarm. After this, I have to manually change the alarm time.
    The same thing happens even with phone calls. I cannot use the touch button that apper on the touch screen. I have to use the green and red button at the bottom.
    These problem come into picture only if the phone is locked. Otherwise it works fine.
    What can I do to solve this??
    Expecting a quick reply.

    Hi there,
    you right abt getting two option of stop and snooze, try sliding your finger along the arrow rather than presssing the botton...you can pres the red button to put in to snooze also.
    I believe you will same issue when you recieve your call while your phone is locked, you get "unlock" and "answer" option, out here too slide you finger along the arrow.
    i hope this will help you. 

  • Ipod touch button problem

    the home buton on my ipod togh5 has stopped working even when its not 6 months since i bought it.
    can it be repaired and how to contact apple regarding this?

    How do I obtain service for my iPod?
    The iPod support site has troubleshooting articles to help you solve your iPod issue. If you have reviewed those articles and still need service for your iPod, you can contact Apple. You can also take your iPod to your local Apple Authorized Service Provider. Note: There may be a fee for diagnostic service.
    There is no direct link. The above is from
    Apple - Support - iPod - Service FAQ

  • What's wrong with my iPod Touch? (Touches buttons by it's self)

    A friend gave me this iPod touch 3g with a minor crack in the screen (nothing major). Everything was fine and dandy until I downloaded two apps (Mangastorm and mangabox). Now, my iPod touches buttons by itself. For example I'd hover my hand over a button and it'll hit the key next to what I intended on pressing and so many other random buttons. Please help me on how to fix this issue?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings (if you can)     
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Nokia 701 touch sensitive problem

    I have with me 701 with the latest firmware version, i often have touch sensitive problem. Sometimes it get ok by just switch off the phone and sometime by removing battery (becoz then button too don't work).
    what should i do?
    Someone Plz help !

    Hi salih_367,
    Thank you for your post and welcome to the forums!
    We're sorry to hear about your problem. It seems that your Nokia 701 headphone plug has a connectivity problem. As the problem is likely caused by the phone hardware, it is something you cannot fix yourself without voiding the warranty.  What you can do however, is to check if the socket may have gotten some dirt or fluff in and try clean it. 
    If the problem persists, we would advise you to visit your nearest Nokia Care Point and let them have a look. 
    Let us know how you get on,
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Nokia lumia 610 power button problem

    Hi,
    It has been more than a year since i have been using my nokia lumia 610 but from few days i have been experiencing a problem with my phone . sometimes power button becomes too sensitive and it becomes like a touch button , Also , it turns off by itself And while starting , it reaches upto nokia logo and then vibrate and turns off.
    now phone working fine, "this problem started when my phone fall down like 50 cm high to ground".
    Please help me, Thank you in advance.

    Hi wiise9,
    Welcome to the forum! 
    We can't verify yet if the issue is hardware or software related unless confirmed by Nokia authorized technicians. Just keep monitoring the phone's performance. If the issue happens again, best to try the troubleshooting steps shown at this link first further isolate it: Your Windows Phone 8 doesn't work or respond as expected 
    Let us know if you need further assistance. 

  • Touch buttons not working correctly

    my next/fast forward and previous/rewind touch buttons on my 15gb ipod aren't working right. instead of skipping to the next song or back to the song before, both buttons just start the song over again. I cannot get to another song. i have re-set and nothing. does anyone know what to do? i have had this ipod for 2.5 years now. help.

    Hello,
    I have HP Pavilion dv5 and I have similar problem. Here is the information that may be helpful for you.
    Click combination of buttons on your keyboard Windows+R -> Type MSCONFIG -> OK -> Continue -> Go to Startup Tab in the System Configuration -> Uncheck “HP Quicktouch On Screen Display Item” -> Restart Your computer.
    This method does not solve the volume problem, but it disables the on screen display of the volume control. You’ll can work but there is no annoying bar.
    Kind regards,
    Valentine
    P.S. I hope HP will release a patch for solving of this issue...

  • How to disable Satellite P750's touch buttons?

    I constantly have a problem with my computer that it turns up the volume by itself because it thinks I'm tapping on the increase volume touch button.
    Anyway, it's really annoying, so can I disable the touch sensors so it will stop doing it?

    Hi leavercleaver
    If you use original preinstalled Win7 check please if you can find this option in Toshiba Assist > Optimize > Toshiba Hardware setup > Button setting > Function button.
    As far as I know Toshiba hardware setup utility control BIOS option so what you can also do is to enter BIOS settings, check if such option is available there and disable it there directly.

  • SPA50X transfer with one-touch button

    Hi to All!
    Sorry for my English first! :-)
    I'm using SPA504G phones with IP-PBX ZyXEL X8004. One-touch buttons is configured as described in manuals: fnc=sd+cp+blf; sub=UserID@$PROXY
    Here is my problem: when I want to transfer incoming call to other extension by pressing desired One-touch button, it executes a BLIND transfer, not attended transfer. There's two interesting fields on SIP tab of the web interfacenamed 'Hold Target Before REFER' and 'Keep Referee When REFER Failed', but changing of values of them does not changing result.
    Please explain meaning of these fields to me, how it works and what should I do to retrieve ATTENDED TRANSFER by pressing One-touch button.
    Thanks a lot!
    Ruslan

    Hi Ruslan,
    For me to answer this question I would need to set up one in our lab and see if that works.  For that, I would suggest you to give us a call at 1-866-606-1866 at any time so we can create a case and assist you further.
    Meanwhile, you can try to turn off the Blind transfer (Phone-->Supplimenting Services) and that should allow the attendent transfer.  Then, add xferlx to the ringing key list.  So, while the call is either ringing or is connected, press the *xferLx line key. If only one other call is on hold, the active call is connected to the call on hold. Otherwise, the user is prompted to select the Line key to transfer the call to.
    Hope that helps.
    Sincerely,
    Alena Patterson
    Cisco Small Business Engineer
    CCNA

  • Sony Ericsson Vivaz touch screen problem

    I have a sony ericsson vivaz bought on nov 2010. It was working perfectly fine till last two months...... I startd noticing touch screen problem on top left part.. while typing messages in querty mode, i cant select caps ON button.. instead it displays"Z" on the screen. I tried to calibrate. but i could not start it as my top left part is not sensing any input..  what shal i do??
    how much wil it cost to repair it??
    Im frm India.

    try
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Has anyone experienced the on/off touch button and the brightness touch buttons failing on a 30" cinema screen?

    I have a 30" cinema display which is about 3 years old. Everything was working fine yesterday but on reboot today the screen went dim and the brightness buttons did not work. I used the key board and increased the brightness but it went dim again  on release. The on/off touch button also did not work.
    I have set to disable both of these in the preferences and all is working now but I wondered if anyone else has experience of both of these touch buttons failing. The monitor has been switched off when booting up on a morning but I had not switched it off manually before shut down or set it to do so which I thought was odd. Now I wonder if it was the first signs of a breakdown of the switches on the monitor.
    Thanks for any imput in advance.
    sas44

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Satellite A300-14s feather touch button not working

    Hi,
    I installed VMWare player on my satellite A300-14s running in Windows Vista 32-bit. But after installation, my feather touch buttons ( esp. the Illumination and CD/DVD buttons) stopped working.
    Then I uninstalled it, but still the problem persist.
    I don't have any system restore point before the installation.
    What do i do?
    Thank You.

    Flash Cards Support Utility is not a part of Value Added Package! It has to be installed separately!
    But dont mix it with flash card reader driver. Thats the driver for the card reader (SD, SDHC cards, etc.). You have to search on the Toshiba website for Flash Cards Support Utility.
    Check this!!!

  • Satellite A660 - Touch buttons no longer work

    Hey,
    I have had a satellite A660 for a few months now, and recently, some of the touch buttons have stopped working, these include the eco utilities, wireless, programmable shortcut, play/pause, lighting and touch pad on/off button.
    This makes it very hard to use the laptop as I can no longer use the touch pad as it wont turn back on. I can only use the laptop when I have a mouse connected.
    How can I reassign these buttons to their roles?
    Thanks in advance.
    Seraj.
    PS. I've tried installing the value added package with no result.

    it is. they dont work together.you can uninstall the driver for the buttons.
    or alternatively
    Toshiba Button Support uses the Windows function "MobilePC" - > " Hotstart". Hotstart only works, when the autostarting function was not deactivated (the value of registry key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Pol icies\Explorer\NoDriveTypeAutoRun is set to 0xFF).you can change this to something esle. VMware set's this value per default to deactivate the CD/DVD Autorun feature. Switch on the autorun, reboot the Qosmio and Hotstart (and also the Toshiba Button Support) works fine. That's the whole problem.

  • HP Pavilion dv7 2230ev , quick launch touch buttons stopped working

    Hi, i own a HP Pavilion dv7 2230ev  for th past month and one day the quick launch touch buttons stopped working(sound volume,wifi,music player). i used them for a month with no problem and suddently -no fall or software change- they stopped working, i even did the HP recovery to factory settings from the backup partition and still no change.99% its a hardware fail but i want to avoid giving it to hp service center,i was told they had a 20day wait,just to look at it...any ideas?

    Hi,
    You're welcome and I'm glad it helped
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Touch buttons stopped working

    Hi, I have a HP dv7-3085dx notebook, and the touch buttons above the keyboard stopped working.
    It just happened, the entire touch surface doesn't work. And even stranger, the sound and wireless buttons on the sides doesn't even have the led on. They are completely off, not allowing me to turn on the wireless card. Is there any other way to turn it on?
    Thanks!

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

Maybe you are looking for