Onsite Scanner Unable To Send Documents Through Exchange 2007 Server (SBS 2008)

I have an SBS 2008 server complete with Exchange 2007 in house and have configured Exchange 2007 to use the Exchange Online Protection (EOP) to process mail for malware, etc.  This setup has worked great for the last year or so with no issues.
However, all of a sudden in the last couple of weeks our onsite copier can no longer send documents through email to anyone within the organization.  The copier is a Kyocera TaskAlfa 3050CI and exists with the same network.  The copier can scan
to a network folder without issue.
If I change the SMTP settings to use a gmail account instead of a local account I can send mail to outside email address.  Even with this changed though I still can't send to our domain addresses.
I tried running a message trace from the Exchange Management Console but it doesn't find anything for hte given subject or date/time when I scanned the document.  
I am not exactly sure what I should be checking or what piece of the puzzle is causing the problem here.  Any ideas on what might be happening or how to correct it?
Thanks so much!

Hi,
Any update? Would you please let us confirm some questions as Howtodo mentioned. Please feel free to let us
know.
Based on your description, it seems that only the copier can’t send documents via emails. On your SBS 2008
environment, please check if some user accounts encounter the similar issue. In other words, did users also can’t send emails attached with documents? If the email was attached with a small size document, will the same result?
In addition, can find any relevant error or events?
Hope this helps.
Best regards,
Justin Gu

Similar Messages

  • Removing Exchange 2007 from SBS 2008 (In an Exchange 2010 Coexistance Scenario) - In order to remove 2007 Mailbox Objects from Active Directory and remove the SBS2008 server completely

    I'm trying to remove Exchange 2007 from an SBS 2008 server
    (Server 2008 Standard FE).  My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
    We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
    I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers.  We have two full blown DC's in the environment.
    I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server.  I can NOT seem to find a TechNet article that shows me how
    to proceed in this kind of scenario.  I am trying to use the TechNet article:
    http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
    This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard. 
    When I go to Disable Mailboxes I get the following error:
    Microsoft Exchange Error
    Action 'Disable' could not be performed on object 'Username (edited)'.
    Username (edited)
    Failed
    Error:
    Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
    OK
    I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010.  I just want
    to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
    Can someone point me in the right direction?
    Thanks!

    Hi,
    Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
    2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
    On current situation, please refer to following articles and check if can help you.
    Transition
    from Small Business Server to Standard Windows Server
    Removing SBS 2008 –
    Step 1: Exchange 2007
    Removing SBS 2008 – Step 2:
    ADCS
    Removing
    SBS 2008 – Step 3: remove from domain / DCPROMO
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    Hope this helps.
    Best regards,
    Justin Gu

  • Unrecognized certificate when Outlook 2010 tries to connect to Exchange 2007 on SBS 2008

    Hi all,
    I believe this is a security issue rather than a connectivity or configuration problem.
    Running Outlook 2010 on Windows 7 trying to connect to Exchange 2007 on SBS 2008, I receive the following error:
    "The name of the security certificate is invalid or does not match the name of the site"
    When I view the certificate I see that it was issued to "zx-server" by "zx". This is NOT my domain CA nor is it a certificate I recognize. I use a self-issued certificate (i.e. issued by the SBS box). I also receive this certificate error when I browse to
    the internal website (companyweb). No other computers on the network are seeing this behaviour.
    I have checked the certificate stores in certmgr and I can't find any such certificate or CA. I have also searched the entire hard drive with no luck. I have run Kaspersky AV, Malwarebytes and MS Security Essentials several times but I can't find any malware.
    I also recently installed Comodo Firewall (the problem began after this).
    I need to find and remove the certificate and prevent it from being presented to me every time I try to connect to the server. All help, advice and suggestions appreciated.
    Aide

    Hi,
    It’s really a common issue.
    This issue occurs if the following conditions are true:
    You replace the default self-signed Exchange Server 2007 or Exchange Server 2010 certificate with a different certificate.
    Note The Setup program in Exchange Server 2007 or in Exchange Server 2010 creates a default self-signed certificate when Exchange Server 2007 or Exchange Server 2010 is installed.
    The common name on the replacement certificate does not match the fully qualified domain name (FQDN) of the URL that is stored in the following objects:
    o   
    The Service Connection Point object for the Autodiscover service
    o   
    The
    InternalUrl attribute of Exchange 2007 Web Service (EWS)
    o   
    The
    InternalUrl attribute of the Offline Address Book Web service
    o   
    The
    InternalUrl attribute of the Exchange unified messaging (UM) Web service
    By default, the URL that is stored in these objects references the NetBIOS name of the server. For example, a URL that resembles the
    following URL is stored:
    https://NetBIOS_name.contoso.com/autodiscover/autodiscover.xml
    This may differ from the host name that is used in the FQDN of the replacement certificate. For example, the replacement certificate
    may have an FQDN that resembles the following FQDN:
    mail.contoso.com
    This issue causes a name mismatch error to occur. Therefore, you receive the security warning message when you try to connect Outlook
    2007 to the mailbox.
    For more detailed information about the procedures to fix the issue, please refer to the following KB article:
    Title: Security warning when you start Outlook 2007 and then connect to a mailbox
    that is hosted on a server that is running Exchange Server 2007 or Exchange Server 2010: "The name of the security certificate is invalid or does not match the name of the site"
    URL:
    http://support.microsoft.com/kb/940726
    Regards,
    James
    James Xiong
    TechNet Community Support

  • Removing Exchange 2007 from SBS 2008 after Migrating to Office 365 Mid Sized with DirSync and SSO

    We have recently completed off a Migration of Exchange 2007 to Office 365 Mid Sized platform.
    I now need to decomission the old SBS 2008 server as they have moved to a Windows Server 2012 R2 server setup for DC, File and print and application servers.
    I need to know what are the ramifications of removing the Exchange 2007 server from the SBS 2008 server and will this remove the LegacyDN details from AD and cause any issues with internal emails between users using Outlook linked through to Office365.
    I understand that after removing Exchange 2007 there will be no friendly GUI to update and maintain proxyAddress, targetAddress and LegacyDN addresses, I am comfortable doing this in ADSI edit or with a script.
    Will this remove the x500 addresses relating to the on premise Exchange Orgainisation and just leave behind the x500 addresses for Exchange Labs which I assume is the x500 addresses for the Azure AD intergration for Office365.

    Hi ,
    Thank you for posting your issue in the forum.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support.
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • IIS SMTP instead of Exchange 2007 on SBS 2008

    We have recently moved a client from Exchange 2007 on a 2008 Small Business Server over to Office 365. We would like to disable Exchange 2007 altogether in order to free up resources on an already overworked server. However, we have a couple of multifunction
    devices that require an unauthenticated SMTP relay for email. I believe the easiest solution available to us is to enable SMTP in IIS and limit the relay to certain internal IPs. Assuming Exchange is fully disabled, would this be a viable solution? Given that
    we are still running IIS internally, I would see this as a net gain in terms of system resources.

    It is not possible.

  • Problem connecting to MS Exchange 2007 on SBS 2008

    I am having problems connecting to Exchange via cfexchangeconnection. Our ColdFusion environment is CF9 Enterprise on Win 2008, and the Exchange host is Win SBS 2008 (which uses IIS7).
    After having worked through the documentation and following all procedures outlined at
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec14f31 -7fed.html
    plus googling intensively, we have the following method to test the connection
    <cfexchangeconnection action="open"
             connection="thisExchangeConnection"
             server="portal.mydomain.com"
             protocol="https"       
             formBasedAuthentication="true"
             formBasedAuthenticationURL="https://portal.mydomain.com/owa/auth/owaauth.dll"
             mailboxname="myMailBox"       
             username="myUsername"
             password="myPassword" />
    <cfdump var="#thisExchangeConnection#">
    <cfexchangeconnection action="close"
             connection="thisExchangeConnection" />
    The IIS7 implementation in SBS 2008 is quite a lot different to Win 2008, so there are some question marks around some steps in the above documentation. However, we have made sure that:-
    1) you can use the credentials above to login via a web browser
    2) WebDav is on in IIS
    3) there is no IWA and forms based authentication is on
    4) certificates are installed correctly on both the CF and Exchange servers
    5) the myUsernameaccount has correct permissions in iis/owa/exchange
    Despite this, the net result is always
    Access to the Exchange server denied. 
    Ensure that the user name and password are correct.
    From research it seems that a lot of people have issues where the underlying problem is actually an Exchange 440 timeout error where the password in the IUSR_<servername> and IWAM_<servername> (IIS/Active Directory) is out of sync.
    I was pinning my hopes on the above being the problem but now I find that in SBS 2008 there is no IWAM_<servername> server account.
    All this leads me to ask is SBS 2008 actually compatible with the cfexchange tags in CF9? There is nothing in the documentation that I can find that syays that it isn't, but given the amount of time we've spent on what should be straightforward I am wondering if we are on a hiding to nothing. Anyone from Adobe care to comment?
    If anyone has managed to get this to work specifically with SBS 2008, or has any advice I'd be grateful to here from you.

    Hi,
    As said by Sneff , I would also recommend to enable Logging to get more detailed information. Also follow
    Configuration of POP/IMAP on SBS 2008 Refer to :
    http://blogs.technet.com/b/sbs/archive/2008/09/19/how-to-configure-sbs-2008-to-host-pop3-imap4.aspx
    http://blogs.technet.com/b/sbs/archive/2011/08/31/how-to-configure-outlook-for-pop3-imap-and-smtp-connectivity-in-sbs-2008-2011-standard.aspx
    As per the error code, you need to follow
    http://support.microsoft.com/kb/813514/EN-US
    I would also disable AV on both Client machine and TEST , including the Filters of AV.
    Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Outlook 2010 Will Not Connect to Exchange 2007 on SBS 2008 Server

    Good Morning,
    I have a user who cannot connect to the exchange server on SBS 2008 with outlook 2010.  When they start outlook, it shows disconnected and will not connect for a minimum of 20 minutes to an hour.  Any suggestions on how to fix this would be appreciated. 
    I have rebuilt their profile, but that does not fix the issue.
    Thank you,
    Lee F.
    Lee Feldman SMB Consultant

    Hi,
    Thanks for posting in the forum.
    Regarding the current issue, since you have recreated the user profile without any issue, I suspect that it’s mainly caused by the network issue. At this time, please first check the TCP/IP
    configurations as Larry mentioned. Then, please also refer to the article below for details about how to troubleshoot Outlook connectivity issue.
    Troubleshooting Microsoft Exchange: Outlook Connectivity Issues
    http://blogs.technet.com/b/mspfe/archive/2011/04/12/troubleshooting_2d00_microsoft_2d00_exchange_2d00_outlook_2d00_connectivity_2d00_issues.aspx
    Hope this helps.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Andy Qi
    TechNet Community Support

  • Unable to change document through FI_DOCUMENT_CHANGE for second item line

    Hi All,
             I am unable to change document through FM FI_DOCUMENT_CHANGE for second line item (buzei 002).
             I want to change assignment field(ZUNOR) for second item line.( Please be noted that bseg-koart for this document is maintained as 'S' (G/L account).
             Please give some inputs on the same,it will be grate for me.
    Rgds,
    Raghav

    First some tests, try to change the value with transacions FB02 or FB09, if you cannot that may come from the Field Status Group associated with the account and posting keys.
    - FS03 to find Field Status Group of the account
    - SPRO then Financial Accounting, General Ledger Accounting, Business Transactions, Carry Out and Check Document Settings, Maintain Field Status Variants to find Field Status Group definition  (or SM34 on view cluster V_T004V)
    Regards,
    Raymond

  • I am unable to send videos through messaging since the 7.0.2 upgrade, I have a iPhone 4 iPhone 4, iOS 7.0.2

    I am unable to send videos through messaging since the 7.0.2 upgrade, I have a iPhone 4
    iPhone 4, iOS 7.0.2

    Does you carrier support MMS?

  • Unable to send email through sky

    Hi, unable to send emails through sky as it says the password is incorrect on the settings page

    Hello David.ball,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    Have a nice day,
    Mario

  • Unable to send message through iMessage

    Unable to send message through iMessage.
    Retry fails over and over again.
    But able to receive from it.
    Tried resetting network settings then it works again until the problem comes back.
    Not sure what causes the problem. I do not wish to reboot my iphone everytime when it happens.
    Seems like ios7 gm issues.
    Never had this problem on the beta.
    Anyone have any resolution to this?

    iMessage is Activated.
    Facetime is Activated.
    Don't know what is preventing me from sending over iMessage.
    Receiving is no problem. Even during the the time I was trying to send.

  • Unable to send photo through email using iphoto theme (designs)

    Unable to send photo through email using iPhoto theme (designs) using the SHARE button.
    Error message:
    Your email did not go through because the server did not reply.
    Check your Internet connection.
    If the connection is working properly, the email server may be down.
    Try sending your email again later.

    Your email did not go through because the server did not reply.
    Check your Internet connection.
    If the connection is working properly, the email server may be down.
    Try sending your email again later.
    Are you using Yosemite and not apple's Mail app? Then you may need to set up an app-specific password: See the post below:
    Re: I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!in response to Gary Kissler
    This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
    I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
    https://appleid.apple.com
    Click "Manage Your Apple ID"
    Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
    Click Password and Security in the left column
    Click Generate an app-specific password
    Enter iPhoto as the name of the app
    Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
    And...voila' (I hope)

  • Cannot send email from Exchange 2007 to Exchange 2013

    Hello Anyone,
    Anyone can help? I've prepare MS Exchange 2013 already, for Migration MS Exchange 2007 and I got the issue.
    My issue is I can't send email from Exchange 2007 to Exchagen 2013, but for Exchange 2013 can send email to Exchange 2007,
    is my issue only internal email for external email both Exchange server is working fine.
    Regards,
    Eakkasak

    Thanks for your reply, when I send email from Exchange 2007 to Exchange 2013 I'm get the error message below.
    Delivery is delayed to these recipients or distribution lists:
    Eakkasak Buajan
    Subject:
    This message has not yet been delivered. Microsoft Exchange will continue to try delivering the message on your behalf.
    Delivery of this message will be attempted until 8/29/2014 8:30:29 PM (GMT+07:00) Bangkok, Hanoi, Jakarta. Microsoft Exchange will notify you if the message can't be delivered by that time."
    I'm already tick  "Exchange server Authentication" in the Default Receive connector properties of Exchange 2013"
    I'm restart services and restart all Exchange Server but doesn't work.
    Thanks,
    Eakkasak
    Sent by Microsoft Exchange Server 2007

  • Unable to access Workspace through Apache web server

    Hi,
    I have configured Hyperion 9.3.1. products in windows.
    I am getting the following error message when trying to access Workspace through Apache web server(port 19000). But, able to access through Weblogic Application server(port 45000).
    please assist me in resolving this issue.
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    More information about this error may be available in the server error log.
    Apache/2.0.63 (Win32) mod_jk/1.2.8 Server at nasbydapp04 Port 19000
    Thanks,
    Siva

    I re-configured the BIPlus components and even now, i am unable to access workspace through Apache web server.
    But now, i am getting a different error
    Error:
    HTTP 404 - File not found
    Internet Explorer
    Can anyone help me in resolving this issue.
    I have updated httpd.conf and HYSL-Weblogic.conf file in Apache server.

  • Urgent!!!! Problem in sending mail through yahoo mail server

    Hi
    I have a yahoo account and I want to send email through yahoo mail server
    using my java program. My program supports SMTP server authentication.
    But when I connect to the yahoo mail server(smtp.mail.yahoo.com) I got this error
    javax.mail.MessagingException: 521 yahoo.com closing transmission channel. You
    must be pop-authenticated before you can use this smtp server, and you must use
    your yahoo mail address for the Sender/From field.
    This is my program
    import javax.mail.*;
    import java.util.*;
    import javax.mail.internet.*;
    import javax.mail.event.*;
    import java.io.*;
    public class JavaMailUserAgent
         Properties properties;
         Session session;
         Message message;
         JavaMailUserAgent(String mailHost,String smtpUsername,String smtpPassword) throws Exception
              properties=new Properties();
              properties.put("mail.smtp.host",mailHost);
              ServerAuthenticate auth=new ServerAuthenticate(smtpUsername,smtpPassword);
              session=Session.getInstance(properties,auth);
              message=new MimeMessage(session);
         } //**********************************************************************end constructor
         void sendMail(String messageFrom,String messageTo,String subject,String messageBody) throws Exception
              properties.put("mail.from",messageFrom);
              InternetAddress[] address={ new InternetAddress(messageTo) };
              message.setFrom(new InternetAddress(messageFrom));
              message.setRecipients(Message.RecipientType.TO,address);
              message.setSubject(subject);
              message.setContent(messageBody,"text/plain");
              Transport transport=session.getTransport(address[0]);
              transport.addConnectionListener(new ConnectionHandler());
              transport.addTransportListener(new TransportHandler());
              transport.connect();
              transport.sendMessage(message,address);
         } //*************************************************************************end function
    } //*************************************************************************************end main
    class ConnectionHandler extends ConnectionAdapter
         public void opened(ConnectionEvent e)
              System.out.println("connection opened");
         public void disconnected(ConnectionEvent e)
              System.out.println("connection disconnected");
         public void closed(ConnectionEvent e)
              System.out.println("connection closed");
    } //*************************************************************************************end main
    class TransportHandler extends TransportAdapter
         public void messageDelivered(TransportAdapter e)
              System.out.println("message delivered");
         public void messageNotDelivered(TransportAdapter e)
              System.out.println("message NOT delivered");
         public void messagePartiallyDelivered(TransportAdapter e)
              System.out.println("message partially delivered");
    } //*************************************************************************************end main
    class ServerAuthenticate extends Authenticator
         String smtpUsername = null;
         String smtpPassword = null;
         public ServerAuthenticate(String username, String password)
              smtpUsername = username;
              smtpPassword = password;
         protected PasswordAuthentication getPasswordAuthentication()
              return new PasswordAuthentication(smtpUsername,smtpPassword);
    } //*************************************************************************************end main
    I use this code to call the program.
    JavaMailUserAgent jmail=new JavaMailUserAgent("smtp.mail.yahoo.com","my_yahoo_username","my_yahoo_password");
    jmail.sendMail("[email protected]","[email protected]","test subject","test message");
    Could you pls tell me why do I get this error eventhough My program has server authentication.
    Is this my program error.Please Helpl me what to do to correct this problem.
    Please include a sample code
    thanks for listening
    sabu

    I have used the code below to send mail from yahoo account,but I got the error message like below,what I should configure in pop3 of yahoo account????
    import javax.mail.*;
    import java.util.*;
    import javax.mail.internet.*;
    import javax.mail.event.*;
    import java.io.*;
    public class JavaMailUserAgent
    Properties properties;
    Session session;
    Message message;
    JavaMailUserAgent(String mailHost,String smtpUsername,String smtpPassword) throws Exception
    properties=new Properties();
    properties.put("mail.smtp.host",mailHost);
    ServerAuthenticate auth=new ServerAuthenticate(smtpUsername,smtpPassword);
    session=Session.getInstance(properties,auth);
    message=new MimeMessage(session);
    //**********************************************************************end constructor
    void sendMail(String messageFrom,String messageTo,String subject,String messageBody) throws Exception
    properties.put("mail.from",messageFrom);
    InternetAddress[] address={ new InternetAddress(messageTo) };
    message.setFrom(new InternetAddress(messageFrom));
    message.setRecipients(Message.RecipientType.TO,address);
    message.setSubject(subject);
    message.setContent(messageBody,"text/plain");
    Transport transport=session.getTransport(address[0]);
    transport.addConnectionListener(new ConnectionHandler());
    transport.addTransportListener(new TransportHandler());
    transport.connect();
    transport.sendMessage(message,address);
    } //*************************************************************************end function
    } //*************************************************************************************end main
    class ConnectionHandler extends ConnectionAdapter
    public void opened(ConnectionEvent e)
    System.out.println("connection opened");
    public void disconnected(ConnectionEvent e)
    System.out.println("connection disconnected");
    public void closed(ConnectionEvent e)
    System.out.println("connection closed");
    } //*************************************************************************************end main
    class TransportHandler extends TransportAdapter
    public void messageDelivered(TransportAdapter e)
    System.out.println("message delivered");
    public void messageNotDelivered(TransportAdapter e)
    System.out.println("message NOT delivered");
    public void messagePartiallyDelivered(TransportAdapter e)
    System.out.println("message partially delivered");
    } //*************************************************************************************end main
    class ServerAuthenticate extends Authenticator
    String smtpUsername = null;
    String smtpPassword = null;
    public ServerAuthenticate(String username, String password)
    smtpUsername = username;
    smtpPassword = password;
    protected PasswordAuthentication getPasswordAuthentication()
    return new PasswordAuthentication(smtpUsername,smtpPassword);
    public static void main(String str[])throws Exception
    JavaMailUserAgent jmail=new
    JavaMailUserAgent("smtp.mail.yahoo.com","[email protected]","passwordd");
    jmail.sendMail("[email protected]","[email protected]","test subject","test message");
    ERROR:
    E:\mail\javamail\servlet>java ServerAuthenticate
    connection opened
    Exception in thread "main" javax.mail.MessagingException: 530 authentication req
    uired - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
    at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:879)
    at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:599)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(Compiled Code)
    at JavaMailUserAgent.sendMail(JavaMailUserAgent.java:58)
    at ServerAuthenticate.main(JavaMailUserAgent.java:131)
    How Could I rectyfy the above error ?????
    Regards,
    Mahesh.

Maybe you are looking for