ONT beeping, is there a workaround?

I've read all I could find on replacing the battery, however if the idea of the backup battery is so that I can still make calls after a power outage for up to 8 +/- hours... I don't need it. I have a cell phone which is always charging at home & will last more than 8 hours. I honestly can't afford the $17 battery right now and the button to silence the alarm does absolutely nothing. This thing is making me lose sleep! I appreciate it's intent, but don't I have a choice? Also, the tech who drilled a hole right next to my bed through my brick to install this box never mentioned what it was let alone that I needed to replace the battery. I don't care where it's written I've been a Verizon phone customer for over 38 yrs and never had the need to read through all the printed material until this noise next to my head started beeping. Is there any way to stop the darn thing until I can order this battery?
http://www.ebay.com/itm/200887915122

You need to replace the battery on that BBU or get a new BBU installed that has updated firmware so that it won't beep.

Similar Messages

  • In Pages 5.5.1 when I go to the Open menu I cannot get a preview of any of the files in the list using the spacebar, which I can do in every other application and finder. Is there a workaround?

    In all other applications and in the finder, if I select a document and press the spacebar I get a quickview preview of that file. It does not work in Pages when I choose Open and am given a list of files to select from. This was not the case in older versions of Pages. Is there a workaround, other than doing quickview in the Finder before going to Pages.

    On Yosemite, Pages documents that are in a package (folder) format are viewable with Quick Look in the Pages v5.5.1 file chooser. Pages documents that are in the Single File (compressed, renamed folder) format are viewable in diminished size with Quick Look. Other documents that can be opened in the version(s) of Pages on your Mac will also open properly in Quick Look from the file chooser.

  • MS Word 2010 product not compatible with Mozilla? Is there a workaround?

    I just purchased MS Office Home and Student 2010. I got an error message that says I do not have a compatible operating system. Is there a workaround if I only use Mozilla Firefox?

    This is apparently not a Firefox related problem. The MS Office 10 setup program doesn't see your computer as having a compatible version of Windows. If you are running Windows XP, you need to have service pack 3 installed. If you are running Vista, you need at least service pack 1. Here is the URL for a support document that may be helpful: http://support.microsoft.com/kb/2267642

  • I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later.  Is there a workaround for this?

    I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later.  Is there a workaround for this?

    No.
    If you don't want to update to the supported software you can't use the device.

  • 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will i have to continue using the previous version to complete older projects?

    Final Cut Pro X 10.2 crashes when I try to convert old libraries for use in the new software. Is there a workaround for this? Or will I have to continue using the previous version to complete older projects? the only foreseeable solution is to begin any new projects on 10.2 or importing footage on 10.2 and starting form scratch--which is something i definitely don't want to do or have time to do. ANY advice, thoughts, or opinions would be greatly appreciated! Thank you!
    Running 10.10.3 // MacBook Pro (Retina, 15-inch, Early 2013) // 2.4 GHz Intel Core i7 // 8 GB 1600 MHz DDR3

    Exactly the same problem with me.
    Some other threads advice to remove fonts, clean the caches, remove add ins but nothing works consistenty, for some it looks like it works, for me it failed.
    What I did not try yet, was to move the Render files out of the malicious library to trash.

  • How can I backup my iphone 4 using iTunes 9.1.1? Is there a workaround for this?

    How can I backup my iphone 4 using iTunes 9.1.1? Is there a workaround for this? I need to backup my phone for replacement but it tells me I need 10.1 or later. All software is up to date, Operating system is 10.4.11. Thanks!

    No sorry. You need to upgrade to v10.5 Leopard (minimum) in order to sync an iPhone 4.
    iPhone minimum requirements:
    Mac computer with USB 2.0 port
    Mac OS X v10.5.8 or later
    iTunes 10.1 or later
    iTunes Store account
    Internet access
    You can upgrade to Leopard if your Mac meets v10.5 requirements.
    Requirements for Mac OS X v10.5
    If your Mac is Intel, you can upgrade directly to Snow Leopard if your Mac meets 10.6 Snow Leopard - Technical Specifications

  • FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

    Hi,
    I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
    For example, what I'm trying to do is below:
    In grid2.column[A], I have the following formula:
    grid1.column[A]
    The result is an error.
    The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
    grid1.column[A] - grid2.column[A] 
    Any help is much appreciated!
    Thanks,
    Tiffany

    Thanks for the detailed response Mike.
    The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection  (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
    Thanks again for your responses. It's very much appreciated.
    Tiffany

  • Is there a workaround for exported Muse html files to render accurately when opened in DreamWeaver d

    Is there a workaround for exported Muse html files to render accurately when opened in DreamWeaver design view?

    Have a look at this thread that should answer your query - http://forums.adobe.com/message/5231996.
    Thanks,
    Vinayak

  • Is there a workaround for the missing global track chords?

    Is there a workaround for the missing global track chords?  i.e. will Apple loops follow the chord progression in a track?

    I found sort of a work around.  I still have Logic Pro 9.  It turns out that if you go into global tracks, analyze the chords then go back to logic pro x the chord progression is preserved.  So the information is preserved there just seems no way to create it in X.

  • Is there a workaround for websites that use "frames" when Safari does not support?

    Is there a workaround for a website that requires "frames" when Safari (5.0.6) does not support it?

    Has anyone found a work-around for this that works?
    No. Any attempt to use an unsupported network device with Time Machine will probably result in data loss, even if it seems to be working at first. If you take data protection seriously, you won't try.
    Is it possible to get Time Machine to use SMB to make the backups?
    No.

  • HT1338 I need to bulk upload to Auctiva (auction software) but Java was disabled on my computer. I have 10.5.8 so does this mean that I can't use Java? If not, then is there a workaround to be able to use the bulk uploader from Auctiva?

    I need to bulk upload images from iPhoto to Auctiva (auction software) that will then be posted to eBay; however Java was disabled on my computer some time ago due to "known issues."  I have 10.5.8 so does this mean that I can't use Java? If not, then is there a workaround to be able to use the bulk uploader from Auctiva? As it stands now, I have to upload photos individually which is super time consuming.

    You can re-enable it for special purposes, opposite of disabling it...
    Disable Java in your Browser settings, not JavaScript.
    http://support.apple.com/kb/HT5241?viewlocale=en_US
    http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
    http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets

  • I can't seem to get the Elements 10 loader to work with Windows 8.1.  Is there a workaround?

    I can't seem to get the Elements 10 loader to work with Windows 8.1.  Is there a workaround?

    Never mind.  I figured it all out.  Thanks anyway.

  • How do I get Adobe to fix this bug/Is there a workaround?

    Searching the internet shows that lots of people have the following problem:
    when using Adobe products on Windows 7 64bit with Outlook 2013.
    How does one get a 'fix' created for this, or is there a workaround? I have seen a workaround that involved editing the registry, and I've tried it, but it doesn't work properly.
    Any help appreciated.
    Thanks,
    PB

    Thank you for your reply.
    This is Acrobat 9.5.5. I understand that 11.0.1 may be required to support Office, but accepting the 'default email' program is a basic function.
    That said, I imagine it is not worth reporting a bug then, as the repsonse will be 'upgrade to the latest version'.
    PB

  • Printing TIFF files hangs the system, is there a workaround?

    When printing large tiff files (e.g., exported layout images from CAD) the system becomes unresponsive and it takes time to print. Even after the image is printed, the system works very slowly.
    It seems to be a bug, or is there any workaround to prevent the system to hang?
    Thank you, Jan

    There are two similar bugs:
    The LPC+crop bug started with ACR 6.1 and was fixed in 8.2.
    The LPC mystery bug started with ACR 7.3 and was fixed in 8.6.
    Both bugs cause repeated thumbnail extractions in Bridge on some images with Lens Profile Corrections enabled.
    As you are on ACR 6.7 it can only be the first bug. The only workaround I know is to ensure that the crop does not touch the edge of the corrected image. A few pixels gap will do it. Also, it helps to keep less images in a folder--but this can't be avoided when using Collections or Finds.
    I'd imagine that Adobe won't fix CS5 just for this. Presumably there's something in the smallprint which admonishes them from responsibility after the shelf life of the product ends. To be fair, it's not like they fixed it straight away in CS6, unlike the Bridge CS5 database bug (thanks, Adobe). They were only able to reproduce the fault in summer 2013.

  • Exported MPEG2 Audio Won't Play in Quicktime - is there a workaround?

    Just completed my first video edit in Premiere Elements.   Working with 720p HD footage from a Sony Cybershot.    Tried various preset outputs, HD 720p 25, among others.   In all cases, picture looked good but audio did not play back.   Just discovered after some searching that Quicktime will not playback MPEG2 audio without a $20 add on.  That's not going to break my bank, but do I really need it?   Is there a workaround for this?   Can I export in Dolby Digital?   My goal is simply to have a finished project that is the most universally playable as possible.  Will eventually archive on tape and DVD.   Obviously, want to maintain the best sound as possible.

    Instead of using Apple's QuickTime Player, I would suggest looking into another player, such as VLC Player, or MediaPlayer Classic HC, both of which are free, and both of which have a very full set of CODEC's included in them.
    For the best possible Audio, it would be best to choose PCM/WAV as the Audio CODEC. This is almost totally universal, and unlike all MPEG Audio (including AC3), is uncompressed. The file will be a bit larger (Audio does not take up as much space, as does the Video), but should give better quality, and not require additional CODEC's for users to play the file w/ Audio. This might not be an option in all possible Export/Share schemes.
    For either PCM/WAV, or AC3 Audio, this will be set from the Audio Tab in the Export/Share settings. Remember setting the Encoding for the Audio might not be available in all formats, so just check that Audio Tab in the settings dialog screen (usually under Advanced).
    As for DD Audio, you can set the Audio Encoding to AC3, wich is Dolby Digital, but that option might not be available with all possible Export/Share formats, so it gets down to an "it depends." This will be stereo (2-channel) Audio.
    PrE cannot Encode to DD 5.1 SS (6-channel), as it lacks that Encoder. Even PrPro needs the Minnetonka Audio SurCode Encoder plug-in (US$300 option) to do DD 5.1 SS Export.
    Good luck,
    Hunt

Maybe you are looking for

  • Is that possible to add a listener to a class that bind with a image?

    Hello, I am trying to add listener to a class that binds with image.  For example, I want to add listener to customDividerSkin(see example below, i bold and underline the text), so when user click the customdividerSkin image haloGreen box will be hid

  • Full Screen mode - file Name

    Hi Is there a way to display the file nane in Full Screen Mode.. This would speed things up for me.. we take 2 or 3 shot of every kid.. We rename all the files. So going back and for trying to pick the best one and delete the others. We are making th

  • Itunes and windows xp not finding my ipod nano..anyone know how to fix it?

    I got my ipod nano for xmas, and was really pleased with it. But 3 days on, the computer couldnt find it in my computer OR my devices. Then itunes failed to find it. Im now totally stuck, i have tried changing USB ports and basics like that.. but it

  • Date and time have changed

    The date and time on my iTunes (Windows computer) is no longer accurate. How do I rectify this?

  • How to make .mp4 video play on android tablet using Adobe Flash CS6 with AIR

    Hey, Im using Adobe Flash Professional CS6 with AIR, im a bit of a novice when it comes to this. But for university I have to make an application for an android device that plays short videos. Ive imported the videos onto the library and placed them