Ont turn on when its not pluged in the screen blinks wipod touch when its pluged in it blinks the apple help
ipod wont turn on when you push the button it blinks when its plugged in it just blinks the apple
Try to reset the ipod by holding the sleep and home button until the Apple logo comes back again. If this does not work, connect in recovery mode and restore: http://support.apple.com/kb/HT1808
Similar Messages
-
When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
i am on a Windows 7 professional PC, 64-bit.If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."
Earlier i was able to use all application in this using IOS 5.0.1.
I have format it and after that i am not able to use it.
How to restore my itunes to 5.0.1???Well, welcome to the world of "hacked" phones. If your purchase was from the US, you obviously purchased an iPhone that is locked to a US carrier. The iPhone must have been jailbroken and unlocked via software to accommodate your foreign SIM card. Now that you have updated the phone, it is locked back to the US carrier. Only the carrier can authorize Apple to unlock the iPhone and none of the US carriers will unlock the iPhones. Best suggestion is to sell the phone and obtain a factory unlocked version directly from the Apple store.
To answer your other question, there is not a supported method to downgrade iOS. -
i purchased a tom petty album. one of the songs won't play. it says its not authorized to play on my computer. so when i choose to authorize it, it says it is already authorized and it continues to not play. totally frustrated, how do i fix this? i swear i'm so sick of this. itune is such a pain.
Delete the song (move it to the Trash) and download it again under iTunes Store>Quick Links>Purchased>Music>Songs>Not in My Library.
Cheers,
GB -
How can Apple claim the iPhone has a Super-High res screen when its not even HD? From what I understand, 1280x720 is basic high definiton, and the retina screen only goes up to 1136x640.
There's more to resolution than pixel count. Consider the pixel size on the iPhone screen in comparison to the pixel size on your forty inch HD TV.
-
My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!
Go step by step and test.
1. Restart
2. Shut down the computer.
Clean the trackpad with moist not wet microfiber cloth.
System Preferences > Point & Click
Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM: http://support.apple.com/kb/PH14222
5. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
Select Disk Utility from the drop down. When the Disk utility window opens up,
select Macintosh HD, then First Aid.
Click Repair Disk Permissions button.
Ignore the time remaining estimate.
Last 1 minute may take longer. -
My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??
1. Press the F2 key couple of times.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me
tmplHi pranoop,
If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
my phone just turned off and will not go back on. my top lock button has been broken for over a year. Help! I have tried plugging it into wall unit and computer but my home button just doesnt do anything!
It seems that year long delay from having your lock button repaired has finally caught up to you. Sounds like you have some damage to your phone that requires repair/replacement. Take it to a Apple store or contact Apple Tech Support.
-
When phone not muted, why isn't there any audio when using facetime?
When phone not muted, why isn't there any audio when using facetime?
What version of iMovie?
What camera? -
When I turn on a video the screen on my MacBook Pro freezes. I've been through Apple Care and they couldn't fix the computer. I think the fan and the graphics are the problems. I can restart after two attempts. Sometimes I use SAFEBOOT
Please advise the model MBP you have and the OSX you have installed.
Also try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
i need help. i tried updating the software on my ipod touch, and it looked like it was working fine, because it said "verifying update", but suddenly the screen went black and when i tried to turn it back on, it only had a picture of a usb chord pointing to the itunes icon. what do i do?
Your iPod has dropped into Recovery mode. You'll need to restore it via iTunes on your computer.
http://support.apple.com/kb/ht1808
Regards. -
My MacBook won't turn on ? It's on an updating screen then shuts off when I turn it back on the same things happens again over and over
On the bottom of your MBP is the serial number. Enter it here and post back the model/year information:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
What OSX do you have installed?
Ciao. -
How to give error message for the screen element text field when wrong i/p
How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar ShuklaHi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla, -
My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
i have tried manythings but it doesn't work
i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.
Maybe you are looking for
-
IPod Touch no longer working with car Head Unit since update
Hi there, I have a problem with using my iPod Touch with my car's head unit. I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update
-
ORA-00604: error occurred at recursive SQL level 2
Hello, I am trying to create a simple table and I am getting a ora error as below. SQL> create table album(name varchar2(100),image blob); create table album(name varchar2(100),image blob) ERROR at line 1: ORA-00604: error occurred at recursive SQL l
-
Can't log in as a user created in Workgroup Manager
I am a little confused about users created in Workgroup Manager. I have created an account with all the proper permissions to log in etc. Their home directory is listed as afp://home/Users (home is the name of the server). The directory for the user
-
Double Check This RAM will work in my MAC PRO please?
Hi! I'm going to upgrade the RAM in my Mac Pro from 2006. Here are the model details: Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 2.66 GHz Number Of Processors: 2 Total Number Of Cor
-
---URGENT---My Camera JUST stopped showing up in the iPhoto Library...
I usually import photos once a month or more into my library, so I decided to import photos today... especially since I need to get a certain photo on my computer to email to someone BY TONIGHT- and even though my camera usually works fine with the p