OnXMPdata not triggered for F4V

Hi,
For some reason onXMPdata is not triggered. When I export to FLV, onXMPdata is fired. And all works.....
It is suppose work in FP10.
Any ideas? besides switching to FLV

Hi Uwe,
Many thanks for your response, well i did run the report name that you said me.. when i executed that report i got a workitem as "ALARM Message from Active IDoc Monitoring" and workitem for EDI syntax errors"EDI: Partner profile inbound not available"
But my objective remains unsolved.. i need the error status of idoc to be generated, do u have any idea or solutions, kindly share it as its the 3rd day that am still into the same task....
Regards,
Rusidar S.

Similar Messages

Release strategy not triggering for Specif plant

Hi Friends
I configured a release strategy with three charecteristics. P.org, Plant, Net value.
this stretegy is triggering for specific plants which are under a particular company code, and if I change to my plant and P.org. its not triggering.
I have deleted all the classifications and release strategies from, no other data in VV_T16FS_2 , AUSP,T16FV,and T16FS tables except this release strategies data.
do we have any settings at cocode level??????
please respond if answer known
Points would be awarded for for your valuable answer.

Thank you deepak for your quick respond
Actually There were already release strategies with same charecteristics, and with the values of other plants and other P.orgs which are under certain companycode.
these were triggering perfectly for PO
Now created new strategy for plant and P.org under different plant code of different cocde. this strategy not triggering for PO.
but if the release strtegy values replaced by the erlier plants and P.org again its triggering.
Now I created new chars, class, and stategies still same problem persists.
Release stategy working for the values of a prticular company code plants, Porgs.
and already tried your suggestion Cocode as char. but same its working for only that company code not for my companycode

Enter event not triggering for read-only checkbox

I have some objects in a form that get "locked" when the user signs the form. I'm not using the digital signatures. Instead, when the user types their name into the signature text field, a script runs on the change event that makes all of the fields in the form read only. It also unlocks the fields if the signature is deleted.
I was worried that we would get a lot of phone calls with users that didn't understand that the form had locked ("Why doesn't this form work?!"), so I added some code to the enter event for all of the fields that would pop up a messagebox to explain to people trying to edit a signed form that the form was locked and that they would need to delete the signature to edit the form.
This plan works perfect for my text fields and decimal fields. It does NOT work at all for my checkboxes. For some reason, the enter event is never triggered for read-only checkboxes. I don't see any other events that would obviously work for me though. Any ideas?
Thanks

Thanks, those are reasonable suggestions.
In the first suggestion, I'm unclear about one aspect of how I would accomplish this. I assume I would allow people to modify fields in the form, but that when they did, a msgbox would pop up that would inform them that, if they continued with this modification to a signed form, the signature would be removed. I'm all good to that point. But if they answered that they do not want to continue modifying that field and removing the signature, how can I code it to set the value back to what it was before the change? Is there some method that will give me access to the value of the field BEFORE the attempted modification? I went looking for something like $.previousvalue, but found nothing.
I'd suggest that I could use a two-stage solution, in which I store the previous value on the enter event, and save it just in case they do not want to change the field when prompted by the msgbox, but since the enter event does not exist for checkboxes (my original problem), that seems like it won't work.
As far as radio button suggestion, I like radio buttons very much except for one fatal flaw: they aren't (as far as I can tell) clearable. That is a shame. Clearly some people (like me) want both exclusivity AND clearability. And we'd like the controls to have an enter event. But I know I'm demanding Anyway, as it is, I just end up having to use checkboxes and create a boatload of silly code to make them exclusive.
Emily

PO Release Strategy not triggerred for particular Total Net Order Value

Dear,
I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
Please suggest for solution.
Thank you.
Warm Regards.

Dear All,
While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
May I know how the value for this field gets calculated.
Thank you.
Warm Regards.

After Update Trigger not triggering for first update

Hi All,
I have written a Trigger on AP_SUPPLIERS table to update AP_SUPPLIER_SITES_ALL when payment priority gets updated on AP_SUPPLIERS table. Trigger calls a pragma autonomous procedure after update happens, and updates sites table. We are on R12 (12.1.3) with DB 11.2.0.3.0
Somehow this is not working for the first update, after that for every update it is working. Any idea why this might be happening?
Trigger Code:
CREATE OR REPLACE TRIGGER XX_AP_SUPPLIER_SIT_UPD_SYNC
AFTER UPDATE
ON AP.AP_SUPPLIERS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
l_vendor_id     NUMBER;
l_paym_priority NUMBER;
BEGIN
   XX_AP_SUPSITE_UPDATE(:NEW.PAYMENT_PRIORITY, :NEW.VENDOR_ID);
   EXCEPTION
     WHEN OTHERS THEN
       RAISE;
END XX_AP_SUPPLIER_SIT_UPD_SYNC;
Procedure Code:
CREATE OR REPLACE PROCEDURE APPS.XX_AP_SUPSITE_UPDATE (p_payment_priority IN NUMBER,p_vendor_id IN NUMBER) AS
PRAGMA AUTONOMOUS_TRANSACTION;
ex_custom EXCEPTION;
PRAGMA EXCEPTION_INIT( ex_custom, -20001 );
BEGIN
UPDATE AP_SUPPLIER_SITES_ALL
SET PAYMENT_PRIORITY =p_payment_priority
WHERE VENDOR_ID = p_vendor_id;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
    raise_application_error( -20001, 'Error while updating payment priority on Site '||SQLERRM );
END XX_AP_SUPSITE_UPDATE;

Thanks for your replies Saubhik/VT,
now my trigger is compiled. but is not triggering. pl help me to resolve .....
create or replace
TRIGGER AUDIT_DEV.trg2
AFTER DELETE OR UPDATE OF EMP_STATUS ON AUDIT_DEV.AUDIT_PERSONS
FOR EACH ROW
declare
OSUSER varchar2(30);
     MACHINE varchar2(30);
     logon_time date;
db_user varchar2(30);
USERNAME VARCHAR2(30);
EMP_USER_MODIFIED AUDIT_PERSONS.EMP_USER_MODIFIED%TYPE;
     EMP_DATE_MODIFIED AUDIT_PERSONS.EMP_DATE_MODIFIED%TYPE;
     EMP_SK AUDIT_PERSONS.EMP_SK%TYPE;
     EMP_ID AUDIT_PERSONS.EMP_ID%TYPE;
     EMP_NAME AUDIT_PERSONS.EMP_NAME%TYPE;
EMP_RESIGNATION_DATE AUDIT_PERSONS.EMP_RESIGNATION_DATE%TYPE;
BEGIN
select     username,osuser,machine,logon_time into db_user,osuser,machine,logon_time from v$session where sid=(select sid from v$mystat where rownum=1);
INSERT INTO AUDIT_DEV.AUDIT_PERSONS_LOG (EMP_USER_MODIFIED,EMP_DATE_MODIFIED,EMP_SK,EMP_ID,EMP_NAME,EMP_RESIGNATION_DATE,EMP_STATUS_OLD,EMP_STATUS_NEW,osuser,db_user,machine)
VALUES(EMP_USER_MODIFIED,EMP_DATE_MODIFIED,EMP_SK,EMP_ID,EMP_NAME,EMP_RESIGNATION_DATE,:old.EMP_status,:new.EMP_status,osuser,db_user,machine );
COMMIT;
END;
09:59:06 AUDIT_DEV@dev>UPDATE AUDIT_DEV.AUDIT_PERSONS SET EMP_STATUS='TEST' WHERE EMP_ID='4234';
EMP_STATUS
TEST
1 row selected.
Elapsed: 00:00:00.01
10:00:03 AUDIT_DEV@dev>commit;
Commit complete.
Elapsed: 00:00:00.01
10:00:17 AUDIT_DEV@dev>select * from AUDIT_persons_log;
no rows selected
Elapsed: 00:00:00.00
10:00:17 AUDIT_DEV@dev>
Edited by: Abk on Nov 4, 2010 10:42 AM

RSPPFPROCESS - mail not triggering for incorrectly processed PO

Hi All,
I tried executing the RSPPFPROCESS by giving a variant but I am not able to get the details of any incorrectly processed purchase orders in the output.
The RSPPFPROCESS program functions in such a way that if a PO is unsuccessfully processed, then on executing the RSPPFPROCESS program with status "Unsuccessfully Processed" a mail will be triggered to the creators whose POs were incorrectly processed.
But this is not happening in my case, the mail is not getting triggered at all.
The variant details are:
Application : BBP_PD
Action Profile : BBP_PD_PO
Action Definition : STANDARD_PO
Promotion status : 2 (ie)incorrectly processed
Processing type : MET
Time of Processing : Processing when saving document
The radio buttons: Ignore "Repeat" flag and Ignore "Generated Manually" flag are checked.
The check box "Number of Actions Outputted" is checked.
Please help.
Thanx in advance.
Regards,
Mary Catherine

Hello Prasath,
Please check your configuration on ERP/ECC
side in transaction SWETYPV. Here you can enable or disable the
event type linkage for BUS2012 and for CL_SE_PUR_PO_WF_OUT or any
customer-specific business object related to Purchase Orders which might
be in use. If you disable the event linkage for CREATE and/or change
event, no message will be triggered upon PO creation.
If this is not sufficient for your business process the usual logic is
that all Purchase Order message are being sent out when the event
linkage is active (e.g. you want to send out only some of the message
types possible). In this case you might want to make use of BAdI
PUR_SE_PO_INTERFACE_OUT_SELECT (enhancement spot / BAdI)."
Enhancement Spot: PUR_SPOT_SE_PURCHASE_ORDER
BAdI Definition: PUR_SE_PO_INTERFACE_OUT_SELECT
Interface:        IF_PUR_SE_PO_IF_OUT_SELECT
BADI definition   PUR_APPL_SE_POCONF_IN_ASYN
Also in the standard, for the following messages
   PurchaseOrderChangedInformation_Out
   PurchaseOrderERPRequest_Out_V1
   PurchaseOrderERPConfirmation_Out
we are sending out these information as soon as a purchase Order is
created. We do not distinguish between the services all of them will be
triggered.
Hope this hepls
Ray

Workflow mail not triggering for PO's to the Manager

Dear Seniors,
I am creating a PO and keeping in hold and later on saving the PO. But for those kind of PO's, the manager is not getting the mail for approval. But if i create a PO without keeping in hold with same data, system is triggering the mail to the manager. Why is it so? how can i make the settings to trigger the mail for hold-saved PO's. Please guide me.
Regards,
Prasath J

Hello Prasath,
Please check your configuration on ERP/ECC
side in transaction SWETYPV. Here you can enable or disable the
event type linkage for BUS2012 and for CL_SE_PUR_PO_WF_OUT or any
customer-specific business object related to Purchase Orders which might
be in use. If you disable the event linkage for CREATE and/or change
event, no message will be triggered upon PO creation.
If this is not sufficient for your business process the usual logic is
that all Purchase Order message are being sent out when the event
linkage is active (e.g. you want to send out only some of the message
types possible). In this case you might want to make use of BAdI
PUR_SE_PO_INTERFACE_OUT_SELECT (enhancement spot / BAdI)."
Enhancement Spot: PUR_SPOT_SE_PURCHASE_ORDER
BAdI Definition: PUR_SE_PO_INTERFACE_OUT_SELECT
Interface:        IF_PUR_SE_PO_IF_OUT_SELECT
BADI definition   PUR_APPL_SE_POCONF_IN_ASYN
Also in the standard, for the following messages
   PurchaseOrderChangedInformation_Out
   PurchaseOrderERPRequest_Out_V1
   PurchaseOrderERPConfirmation_Out
we are sending out these information as soon as a purchase Order is
created. We do not distinguish between the services all of them will be
triggered.
Hope this hepls
Ray

Message type EDI is not triggering for outbound deliveries

Hello,
When ever the shipment status is completed message type EDI is triggered for the outbound delivery.
However, in spite of the shipment completion the DESADV EDI message is not created in the outbound delivery.
So, i request you to help me in this issue.
Regards,
Anil

Hi,
1st please check the partner porfile for whom it is sent ( Eg -- Ship to party) using T.code WE20 in partner type ku, look for the customer for whom it is sent.
Check for the message type wheter it is add in outbound parameteres.
Finally check the varaint of shipment whether the required output is maintained in the shipment varaint and also make sure that condition record is maintained for the output.
You find some solution with this.
Regards
vk

Workflow not triggered for BP when start condition's field is set by BADI

Hi guys,
I have created a workflow and given the start Event "Changed" of object BUS1006. In this I have given a start condition which triggers this event when a particular field on transaction BP is populated.
Now the problem is that when I myself explicitly populate the field and press save the workflow is triggered fine, but when I populate that field automatically in a Save BADI (BUPA_GENERAL_UPDATE), the workflow is not triggered. Tcode swel just returns the msg that Start condition returns 'FALSE' for object.
Can someone please help me in this or let me know where I can find its cause in system.
Any help would be really appreciated.
Regards,
Shaili

If this is just one field, create your own custom event and code launching it when saving BP with your field changed.
Maybe event Changed is executed only for changes in GUI.
If you program your own one you will have 100% control of it.
Regards
Radek

Workitem not triggered for Inbound IDOC Error (ORDERS05)

Hi,
The work item is triggered for the Syntax Error in the Idoc (EDI: Partner profile Not Available).
But, as per my requirement i need to get the idoc error status (as Workitem) , any help regarding the resolution of this issue is highly appreciated.
Regards,
Rusidar S.

Hi Uwe,
Many thanks for your response, well i did run the report name that you said me.. when i executed that report i got a workitem as "ALARM Message from Active IDoc Monitoring" and workitem for EDI syntax errors"EDI: Partner profile inbound not available"
But my objective remains unsolved.. i need the error status of idoc to be generated, do u have any idea or solutions, kindly share it as its the 3rd day that am still into the same task....
Regards,
Rusidar S.

MouseEvents are not triggered for JMenu

I would like to listen for MouseEvents but i'm not sure if it is a bug in java or some lack of knowledge on my side concerning event handling.
I have a simple menu with one mouse listener and seems that mouseReleased and mouseClicked events are not triggered always as i would expect.
if i run the code that has been attached below, than i have the following strange scenarios.
Menu0 is not opened and click on it once:
pressed Menu0
clicked Menu0
There is no mouseReleased received. why?
Menu0 is opened and click on it once again:
pressed Menu0
released Menu0
clicked Menu0
Menu0 is collapsed and i have all the events. ok
Menu0 is opened and click on Menu1:
pressed Menu1
released Menu1
Menu0 is collapsed and there is no mouseClicked event. why?
Menu0 is opened and go over Menu2 and click on it:
pressed Menu2
clicked Menu2
There is no mouseReleased event. why?
Press the mouse over Menu2 and release it over Menu3:
pressed Menu2
released Menu2
why is it 'released Menu2' and not 'released Menu3' if it is pressed and released Menu2 than where is the clicked event anyway.
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import javax.swing.JFrame;
import javax.swing.JMenu;
import javax.swing.JMenuBar;
import javax.swing.JMenuItem;
public class MouseEventTest
     public static void main( String[] args )
          JFrame frame;
          JMenuBar menuBar;
          JMenu menu, subMenu;
          JMenuItem menuItem;
          MouseListener mouseListener;
          mouseListener = new MouseAdapter() {
               public void mouseEntered( MouseEvent e )
               public void mouseExited( MouseEvent e )
               public void mouseClicked( MouseEvent e )
                    System.err.println( "clicked " + ((JMenuItem) e.getSource()).getText());
               public void mousePressed( MouseEvent e )
                    System.err.println( "pressed " + ((JMenuItem) e.getSource()).getText());
               public void mouseReleased( MouseEvent e )
                    System.err.println("released " + ((JMenuItem) e.getSource()).getText());
          menuBar = new JMenuBar();
          menu = new JMenu( "Menu0" );
          menu.addMouseListener( mouseListener );
          menuBar.add( menu );
          menuItem = new JMenuItem( "Menu1" );
          menuItem.addMouseListener( mouseListener );
          menu.add( menuItem );
          subMenu = new JMenu( "Menu2" );
          subMenu.addMouseListener( mouseListener );
          menu.add( subMenu );
          menuItem = new JMenuItem( "Menu3" );
          menuItem.addMouseListener( mouseListener );
          subMenu.add( menuItem );
          menuItem = new JMenuItem( "Menu4" );
          menuItem.addMouseListener( mouseListener );
          subMenu.add( menuItem );
          frame = new JFrame();
          frame.setTitle( "MouseEvent test for JMenu" );
          frame.setBounds( 320, 240, 320, 240 );
          frame.setJMenuBar( menuBar );
          frame.addWindowListener( new WindowAdapter() {
               public void windowClosing( WindowEvent e ) {
                    System.exit(0);
          frame.setVisible( true );
}

Well there are differences across Operating Systems. For example I'm using JDK1.4.2 on XP. When I click on Menu0 I get:
pressed Menu0
released Menu0
clicked Menu0
It is always better to use a "higher" level event when possible. In this case you should be using an ActionListener, if you want to know when a menu or menuItem is clicked. Or maybe you could use a MenuListener to know when a menu is opened and closed.

Park document not Triggering for one user only

Hi Guys,
I have a problem where one user is using FBV1 park document and WF i not triggering at all and if the same user create document for any other company the WF is going through. Any idea Why..
Thanks
Atul

Hi,
Check for the start conditions (if any) maintained regarding to the document type or company code etc..
This will give an idea about the issue.
Regards,
Manikandan R

Validation on line items not triggering for MR41 tcode

Hi,
I have to put a validation on MR41 to check the amount entered on the screen. I am using OB28 to define the validation. Also, I have created user exit in the validation/substitution program where the necessary checks are done. But the validation is not triggering at the line item level. I have another validation of MR41 at header level, that is working perfectly. I want the validation to trigger at line item level also.
Any ideas on how to do it?
Thanks in advance.
Regards,
Arun Mohan

Hi,
Try with user exit MM08R002 under this u can find thease exits.
EXIT_SAPLKONT_002
EXIT_SAPLMR1M_001
EXIT_SAPLMRMC_001
Reward points
Regards

Alerts not triggered for a RFC Adapter

Hi All,
I have done the alert configuration for triggering alerts whenever there is a problem in any communication channels of any adapter.i.e. I have given * for 'where did the error occur'.Alerts are being triggered for JDBC and File adapetrs.but when an error occurs in a RFC adapter no alerts are triggered.What can I do about it?
Thanks and Regards,
Jishi

Jishi Abraham,
Could u please try No Restrictions in the 'where did the error occur'
All of the File, JDBC and RFC adapters, reside on the Java Stack. Whenever there is a message being processed, by any of the adapters except for IDoc and HTTP, the config should be similar as far as the alerts are concerned.
Please try No Restrictions and let us know.
Reg,
-Naveen.

Workflow not triggered for PR from MRP run

Hi,
I have PR Release strategy workflow configured, working well when i try to create PR manually, triggers workflow.
PR's created thorugh MRP run, triggers release strategy but not workflow.
I checked the event trace 'releasestepcreated' event not triggered through MRP run.
Please respond ASAP.
Your inputs will be highly appreciated.

The response i got from SAP.
Please see note 67866 Purchase req. from materials planning -> no workflow
Thanks,
Indira

OnXMPdata not triggered for F4V

Similar Messages

Maybe you are looking for