Onyx Blackbird not working w/Mavericks

hello,
i upgraded to mavericks last week and my onyx blackbird 16x16 is not responding. it plays fine for about 30 seconds and drops out.  rebooting the machine and turning the blackbird on and off get the same response.  30 seconds and out.
is anyone else experiencing this problem? 
i hope i don't have to wait for onyx to issue new drivers as they are slow responders.
djnimbin
imac 27 late 2013
3,5 ghz i7
nvida gtx w/4gb
3tb fusion
8gb ram

update:
i've been working with Mackie tech support. no luck. 
they suggested:
uninstalling driver and control panel. resinstalling from .dmg they sent. then going directly into the imac thunderbolt>firewire800.firewire400.
same results. .30 seconds and gone.
fyi. 

Similar Messages

  • IDVD is not working in Mavericks... what now?

    I am very upset that iDVD is not working in Mavericks! I need the ability to burn DVDs for family who is unable to access the internet. Any patches or fixes available to make this software usable again? I am very disappointed that Apple would do this without warning users that previously purchased software would be incompatible with the new OS.

    I am also having problems with iDVD under Mavericks. I have used iDVD for many years creating DVD's for family members and archiving our vacations. It worked great under Snow Leopard, Lion, and Mountain Lion, but now Mavericks is a different situation.
    I have two basic problems, (1) after importing the video I want to use, I play it back to preview and a small band shows up at the top of the screen that is not in sync with the rest of the screen. And (2) when showing a slideshow using standard jpegs there are color issues on playback. Help,  I need my iDVD back!

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

    I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

    HI Dave,
    I'm surprised you get no message when you attempt opening the Excel document in Numbers.
    I'm assuming Numbers 3.1, since you are running Mavericks.
    Does the Numbers file that opens show any content?
    Does it contain a table?
    How large?
    Does it contain more than one tab (indicating more than one sheet)?
    Do those other tabs contain a table?
    Have you checked those tables for data content?
    There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
    I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
    Regards,
    Barry

  • I started to download Maverick but then read that Word and Excel do not work  with Maverick.  I hit pause on the download. How do I stop the download.  In non technical terms please!

    How do I stop the download of Maverick on my MacBookPro?  I started downloading then discovered that 2008 Word and Excel do not work  with Maverick. I have too many files in the 2008 version to upgrade them at this time.  I just need instructions in non technical terms to stop the Maverick download.

    I did the same as Tapmr and have paused the "upgrade".  So am I to understand that the upgrade only downloads and will not automatically install it?  I am an extreme novice here, and cannot afford any issues after I upgrade/download.  I don't know how to make a clone copy as you suggested either.
    I need assurance that if the upgrade is allowed to continue that I will be able to delete the upgrade downloaded and continue on as before with my regular system. 

  • I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

    I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

    The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
    Tell us what steps that you are taking to configure the Express and what happens after each step.

  • App store, Safari, software updates, icloud, do not work in Mavericks 10.9 using a proxy server

    App store, Safari, software updates, icloud, do not work in Mavericks 10.9. these problems are interrelated I am sure. Apple apps were working fine in 10.8.5 I could do software updates through a proxy server using password authentication. I reinstalled a new system 10.9 on another partition and it won't let me use Safari or update software using a proxy server. Firefox works fine (I am using it to post). I am very disappointed that this wasn not fully tested BEFORE releasing Mavericks. Any solutions would be greatly appreciated.

    I had this problem myself.
    Checked the system log with Console, and I found the entry:-
    Nov 11 11:16:41 teds-new-mac.ad.mycompany.co.uk ocspd[537]: Authentication challenge received for "10.203.39.212:8080", unable to obtain proxy server credential from System keychain.
    For some unknown reason, Mavericks seems to be looking in the System keychain, when these credentials are actually held in the Login keychain.
    So, I tried "Copy & Paste"  - copying the https user name & password from the Login keychain and pasting into the System keychain, which worked but it's not quite as straightforward as I initially thought.
    Pasting into the System Keychain was, I found a not-very-intuitive process:
    Having opened your Login Keychain, click once on the item to be copied and when it's highlighted, select "Copy" from the Edit menu or, of course, cmd+c.
    Select the System Keychain:- DO NOT CLICK THE PADLOCK IN THE TOP LEFT TO UNLOCK IT.
    From the Edit menu, select "Paste" or cmd+v.
    You will then get a dialogue box,, enter your administrator's password and select "Modify Keychain" or just hit return, as it's the default entry.
    I found a restart was in order before it recognised everything and would accept https pages without alert boxes, but YMMV.
    Funnily enough - and this is where it seems counter-intuitive, if you do click on the padlock and unlock the System Keychain, "Paste" is greyed out in the Edit menu and cmd+v has no effect.
    Exactly the opposite to what I'd expect..

  • Mac Mail's smart mailbox's tagged-serach does not work in Mavericks.

    Smart mailbox's tagged-serach does not work in Mavericks.
    Tagged search such as "from:amazon OR from:yahoo" does not return any result in a smart mailbox. A strange thing is that it still works in the search box on the tool bar, but once the "Save" button is pressed to convert to a smart mailbox, it stops working.

    Smart mailbox's tagged-serach does not work in Mavericks.
    Tagged search such as "from:amazon OR from:yahoo" does not return any result in a smart mailbox. A strange thing is that it still works in the search box on the tool bar, but once the "Save" button is pressed to convert to a smart mailbox, it stops working.

  • Why iMessages, facetime, app store, etc  I do not work in maverick? please solution  thanks

    why iMessages, facetime, app store, etc  I do not work in maverick? please solution  thanks

    Philip, many people have talked about this "blue lego" problem, but you are the first to explain it (migrating to Intel) that brings clarity to the issue. The Business and People widgets use small "webkit" plugins in order to do their work. However, the plugins on the PowerPC versions of these widgets are NOT Universal, and thus will not run on an Intel Mac.
    Typically, this should never be an issue because an Intel Mac comes with widgets already installed (the Universal versions of these widgets, which include Universal versions of these plugins).
    However, if I understand you correctly, you "migrated" your old files from your PowerPC Mac to your new Intel Mac. Is it possible you overwrote your Intel OS X default widgets (the 18 widgets in [Hard Drive]/Library/Widgets) with the versions from your old PowerPC Mac during this migration?
    If so, then that is the source of your problem: you replaced your Universal widgets with PowerPC widgets. The solution is to reinstall your widgets from the Installer that came with your new Intel Mac. You can either re-install OS X entirely, or use Pacifist to just install those overwritten widgets.

  • Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Re: Safari 7.0 zoom not working after Mavericks upgrade.

    Hey there sarunelis,
    It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
    Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    http://support.apple.com/kb/ts3230
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • ESATA express card does not work with Mavericks. Any suggestions?

    This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
    Thanks for any help or suggestions.

    The driver has to come from the manufacturer of the card, so your two options are to get another card or to use your full backup to go back to 10.7.5. That assumes it's a clone backup and not Time Machine.

  • Zoom the screen with ctrl   2-Finger Swipe not working in Mavericks

    I just bought a new Macbook Air for my wife (running Mavericks) and can't figure out why the Zoom the screen with ctrl   2-Finger Swipe is not working.
    I can't find the setting anywhere. 
    I looked on my Macbook Pro running Mavericks (on which the zoom still works), but I cannot find the setting on that computer either.
    Please help.
    Thanks

    System Preferences---> Accessibility---> Zoom---> Use scroll gesture with modifier key to zoom. Select ctrl in the drop down menu.
    It's a feature not normally turned on, so you might of had it turned on on your Mac before upgrading to Mavericks. And it just kept the setting.
    KOT

  • Most of the default Mac Apps does not work after Mavericks Upgrade

    Hi, I did everything, but nothing has brought me out of this misery .
    I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
    All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
    I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
    Hoping to get some response soon from Apple support team to help me.

    Hi Arthur,
    Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
    And below is the report generated from EtreCheck. Hope it can help me find the solution.
    Hardware Information:
              iMac (20-inch, Early 2008)
              iMac - model: iMac8,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              ATI Radeon HD 2400 - VRAM: 128 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
              HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
              HP IO - Path: /Library/StartupItems/HP IO
              HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
              MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
              MySQLCOM - Path: /Library/StartupItems/MySQLCOM
              ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
              VirtualBox - Path: /Library/StartupItems/VirtualBox
    System Software:
              OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
    Disk Information:
              WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple, Inc. Keyboard Hub
                        Apple, Inc Apple Keyboard
              Western Digital My Book 1110 999.5 GB
                        WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
                        PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
              Apple Inc. Built-in iSight
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.logmein.driver.LogMeInSoundDriver          (1.0.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [failed] com.google.GoogleML.plist
              [loaded] com.google.keystone.daemon.plist
              [not loaded] com.logmein.logmeinserver.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.wdc.WDDMservice.plist
              [loaded] com.wdc.WDSmartWareServer.plist
              [loaded] rapiback.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.google.keystone.agent.plist
              [loaded] com.logmein.logmeingui.plist
              [not loaded] com.logmein.logmeinguiagent.plist
              [not loaded] com.logmein.logmeinguiagentatlogin.plist
              [loaded] syncmateStarter.plist
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.adobe.ARM.[...].plist
              [loaded] com.facebook.videochat.[redacted].plist
              [loaded] com.macpaw.CleanMyMac.helperTool.plist
              [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
              [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
    User Login Items:
              AirPort Base Station Agent
              EarthDesk Engine
              LMILaunchAgentFixer
              AdobeResourceSynchronizer
              RealPlayer Downloader Agent
              Windows Phone 7 Connector Agent
              iAntiVirus
              TextEdit
              StatusMenu
              HP Scheduler
              WDQuickView
    3rd Party Preference Panes:
              Application Enhancer
              DivX
              EarthDesk
              Fan Control
              Flash Player
              Flip4Mac WMV
              Growl
              MacFUSE
              WDQuickView
    Internet Plug-ins:
              AdobeExManDetect.plugin
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Default Browser.plugin
              DirectorShockwave.plugin
              DivXBrowserPlugin.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              QuickTime Plugin.plugin
              RealPlayer Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              Picasa.plugin
              Unity Web Player.plugin
              WebEx.plugin
              WebEx64.plugin
    Bad Fonts:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  29%          mds
                   2%          WindowServer
                   1%          mds_stores
                   1%          LogMeInGUI
                   1%          RealPlayer Downloader Agent
                   1%          EtreCheck
                   1%          FanControlDaemon
                   0%          uTorrent
                   0%          notifyd
                   0%          networkd
    Top Processes by Memory:
              1.00 GB            mds
              106 MB             mds_stores
              78 MB              Google Chrome
              49 MB              Finder
              45 MB              WindowServer
              40 MB              Google Chrome Helper
              37 MB              VLC
              29 MB              uTorrent
              20 MB              EtreCheck
              16 MB              DashboardClient
    Virtual Memory Statistics:
              43 MB              Free RAM
              989 MB             Active RAM
              934 MB             Inactive RAM
              447 MB             Wired RAM
              4.25 GB            Page-ins
              454 MB             Page-outs

  • Java 8 not working with Mavericks help

    Updated to Mavericks and went to my dashboard, error screen opens says I need the Java Runtime Environment I installed it (JAVA 8) and it still does not work. Ideas help?

    You need Apple Java 2014-001 or Java SE Runtime Environment 7 1.7.0_67.

Maybe you are looking for