OO4O output cursor just ruturn part of the records

Hi,
I use VB and OO4O to call an oracle stored procedure, but the output ref cursor just return part of the records, for example, I supposed to get 300 records, but it just return first 100 records.
If anyone know what is wrong and how to fix it?
Thanks for any help.
William

To use an external decoder connection, your setting in the DVD player software should be to use SPDIF output, and your speaker setting should be 2 speakers. If you use the multichannel analog inputs also common on receivers, you can actually use more than 2 of your soundcard's channels.
But that's just an attempt to give you some raw material for some insight....
The digital outputs should always be acti've unless you're playing high-resolution DVD-Audio. That does tell us there's some sort of capability for forcing the digital
output off. It may be that it is being turned off when it shouldn't be. It's also
possible that something's changing AC3 bits when this shouldn't happen. All this points to some sort of corruption (a poison pill has found it's way into your registry, perhaps), or to some other misbehaving software (likely a driver if so). Did you install any new devices when you did the XP upgrade? If so, try getting updated drivers for those, first.
Then if that seems to have no effect, try removing and reinstalling the CL software, using "cleansweep" procedures for a more thorough reinstall. Otherwise, I'd start seriously considering starting over with a clean OS reinstall.
-Dave
[email protected]

Similar Messages

  • How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

    how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

    Two ways to print a portion of a page: zooming or using the Snapshot Tool.
    ZOOMING:
    Zoom into the area you want to print.
    Click the Print icon.
    Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
    If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
    SNAPSHOT
    Choose Edit > Take A Snapshot.
    Drag a rectangle around the area you want to print. 
    Click the Print icon.
    Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
    To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
    Hope this helps!

  • I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add info), it overwrites part of the record following it. I am using labview 6.0

    I need to update specific records(of variable lengths) in a file. I can get the correct record but when I update it(add or change info), it overwrites part of the record following it. I am using labview 6.0. I need to be able to insert information into the middle of a file without disturbing the data before and after

    It's hard to give more specifics without more detail, but in general you're going to need to read in the entire file, split it into three pieces (everything before the record of interest, the record itself, and everything after the record of interest), modify the record, reassemble the three pieces in proper order, and write the whole thing back to the file.Of course if the file is very large you might not want to actually implement it this way, but conceptually at least, this is what you are looking at.If this file some sort of proprietary format?Mike...PS: this type of issue is why I really like databases...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Dynamic internal table ( make one internal table parts of the record )

    hello i am doing a program that look for document billing put it in a internal table then loop the internal table and use the FM SD_DOCUMENT_FLOW_GET for get the document flow that fm return a table and i need make every record of that table part of the currect register , i already do this in a ugly static way but i am looking a dynamic way of do this , i know that the ABAP OO is the way but i am no able to get this approarch ( i am noob in abap and any experience with OO programing )
    i will show the code for better understanding of it
    pd: is a crappy code i know sorry
    [CLick Here for the see the Code ( pastebin )|http://linuxlatino.pastebin.com/m39120e69]

    thanks all for the answer , but i will try explain better my problem :
    i have a it_data interntal table with document bill record i do a loop to that table and used the vbeln field in the FM for get the docment flow of that document billing number now the output of the FM is a table and i need take each record of that table am make it part of the current record of it_Data.
    Example:
    it_Data without the it_docflow data
    *Sales ORg*   *Distri.Channel*      *Billing Type*    *Payer*         *Sold-to-party*        vbeln*
    TP01         C1                     ZT17           1000524     1000524                 85003435 ..........
    it_docflow table ( FM Output ):
    *DOCNUM     ITEMNU    DOCNUV    ITEMNU            Description*
    53107842   000000                          000000         Standard Order
    65004606   000000       53107842   000000        Outbound Delivery
    75179356   000000      65004606   000000         Invoice
    57000118   000000      75179356   000000        Returns
    85003435   000000      57000118   000000        Credit for Returns
    5200003681 000000     85003435   000000       Accounting Doc.
    now the it_docflow data add in the it_data record:
    53107842  Standard Order  65004606 Outbound Delivery 75179356  Invoice  57000118 Returns  85003435 Credit for Returns 5200003681 Accounting Doc   TP01         C1                     ZT17           1000524     1000524                 85003435 .........
    i hope this explain better my problem here , thanks again

  • QuickTime 10.0 Screen Recording randomly skips parts of the recording?

    I'm using the QuickTime Player to record some gameplay on my computer and sometimes, randomly, it skips part of the video. Sometimes its just a minute or 2 and sometimes its 15 minutes. I don't know why or how this could possibly happens, but it does. I have 366GB of space on my computer left so space is not an issue. I don't know what is. Please help

    Bump. I'm having this trouble too, on both my iMac and my Macbook. I've tried every combination of events I can think of that might make this happen (switching windows, switching Spaces, etc. etc.), but the problem is so random and intermittent. Sometimes it records fine and I end up with a full recording, sometimes the middle is gone, sometimes just the end. The file size doesn't seem to matter; I have some good recordings that are nearly 500MB, and some that failed when they are only 30MB (and I have well over 300GB free). It's really annoying to not know until you've done 30 minutes of work that the middle is missing from the recording, and have no idea whatsoever even how to work around the issue.

  • HT1491 I have a 23.50 credit in my itunes account.  I am signed in and can listen to the previews of the songs I want to purchase. When I click the buy button nothing happens.  sometimes it just plays part of the song.  It is not downloading onto my compu

    I have a 23.50 credit in my itunes account. I am signed into my account and I can hear the preview to the songs I want to purchase.
    When i click to buy the song nothing happens.  It sometimes just plays the preview again.  Help please.

    Having the same problem and i just thought it was me ? So frustrating went to my local Apple store and they told me to re-load Itunes again,Done that but still can not buy songs???????????

  • Changing the audio output of JUST firefox without changing the OS output

    Basicly i have Virtual audio cable installed and i want to change JUST firefox to play out of the Virtual audio cable ,nothing else

    hello TheNerdMan, i don't think that this is controllable from within firefox at the moment and it rather sounds like a feature that should be implemented on the level of the operating system...

  • Podcast--lowering sound of one part of the recording

    I just taped an interview in garageband. He was on the phone while i was at my mac. I, of course, am too loud. He is ok. How can i lower just my section? I can seem to edit the sound. I can cut it, but not edit it. I gotta be doing something wrong. I watched the podcast tutorial, but it doesn't go over that.

    You can apply a volume curve, as HangTime suggests, to either lower your voice or raise his. Or, alternately, you can make cuts (Splits) and move your parts to a new Track and just set the volume on that. It depends on which you find easier.

  • PE10:How can I limit  a transition to just part of the video

    I want to limit the page peel transition to affect the portion of the video screen that depicts a screen showing a slide presentation. The slide show does not show up on the video, so I have to overlay the screen with images from the slide show & want the transitions to affects just that part of the screen.
    I can’t seem to limit the transition with a matte.

    Great news!
    That is sort of like the workflow in PrPro, where one would create a Sequence (think of a mini-Project, in a Project), then edit with the desired Transition, and then Nest that Sequence into a new one, where the PiP would be created from it. In PrE, there are no Sequences, so no Nesting, but you got around that by editing in a Project, then Exporting/Sharing, to then Import into another Project. More than one way to "skin a cat."
    Steve G. always has some great workflow modifications, to get most things to work in PrE. Those suggestions are always greatly appreciated.
    Good luck,
    Hunt

  • How to I print a center footer which includes the word "Page" as part of the Page # of #?

    I want to print out multiple pages when I go to a specific URL and I want to also print a custom center footer which actually prints out the word Page as part of the Page # of #, normally if you choose the specific Page # of # you only get printed out as an example 1 of 2, it does not cause the word Page to be included in the printout?
    a

    Hi Nes,
    This is the second time you are posting a variation on this question.
    I was about to so NO YOU CAN'T...
    but then I thought...
    It is possible to print just parts of a front panel but it is a lot easier to do the things others have suggested.
    If you really want to print just a part of the FP you will have to do a lot of coding and the GUI will do some strange things in the process.
    I will outline the process and leave the code as an exercise for the reader.
    Using property nodes determine where on the FP the objects of interest are located.
    Again using property nodes, move the objects around on the FP so that they are grouped together and sized such they fit on a printed page.
    Using property nodes adjust the screen size origin etc so only
    the objects of interest are now visable.
    Using.....nodes print only the visable part of the screen.
    Using....nodes put everything back where is was when you started!
    Like I said, this is not easy.
    The simplest solution was suggested by BJD who said group the objects of interest on a tab page, use an invoke node to get the image and then display it on the FP of a sub-VI set to print on completion. That method will let you quickly add new interesting objects to the print out without having to change the sub-VI.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How do I print a part of the front panel?

    I am interested in printing a part of my front panel as one page instead of printing the entire front panel. Does anyone know if this is possible? Thanks!

    Hi Nes,
    This is the second time you are posting a variation on this question.
    I was about to so NO YOU CAN'T...
    but then I thought...
    It is possible to print just parts of a front panel but it is a lot easier to do the things others have suggested.
    If you really want to print just a part of the FP you will have to do a lot of coding and the GUI will do some strange things in the process.
    I will outline the process and leave the code as an exercise for the reader.
    Using property nodes determine where on the FP the objects of interest are located.
    Again using property nodes, move the objects around on the FP so that they are grouped together and sized such they fit on a printed page.
    Using property nodes adjust the screen size origin etc so only
    the objects of interest are now visable.
    Using.....nodes print only the visable part of the screen.
    Using....nodes put everything back where is was when you started!
    Like I said, this is not easy.
    The simplest solution was suggested by BJD who said group the objects of interest on a tab page, use an invoke node to get the image and then display it on the FP of a sub-VI set to print on completion. That method will let you quickly add new interesting objects to the print out without having to change the sub-VI.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Is it possible to export part of the FCPX Project from timeline

    Is it possible to export a selection from the FCPX timeline or do I have to export the entire project and then edit it in another program.

    andynick wrote:
    Goldfish wrote:
    FCP7 was much better for this:
    Yes - but you don't mention the billion ways in which FCP X makes FCP 7 totally obsolete.
    Andy
    I didn't think it was relevant to the thread.
    I'm simply encouraging the return of a few features that were left on the cutting room floor - no harm in that.
    I O markers and chapter markers are a few of them and routinely a topic of discussion. It's not just me.
    For the record I'm a big Fan of FCPX. It has many of the features that I said, for years,  should be added to FCP7 -  and I took a lot of heat over the years for pointing out the deficiencies in FCP7.
    When a new editor comes to the forum and asks "why can't i do this really simple thing" , I think it's better to acknowledge his observation and encourage constructive feedback to Apple rather than implying that he was stupid for knot figuring out a convoluted work-around for something that should exist in the program.
    If your post had started with "here's a work around…." rather than " takes seconds…"
    and you had finished with "…hopefully we'll see I O markers in a future update…"
    Rather than "…Ctrl+Zs to get back to previous state." you never would have heard a peep from me.
    I just find the apologist mentality difficult to ignore. No offense intended.
    best regards,
    g
    PS - I also think "totally obsolete" is a bit of a stretch.

  • I recorded a panel presentation on my Ipod and would like to edit the recording on my itunes so I can export the recording and send it to my colleagues over the internet.  I was able to import the recording to my itunes library but need help editing it.

    Hello, thanks in advance for your help.  I recorded a panel presentation on an ipod and would like to edit the audio recording to just one portion of the recording.  I was able to import the audio into my itunes 11.1.3 music library but I have not been able to edit the length of the recording.  I followed an online tutorial and was able to edit when the recording starts and stops on the recording but I haven't been able to edit out the parts of the recording that I dont want.  Also when I try to export it to my Desktop or to Garageband (not sure if that helps or not) I am not able to export it.  It is currently a .WAV file.  I would like to edit the length of the recording and then export the file onto my desktop.  I would like to email the presentations to my colleagues online so I could also use advice on how to make it a smaller file since it is current 945.6 MB.

    iTunes isn't an editor. You need an app that's intended for editing audio files, like Adobe Audition (http://www.adobe.com/products/audition.html) or Audacity (free in the App Store).

  • How to get the records which has a specified x/y coordinates

    Hi,
    How to get the records which has a specified x/y coordinates. I have a table which has street data. And another table has a point data. Now I just want to get the records from street data which includes the points in the point data table. Can any one give your suggestions
    Thanks and Regards
    Aravindan

    Aravinda,
    If you want to find the line segments which intersect the given
    set of points, you can do that with SDO_RELATE.
    siva

  • Why does SHDB stop the recording when "Save" is done in VA01 ?

    Hi,
    Here is my problem:
    - When I run VA01 manually and save my sales order, the transaction does not exit: I can see the sales order number in the status bar and continue to work in the same screen.
    - When I do the same with transaction SHDB (transaction recorder), VA01 exits just after Save and the recording stops.
    I tried to play with the different options of SHDB but nothing worked so far.
    Does anyone have an explanation, or better, a solution ?
    Thanks in advance !

    Normally, you run your recording in a loop, so you want to exit the transaction when an order is saved so that you can go on with the next one.
    Rob

Maybe you are looking for