Ooo err mmm help?

I hope this makes it on the forum ok
Somethings not right - ALL BTCC forum pages fail to finish loading. As I type page still loading at about 80% - been waiting 15 to 20 mins!!
Partial tracert -
Tracing route to lithium.com [74.53.85.196]
over a maximum of 30 hops:
(1 to 9 removed)
10    17 ms    17 ms    17 ms core2-gig14-0-0.redbus.ukcore.bt.net [62.6.200.97]
11    17 ms     *        *     ge-2-1-0.mpr1.lhr2.uk.above.net [195.66.224.76]
12     *        *        *     Request timed out.
13    96 ms     *       93 ms so-0-1-0.mpr1.dca2.us.above.net [64.125.27.57]
14     *      120 ms     *     xe-0-3-0.cr1.dca2.us.above.net [64.125.29.17]
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17     *        *        *     Request timed out.
18   134 ms   127 ms   127 ms et5-4.ibr04.dllstx3.theplanet.com [70.87.253.53]
19   136 ms   127 ms   128 ms 22.ff.5746.static.theplanet.com [70.87.255.34]
20   130 ms   129 ms   132 ms 42.ff.5746.static.theplanet.com [70.87.255.66]
21   131 ms   131 ms   127 ms te1-1.car05.dllstx6.theplanet.com [70.87.254.170]
22   127 ms   125 ms   126 ms c4.55.354a.static.theplanet.com [74.53.85.196]
Trace complete.
Tracing route to lithium.com [74.53.85.196]
over a maximum of 30 hops:
1 to 9 removed
10    17 ms    19 ms    17 ms core2-gig14-0-0.redbus.ukcore.bt.net [62.6.200.97]
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13     *        *        *     Request timed out.
14     *       91 ms     *     xe-0-3-0.cr1.dca2.us.above.net [64.125.29.17]
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17     *        *        *     Request timed out.
18   129 ms   132 ms   127 ms et5-4.ibr04.dllstx3.theplanet.com [70.87.253.53]
19   127 ms   126 ms   126 ms 22.ff.5746.static.theplanet.com [70.87.255.34]
20   134 ms   128 ms   128 ms 42.ff.5746.static.theplanet.com [70.87.255.66]
21   142 ms   129 ms   130 ms te1-1.car05.dllstx6.theplanet.com [70.87.254.170]
22   127 ms   126 ms   128 ms c4.55.354a.static.theplanet.com [74.53.85.196]
Trace complete.
Not just here
Tracing route to google.co.uk [173.194.37.104]
over a maximum of 30 hops:
1 to 9 removed
10    20 ms    21 ms    19 ms core4te-0-3-0-0.telehouse.ukcore.bt.net [62.172.102.17]
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *       19 ms lhr14s02-in-f104.1e100.net [173.194.37.104]
Trace complete.
I'm outta here                                                                                                             (till it's sorted)
-+-No longer a forum member-+-
Solved!
Go to Solution.

It was BT's DNS Servers. Anything to do with Google was not resolving. They are all working properly again now - See if it loads for you
Cheers
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

Similar Messages

Err = 9006 help me

Hello, I have a problem downloading a podcast episode this showing "err = 9006 and can not complete the download, try to download other episodes already and always the same thing ever happens. How to solve this problem? Help me please! I use iTunes 9.2

The steps outlined here worked perfectly for my err = 9006 issue:
http://support.apple.com/kb/TS2384
Mike

ERR 1009 help!

Running a Mac. Updated to Muse CC (2014.2) about a week ago. Started getting Err. 1009 when I tried to change or edit text objects and pull things from the widgets panel. Recreated the error making a new site and the same thing happened when I tried to insert text on the same version of Muse. Also tried uninstalling Muse CC 2014.2 and reinstalling. Didn't work. The site I need fixed is very large and I'm on a tight deadline. There's no way I can start from scratch. HELP!
Update: After messing around with the assets panel (embedding links) I can now edit text and insert images without the #1009 error popping up. But as soon as I try to click and drag something, anything on the page or from the library and assets panels, I get the error and Muse crashes. Maybe a bug in the drag event handler in the newest version of Muse?
Message was edited by: Ashley Davis

Hi Oranis
Please send us the file at [email protected] along with a link to this thread. If the file is larger than 20Mb, you can use a service like Adobe SendNow, SendThisFile or WeTransfer.

Received notice from Apple to upgrade iTunes on my Dell PC running windows 7 Ultra. Update failed numerous times with error message R6034 Microsoft visual C error. Apple instructions to remove itunes and reinstall. Reinstall failed (same Err). HELP!

Received notice from Apple to upgrade iTunes with 11.1.4 on my Dell PC running Win 7 Ultra.During upgrade got error message R6034 several tries (app's attempt to load C runtime library incorrectly in Visual C + + runtime library). Apple's suggestion to uninstall iTunes and reinstall with ver. 11.1.4. Tried that, it failed too. Now have no iTunes, think I have lost all saved podcasts and music, and get no help from Apple. What to do?

Try this: Troubleshooting issues with iTunes for Windows updates.
tt2

Ooo err. QoS nose dived. Anyone else?

Is there a problem with the QoS atm?
This Test comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
5427 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 5427 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7150 Kb
2. Assured Rate Test: -provides background information.
Download Speed
568 Kbps
0 Kbps
600 Kbps
Max Achievable Speed
Download speedachieved during the test was - 568 Kbps
For your connection, the acceptable range of speeds is 576-600 Kbps.
Additional Information:
Assured Rate IP profile on your line is - 600 Kbp
This test was not conclusive and further testing is required.This might be useful for your ISP to investigate the fault.
The QoS has been in the region of 5000 Kbps for some time now.....
-+-No longer a forum member-+-

(would of replied last night, but the waiting for the page took too long)
Hi Guilbo and thanks for the reply
Good point, they may of finally got their 'ears' in gear and sorted it out.
I too have been having QoS results that exceed the max of 600 Kbps and 1600 Kbps (the latter, as you know, when VOD has been watched).
Last night (after you posted), the speedtest results after watching a Vision help video was in the 4200 Kbps region.Will the upper limit be tweaked to represent the higher result or will the speedtest start to max out at 1600 Kbps? I guess only time will tell.....
Today with no VOD being watched, the result is 618 Kbps, so slightly over the 600 Kbps acceptable range.
So for now, all seems well.....
-+-No longer a forum member-+-

Err = -100000 Help

I purchased an Album and Track 01 throws off the error (err= -100000), despite the fact that I can download podcasts as well as the other 20 songs on the album. What gives? I know for a fact that I am behind a firewall and an additional level of security, neither of which I can tamper with.

Could be the security that's causing the error.
Try disabling a/v software and turn off the Firewall.
Disable antivirus software
Turn Windows Firewall on or off
iTunes: Specific update-and-restore error messages and advanced troubleshooting

Type err, need help!!

Hi all,
in html I have
<option value="MySec">2000</option> and MYSec is a table in my database.
in servlet
I have stmt.executeUpdate("insert into "+ year +"("
                            + "Name, Segment, Sequence, length,SubType,location, SampleYear, author)"
                            + "VALUES('"
                            + Name + "','"
                            + Segment+ "','"
                            + word + "','"
                            + Length + "','"
                            + subType + "','"
                            + location + "','"
                            + year+ "','"
                            + author + "'"
                            + ")");and I got error
SQLServer]Syntax error converting the varchar value 'MySec' to a column of data type int. at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
I have not ideal what mistake I make , can any one help!!

<option value="MySec">2000</option>
When a user selects this option, it sends the String 'MySec' as the value of the select input.
You get this value, assign it so some variable (which one, I haven't a clue). When you try to assign that value to the database, the db is expecting an integer (numbers). But you are giving it characters ('MySec').
To fix it:
1) define the column that takes that value to use varchar instead of int datatype if you REALLY want to save the string 'MySec' in the database.
2) Use
<option value="2000">2000</option>
as the option, so a number gets assigned to the selected value instead of a string, if what you really want to save is a number.

Want help to execute the programm of MethodEntryEvent

Hi,
I am trying to develop a programm for automatic logging in the programme. I took the hepl of java API and the Google site for searching some programms and successed also. but while running these sample programms i am getting classNotFound exception and some other exceptions also. i executed the programm Seq.java downloaded from the site http://search.cpan.org/src/PHILCROW/UML-Sequence-0.05/java/Seq.java. i am not able to understand how to execute it. what ever i tried its giving the same output whatever defined in the System.err() in the file. but it should display the corrosponding class details for which i need to see the output.
can anyone help me in this regard and tell me the process to execute the programm.
i took another e.g. trace example, which (in J2SE 1.4.x or 5.x) will be found in $JAVA_HOME/demo/jpda/examples.jar and unpacking it by
jar -xvf $JAVA_HOME/demo/jpda/examples.jar i found the
com/sun/tools/example/trace/Trace.java
when i tried to execute it to see the output for some other programm i got the following exceptions,
-- VM Started --
====== main ======
main -- DateExample
| Exception: instance of java.lang.ClassNotFoundException(id=97) catch: java.lang.ClassLoader:286
| | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=98) catch: java.lang.ClassLoader:286
| | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=98) catch: java.lang.ClassLoader:286
| | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=99) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=99) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=100) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=100) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=101) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=101) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=102) catch: java.util.ResourceBundle:1074
| | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=102) catch: java.util.ResourceBundle:1074
| | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=105) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=105) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=106) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=106) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=115) catch: null
| | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=118) catch: null
====== main end ======
-- The application exited --
i execute this programm i used the command as
java Trace -output trace.log DateExample
where trace.log is output file and DateExample is the java file.
Can any one help me in this regard to execute the programms and can give me a detailed solution procedure.
can anyone suggest me any other programm for auto exit and entry display for classes or methods with detailed execution steps.
Thanks,

Hi,
i tried by setting the class path in the environment variables.
still i am getting the same exceptions. i m sending the files on which i m working and requesting to give some solution. the files are
// Trace.java
import com.sun.jdi.VirtualMachine;
import com.sun.jdi.Bootstrap;
import com.sun.jdi.connect.*;
import java.util.Map;
import java.util.List;
import java.util.Iterator;
import java.io.PrintWriter;
import java.io.FileWriter;
import java.io.IOException;
* This program traces the execution of another program.
* See "java Trace -help".
* It is a simple example of the use of the Java Debug Interface.
* @version @(#) Trace.java 1.4 03/01/23 17:55:38
* @author Robert Field
public class Trace {
// Running remote VM
private final VirtualMachine vm;
// Thread transferring remote error stream to our error stream
private Thread errThread = null;
// Thread transferring remote output stream to our output stream
private Thread outThread = null;
// Mode for tracing the Trace program (default= 0 off)
private int debugTraceMode = 0;
// Do we want to watch assignments to fields
private boolean watchFields = false;
// Class patterns for which we don't want events
private String[] excludes = {"java.*", "javax.*", "sun.*",
"com.sun.*"};
* main
public static void main(String[] args) {
//new Trace(args);
//DateExample d = new DateExample();
//String[] arg = {(new DateExample().toString())};
//String[] arg = {"E:/java_progs/classLoader/project logging/com/sun/tools/example/trace/DateExample.java"};
//d.dateDisplay();
new Trace(args);
* Parse the command line arguments.
* Launch target VM.
* Generate the trace.
Trace(String[] args) {
System.out.println("entered into the method Trace(String[] args)");
PrintWriter writer = new PrintWriter(System.out);
System.out.println("Printer object created.....");
int inx;
for (inx = 0; inx < args.length; ++inx) {
System.out.println("inside for loop args.length is "+args.length+" and the data is "+args[inx]);
String arg = args[inx];
if (arg.charAt(0) != '-') {
break;
if (arg.equals("-output")) {
System.out.println("inside args== -output");
try {
writer = new PrintWriter(new FileWriter(args[++inx]));
System.out.println("writer object createed....");
} catch (IOException exc) {
System.err.println("Cannot open output file: " + args[inx]
+ " - " + exc);
System.exit(1);
} else if (arg.equals("-all")) {
System.out.println("inside args== -all");
excludes = new String[0];
} else if (arg.equals("-fields")) {
System.out.println("inside args== -fields");
watchFields = true;
} else if (arg.equals("-dbgtrace")) {
System.out.println("inside args== -bdgtrace");
debugTraceMode = Integer.parseInt(args[++inx]);
System.out.println("inside args== -bdgtrace the debugTraceMode is "+debugTraceMode);
} else if (arg.equals("-help")) {
System.out.println("inside args== -help called usage();");
usage();
System.exit(0);
} else {
System.err.println("No option: " + arg);
usage();
System.exit(1);
System.out.println("the index is "+inx+" the args.length is "+args.length);
if (inx >= args.length) {
System.err.println("<class> missing");
usage();
System.exit(1);
StringBuffer sb = new StringBuffer();
sb.append(args[inx]);
for (++inx; inx < args.length; ++inx) {
sb.append(' ');
sb.append(args[inx]);
System.out.println("the string buffer contains \n "+sb);
vm = launchTarget(sb.toString());
generateTrace(writer);
System.out.println("after generateTrace(writer)");
* Generate the trace.
* Enable events, start thread to display events,
* start threads to forward remote error and output streams,
* resume the remote VM, wait for the final event, and shutdown.
void generateTrace(PrintWriter writer) {
System.out.println("inside generateTrace(PrintWriter writer) the debugTraceMode is "+debugTraceMode);
vm.setDebugTraceMode(debugTraceMode);
EventThread eventThread = new EventThread(vm, excludes, writer);
eventThread.setEventRequests(watchFields);
System.out.println("inside generateTrace(PrintWriter writer) the eventThread.setEventRequests(watchFields) is ");
eventThread.start();
redirectOutput();
vm.resume();
// Shutdown begins when event thread terminates
try {
eventThread.join();
errThread.join(); // Make sure output is forwarded
outThread.join(); // before we exit
} catch (InterruptedException exc) {
// we don't interrupt
writer.close();
System.out.println("the writer is closed....");
* Launch target VM.
* Forward target's output and error.
VirtualMachine launchTarget(String mainArgs) {
System.out.println("inside VirtualMachine launchTarget(String mainArgs) "+mainArgs);
LaunchingConnector connector = findLaunchingConnector();
System.out.println("Lunching connector found "+connector);
Map arguments = connectorArguments(connector, mainArgs);
try {
return connector.launch(arguments);
} catch (IOException exc) {
throw new Error("Unable to launch target VM: " + exc);
} catch (IllegalConnectorArgumentsException exc) {
throw new Error("Internal error: " + exc);
} catch (VMStartException exc) {
throw new Error("Target VM failed to initialize: " +
exc.getMessage());
void redirectOutput() {
Process process = vm.process();
System.out.println("inside redirectOutput() after getting the virtual m/c process");
// Copy target's output and error to our output and error.
errThread = new StreamRedirectThread("error reader",
process.getErrorStream(),
System.err);
outThread = new StreamRedirectThread("output reader",
process.getInputStream(),
System.out);
errThread.start();
outThread.start();
* Find a com.sun.jdi.CommandLineLaunch connector
LaunchingConnector findLaunchingConnector() {
List connectors = Bootstrap.virtualMachineManager().allConnectors();
System.out.println("inside redirectOutput() after getting the connectors list");
Iterator iter = connectors.iterator();
while (iter.hasNext()) {
Connector connector = (Connector)iter.next();
System.out.println("inside while (iter.hasNext()) after getting the connector objects from itterator");
if (connector.name().equals("com.sun.jdi.CommandLineLaunch")) {
System.out.println("inside if (connector.name().equals('com.sun.jdi.CommandLineLaunch'))");
return (LaunchingConnector)connector;
throw new Error("No launching connector");
* Return the launching connector's arguments.
Map connectorArguments(LaunchingConnector connector, String mainArgs) {
System.out.println("Map connectorArguments(LaunchingConnector connector, String mainArgs) the mainArgs is "+mainArgs);
Map arguments = connector.defaultArguments();
Connector.Argument mainArg =
(Connector.Argument)arguments.get("main");
if (mainArg == null) {
System.out.println("inside the mainArg==null ");
throw new Error("Bad launching connector");
mainArg.setValue(mainArgs);
System.out.println("the mainArg is "+mainArg);
if (watchFields) {
System.out.println("inside the if (watchFields)********");
// We need a VM that supports watchpoints
Connector.Argument optionArg =
(Connector.Argument)arguments.get("options");
if (optionArg == null) {
throw new Error("Bad launching connector");
System.out.println("inside the if (watchFields)the optionArg is "+optionArg);
optionArg.setValue("-classic");
System.out.println("optionArg.getValue() is ");
return arguments;
* Print command line usage help
void usage() {
System.out.println("inside usage()");
System.err.println("Usage: java Trace <options> <class> <args>");
System.err.println("<options> are:");
System.err.println(
" -output <filename> Output trace to <filename>");
System.err.println(
" -all Include system classes in output");
System.err.println(
" -help Print this help message");
System.err.println("<class> is the program to trace");
System.err.println("<args> are the arguments to <class>");
// DateExample.java
import java.util.Date;
import java.text.DateFormat;
import java.util.Calendar;
import java.text.ParseException;
import java.text.SimpleDateFormat;
public class DateExample {
public static void main(String[] args) {
Date a = new Date();
System.out.println("Today is : "+a);
Calendar ca= Calendar.getInstance();
ca.set(a.getYear(),a.getMonth(),a.getDate());
ca.add(Calendar.DATE,1);
DateFormat df1 = DateFormat.getDateInstance(DateFormat.SHORT);
String s1 = df1.format(ca.getTime());
System.out.println("(SHORT) Today is + 1 :" + s1);
//java.sql.Date s = new java.sql.Date(2005,6,1);
//System.out.println("Date from sql is : "+s);
Date a1 = new Date(2005,06,01);
System.out.println("Today is a1 : "+a1);
java.text.SimpleDateFormat formatter = new java.text.SimpleDateFormat("MM-dd-yyyy HH:mm:ss");
System.out.println("After format :"+formatter.format(a1));
System.out.println("After format :"+formatter.format(new Date(s1)));
java.text.SimpleDateFormat formatter1 = new java.text.SimpleDateFormat("MM/dd/yyyy HH:mm:ss");
System.out.println("After format :"+formatter1.format(a1));
// EventThread.java
import com.sun.jdi.*;
import com.sun.jdi.request.*;
import com.sun.jdi.event.*;
import java.util.*;
import java.io.PrintWriter;
* This class processes incoming JDI events and displays them
* @version @(#) EventThread.java 1.4 03/01/23 17:55:38
* @author Robert Field
public class EventThread extends Thread {
private final VirtualMachine vm; // Running VM
private final String[] excludes; // Packages to exclude
private final PrintWriter writer; // Where output goes
static String nextBaseIndent = ""; // Starting indent for next thread
private boolean connected = true; // Connected to VM
private boolean vmDied = true; // VMDeath occurred
// Maps ThreadReference to ThreadTrace instances
private Map traceMap = new HashMap();
EventThread(VirtualMachine vm, String[] excludes, PrintWriter writer) {
super("event-handler");
this.vm = vm;
this.excludes = excludes;
this.writer = writer;
System.out.println("inside EventThread(VirtualMachine vm, String[] excludes, PrintWriter writer) ");
* Run the event handling thread.
* As long as we are connected, get event sets off
* the queue and dispatch the events within them.
public void run() {
System.out.println("inside run() ");
EventQueue queue = vm.eventQueue();
while (connected) {
System.out.println("inside while (connected) ");
try {
EventSet eventSet = queue.remove();
EventIterator it = eventSet.eventIterator();
System.out.println("got EventSet and EventIterator *** ");
while (it.hasNext()) {
System.out.println("inside while (it.hasNext())");
handleEvent(it.nextEvent());
eventSet.resume();
System.out.println("event is resumed ***** ");
} catch (InterruptedException exc) {
// Ignore
} catch (VMDisconnectedException discExc) {
handleDisconnectedException();
break;
* Create the desired event requests, and enable
* them so that we will get events.
* @param excludes Class patterns for which we don't want events
* @param watchFields Do we want to watch assignments to fields
void setEventRequests(boolean watchFields) {
System.out.println("inside setEventRequests(boolean watchFields) ");
EventRequestManager mgr = vm.eventRequestManager();
// want all exceptions
ExceptionRequest excReq = mgr.createExceptionRequest(null,
true, true);
// suspend so we can step
excReq.setSuspendPolicy(EventRequest.SUSPEND_ALL);
excReq.enable();
MethodEntryRequest menr = mgr.createMethodEntryRequest();
for (int i=0; i<excludes.length; ++i) {
System.out.println("inside for (int i=0; i><excludes.length; ++i) for createMethodEntryRequest() ");
menr.addClassExclusionFilter(excludes);
menr.setSuspendPolicy(EventRequest.SUSPEND_NONE);
menr.enable();
MethodExitRequest mexr = mgr.createMethodExitRequest();
for (int i=0; i><excludes.length; ++i) {
System.out.println("inside for (int i=0; i><excludes.length; ++i) for createMethodExitRequest() ");
mexr.addClassExclusionFilter(excludes);
mexr.setSuspendPolicy(EventRequest.SUSPEND_NONE);
mexr.enable();
ThreadDeathRequest tdr = mgr.createThreadDeathRequest();
// Make sure we sync on thread death
tdr.setSuspendPolicy(EventRequest.SUSPEND_ALL);
tdr.enable();
if (watchFields) {
System.out.println("inside if (watchFields) ************** ");
ClassPrepareRequest cpr = mgr.createClassPrepareRequest();
for (int i=0; i><excludes.length; ++i) {
System.out.println("inside for (int i=0; i><excludes.length; ++i) the excludes.length is ************** "+excludes.length);
cpr.addClassExclusionFilter(excludes);
cpr.setSuspendPolicy(EventRequest.SUSPEND_ALL);
cpr.enable();
* This class keeps context on events in one thread.
* In this implementation, context is the indentation prefix.
class ThreadTrace {
final ThreadReference thread;
final String baseIndent;
static final String threadDelta = " ";
StringBuffer indent;
ThreadTrace(ThreadReference thread) {
System.out.println("inside ThreadTrace(ThreadReference thread)");
this.thread = thread;
this.baseIndent = nextBaseIndent;
indent = new StringBuffer(baseIndent);
nextBaseIndent += threadDelta;
println("====== " + thread.name() + " ======");
private void println(String str) {
System.out.println("inside void println(String str)");
writer.print(indent);
writer.println(str);
void methodEntryEvent(MethodEntryEvent event) {
System.out.println("inside methodEntryEvent(MethodEntryEvent event)");
println(event.method().name() + " -- "
+ event.method().declaringType().name());
indent.append("| ");
void methodExitEvent(MethodExitEvent event) {
System.out.println("inside methodExitEvent(MethodExitEvent event)");
indent.setLength(indent.length()-2);
void fieldWatchEvent(ModificationWatchpointEvent event) {
System.out.println("inside fieldWatchEvent(ModificationWatchpointEvent event)");
Field field = event.field();
Value value = event.valueToBe();
println(" " + field.name() + " = " + value);
void exceptionEvent(ExceptionEvent event) {
System.out.println("inside exceptionEvent(ExceptionEvent event) ");
println("Exception: " + event.exception() +
" catch: " + event.catchLocation());
// Step to the catch
EventRequestManager mgr = vm.eventRequestManager();
StepRequest req = mgr.createStepRequest(thread,
StepRequest.STEP_MIN,
StepRequest.STEP_INTO);
System.out.println("stepRequest is created "+req);
req.addCountFilter(1); // next step only
req.setSuspendPolicy(EventRequest.SUSPEND_ALL);
req.enable();
// Step to exception catch
void stepEvent(StepEvent event) {
System.out.println("inside stepEvent(StepEvent event) ");
// Adjust call depth
int cnt = 0;
indent = new StringBuffer(baseIndent);
try {
cnt = thread.frameCount();
System.out.println("inside try cnt is "+cnt);
} catch (IncompatibleThreadStateException exc) {
while (cnt-- > 0) {
System.out.println("inside while indent is "+indent);
indent.append("| ");
EventRequestManager mgr = vm.eventRequestManager();
mgr.deleteEventRequest(event.request());
void threadDeathEvent(ThreadDeathEvent event) {
System.out.println("inside threadDeathEvent(ThreadDeathEvent event) ");
indent = new StringBuffer(baseIndent);
println("====== " + thread.name() + " end ======");
* Returns the ThreadTrace instance for the specified thread,
* creating one if needed.
ThreadTrace threadTrace(ThreadReference thread) {
ThreadTrace trace = (ThreadTrace)traceMap.get(thread);
System.out.println("inside ThreadTrace threadTrace(ThreadReference thread) trace is "+trace);
if (trace == null) {
trace = new ThreadTrace(thread);
traceMap.put(thread, trace);
return trace;
* Dispatch incoming events
private void handleEvent(Event event) {
System.out.println("inside handleEvent(Event event) ");
if (event instanceof ExceptionEvent) {
System.out.println("inside handleEvent(Event event) in ExceptionEvent ");
exceptionEvent((ExceptionEvent)event);
} else if (event instanceof ModificationWatchpointEvent) {
System.out.println("inside handleEvent(Event event) in ModificationWatchpointEvent ");
fieldWatchEvent((ModificationWatchpointEvent)event);
} else if (event instanceof MethodEntryEvent) {
System.out.println("inside handleEvent(Event event) in MethodEntryEvent ");
methodEntryEvent((MethodEntryEvent)event);
} else if (event instanceof MethodExitEvent) {
System.out.println("inside handleEvent(Event event) in MethodExitEvent ");
methodExitEvent((MethodExitEvent)event);
} else if (event instanceof StepEvent) {
System.out.println("inside handleEvent(Event event) in StepEvent ");
stepEvent((StepEvent)event);
} else if (event instanceof ThreadDeathEvent) {
System.out.println("inside handleEvent(Event event) in ThreadDeathEvent ");
threadDeathEvent((ThreadDeathEvent)event);
} else if (event instanceof ClassPrepareEvent) {
System.out.println("inside handleEvent(Event event) in ClassPrepareEvent ");
classPrepareEvent((ClassPrepareEvent)event);
} else if (event instanceof VMStartEvent) {
System.out.println("inside handleEvent(Event event) in VMStartEvent ");
vmStartEvent((VMStartEvent)event);
} else if (event instanceof VMDeathEvent) {
System.out.println("inside handleEvent(Event event) in VMDeathEvent ");
vmDeathEvent((VMDeathEvent)event);
} else if (event instanceof VMDisconnectEvent) {
System.out.println("inside handleEvent(Event event) in VMDisconnectEvent ");
vmDisconnectEvent((VMDisconnectEvent)event);
} else {
System.out.println("inside handleEvent(Event event) in else unexcepted type ");
throw new Error("Unexpected event type");
* A VMDisconnectedException has happened while dealing with
* another event. We need to flush the event queue, dealing only
* with exit events (VMDeath, VMDisconnect) so that we terminate
* correctly.
synchronized void handleDisconnectedException() {
System.out.println("inside handleDisconnectedException() ");
EventQueue queue = vm.eventQueue();
while (connected) {
System.out.println("inside handleDisconnectedException() in while (connected) ");
try {
EventSet eventSet = queue.remove();
EventIterator iter = eventSet.eventIterator();
System.out.println("inside handleDisconnectedException() got EventSet & EventIterator ");
while (iter.hasNext()) {
System.out.println("inside handleDisconnectedException() in while (iter.hasNext()) ");
Event event = iter.nextEvent();
if (event instanceof VMDeathEvent) {
System.out.println("inside handleDisconnectedException() in if ");
vmDeathEvent((VMDeathEvent)event);
} else if (event instanceof VMDisconnectEvent) {
System.out.println("inside handleDisconnectedException() in else ");
vmDisconnectEvent((VMDisconnectEvent)event);
eventSet.resume(); // Resume the VM
} catch (InterruptedException exc) {
// ignore
private void vmStartEvent(VMStartEvent event) {
System.out.println("inside vmStartEvent(VMStartEvent event)**** ");
writer.println("-- VM Started --");
// Forward event for thread specific processing
private void methodEntryEvent(MethodEntryEvent event) {
System.out.println("inside methodEntryEvent(MethodEntryEvent event)****** ");
threadTrace(event.thread()).methodEntryEvent(event);
// Forward event for thread specific processing
private void methodExitEvent(MethodExitEvent event) {
System.out.println("inside methodExitEvent(MethodExitEvent event)****** ");
threadTrace(event.thread()).methodExitEvent(event);
// Forward event for thread specific processing
private void stepEvent(StepEvent event) {
System.out.println("inside stepEvent(StepEvent event)****** ");
threadTrace(event.thread()).stepEvent(event);
// Forward event for thread specific processing
private void fieldWatchEvent(ModificationWatchpointEvent event) {
System.out.println("inside fieldWatchEvent(ModificationWatchpointEvent event)***** ");
threadTrace(event.thread()).fieldWatchEvent(event);
void threadDeathEvent(ThreadDeathEvent event) {
System.out.println("inside threadDeathEvent(ThreadDeathEvent event)****** ");
ThreadTrace trace = (ThreadTrace)traceMap.get(event.thread());
if (trace != null) { // only want threads we care about
trace.threadDeathEvent(event); // Forward event
* A new class has been loaded.
* Set watchpoints on each of its fields
private void classPrepareEvent(ClassPrepareEvent event) {
System.out.println("inside classPrepareEvent(ClassPrepareEvent event)****** ");
EventRequestManager mgr = vm.eventRequestManager();
List fields = event.referenceType().visibleFields();
for (Iterator it = fields.iterator(); it.hasNext(); ) {
System.out.println("inside classPrepareEvent(ClassPrepareEvent event) inside for loop Iterator ****** ");
Field field = (Field)it.next();
ModificationWatchpointRequest req =
mgr.createModificationWatchpointRequest(field);
for (int i=0; i<excludes.length; ++i) {
System.out.println("inside classPrepareEvent(ClassPrepareEvent event) inside for loop int ****** ");
req.addClassExclusionFilter(excludes);
req.setSuspendPolicy(EventRequest.SUSPEND_NONE);
req.enable();
private void exceptionEvent(ExceptionEvent event) {
System.out.println("inside exceptionEvent(ExceptionEvent event)****** ");
ThreadTrace trace = (ThreadTrace)traceMap.get(event.thread());
if (trace != null) { // only want threads we care about
trace.exceptionEvent(event); // Forward event
public void vmDeathEvent(VMDeathEvent event) {
System.out.println("inside vmDeathEvent(VMDeathEvent event)****** ");
vmDied = true;
writer.println("-- The application exited --");
public void vmDisconnectEvent(VMDisconnectEvent event) {
System.out.println("inside vmDisconnectEvent(VMDisconnectEvent event)****** ");
connected = false;
if (!vmDied) {
System.out.println("inside vmDisconnectEvent(VMDisconnectEvent event)in if loop ****** ");
writer.println("-- The application has been disconnected --");
// StreamRedirectThread.java
import java.io.*;
* StreamRedirectThread is a thread which copies it's input to
* it's output and terminates when it completes.
* @version @(#) StreamRedirectThread.java 1.4 03/01/23 17:55:38
* @author Robert Field
class StreamRedirectThread extends Thread {
private final Reader in;
private final Writer out;
private static final int BUFFER_SIZE = 2048;
* Set up for copy.
* @param name Name of the thread
* @param in Stream to copy from
* @param out Stream to copy to
StreamRedirectThread(String name, InputStream in, OutputStream out) {
super(name);
this.in = new InputStreamReader(in);
this.out = new OutputStreamWriter(out);
setPriority(Thread.MAX_PRIORITY-1);
System.out.println("inside StreamRedirectThread(String name, InputStream in, OutputStream out) ****** ");
* Copy.
public void run() {
System.out.println("inside StreamRedirectThread class in run() ****** ");
try {
char[] cbuf = new char[BUFFER_SIZE];
int count;
while ((count = in.read(cbuf, 0, BUFFER_SIZE)) >= 0) {
System.out.println("inside run() in while loop the count is ****** "+count);
out.write(cbuf, 0, count);
out.flush();
} catch(IOException exc) {
System.err.println("Child I/O Transfer - " + exc);
by using these files i m trying to trace the execution of DateExample.java through the Trace.java by using the command
java Trace -output trace.log DateExample
by executiing i m getting the exceptions in the output file trace.log
-- VM Started --
====== main ======
main -- DateExample
| Exception: instance of java.lang.ClassNotFoundException(id=97) catch: java.lang.ClassLoader:286
| | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=99) catch: java.lang.ClassLoader:286
| | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=99) catch: java.lang.ClassLoader:286
| | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=100) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=100) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=101) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=101) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=102) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=102) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.util.zip.ZipException(id=104) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.util.zip.ZipException(id=104) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=105) catch: java.util.ResourceBundle:1074
| | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.lang.ClassNotFoundException(id=105) catch: java.util.ResourceBundle:1074
| | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=108) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=108) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=109) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=109) catch: sun.misc.URLClassPath:293
| | | | | | | | | | | | | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=118) catch: null
| | | | | | | | | | | | | | Exception: instance of java.io.FileNotFoundException(id=121) catch: null
====== main end ======
-- The application exited --
Could any one help me in this regard to execute the programm.
Could any one help to show the execution of the Seq.java downloaded from the site http://search.cpan.org/src/PHILCROW/UML-Sequence-0.05/java/Seq.java, what i mentioned in my previous mail.
thanks,

PL/SQL REFCURSOR ERR

CREATE OR REPLACE PACKAGE QUERIESLOOKUP_PKG
AS
TYPE PKG_REC_TYPE IS RECORD(
OP_DATE          DATE);
TYPE pkgrec IS REF CURSOR RETURN pkg_rec_type;
END QUERIESLOOKUP_PKG;
CREATE OR REPLACE PROCEDURE QUERIESLOOKUP_PRC(
outrec      OUT      QUERIESLOOKUP_PKG.PKGREC) AS
querystr1           varchar2(4000);
BEGIN
querystr1:='select SYSDATE FROM DUAL';
EXECUTE IMMEDIATE querystr1 INTO OUTREC;
END QUERIESLOOKUP_PRC;
SET SERVEROUTPUT ON
declare
REC1      QUERIESLOOKUP_Pkg.pkgrec;
TEST REC1%ROWTYPE;
begin
QUERIESLOOKUP_PRC(REC1);
LOOP
FETCH REC1 INTO TEST;
EXIT WHEN REC1%NOTFOUND;
DBMS_OUTPUT.PUT_LINE('======' );
DBMS_OUTPUT.PUT_LINE(TEST.OP_DATE );
END LOOP;
CLOSE rec1;
END;
declare
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected NUMBER got DATE
ORA-06512: at "QUERIESLOOKUP_PRC", line 9
ORA-06512: at line 6
Hi,
I'm getting this err plz help me!
Thomas

The problem is ref cursor cannot be dynamic.Come again??
SQL> CREATE OR REPLACE FUNCTION dynamic_refcurs
2      (    rpt IN NUMBER := 0)
3      RETURN sys_refcursor
4 AS
5      querystr1 varchar2(4000);
6      q sys_refcursor;
7 BEGIN
8      IF rpt           = 0 THEN
9          querystr1:='select sysdate from dual';
10      ELSIF rpt           = 1 THEN
11          querystr1:='select sysdate from dual union select sysdate+1 from dual';
12      ELSE
13          querystr1:='select sysdate from dual union select sysdate+1 from dual union select sysd
ate+2 from dual';
14      END IF;
15      OPEN q FOR querystr1;
16      RETURN q;
17 END dynamic_refcurs;
18 /
Function created.
SQL>
SQL> SELECT dynamic_refcurs(1) FROM dual
2 /
DYNAMIC_REFCURS(1)
CURSOR STATEMENT : 1
CURSOR STATEMENT : 1
SYSDATE
08-NOV-04
09-NOV-04
SQL> SELECT dynamic_refcurs(2) FROM dual
2 /
DYNAMIC_REFCURS(2)
CURSOR STATEMENT : 1
CURSOR STATEMENT : 1
SYSDATE
08-NOV-04
09-NOV-04
10-NOV-04
SQL> CREATE OR REPLACE FUNCTION dynamic_refcurs
2      (    incr IN NUMBER := 0)
3      RETURN sys_refcursor
4 AS
5      querystr1 varchar2(4000);
6      q sys_refcursor;
7 BEGIN
8      querystr1:='select sysdate + :1 from dual';
9      OPEN q FOR querystr1 USING incr;
10      RETURN q;
11 END dynamic_refcurs;
12 /
Function created.
SQL> SELECT dynamic_refcurs(1) FROM dual
2 /
DYNAMIC_REFCURS(1)
CURSOR STATEMENT : 1
CURSOR STATEMENT : 1
SYSDATE+:
09-NOV-04
SQL> SELECT dynamic_refcurs(2) FROM dual
2 /
DYNAMIC_REFCURS(2)
CURSOR STATEMENT : 1
CURSOR STATEMENT : 1How much more dynamism do you require?
Cheers, APC

Strange behaviour of Runtime.getRuntime().exec(command)

hello guys,
i wrote a program which executes some commands in commandline (actually tried multiple stuff.)
what did i try?
open "cmd.exe" manually (administrator)
type "echo %PROCESSOR_ARCHITECTURE%" and hit enter, which returns me
"AMD64"
type "java -version" and hit enter, which returns me:
"java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
type "reg query "HKLM\SOFTWARE\7-zip"" returns me:
HKEY_LOCAL_MACHINE\SOFTWARE\7-zip
Path REG_SZ C:\Program Files\7-Zip\
i wrote two functions to execute an command
1) simply calls exec and reads errin and stdout from the process started:
public static String execute(String command) {
          String result = "";
          try {
               // Execute a command
               Process child = Runtime.getRuntime().exec(command);
               // Read from an input stream
               InputStream in = child.getInputStream();
               int c;
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
               in = child.getErrorStream();
               while ((c = in.read()) != -1) {
                    result += ((char) c);
               in.close();
          } catch (IOException e) {
          return result;
     }the second function allows me to send multiple commands to the cmd
public static String exec(String[] commands) {
          String line;
          String result = "";
          OutputStream stdin = null;
          InputStream stderr = null;
          InputStream stdout = null;
          // launch EXE and grab stdin/stdout and stderr
          try {
               Process process;
               process = Runtime.getRuntime().exec("cmd.exe");
               stdin = process.getOutputStream();
               stderr = process.getErrorStream();
               stdout = process.getInputStream();
               // "write" the parms into stdin
               for (int i = 0; i < commands.length; i++) {
                    line = commands[i] + "\n";
                    stdin.write(line.getBytes());
                    stdin.flush();
               stdin.close();
               // clean up if any output in stdout
               BufferedReader brCleanUp = new BufferedReader(
                         new InputStreamReader(stdout));
               while ((line = brCleanUp.readLine()) != null) {
                    result += line + "\n";
               brCleanUp.close();
               // clean up if any output in stderr
               brCleanUp = new BufferedReader(new InputStreamReader(stderr));
               while ((line = brCleanUp.readLine()) != null) {
                    result += "ERR: " + line + "\n";
               brCleanUp.close();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          return result;
     }so i try to execute the commands from above (yes, i am using \\ and \" in java)
(1) "echo %PROCESSOR_ARCHITECTURE%"
(2) "java -version"
(3) "reg query "HKLM\SOFTWARE\7-zip""
the first function returns me (note that ALL results are different from the stuff above!):
(1) "" <-- empty ?!
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
the second function returns me:
(1) x86 <-- huh? i have AMD64
(2) java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Client VM (build 11.0-b16, mixed mode, sharing)
(3) ERROR: The system was unable to find the specified registry key or value.
horray! in this version the java version is correct! processor architecture is not empty but totally incorrect and the reg query is still err.
any help is wellcome
note: i only put stuff here, which returns me strange behaviour, most things are working correct with my functions (using the Runtime.getRuntime().exec(command); code)
note2: "reg query "HKLM\HARDWARE\DESCRIPTION\System\CentralProcessor\0" /t REG_SZ" IS working, so why are "some" queries result in ERR, while they are working if typed by hand in cmd.exe?

ok, i exported a jar file and execute it from cmd:
java -jar myjar.jar
now the output is:
(1) "" if called by version 1, possible to retrieve by version 2 (no clue why!)
(2) "java version "1.6.0_10-beta"
Java(TM) SE Runtime Environment (build 1.6.0_10-beta-b25)
Java HotSpot(TM) 64-Bit Server VM (build 11.0-b12, mixed mode)"
(3) C:\Program Files\7-Zip\
so all three problems are gone! (but its a hard way, as i need both functions and parse a lot of text... :/ )
thanks for the tip, that eclipse changes variables (i really did not knew this one...)

Log & Transfer of AVCHD fails to transfer - Write TimeCodeTrack Error -2008

Hi,
I'm testing out my new Canon HF11 and copied the AVCHD directory for a test shot onto my hard drive, created a new project in FCE 4.01, created a Bin, set it to default capture bin, then started Log & Transfer.
When I select the AVCHD directory I see the two clips I recorded, and I can preview them in the L&T preview window. Dragging them to the Transfer Queue works, and I see the spinning disk to indicate it is being processed. After the progress bar reaches 100% the disk stops spinning, but there is nothing in the Bin.
When I click on the clip in the transfer window it changes to indicate there was an error.
Looking in the COnsole log shows:
1/8/09 10:17:02 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] objc[67259]: Class MIOGenericUserDefaults is implemented in both /Applications/Final Cut Express.app/Contents/PlugIns/AVCHD.RADPlug/Contents/MacOS/AVCHD and /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2. Using implementation from /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2.
1/8/09 10:17:03 PM Final Cut Express[67259] WARNING: Using deprecated NSTreeController internal API. Break on 'observedObject' to debug. Use of this method should be replaced by NSTreeNode/representedObject
1/8/09 10:17:03 PM Final Cut Express[67259] WARNING: Using deprecated NSTreeController internal API. Break on 'observedObject' to debug. Use of this method should be replaced by NSTreeNode/representedObject
1/8/09 10:18:25 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] Thu Jan 8 22:18:25 2009 MIOUnit_HelpersQTFileWriterBase.cpp:2508:*WriteTimeCodeTrack ### Err -2008*
1/8/09 10:18:25 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] Thu Jan 8 22:18:25 2009 MIOUnit_HelpersQTFileWriterBase.cpp:1381:*WriteMovieTracks ### Err -2008*
1/8/09 10:18:25 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] Thu Jan 8 22:18:25 2009 MIOUnit_HelpersQTFileWriterBase.cpp:1313:*WriteMovie ### Err -2008*
Help?
Thanks,
Graham

MacPro Dual 2.66 Xeon (2007 model), 8800GT video, 10.5.6
OS and application drive has 463Gigs Free.
Video is being captured to 2 drives - one has 429 Gigs free, the second has 230 Gigs free.
The clip I'm trying to process is 00:01:07 (one minute, 7 seconds). It was recorded on the FH11 at the highest resolution (1920x1080, Cine Mode) and I selected AIC 1920x1080-60I and changed Matrix to Stereo in the L&T properties.

Corrupted iTunes Store Video Download?

I've tried downloading an episode of Scrubs five times now that I bought off of the iTunes music store. But, every time, after it starts processing, it stops downloading and a message pops up saying,
"There was a problem downloading "My Intern's Eyes/Scrubs, Season 5/Scrubs". The file seems to be corrupted. To redownload the file, choose "Check for Purchases" from the
store menu."
Then in the iTunes download menu it says "235 MB of 235 MB Stopped (err=100008)"
Help please! I don't think I'm doing anything wrong...
Home Built PC Windows XP

I tried that email form, and I got this as a reply:
"I have verified that the iTunes Store is functioning and accepting connections, which indicates that the issue is likely related to your internet connection, local network, or your local computer itself. This article outlines some of the likely culprits:
http://www.info.apple.com/kbnum/n300870 "
And the website offered no help at all, and it can't be my internet connection because I just also downloaded a different episode of Scrubs off of iTunes. I think it may be something wrong with the file they're sending to me, not my internet connection, because it works just fine.
So, I went to my Purchase History and sent a message to them specific to the episode, and I think I may get a different response there, who knows.
Thanks for the help, though!

Reflection - How to provide qualified path to class?

Hello folks,
I am writing the application in which user will be able examine any java class at any mapped drive at his PC.
The snipplet is as follows:
import java.lang.reflect.*;
public class ClassInfo {
public static void main( String[] args ) throws Exception {
Class theClass = Class.forName(args[0]);
System.out.println("Class Name: " + theClass.getName());
//Other methods go here
(In GUI application I will provide a FileChooser, of course.)
It works perfectly well as long as the class I want to examine is in the same folder. Example below.
C:\MyFolder>java ClassInfo MyClass
Class Name: MyClass
But when I try to provide the full path to the class outside of that folder - it did not work at all. I am getting ClassNotFound exception. I tried every possible way, such as "C:\\myFolder2\\myClass2� and
"myFolder2.myClass2", etc.
Does someone know how to circumvent this obstacle?
Many thanks at advance.
Vlad

Thank you very much, guys, for your responses. I figured it out. Hopefully, my code will be useful for someone else.
The only limitation is: In the current version it does not handles packages, in other worlds, if the class is a part of a package, such as
package hello;
public class HelloFromHell{
//the rest of the class
I am getting error messge:
Exception in thread "main" java.lang.NoClassDefFoundError: HelloFromHell (wrong name: hello/HelloFromHell) It expects to find the class name in the directory named "hello", which is a package name.
Vlad
import java.io.*;
import java.lang.reflect.*;
import java.net.*;
import javax.swing.*;
public class ClassInfo {
static void displayClassInfo(File file) {
//Get Directory info
File directory = file.getParentFile();
//Get Class name without ".class" ext
String className = file.getName().substring(0,file.getName().length() -".class".length());
try {
//Create the URLClassLoader
URL[] theURL = {directory.toURL()};
URLClassLoader loader1 = new URLClassLoader(theURL);
//Pass class name loader to the forName method
Class theClass = Class.forName(className, true, loader1);
System.out.println("Directory: " + directory.toURL());
System.out.println("Class: " + theClass.getName());
Method[] theMethods = theClass.getDeclaredMethods();
System.out.println("Methods:");
System.out.println("-------");
for (int i = 0; i < theMethods.length; i++) {
System.out.println("Name: " + theMethods.getName());
System.out.println();
//Other reflection methods go here as needed
catch (ClassNotFoundException cnfe) {
System.err.println(cnfe);
System.err.flush();
catch (java.net.MalformedURLException mue) {
System.err.println(mue);
System.err.flush();
//Helper method to prevent user from selecting anything but java classes
static boolean isClass(String fileName) {
if (fileName.endsWith(".class")) {
return true;
return false;
//Method to call JFileChooser dialog thus preventing users from typing
public static void main(String[] args) {
// display a file dialog to the user for file selection
JFileChooser fileChooser = new JFileChooser(System.getProperty("user.dir"));
if (JFileChooser.APPROVE_OPTION == fileChooser.showOpenDialog(new JFrame())) {
if ( (fileChooser.getSelectedFile().getName() != null) &&
(isClass(fileChooser.getSelectedFile().getName()))) {
displayClassInfo(fileChooser.getSelectedFile());
else {
//Handle errors gracefully
System.out.println("No file was selected or file is not a java class.");
System.exit(0);

IOS 4.210 for iPhone 4

when trying to update to ios 4.210 i get this "err = -3259" help!

http://support.apple.com/kb/ts2799
Symptoms
One of the following messages may appear in iTunes:
"iTunes could not connect to the Store. An unknown error occurred (-3259). Make sure your network connection is active and try again."
"There was an error downloading your music (-3259)"
When trying to download purchased music, getting error -3259 message in iTunes
When trying to connect to the iTunes Store, getting error -3259 message
This may occur if you are using an older version of iTunes, having a network connection issue, or when a Firewall protection system on the computer is blocking some communication ports that iTunes need to have open for full functionality.
Products Affected
iTunes Store, Windows XP, Mac OS, iTunes, Windows Vista, Windows OS
Resolution
Update to the latest iTunes software version.
Try turning off your Firewall to see if the issue is resolved (this includes the built-in Firewall or a third-party Firewall such as Norton Personal Firewall, McAfee, Symantec, etc.). See KB #HT1601 for steps if using Windows. See KB #TS1997 for steps if using Mac OS X.

Questions about udld.

Hi there.
Now I've got some strange situation with udld.
there are two cisco switches which is ws6500 and one samsung L2 switch.
The topology is triangle.
c6500---------------c6500
     \                      / (uplink : trunk mode, allowed vlan 80)
       \                   / (uplink : trunk mode, allowed vlan 80)
        samsung L2
          (VLAN80)
just enable udld normal mode on two 6500 swithces.
and the link between samsung and cisco are in trunk mode. and only allowed vlan 80
When I change vlan 80 to 81 on samsung L2 switch, After that,
the link which is conneced to samsung switch on c6500 enters into errdisable mode.
Is it common issue when changing vlan? why the interface enters into err?
help me out !

I can see udld table between c6500s across samsumg L2 switche. like CDP.
The Cisco layer-2 control protocols VTP, DTP, CDP, PAgP and UDLD use all the same destination multicast MAC-address: 01-00-0C-CC-CC-CC. The frames are send untagged on trunks, non-Cisco switches usually treat them as "normal" layer-2 multicast.
So the question is, why did the Samsung switch stop to forward those frames in its native VLAN after you changed the VLAN.
Is the Samsung switch running a rapid spanning-tree mode? If it's non-rapid, maybe the configurattion change made the port to run through Learning and Listening states for 30 seconds (I assume those STP states are port-based, not per-VLAN on Samsung switches)?
The UDLD timers on the 6500 are default (15s)?
Regards
Rolf

Ooo err mmm help?

Similar Messages

Maybe you are looking for