Oop alv

Hi Friends,
   I need to Know abt OOPs ALV. I searched in Forums. Many of them posted. They Have given the below links. But When Links r clicked message given as resources not available. Can anyboby say where it will be available.?
It will be helpful to me.
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
Regards
Feir

Hi,
ALV with OOPs
Also check these links,
ALV with OO
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/99/49b844d61911d2b469006094192fe3/frameset.htm
ALV REPORT WITH OO CONCEPT
http://www.henrikfrank.dk/abapuk.html
http://www.sapdevelopment.co.uk/reporting/alv/alvscr.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
check in se38 type BALV
Please reward if it helps

Similar Messages

  • Oops alv report not getting displayed

    Hi experts,
    I have  REQUIREMENT WHERE I NEED TO DISPLAY THREE REPORTS USING ALAV OOPS.
    I have maintained a FM to call alv rport.
    ,I have two validations to make at to different location in report. The report needs to be displayed only after I perform two different validations.
    Issue is
    I call this ALV reprt Fm once at  :  AT SELECTION SCREEN OUTPUT
    and second time at : START OF SELECTION...
    Now I can see the ALV report ( oops with three reports in one container) very well when i call it from :  AT SECETION SCREEN OUTPUT(  Here I perform one of teh two validations which I have mentioned above...The validation performed here is of Selction screen valiudation).
    ButNow when I perform another validation at START OF SELECTIOn...here I cannot  see the ALV report...TEH screen appearing is blank...
    I am calling teh SAME OOPS ALV Function Module from both the locations...( START of SEL and AT selc O/p)..
    I have debugged teh code and checked teh feidcatalogue genration as well s output table .and also structure
    parameteers .. all of tehm are getting populated in both the cases ,,, but dont know why thye output doesnot appear in th last call..
    please help ., I am stuck up...
    TX a ton in adv...
    Regards,
    KT

    Hi Kshitija T,
    START-OF-SELECTION is processed in PAI of selection screen - as soon as all processing is done, the program flow will return, initialize your program an all of it's objects and display the selection screen again.
    I solved this by disabling the default report status EXECUTE button and used AT-SELECTION-SCREEN events.
    Regards,
    Clemens

  • OOP ALV report custom control performance problem

    HI
    how to write OOP ALV report without custom control.. Actually with custom control which taking long time... and time out happens for huge selection of data..
    Regards
    Roops.

    timeout is not an alv problem. If you try to display a "huge" amount of data, any display technology will fail. Even sap programs fail, their wise solution is to ask user to restrict data to be displayed. Or reduce database selection time, or display amount. Or propose the user to download data as a spool, or output to a file on server.
    Otherwise, read some advices about how to handle timeout in [Note 25528 - Parameter rdisp/max_wprun_time|http://service.sap.com/sap/support/notes/25528].
    About your question, if you still want to try, look at [example code with alv class cl_salv_table for simple display|http://help.sap.com/saphelp_nw2004s/helpdata/en/f9/1ab54099de3726e10000000a1550b0/frameset.htm]

  • How to raise error message from PAI of oops ALV report

    Hi All,
    I have a requirement to raise error message form editable oops alv . After entering the data and then press SAVE button .
    Please help.
    Thanks in Advance

    HI SK,
    Write a Local class (Event Handeler) to handel the events. In Editable ALV once the user enter a value, CL_GUI_ALV_GRID will raise an event called DATA_CHANGED.
    1. Define and Implement a local class to handle that event.
    In the implementation of this class you need to get data from imported object to an internal table, then compare the same with the ALV output table.
    * Local Class to handler the events raised from the ALV Grid
    CLASS LCL_EVENT_HANDLER DEFINITION.
    PUBLIC SECTION.
    * Method to handel EDIT event, DATA_CHANGED of CL_GUI_ALV_GRID
      METHODS : ON_DATA_CHANGE FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
                           IMPORTING ER_DATA_CHANGED.
    ENDCLASS.
    * Event handler class Implementation
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
      METHOD ON_DATA_CHANGE.
        DATA : LT_MODIFY TYPE LVC_T_MODI,
                   LS_MODIFY TYPE LVC_S_MODI.
    * Copying changed data into intenal table from Object
        LT_MODIFY = ER_DATA_CHANGED->MT_MOD_CELLS.
    * Modifying the ouptut table with the changed values
        IF LT_MODIFY[] IS NOT INITIAL.
              *Compare the ALV Output table with LT_MODIFY
        ENDIF.
      ENDMETHOD.
    ENDCLASS.
    Then raise  a message on required condition in the same method.
    Note: To trigger the above method, you need to set event handler before displaying ALV (before calling method SET_TABLE_FOR_FIRST_DISPLAY)
    * Creating object for the Local event handler class
      CREATE OBJECT GR_HANDLER.
    * Set handler (call method of Event_handler) to handler Edit event
      SET HANDLER GR_HANDLER->ON_DATA_CHANGE FOR  GR_GRID.
    Regards,
    Vijay

  • How to find function code for buttons on toolbar in oops alv

    Hi experts,
    I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
    method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALV

    Hi Prakash,
    -->First you have to set the pf status in your alv program by,
    {FORM pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'FIRST'.
    ENDFORM.                    "PF_STATUS}
    -->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
          i_callback_pf_status_set          = 'PF_STATUS'}
    *-->Then doble click on that pf status,
    From the menu bar, select Extras->Adjust Template->List Viewer,
    This will give you the existing statndard gui status of the program*
    ->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
          i_callback_user_command           = 'COMM'
    And make a subroutine of the name 'COMM'i.e,
    FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
      DATA: okcode TYPE sy-ucomm.
      okcode = ucomm.
      CASE okcode.
        WHEN 'REF'.
        CALL FUNCTION 'POPUP_TO_INFORM'
          EXPORTING
            titel         = 'MANSI'
            txt1          = 'CREATED BY'
            txt2          = SY-UNAME
          TXT3          = ' '
          TXT4          = ' '
    endcase.
    Hope it helps you
    Regrds
    Mansi

  • Cell(Row) Selection not display in OOPS ALV

    Hi all,
    I am not able to get the cell(row) selection in the oops ALV when i called it second time.
    I am displaying some information using oops alv  in 100 screen. After user action on 100 screen i am calling 200 screen with different information which is also display in oops alv. When i displaying information in second time the cell(row) selection is not getting displayed.
    For both ALV the fieldcatelog is different.
    Initially i tried using same container but i face same problem, so i am trying to call second alv in new screen.
    But problem remain same.
    Can anyone help me to solve this problem ?
    Regards
    Nilesh

    hi,
    can u send ur report  so dat i can look furhter to it.and help u out

  • List not showing in oops alv .

    Hi expert
    I am new in oops ,I have tried to show the list in oops alv from bkpf table and  followed all steps but could not got any solution.
    While I will give the debugger point after call screen 1010 .It directly shows the screen .
    I can not understand ,what value filled up in fieldcat .
    Please help me ,it's urgent .
    I have paste exact code is in bellow .
    TABLES: bkpf.
    TYPE-POOLS: slis, icon.
    TYPES: BEGIN OF ty_bkpf,
       bukrs TYPE bukrs ,
       belnr TYPE belnr_d ,
       gjahr TYPE gjahr ,
       END OF ty_bkpf .
    DATA : wa_bkpf TYPE ty_bkpf.
    DATA : it_bkpf TYPE STANDARD TABLE OF ty_bkpf.
    DATA: container TYPE REF TO cl_gui_custom_container,
           alv_grid TYPE REF TO cl_gui_alv_grid,
           ok_code LIKE sy-ucomm,
           fieldcat TYPE lvc_t_fcat,
           ls_fcat TYPE lvc_s_fcat.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE t1.
    PARAMETERS:p_bukrs TYPE bukrs .
    SELECTION-SCREEN END OF BLOCK b1 .
    START-OF-SELECTION .
       SELECT bukrs
              belnr
              gjahr
         INTO TABLE it_bkpf
         FROM bkpf
         WHERE bukrs = p_bukrs .
       CALL SCREEN 1010 .
    * Create Controls
       CREATE OBJECT container
              EXPORTING container_name = 'CUSTOM'.
       CREATE OBJECT alv_grid
              EXPORTING  i_parent =  container.
       PERFORM display_fieldcat .
       CALL METHOD alv_grid->set_table_for_first_display
         CHANGING
           it_outtab       = it_bkpf
           it_fieldcatalog = fieldcat.
    FORM display_fieldcat .
       CLEAR: ls_fcat.
       ls_fcat-reptext    = 'BUKRS'.
       ls_fcat-fieldname  = 'BUKRS'.
       ls_fcat-ref_table  = 'it_bkpf'.
       ls_fcat-outputlen  = '18'.
       APPEND ls_fcat TO fieldcat.
       CLEAR: ls_fcat.
       ls_fcat-reptext    = 'BELNR'.
       ls_fcat-fieldname  = 'BELNR'.
       ls_fcat-ref_table  = 'it_bkpf'.
       ls_fcat-outputlen  = '18'.
       APPEND ls_fcat TO fieldcat.
       CLEAR: ls_fcat.
       ls_fcat-reptext    = 'GJAHR'.
       ls_fcat-fieldname  = 'GJAHR'.
       ls_fcat-ref_table  = 'it_bkpf'.
       ls_fcat-outputlen  = '18'.
       APPEND ls_fcat TO fieldcat.
    ENDFORM.                    " display_fieldcat
    module STATUS_1010 output.
    SET PF-STATUS 'ZTEST_SCREEN'.
       SET TITLEBAR text-002.
    endmodule.                 " STATUS_1010  OUTPUT
    *&      Module  USER_COMMAND_1010  INPUT
    *       text
    module USER_COMMAND_1010 input.
       CASE sy-ucomm.
         WHEN 'BACK'.
           LEAVE PROGRAM .
         WHEN 'CANCEL'.
           LEAVE PROGRAM .
         WHEN OTHERS.
       ENDCASE.
    endmodule.                 " USER_COMMAND_1010  INPUT

    Hi,
    dont dispaly data directly,after  creating the both objects for containers and code for fcat and lay out ,
    then execute the report , if you able tos see small grid in corner, u can dispaly internal table by using settable_for_first_display.
    Thanks
    Srini

  • How to set a selected checkbox in output internal table of oops ALV grid

    Hi All,
    i have a checkbox as first column in my ALV grid output using oops alv, when i select some checkbox, that rows have to be selected and i need to process only selected rows in user command.
    i have given the below code also in fieldcatolg.
    f_fldcat-fieldname = 'checkbox'.
    f_fldcat-tabname ='gi_output'
    f_fldcat-checkbox = 'X'.
    f_fldcat-edit = 'X'.
    but the checkbox is not getting set in internal table when i select some checkboxes.
    can anybody explain y the checkbox in internal table not getting set?
    Thanks,
    Srilakshmi.

    Hi,
    i tried already whatever u said, but still not resolved.Pasted my code below..can u please look into it.
    MODULE pbo OUTPUT.
      PERFORM init_container.
      PERFORM prepare_field_catalog.
      PERFORM prepare_layout.
      PERFORM display_output.
    ENDMODULE.                 " PBO  OUTPUT
    *&      Module  PAI  INPUT
          text
    MODULE pai INPUT.
       DATA: lt_rows TYPE lvc_t_row.
      CASE gv_okcode.
        WHEN gc_exit OR gc_back OR gc_canc. " Finish program
          LEAVE PROGRAM.
          when 'PRINT'.
           CALL METHOD gv_grid->get_selected_rows
                     IMPORTING et_index_rows = lt_rows.
            CALL METHOD cl_gui_cfw=>flush.
      ENDCASE.
    ENDMODULE.                 " PAI  INPUT
    *&      Form  INIT_CONTAINER
          text
    FORM init_container .
      CREATE OBJECT gv_custom_container
        EXPORTING
          container_name = gc_container.
      CREATE OBJECT gv_grid
        EXPORTING
          i_parent = gv_custom_container.
      CREATE OBJECT gv_document
        EXPORTING
          style = 'ALV_GRID'.
    *&      Form  PREPARE_FIELD_CATALOG
          text
    FORM prepare_field_catalog .
      PERFORM fill_catalog USING:
    'Table Name'   'Field Name' 'NoZero'   'sel-text'
      'GI_OUTPUT'  'CHECKBOX'   ' '           text-013  'X',
      'GI_OUTPUT'  'KUNNR'      'X'           text-003  ' ',
      'GI_OUTPUT'  'NAME1'      ' '           text-004  ' ',
      'GI_OUTPUT'  'BELNR'      'X'           text-005  ' ',
      'GI_OUTPUT'  'BLART'      ' '           text-006  ' ',
      'GI_OUTPUT'  'BUDAT'      ' '           text-007  ' ',
      'GI_OUTPUT'  'BLDAT'      ' '           text-008  ' ',
      'GI_OUTPUT'  'DMBTR'      ' '           text-009  ' ',
      'GI_OUTPUT'  'WAERS'      ' '           text-010  ' '.
    ENDFORM.                    " PREPARE_FIELD_CATALOG
    *&      Form  FILL_CATALOG
          text
    FORM fill_catalog  USING    fv_tabname
                                fv_fldname
                                fv_nozero
                                fv_seltxt
                                fv_checkbox.
      DATA f_fldcat TYPE lvc_s_fcat.
      f_fldcat-fieldname     = fv_fldname.
      f_fldcat-tabname       = fv_tabname.
      f_fldcat-no_zero       = fv_nozero.
      f_fldcat-coltext       = fv_seltxt.
      f_fldcat-checkbox      = fv_checkbox.
      IF fv_checkbox = gc_x.
        f_fldcat-edit = gc_x.
      ENDIF.
      APPEND f_fldcat TO gi_fieldcat.
    ENDFORM.                    " FILL_CATALOG
    *&      Form  PREPARE_LAYOUT
          text
    FORM prepare_layout .
      gs_layout-info_fname = 'COL'.
      gs_layout-cwidth_opt = gc_x.
      gs_layout-zebra      = gc_x.
      gs_layout-no_toolbar = gc_x.
      gs_layout-no_rowmark = '1'.
      gs_layout-sel_mode = 'A'.
    ENDFORM.                    " PREPARE_LAYOUT
    *&      Form  DISPLAY_OUTPUT
          text
    FORM display_output .
      CALL METHOD gv_grid->set_table_for_first_display
        EXPORTING
          is_layout       = gs_layout
        CHANGING
          it_outtab       = gi_output
          it_fieldcatalog = gi_fieldcat.
      CREATE OBJECT event_receiver.
      SET HANDLER event_receiver->handle_user_command FOR gv_grid.
    CALL METHOD cl_gui_control=>set_focus EXPORTING control = gv_grid.
    ENDFORM.                    " DISPLAY_OUTPUT

  • Runtime error while trying to execute custom F4 help in OOP ALV grid.

    Dear All,
    I am trying to add custom search help for one of my column in ALV grid. I'm using OOP ALV, when i click for search help for that column, the system shows runtime error like below.
    I am new to OOP concept and tried to follow program BCALV_EDIT_03. But not getting this error occur. Please help me.
    With regards.

    Hi,
    In order to be able to provide a search help for a field in an ALV you must do the following things.
    1) The field where F4 help need to be attached needs to be made editable.
    2) Create an event handler class to handle the ONF4 event. You can refer the following code:
        CLASS lcl_alv1_handler DEFINITION.
        PUBLIC SECTION.
           "Tohandle F4 helps
           METHODS handle_f4 FOR EVENT onf4 OF cl_gui_alv_grid
                   IMPORTING e_fieldname e_fieldvalue es_row_no er_event_data
                             et_bad_cells e_display.
        ENDCLASS.
       CLASS lcl_alv1_handler IMPLEMENTATION.
          METHOD handle_f4.
    CASE e_fieldname.
         WHEN 'LIFNR'.               "Set F4 for courier vendor
             SELECT lifnr name1 FROM lfa1 INTO TABLE lt_lifnr.
           IF lt_lifnr IS NOT INITIAL.
             CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
               EXPORTING
                 retfield           = 'LIFNR'
                 window_title   = 'Vendors'
                 value_org       = 'S'
               TABLES
                 value_tab       = lt_lifnr
                 return_tab      = lt_return
               EXCEPTIONS
                 parameter_error = 1
                 no_values_found = 2
                 OTHERS          = 3.
             IF sy-subrc = 0.
               READ TABLE gt_final INTO wa_final_t INDEX es_row_no-row_id.
               IF sy-subrc = 0.
                 READ TABLE lt_return INTO wa_return INDEX 1.
                 IF sy-subrc = 0.
                   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                     EXPORTING
                       input  = wa_return-fieldval
                     IMPORTING
                       output = lv_lifnr.
                   wa_final_t-lifnr  = lv_lifnr.
                   MODIFY gt_final FROM wa_final_t INDEX es_row_no-row_id.
                 ENDIF.
               ENDIF.
             ENDIF.
           ENDIF.
          ENDCASE.
             CALL METHOD o_alv->refresh_table_display.
          ENDMETHOD.
       ENDCLASS.
        In the above method, GT_FINAL-LIFNR is being overwritten by the LIFNR you had selected       from F4 help. So we will call the refresh_table_display after it to see the result in the ALV.
    3) After creating the ALV object, add the fields to which the F4 has to be added. For this you
        need to declare an internal table based on  lvc_t_f4. Use the following code. Here O_ALV is    my ALV object.:
       CREATE OBJECT o_container
           EXPORTING
             container_name              = 'CUSTCON'
           EXCEPTIONS
             cntl_error                  = 1
             cntl_system_error           = 2
             create_error                = 3
             lifetime_error              = 4
             lifetime_dynpro_dynpro_link = 5
             OTHERS                      = 6.
         IF sy-subrc <> 0.
    *     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
         CREATE OBJECT o_alv
           EXPORTING
             i_parent          = o_container
           EXCEPTIONS
             error_cntl_create = 1
             error_cntl_init   = 2
             error_cntl_link   = 3
             error_dp_create   = 4
             OTHERS            = 5.
         IF sy-subrc <> 0.
    *     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
         ENDIF.
       CLEAR : gt_f4, wa_f4.
       wa_f4-fieldname   = 'LIFNR'.
       wa_f4-register    = 'X'.
       wa_f4-getbefore   = space.
       wa_f4-chngeafter  = space.
       APPEND wa_f4 TO gt_f4.
       Here I am assigning F4 to LIFNR field in the final internal table that is displayed using ALV.
       After this register this field for F4.
        CALL METHOD o_alv->register_f4_for_fields
           EXPORTING
              it_f4 = gt_f4.
       CREATE OBJECT o_alv_handler.
       SET HANDLER : o_alv_handler->handle_f4 FOR o_alv1.
       The object o_alv_handler is created based on the event handler class.
    I hope that this will solve your issue. Revert if this is solved.
    Rgards,
    Abijith

  • Tree OOPS ALV - Need to display header & items of the sales order in oops

    HI,
        I need to display some of the header fields of the sales order & items in the oops alv, could you please let me know how to achieve this. I know FM - 'REUSE_ALV_HIERSEQ_LIST_DISPLAY' but how to achieve this through oops alv.
    Thanks

    it is not possible with that function in OO .
    you can try with class cl_salv_hierseq_table
    Just check this Rich's article
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f03986-046c-2910-a5aa-e5364e96ea2c
    if you don't want that then you may have to use ALV tree.

  • Event handling in oops alv

    hi experts,
    event double click.
    when double click  on vbeln it should go to va03 transaction . how would i do that in oops alv.

    hai,
    you can go through code below .
    *& Report  Z_CLARIFY                                                   *
    REPORT  Z_CLARIFY                               .
    DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
    DATA: L_VALID TYPE C,
          V_FLAG,
          V_DATA_CHANGE,
          V_ROW TYPE LVC_S_ROW,
          V_COLUMN TYPE LVC_S_COL,
          V_ROW_NUM TYPE LVC_S_ROID.
    DATA: IT_ROW_NO TYPE LVC_T_ROID,
          X_ROW_NO TYPE LVC_S_ROID.
    DATA:BEGIN OF  ITAB OCCURS 0,
         VBELN LIKE LIKP-VBELN,
         POSNR LIKE LIPS-POSNR,
         CELLCOLOR TYPE LVC_T_SCOL, "required for color
         DROP(10),
         END OF ITAB.
    *The Below Definitions Must.....
    DATA:
    Reference to document
           DG_DYNDOC_ID       TYPE REF TO CL_DD_DOCUMENT,
    Reference to split container
           DG_SPLITTER          TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
    Reference to grid container
           DG_PARENT_GRID     TYPE REF TO CL_GUI_CONTAINER,
    Reference to html container
           DG_HTML_CNTRL        TYPE REF TO CL_GUI_HTML_VIEWER,
    Reference to html container
           DG_PARENT_HTML     TYPE REF TO CL_GUI_CONTAINER.
    "up to here
          CLASS lcl_event_handler DEFINITION
    CLASS LCL_EVENT_HANDLER DEFINITION .
      PUBLIC SECTION .
        METHODS:
    **Hot spot Handler
        HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                          IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
    **Double Click Handler
        HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                                         IMPORTING E_ROW E_COLUMN ES_ROW_NO,
        TOP_OF_PAGE FOR EVENT TOP_OF_PAGE              "event handler
                             OF CL_GUI_ALV_GRID
                             IMPORTING E_DYNDOC_ID.
           END_OF_LIST FOR EVENT end_of_list              "event handler
                            OF CL_GUI_ALV_GRID
                            IMPORTING E_DYNDOC_ID.
    ENDCLASS.                    "lcl_event_handler DEFINITION
          CLASS lcl_event_handler IMPLEMENTATION
    CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
    *Handle Hotspot Click
      METHOD HANDLE_HOTSPOT_CLICK .
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW_ID.
        V_COLUMN = E_COLUMN_ID.
        V_ROW_NUM = ES_ROW_NO.
       MESSAGE I000 WITH V_ROW 'clicked'.
        CLEAR IT_ROW_NO[].
        X_ROW_NO-ROW_ID = V_ROW.
        APPEND X_ROW_NO TO IT_ROW_NO .
        CALL METHOD G_GRID->SET_SELECTED_ROWS
          EXPORTING
            IT_ROW_NO = IT_ROW_NO.
      ENDMETHOD.                    "lcl_event_handler
    *Handle Double Click
      METHOD  HANDLE_DOUBLE_CLICK.
        CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
        V_ROW  = E_ROW.
        V_COLUMN = E_COLUMN.
        V_ROW_NUM = ES_ROW_NO.
        IF E_COLUMN = 'VBELN'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
        ENDIF.
        IF E_COLUMN = 'POSNR'.
          SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
          CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN."
        ENDIF.
      ENDMETHOD.                    "handle_double_click
    METHOD END_OF_LIST.                   "implementation
    Top-of-page event
       PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
    ENDMETHOD.                            "top_of_page
        METHOD TOP_OF_PAGE.                   "implementation
    Top-of-page event
        PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
      ENDMETHOD.                            "top_of_page
    ENDCLASS.                    "LCL_EVENT_HANDLER IMPLEMENTATION
    *&             Global Definitions
    DATA:      G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
    "Container1
                G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
    DATA: OK_CODE LIKE SY-UCOMM,
          SAVE_OK LIKE SY-UCOMM,
          G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
          GS_LAYOUT TYPE LVC_S_LAYO.
    data: v_lines type i.
    data: v_line(3) type c.
    *- Fieldcatalog for First and second Report
    DATA: IT_FIELDCAT  TYPE  LVC_T_FCAT,
          X_FIELDCAT TYPE LVC_S_FCAT,
          LS_VARI  TYPE DISVARIANT.
                   START-OF_SELECTION
    START-OF-SELECTION.
      SELECT VBELN
             POSNR
             FROM LIPS
             UP TO 20 ROWS
             INTO CORRESPONDING FIELDS OF TABLE ITAB.
    describe table itab lines v_lines.
    END-OF-SELECTION.
      IF NOT ITAB[] IS INITIAL.
        CALL SCREEN 100.
      ELSE.
       MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
      ENDIF.
    *&      Form  CREATE_AND_INIT_ALV
          text
    FORM CREATE_AND_INIT_ALV .
      DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
      "attention.....from here
      "split your container here...into two parts
      "create the container
      CREATE OBJECT G_CUSTOM_CONTAINER
               EXPORTING CONTAINER_NAME = 'SCR100_CUST'.
      "this is for top of page
    Create TOP-Document
      CREATE OBJECT DG_DYNDOC_ID
                       EXPORTING STYLE = 'ALV_GRID'.
    Create Splitter for custom_container
      CREATE OBJECT DG_SPLITTER
                 EXPORTING PARENT  = G_CUSTOM_CONTAINER
                           ROWS    = 2
                           COLUMNS = 1.
    Split the custom_container to two containers and move the reference
    to receiving containers g_parent_html and g_parent_grid
      "i am allocating the space for grid and top of page
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 1
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_HTML.
      CALL METHOD DG_SPLITTER->GET_CONTAINER
        EXPORTING
          ROW       = 2
          COLUMN    = 1
        RECEIVING
          CONTAINER = DG_PARENT_GRID.
    CALL METHOD DG_SPLITTER->GET_CONTAINER
       EXPORTING
         ROW       = 2
         COLUMN    = 1
       RECEIVING
         CONTAINER = DG_PARENT_HTML.
    CALL METHOD DG_SPLITTER->GET_CONTAINER
       EXPORTING
         ROW       = 1
         COLUMN    = 1
       RECEIVING
         CONTAINER = DG_PARENT_GRID.
      "you can set the height of it
    Set height for g_parent_html
      CALL METHOD DG_SPLITTER->SET_ROW_HEIGHT
        EXPORTING
          ID     = 1
          HEIGHT = 5.
      "from here as usual..you need to specify parent as splitter part
      "which we alloted for grid
      CREATE OBJECT G_GRID
             EXPORTING I_PARENT = DG_PARENT_GRID.
    Set a titlebar for the grid control
      CLEAR GS_LAYOUT.
      GS_LAYOUT-GRID_TITLE = TEXT-003.
      GS_LAYOUT-ZEBRA = SPACE.
      GS_LAYOUT-CWIDTH_OPT = 'X'.
      GS_LAYOUT-NO_ROWMARK = 'X'.
      GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
      CALL METHOD G_GRID->REGISTER_EDIT_EVENT
        EXPORTING
          I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_ENTER.
      CREATE OBJECT G_HANDLER.
      SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
      SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
    SET HANDLER G_HANDLER->END_OF_LIST FOR G_GRID.
      SET HANDLER G_HANDLER->TOP_OF_PAGE FOR G_GRID.
      DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
      DATA: L_INDEX TYPE SY-TABIX.
      "Here i am changing the color of line 1,5,10...
      "so you can change the color of font conditionally
      LOOP AT ITAB.
        L_INDEX = SY-TABIX.
        IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
          LS_CELLCOLOR-FNAME = 'VBELN'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
          LS_CELLCOLOR-FNAME = 'POSNR'.
          LS_CELLCOLOR-COLOR-COL = '6'.
          LS_CELLCOLOR-COLOR-INT = '0'.
          LS_CELLCOLOR-COLOR-INV = '1'.
          APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
          MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
        ENDIF.
      ENDLOOP.
    setting focus for created grid control
      CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
        EXPORTING
          CONTROL = G_GRID.
    Build fieldcat and set editable for date and reason code
    edit enabled. Assign a handle for the dropdown listbox.
      PERFORM BUILD_FIELDCAT.
      PERFORM  SET_DRDN_TABLE.
    Optionally restrict generic functions to 'change only'.
      (The user shall not be able to add new lines).
      PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
    **Vaiant to save the layout
      LS_VARI-REPORT      = SY-REPID.
      LS_VARI-HANDLE      = SPACE.
      LS_VARI-LOG_GROUP   = SPACE.
      LS_VARI-USERNAME    = SPACE.
      LS_VARI-VARIANT     = SPACE.
      LS_VARI-TEXT        = SPACE.
      LS_VARI-DEPENDVARS  = SPACE.
    **Calling the Method for ALV output
      CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
          IS_VARIANT           = LS_VARI
          IS_LAYOUT            = GS_LAYOUT
          I_SAVE               = 'A'
        CHANGING
          IT_FIELDCATALOG      = IT_FIELDCAT
          IT_OUTTAB            = ITAB[].
      "do these..{
    Initializing document
      CALL METHOD DG_DYNDOC_ID->INITIALIZE_DOCUMENT.
    Processing events
      CALL METHOD G_GRID->LIST_PROCESSING_EVENTS
        EXPORTING
          I_EVENT_NAME = 'TOP_OF_PAGE'
          I_DYNDOC_ID  = DG_DYNDOC_ID.
      "end }
    Set editable cells to ready for input initially
      CALL METHOD G_GRID->SET_READY_FOR_INPUT
        EXPORTING
          I_READY_FOR_INPUT = 1.
    ENDFORM.                               "CREATE_AND_INIT_ALV
    *&      Form  EXCLUDE_TB_FUNCTIONS
          text
         -->PT_EXCLUDE text
    FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
    Only allow to change data not to create new entries (exclude
    generic functions).
      DATA LS_EXCLUDE TYPE UI_FUNC.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
      LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
      APPEND LS_EXCLUDE TO PT_EXCLUDE.
    ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
    *&      Form  build_fieldcat
          Fieldcatalog
    FORM BUILD_FIELDCAT .
      DATA: L_POS TYPE I.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
      X_FIELDCAT-FIELDNAME = 'VBELN'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-NO_ZERO    = 'X'.
      X_FIELDCAT-OUTPUTLEN = '10'.
      X_FIELDCAT-HOTSPOT = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Item'(025).
      X_FIELDCAT-FIELDNAME = 'POSNR'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
      L_POS = L_POS + 1.
      X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
      X_FIELDCAT-FIELDNAME = 'DROP'.
      X_FIELDCAT-TABNAME = 'IT_FINAL'.
      X_FIELDCAT-COL_POS    = L_POS.
      X_FIELDCAT-OUTPUTLEN = '5'.
      X_FIELDCAT-EDIT = 'X'.
      X_FIELDCAT-DRDN_HNDL = '1'.
      X_FIELDCAT-DRDN_ALIAS = 'X'.
      APPEND X_FIELDCAT TO IT_FIELDCAT.
      CLEAR X_FIELDCAT.
    ENDFORM.                    " build_fieldcat
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'MAIN100'.
      SET TITLEBAR 'MAIN100'.
      IF G_CUSTOM_CONTAINER IS INITIAL.
    **Initializing the grid and calling the fm to Display the O/P
        PERFORM CREATE_AND_INIT_ALV.
      ENDIF.
    ENDMODULE.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE USER_COMMAND_0100 INPUT.
      CASE SY-UCOMM.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    there are many such examples
    goto->se38->type bcalv* and press f4, u can see many examples.
    Reward points if helpful.
    Thanks and regards
    Swetha Singh.

  • Need a sample program for hierarchial oops ALV report

    Hello experts,
                     I Need a sample program for hierarchial oops ALV report.

    Hi,
       Check the following sample code...
    T A B L E S
    tables : ekko.
      data definition
    types : begin of ty_ekko,
              ebeln type ekko-ebeln,
              lifnr type ekko-lifnr,
              bsart type ekko-bsart,
              aedat type ekko-aedat,
              ernam type ekko-ernam,
            end of ty_ekko.
    types : begin of ty_eket,
               ebeln type ekpo-ebeln,
               ebelp type ekpo-ebelp,
               werks type ekpo-werks,
               matnr type ekpo-matnr,
               menge type eket-menge,
               wamng type eket-wamng,
               netpr type ekpo-netpr,
            end of ty_eket.
    data : it_ekko type table of ty_ekko,
           it_eket type table of ty_eket.
    data: ob_hieralv type ref to cl_salv_hierseq_table.
    data: it_binding type salv_t_hierseq_binding,
          is_binding type salv_s_hierseq_binding.
    S E L C T O P T I O N S
    select-options : s_ebeln for ekko-ebeln.
    S T A R T O F S E L E C T I O N
    start-of-selection.
    select ebeln
           lifnr
           bsart
           aedat
           ernam from ekko
    into corresponding fields of table it_ekko
    where ebeln in s_ebeln.
    if sy-subrc eq 0.
    select aebeln aebelp
           awerks amatnr
           bmenge bwamng
           a~netpr from ekpo as a join eket as b
                     on  amandt = bmandt
                     and aebeln = bebeln
                     and aebelp = bebelp
                   into corresponding fields of table it_eket
                  where a~ebeln in s_ebeln.
    endif.
    is_binding-master = 'EBELN'.
    is_binding-slave = 'EBELN'.
    append is_binding to it_binding.
    *TRY.
    call method cl_salv_hierseq_table=>factory
    exporting
    t_binding_level1_level2 = it_binding
    importing
    r_hierseq = ob_hieralv
    changing
    t_table_level1 = it_ekko
    t_table_level2 = it_eket .
    *CATCH cx_salv_data_error .
    *CATCH cx_salv_not_found .
    *ENDTRY.
    call method ob_hieralv->display( ).
    Cheers,
    Ram

  • How to add the REFRESH button in OOPs ALV grid

    how to add the REFRESH button in OOPs ALV grid

    Hi Naidu.
    Check the below code:
    Local Class Definition and implementation For events handeling
    CLASS LCL_EVENT DEFINITION .
      PUBLIC SECTION.
        METHODS :TOOLBAR FOR EVENT TOOLBAR OF  CL_GUI_ALV_GRID
                         IMPORTING E_OBJECT,
                 USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                         IMPORTING E_UCOMM.
    ENDCLASS.    
    CLASS LCL_EVENT IMPLEMENTATION.
      METHOD TOOLBAR.
        WA_TOOL-FUNCTION = 'ZFC1'.
        WA_TOOL-TEXT     = 'TEST'.
        WA_TOOL-ICON     = '@EA@'.
        APPEND WA_TOOL TO E_OBJECT->MT_TOOLBAR.
      ENDMETHOD.             "DISPLAY
      METHOD USER_COMMAND.
        IF E_UCOMM = 'ZFC1'.
              ENDIF.
      ENDMETHOD.                    "USER_COMMAND
    ENDCLASS.                    "LCL_EVENT IMPLEMENTATION
    MODULE STATUS_0200 OUTPUT.
      SET PF-STATUS 'ZALV_BTON'.
      SELECT * FROM VBAK INTO TABLE GT_VBAK
               UP TO 30 ROWS.
    **** CREATE CONTAINER OBJECT
      CREATE OBJECT MY_CONTAINER
        EXPORTING
          CONTAINER_NAME              = 'CC1'
         EXCEPTIONS
          CNTL_ERROR                  = 1
          CNTL_SYSTEM_ERROR           = 2
          CREATE_ERROR                = 3
          LIFETIME_ERROR              = 4
          LIFETIME_DYNPRO_DYNPRO_LINK = 5
          OTHERS                      = 6 .
    ****** GRID TO CONTAINER
      CREATE OBJECT ALV
          EXPORTING
          I_PARENT          = MY_CONTAINER
         EXCEPTIONS
          ERROR_CNTL_CREATE = 1
          ERROR_CNTL_INIT   = 2
          ERROR_CNTL_LINK   = 3
          ERROR_DP_CREATE   = 4
          OTHERS            = 5.
      CREATE OBJECT OBJ.
      SET HANDLER : OBJ->TOOLBAR FOR ALV.
      SET HANDLER : OBJ->USER_COMMAND FOR ALV.
    ****** ALV DISPLAY
      CALL METHOD ALV->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          I_STRUCTURE_NAME              = 'VBAK'
        CHANGING
          IT_OUTTAB                     = GT_VBAK[]
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          TOO_MANY_LINES                = 3
          OTHERS                        = 4.
    ENDMODULE.                 " STATUS_0200  OUTPUT
    *&      Module  USER_COMMAND_0200  INPUT
    *       text
    MODULE USER_COMMAND_0200 INPUT.
      IF SY-UCOMM EQ 'BACK'.
        LEAVE PROGRAM.
      ENDIF.
    ENDMODULE.                 " USER_COMMAND_0200  INPUT
    Regards
    Kumar M

  • Handling error messages in OOPs ALV

    The question below is foolish.But I am a beginner so please excuse.
    I have successfully displayed an OOPs ALV which displays the material, batch and plant.
    A custom toolbar button(delete batches) has been appended to the standard toolbar.
    Now when I do not select any rows from the ALV  and click the button(delete batches) I have ensured that an error message flahes at the bottom of the screen.
    If I repeat the same procedure without coming out of the program it exits from the program itself. i want to avoid this.
    I want to flash the error message continually without coming out of the program till the user commits the mistake. Please note that I have not used any leave screen commands etc.
    Can someone please help me..
    Thanks in advance

    I assume you have the ON TOOLBAR event regiistered and the ENTER event for example.
    method constructor .
    create object grid_container1
            exporting
    *           container_name = 'CCONTAINER1'.
        container_name = cfname.
        create object  grid1
           exporting
              i_parent = grid_container1.
        set handler z_object->on_user_command for grid1.
        set handler z_object->on_toolbar for grid1.
        set handler z_object->handle_data_changed for grid1.
        set handler z_object->handle_data_changed_finished for grid1.
        set handler z_object->on_dubbelklik for grid1.
        set handler z_object->on_hotspot for grid1.
        call method grid1->register_edit_event
            exporting
               i_event_id = cl_gui_alv_grid=>mc_evt_enter.
      endmethod.
    So the easy way to do this is in your ON USER COMMAND routine when you can check to see if you selected any rows and the issue a popup warnimg message with the standard SAP MESSAGE statement.
    For example in my TEST function here I call a method to get the selected cell.
    If none are selected you can then issue your message and you will then be returned back to your GRID display after the user presses the OK button on the message popup.
    the grid1 object refers to the class cl_gui_alv_grid.
    in your case call a method that gets selected cells rather than selected cell. Use the standard method in cl_gui_alv_grid.
    If nothing selected then issue your message.
    (Note that your method ON DATA CHANGE / ON DATA CHANGED FINISHED might also be entered as well  so insure that you haven't got any coding in these methods that will interfere with processing flow).
    method on_user_command .
    *        FOR EVENT before_user_command OF cl_gui_alv_grid
    *        IMPORTING
    *          e_ucomm
    *          sender
    case e_ucomm.
          when 'EXIT'.
            leave program.
          when 'EXCEL'.
           call method me->download_to_excel.
          when 'SAVE'.
          when 'PROC'.
            call method me->process.
          when 'REFR'.
            call method me->refresh.
            when 'SWITCH'.
            call method me->switch.
           when 'TEST'.
            call method me->get_cell.
           endcase.
    method get_cell .
    break-point 1.
    call method grid1->get_current_cell
    importing
    e_row     = ls_row
    e_value   = ls_value
    e_col     = ls_col
    es_row_id = ls_row_id
    es_col_id = ls_col_id
    es_row_no = ls_row_no.
    endmethod.
    cheers
    jimbo

  • Perform setting OOP ALV for multiple reports using Field Symbols

    Hi, Abapers ... i try to write a programme which using ONE oop ALV but 2 different structure internal table. the last result should be 2 radio button. first button is r_wbs and 2ns r_kpi. r_wbs will display 4 column answer and r_kpi will display 10 columns answer with different column name. i successfully implemented using FIELDS SYMBOLS but the problems i failed to perform customized setting forALV (report's tittle, column name, different layout etc)  for 2 different reports.  this is the programme. Please Give Opinion, simple example will be more helpful. Thanks You Very Much
    *&this report experimental how to print into ONE alv
    *&with 2 diffrent structure internal table
    REPORT  zfiroopalv.
    SELECTION-SCREEN BEGIN OF BLOCK mode WITH FRAME TITLE text-002.
    PARAMETERS r_wbs RADIOBUTTON GROUP mode DEFAULT 'X'.
    PARAMETERS r_kpi RADIOBUTTON GROUP mode.
    SELECTION-SCREEN END OF BLOCK mode.
    CLASS lcl_main DEFINITION.
    PUBLIC SECTION.
    CLASS-DATA: md_wbs TYPE c LENGTH 1.
    METHODS: process,
             write.
    DATA: mdo_data TYPE REF TO data.
    TYPES: BEGIN OF st_wbs,
    rsnum TYPE zmeime002a-rsnum,
    rspos TYPE zmeime002a-rspos,
    a TYPE zmmgitab01-menge,
    b TYPE zmeime002a-bdmng,
    c TYPE zmeime002a-bdmng,
    d TYPE zmeime002a-bdmng,
    e TYPE zmeime002a-bdmng,
    f TYPE zmmgitab01-menge,
    g TYPE zmmgitab01-menge,
    END OF st_wbs.
    TYPES: BEGIN OF st_kpi,
    regio TYPE zmeime002a-regio,
    gsber TYPE zmeime002a-gsber,
    gtext TYPE zmeime002a-gtext,
    x TYPE zmmgitab01-menge,
    y TYPE zmmgitab01-menge,
    z TYPE zmmgitab01-menge,
    END OF st_kpi.
    CLASS-DATA: it_wbs TYPE TABLE OF st_wbs,
                wa_wbs LIKE LINE OF it_wbs.
    CLASS-DATA: it_kpi TYPE TABLE OF st_kpi,
                wa_kpi LIKE LINE OF it_kpi.
    PRIVATE SECTION.
    DATA: set_display_setting TYPE REF TO cl_salv_table.
    DATA: display_settings TYPE REF TO cl_salv_display_settings.
    DATA: salv_table TYPE REF TO cl_salv_table.
    DATA: error TYPE REF TO cx_root.
    DATA: errtext TYPE string.
    ENDCLASS.
    CLASS lcl_kpi DEFINITION INHERITING FROM lcl_main.
    PUBLIC SECTION.
    METHODS: process_kpi.
    PRIVATE SECTION.
    ENDCLASS.
    * C.L.A.S.S lcl_main D.E.F.I.N.I.T.I.O.N
    CLASS lcl_wbs DEFINITION INHERITING FROM lcl_main.
    PUBLIC SECTION.
    METHODS: process_wbs.
    PRIVATE SECTION.
    ENDCLASS.
    * m.a.i.n. .p.r.o.g.r.a.m.
    START-OF-SELECTION.
      DATA: o_main TYPE REF TO lcl_main.
    DATA: p_wbs TYPE c.
    CREATE OBJECT o_main.
      CASE 'X'.
      WHEN r_wbs.
          o_main->md_wbs = 'X'.
      WHEN r_kpi.
          o_main->md_wbs = ' '.
      ENDCASE.
      o_main->process( ).
      o_main->write( ).
    CLASS lcl_main IMPLEMENTATION.
    *ENDMETHOD.
    METHOD process.  " NOTE: public method
    DATA: o_main TYPE REF TO lcl_main,
          o_wbs TYPE REF TO lcl_wbs,
          o_kpi TYPE REF TO lcl_kpi.
    CREATE OBJECT: o_wbs,o_kpi.
      IF ( me->md_wbs = 'X' ).
          CALL METHOD o_wbs->process_wbs( ).  " NOTE: private method
          GET REFERENCE OF me->it_wbs INTO me->mdo_data.
      ELSE.
          CALL METHOD o_kpi->process_kpi( ).  " NOTE: private method
          GET REFERENCE OF me->it_kpi INTO me->mdo_data.
      ENDIF.
    ENDMETHOD.
    METHOD write.
    FIELD-SYMBOLS:
      <lt_outtab>    TYPE table.
      ASSIGN me->mdo_data->* TO <lt_outtab>.
    cl_salv_table=>factory(
    EXPORTING
    list_display = if_salv_c_bool_sap=>false
    IMPORTING
    r_salv_table = salv_table
    CHANGING
    t_table = <lt_outtab>
    salv_table->display( ).
    ENDMETHOD.
    ENDCLASS.
    CLASS lcl_kpi IMPLEMENTATION.
    METHOD process_kpi.
    *********** run some select statement into it_kpi*******
    ENDMETHOD.
    ENDCLASS.
    CLASS lcl_wbs IMPLEMENTATION.
    METHOD process_wbs.
    *********** run some select statement into it_wbs*******
    ENDMETHOD.
    ENDCLASS.

    Hi,
    I had similar requirement wherein I was supposed to display different data using 2 different internal tables on a subscreen area.
    The screen consists of two parts: 1) selection-screen with few input fields and two buttons 2) Subscreen area where the report need to be displayed. This report is displayed based on the button that the user is selecting. For this I have done the following things:
    1. Capture the sy-ucomm when user is clicking on any of the two buttons in PAI. Then perform data fetch operation.
             MODULE USER_COMMAND_9003 INPUT.
                 CASE OK_CODE.
                     WHEN 'DETAIL'.
                       GV_RPT = OK_CODE.
                       PERFORM F_GET_DETAIL_DATA.
                     WHEN 'REPORT'.
                       GV_RPT = OK_CODE.
                       PERFORM F_GET_REPT_DATA.
                   ENDCASE.
             ENDMODULE.                 " USER_COMMAND_9003  INPUT
    2.  Declare two different ALV's with the fieldcat similar to 2 internal tables respectively. Use the above sy-ucomm PBO to call appropriate ALV.
             MODULE DISPLAY_ALV OUTPUT.
               IF GV_RPT EQ 'DETAIL'.
                 PERFORM F_FIELDCAT_DETAIL.
                 PERFORM F_LAYOUT_DETAIL.
                 PERFORM F_EXCLUDE_TOOLBAR_DETAIL.
                 PERFORM F_DISPLAY_ALV_DETAIL.
               ELSEIF GV_RPT EQ 'REPORT'.
                 PERFORM F_FIELDCAT_REPT.
                 PERFORM F_LAYOUT_REPT.
                 PERFORM F_EXCLUDE_TOOLBAR_REPT.
                 PERFORM F_DISPLAY_ALV_REPT.
               ENDIF.
             ENDMODULE.                 " DISPLAY_ALV  OUTPUT
    3. Before displaying ALV you need to free the container and ALV.
    FORM F_DISPLAY_ALV_DETAIL .
    IF GC_CONTAINER_ES IS NOT INITIAL.
        CALL METHOD GC_CONTAINER_ES->FREE
          EXCEPTIONS
            CNTL_ERROR        = 1
            CNTL_SYSTEM_ERROR = 2
            OTHERS            = 3.
        IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.
      IF GC_ALV_GRID_ES IS NOT INITIAL.
        CALL METHOD GC_ALV_GRID_ES->FREE
          EXCEPTIONS
            CNTL_ERROR        = 1
            CNTL_SYSTEM_ERROR = 2
            OTHERS            = 3.
        IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.
      IF GC_CONTAINER_TB IS NOT INITIAL.
        CALL METHOD GC_CONTAINER_TB->FREE
          EXCEPTIONS
            CNTL_ERROR        = 1
            CNTL_SYSTEM_ERROR = 2
            OTHERS            = 3.
        IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.
      IF GC_ALV_GRID_TB IS NOT INITIAL.
        CALL METHOD GC_ALV_GRID_TB->FREE
          EXCEPTIONS
            CNTL_ERROR        = 1
            CNTL_SYSTEM_ERROR = 2
            OTHERS            = 3.
        IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.
      CREATE OBJECT GC_CONTAINER_ES
        EXPORTING
          CONTAINER_NAME              = 'CC_9003'
        EXCEPTIONS
          CNTL_ERROR                  = 1
          CNTL_SYSTEM_ERROR           = 2
          CREATE_ERROR                = 3
          LIFETIME_ERROR              = 4
          LIFETIME_DYNPRO_DYNPRO_LINK = 5
          OTHERS                      = 6.
      CREATE OBJECT GC_ALV_GRID_ES
        EXPORTING
          I_PARENT          = GC_CONTAINER_ES
        EXCEPTIONS
          ERROR_CNTL_CREATE = 1
          ERROR_CNTL_INIT   = 2
          ERROR_CNTL_LINK   = 3
          ERROR_DP_CREATE   = 4
          OTHERS            = 5.
      CALL METHOD GC_ALV_GRID_ES->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          IS_LAYOUT                     = GS_LAYOUT_ES
          IT_TOOLBAR_EXCLUDING          = GT_TOOLBAR_ES
        CHANGING
          IT_OUTTAB                     = GT_ES_REPT
          IT_FIELDCATALOG               = GT_FIELDCAT_ES
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          TOO_MANY_LINES                = 3
          OTHERS                        = 4.
    ENDFORM.                    " F_DISPLAY_ALV_DETAIL
    Similarly define the FORM F_DISPLAY_ALV_REPT.     
    Hope this will be useful for you. If you have any more queries let me know.

  • DIfference Between OOPS ALV and WEBDYNPRO FOR ABAP ALV?

    Hi to All,
    i want some information that What is main difference when we develop ALV Report in OOPS and WEBDYNPRO For ABAP.which is good n in what way it is good?
    In the Same way I m also want know that WHICH IS BETTER AMONG WEBDYNPRO FOR JAVA/ABAP.In which way?
    Regards,
    Ravi K

    Thanku for ur valuble Information.
    could u give me information regarding OOPS ALV and WEBDYNPRO FOR ABAP ALV?which is better?is there differences?
    Edited by: ravi k on Mar 26, 2008 12:23 PM

Maybe you are looking for